Photoshop will not resize images

As of today, PSE will not resize images for me.  I typically use PSE for this function and am familiar with it.
I thought it might have been the windows update that occurred last night, so I restored my system earlier, but it does not help.  I still can't resize images.  Any thoughts?  Thanks.

Operating system?
PSE version?
What are the exact steps you're doing?
What are the details of what's happening when you try?
Ken

Similar Messages

  • My iPad will not resize images for the wallpaper

    My iPad will not resize images for the wallpaper

    if you go in through the photos app and send your image to be wallpaper you'll have a bit more luck.
    Also, go into the settings, accessibility and try turning off parallax motion.

  • CS3 Photoshop will not load images

    I have just recently run into a problem with my CS3 Photoshop. When I try to go through File> Open and choose a .jpg .gif and even .psd file I get an error message saying: ' could not complete your request because it is not the right kind of document.'
    When I open in Illustrator there is no issue. Or when I go directly to the file and use Open with, then direct it to Photoshop it opens fine.  However, if I need to open another image file I get the error message again. What can I do with this?
    Christine Cullum

    Try resetting your preferences as described in the FAQ.
    http://forums.adobe.com/thread/375776?tstart=0
    You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
    This resets all settings in Photoshop to factory defaults.
    A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

  • Photoshop will not open images

    I fired up Photoshop CC 2014 just now to merge some images. After the dialogue pops up, nothing happens when I press OK. Also tried to open some images and nothing happens either. Any ideas?
    Last time I used it was a few weeks ago and there wasn't any problems. Nothing has been done to computer aside from the usual security updates to Windows. Tried to uninstall and reinstall to no avail either.
    Any ideas? Thanks!

    Okay. Just to verify the reset worked, did you see this:
    Benjamin

  • Right click image in Bridge CS3 will not open images in Photoshop

    Hi,
    New to Bridge here.
    I have a problem where I can double click an image (jpg, cr2, tiff, it does not matter what type) or right click + open or right click + open with Photoshop but Photoshop will not start.
    For jpgs, if I right click + open with Internet Explorer, it will open the jpg in IE.
    Thanks.

    Several different things to look at.
    Go to edit/preferences/file type associations and see what the default settings are.  THe ones you mentioned should be set to CS3.
    You can also right click on a photo and set open with CS3.
    If that does not solve it there are also file associations in Windows that can be changed.

  • Components will not resize correctly in Catalyst

    Download PSD: http://dl.dropbox.com/u/814249/campusariel.psd
    Download FXP: http://dl.dropbox.com/u/814249/campusariel.fxp
    I am completely new to Flash Catalyst (any and all versions). I am currently using Photoshop CS5.5 to design and Catalyst 5.5 to import and translate into a flash project. I recently picked up a job creating an interactive application for a college campus. I have attached my two project files for anyone who can help to view to see what is wrong. I have also attached inline screenies for those who cannot/will not download.
    Here is my problem: I created the attached PSD in Photoshop with what I thought were the correct layers and groups/folders. I am hoping to achieve the following effect: when a user rolls over the purple buttons, multiple similar copies of that button that are initially hidden beneath the visible one popup in sequence above the rolled over purple button.
    Ex. State 1:
    Animation/Action Sequence to the following:
    The purple popup objects will have their own text content and will be buttons themselves that a user clicks to change to a different state with more specific information.
    Not only am I unsure of how to create such animation/action sequence, my purple components (whether I actually convert them to components in Catalyst or not) will not resize correctly. NOTE: I did click the resizable option when importing the PSD into Catalyst. The following effect occurs both ways. I add constraints to all objects by selecting all, right clicking, and choosing add constraints to all; the following occurs when stretched inwards using the resize test handle:
    and this when stretched out:
    When viewed using CTRL+Enter, the application is nowhere near resized in the browser window. I must be missing something, especially being new to Catalyst. I tried flattening the image in Photoshop, which obviously allowed the image to be easily resizable in Catalyst and the test browser window. However, I cannot use my separate elements when flattened; flattening defeats the purpose of Catalyst if I'm not mistaken.
    Any guidance?
    Message was edited by: joshlev

    Hi Martin - Those are really good questions! I did check and the image is uploaded. I assume I can see the image in my one browser because of the cache  since I could not see it on several computers that I had never pulled the site up on before.
    And actually I have it working now. Nancy had a good idea to check to see if I saved it as CMYK instead of RGB. When I went to go open the file on my computer Photoshop and Fireworks had an error in opening it. They had a problem opening the one I downloaded from the ftp too. It just looks like somehow the file became corrupted! Not sure how, but that seems like what the problem was since I have a new image up there now and it's working fine again.
    Thanks for all your help!
    Liz

  • Photoshop will not open some of my files

    I recently had a hard drive crash. I sent it to a recovery company and they returned my files on a new hard drive. Many of the images were recovered but some show up as CR2 files or psd files that photoshop will not open. The message says that this is a file format that PS does not recognize. These files seem to be no different from my other CR2 files and psd. files but the thumbnails don't show up in Bridge and PS will not open them. Can anyone tell me how to get these files to open?

    I thought this following suggestion to use GIMP to open stubborn PSD files was brilliant:
    http://forums.adobe.com/message/3306200#3306200
    you may also want to try using the DNG converter with your CR2 files:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4923
    it's worth a try, but it's a long shot.

  • The properties menu will not resize

    I am new to Captivate; most familiar with Lectora.   I am attempting to customize buttons using saved images; however, the properties panel will not resize prohibiting me from selecting the ‘browse’ key.  I have tried resetting the workspace, undocking the properties panel, closing the document and reopening.  I am running out of options.  Any assistance will be more than appreciated.

    Welcome,
    Sighing, the Properties panel cannot be resized beyond a certain maximum. Apparently there is some long label name somewhere, probably with your custom image buttons. Why not fill a shape with an image and use that as a button? Just a personal remark, since CP6 I never use custom image buttons anymore.
    Since you already retried resetting workspace, another workspace, here is the only workaround I know that will increase the width of that panel: drag it to the docking station at the bottom (with the Timeline) and it will resize to the width of that station. Even making it floating will not succeed in making it wider.
    Lilybiri

  • Some Panels will not Resize

    Working on Windows XP SP2, IDCS3. A friend's paragraph panel and one other panel will not resize. All other panels function normally.
    We tried:
    - Resetting her preferences
    - Resetting her panels
    - Closing and reopening the particular 2 panels
    - Moving the panels to different parts of the screen (docked, undocked)
    No luck. Any ideas?

    Hit http://www.pixentral.com.
    Read the directions. When the image you upload is processed and displayed, scroll down below it and copy ALL of the code in the box next to "HTML". (Ignore the "Forum" code box)
    Paste that copied code into a message here. It will generate and display a thumbnail; clicking on the thumbnail takes you to the full size image you uploaded.

  • Lightroom 2.1 will not display images.

    I use previous versions of Lightroom 1.3, 1.4, 2 Beta and they work fine. Now I upgraded to Lightroom 2.1 and Masters Collection CS4 and Lightroom 2.1 will not display images. All the images I import are just a shade of gray.
    When I adjust the parameters of the image the histogram is changing but the image is blank.
    I have a Vista machine.
    Thank you

    I have a Vista Home Premium, I am on Vista X86 and I just installed LR 1.4 and is working. Also LR2 Beta was working.
    So on the same Vista X86 machine LR 1.4 is working LR 2.1 is not displaying the images.
    This is the sysinfo:
    Lightroom version: 2.1 [512205]
    Operating system: Windows Vista Home Edition Service Pack 1 (Build 6001)
    Version: 6.0 [6001]
    Application architecture: x86
    System architecture: x86
    Physical processor count: 4
    Processor speed: 2.4 GHz
    Built-in memory: 3069.7 MB
    Real memory available to Lightroom: 716.8 MB
    Real memory used by Lightroom: 99.9 MB (13.9%)
    Virtual memory used by Lightroom: 75.2 MB
    Memory cache size: 65.9 MB
    Serial Number: 116040017170941123477699
    Application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 2
    Library Path: C:\Users\Alex\Pictures\Lightroom\Lightroom 2 Catalog.lrcat

  • My mac will not show images when on the internet?

    My mac will not show images when on the internet?  I think I have inadvertently changed some settings but nor sure which one.

    I am going to assume you are using Safari here. If so then go to the Apple menu bar and hit Safari-> Preferences.  Under the Apperance tab there is a check box that is called "Display images when the page opens".  Check if that is unticked.

  • Photoshop will not open in a Creative Cloud trial,

    Photoshop will not open in a Creative Cloud trial, although Indesign & other programs are fine, says I need an internet connection or the clock is set wrong?

    Only tried the Photoshop Elements, and haven’t change computer name or time
    With kind regards,
    Tim Besley
    Message signature was removed by: PECourtejoie

  • Ive recently updated my mac to OS X 10.10 and now my CS5 illustrator and photoshop will not open...  I uploaded the most recent Java and they still won't open.  Please help

    Ive recently updated my mac to OS X 10.10 and now my CS5 illustrator and photoshop will not open...  I uploaded the most recent Java and they still won't open.  Please help

    Mac,
    Nothing shows up here?
    https://www.adobe.com/account/my-products-services.html#
    With CS5 you must have registered, hopefully under your present Adobe ID.
    I am afraid the chat and phone support are off until the beginning of January.
    Serial number and activation support (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
    http://helpx.adobe.com/x-productkb/global/service1.html
    Adobe ID and registration support (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
    http://helpx.adobe.com/x-productkb/global/service-c1.html
    http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

  • Calendar app is not viewable. The window will not resize. Can only see header of the app. Have restarted app and computer.

    This is all I can see. it will not resize the window, full screen mode shows only this as well.

    It really seems like a group policy issue, something like network security, and have you tried to re-map the drives, test the restult again.
    you should post you question in this forum
    http://social.technet.microsoft.com/Forums/en-US/home?forum=winservergen they're good at these kinds of issues.

  • Latest flash version will not display images or video

    Latest flash version will not display images or video in 2 x Windows 7 Pro 64bit machines, 1 x Windows 7 Home Premiums, and 1 x XP SP3 under VMWare Workstation 7. Problem plagues Firefox, Chrome, and IE on all systems. Also running Norton Security from Comcast on all machines. Disabling does not appear to help. Suggestions?

    Not sure, this is the one that I really want to view. I am using the latest 11.6 ending in 168. Curious you got the images. The product ones act like they should be displaying for me but don’t. Can you do a capture of the images? The text with small images sometimes comes through and sometimes not. I wonder if there is a problem on the server end.
    When I talk to the Customer Service people they claim to have no reports of problems, but like the sports pro about to be traded, they may be the last ones to know…

Maybe you are looking for