Photoshop WONT OPEN. PHOTOSHOP CC 2014 PLEASE HELP!!

So, I downloaded and installed creative cloud, and i installed photoshop, but when i click it, absolutely nothing happends, and i have tried many suggestions but nothing happends at all. So please help!

I did resolve my issue by re-installing Portraiture 2.1. The latest version 2.3 would not run for me as I am still using CS3.  I suspect that when you originally ran the trial version, you, too, were running 2.1.  Contact Ani at [email protected] for assistance.  I hope this is helpful.

Similar Messages

  • I can't get Imagenomic Portraiture trial to work in Photoshop cc 2014 please help?

    I have previously used the trial successfully but it expired and I deleted it and then bought the Portraiture package only to be told that I have to install the trial and can then only enter the license key. The trial installs successfully ie I get the green tick for successful installation but it does not show up in my Photoshop Filters? I have contacted Imagenomic who are virtually impossible to contact and then are not interested in your problems once they have your money. Can you believe this level of customer service???  So frustrated.
    What I have tried:
    Quit PS before installation.
    Shutdown before and after installation.
    Checked System requirements for the software see below, it looks ok to me? ( I see below it is OK for PS CC but PS CC2014 is not specifically mentioned, could this be a problem now bearing in mind that I did get it to work on CC 2014 before?)
    Installing via Firefox and via Safari.
    My workware: MAcBook Pro OSX 10.9.4
                           Photoshop CC 2014
                           Imagenomic Portraiture trial current trial download version.
                            The trial I am trying to download is : Portraiture Plugin for Adobe Photoshop CS5/CS6/CC 
                                                                                      and Photoshop Elements 11/12 - Mac OS X 10.7/10.8/10.9 v.2.3.3 build 2330
                                                                                      Mac OS X 10.7.x/10.8.x/10.9.x, 1GB RAM, 100MB HDD, 1280x800 min resolution, Photoshop CS5/CS6/CC or Elements 11/12  ( this is the same one that I did
                                                                                      get to work before)

    I did resolve my issue by re-installing Portraiture 2.1. The latest version 2.3 would not run for me as I am still using CS3.  I suspect that when you originally ran the trial version, you, too, were running 2.1.  Contact Ani at [email protected] for assistance.  I hope this is helpful.

  • Safari wont open on my imac   please help

    i installed the new sarafi and it wont open. it says it is to new for my imac but my imac is only a year old ... please help

    Use the combo updater to update to 10.5.8 and it will work.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate

  • After Effects CS6 wont open splash screen only PLEASE HELP

    when i start up the splash screen comes up for like 3 seconds and closes thats whats been happeninf for over 3 days and im on a busy schedule editing my short movie please help imidiate answers needed i tried reinstalling, updating, changin folders and installing, i cleared the 10.0 and 11.0 folders in the appdata i dont know what else to do i even restarted many times nothing is helping please someone reply at the earlies
    thank you
    harish

    If you need an immediate answer, then you should contact Adobe Technical Support:
    http://www.adobe.com/support/contact

  • Aperture Library wont open on ext. hd - please help!

    I know there are tons of posts on this topic, but I cannot find one that matches my exact issue. Please forgive me if there is already a posted solution to my problem!
    I recently backed up my entire MBP internal hard drive (using time machine) to a seagate 1.5 tb hd (mac osx journaled extended). Since I am so low on disk space on my internal drive, I would like to be able to delete my library on my internal and work off of my external drive. When I try to open the library on my external drive Aperture reads: "Aperture cannot access this library, To use this library, make sure its file permissions are set correctly." I have tried repairing permissions and have followed all of the steps listed on other posts. Any thoughts on how I might be able to correct this problem. Please let me know if I am leaving out any important info to help you all solve this.
    Cory

    It's not clear how you got from "backed up using Time Machine" to having a copy of your Library on an external drive.
    The simplest way to do what you seem to want is to simply copy your Library from its current location (on your system drive) to a newly formatted ("Mac OS Extended (Journaled)") external drive, then double-click the Library on the external drive to launch Aperture with that Library loaded (and make that Library the current Aperture default Library).  Once you confirm that the Library is usable and complete, you could delete the Library on your system drive.
    Note that while running Libraries from external (FW400 and faster) drives works, the generally accepted change to make when you start to run out of space on a system drive containing your Library is to convert your Images' Masters from Managed (that is, pointer and file are inside the Library package) to Referenced (pointer remains in Library, file is relocated as specified by user).  This is less simple that the standard "all Images' Masters are Managed" default, and thus requires a bit of learning and administration, but works well.  I found that most of my development work was done within 45 days of a image being imported into Aperture, and so I've set up my workflow to import files as Images with Managed Masters, and then I manually relocate Masters for Images older than 45 days to an external FW800 drive (but I leave all top-rated Images' Masters in the Library).  This keeps my Library to a usable size (though I did upgrade my MBP drive to 500 GB/7200rpm).
    Good luck.  Post what you do and whether/how you work out the permissions issue (or more questions).

  • Updated ipod wont open applications...please help

    I updated to the latest firmware on my ipod touch a few days ago. Everything works well except there is a problem with the applications funtion.
    After downloading I press the onscreen icon to open the application but it only opens momentarily to its home screen then closes after about 3 seconds. I have tried downloading other applications but the same thing keeps happening....they all close after about 3 secs and I cant get passed the home screen
    Anybody else having the same problems? Any suggestions would be appreciated!

    podman73 wrote:
    Would be great if an apple technician(s) could answer the question...
    This is a user-to-user forum - if you want an answer from an Apple technician, you'll need to call AppleCare.
    Have you updated to the current version of the iPod Touch software (v2.1)? That +"Fixed bugs causing hangs and crashes if you have lots of 3rd party applications."+ The update is free for those who have purchased the 2.0 upgrade.

  • Why is print in grey and PDF not a saving option for only one of my photoshop files?  All other files I open are fine.  Please help!

    I am trying to turn a photoshop document in to a pdf. Print is in grey and under Save As PDF is not an option.   Any other PS document I open allows me both options. What is wrong with this document?! 
    What I have tried and was unsuccessful:
    I changed it to illustrator and saved as PDF but the colors were very dark.
    I have renamed it and opened again.
    I duplicated the layers to another doc.
    Closed PS and opened it again.
    Please help. Thanks!

    Here is what I see...
    It is in RGB color / 32 bits/channel
    Any suggestions?

  • When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks :)

    When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks

    Let's first try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
    iTunes for Windows: How to turn off Compatibility Mode

  • After a licensing failure message, I tried to reinstall CS3 design standard but the error "Component Install Failed" occurred and I still am unable to use Photoshop or InDesign  Please Help!

    after a licensing failure message, I tried to reinstall CS3 design standard but the error "Component Install Failed" occurred and I still am unable to use Photoshop or InDesign  Please Help!

    J3liu1 I would recommend reviewing the installation log files for the specific error message which you are facing.  You can find details on how to locate an interpret your installation log files at Troubleshoot installation with install logs | CS3, CS4.  You are welcome to post any specific errors you discover to this discussion.

  • Please help me, mail wont send!!! Please help me!!!!

    Please help me, mail wont send!!! Please help me!!!!
    I have not changed anything but today cant send mail!
    Any help would be most appreciated.

    Try deleting and recreating the account on the iPad.

  • My new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help

    my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
    my iphone4 is 10 times faster
    i have backed up on itunes and restored but still no luck
    even siri is lagging

    my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
    my iphone4 is 10 times faster
    i have backed up on itunes and restored but still no luck
    even siri is lagging

  • "It is formatted incorrectly, or is not a format that iBooks can open". Can anyone help me with this message of a book that I purchased on iBooks, read, highlighted in the book and now I can't open it anymore. Please help!!!

    "It is formatted incorrectly, or is not a format that iBooks can open". Can anyone help me with this message of a book that I purchased on iBooks, read, highlighted in the book and now I can't open it anymore. Please help!!!

    Mine does the same thing occasionally, is your phone jailbroken? Sometimes it will work if you delete the book and reinstall it or put your phone into airplane mode then turn it back off.

  • My Ipod wont Sync with ITunes! Please Help!

    My Ipod wont Sync with ITunes! Please Help! I have the latest version of Itunes, but my ipod will not sync with my laptop. The diagnostic test has no answers and says everything is normal. When i try to sync, it says "an unknown error occurred (-39)". Any suggestions?

    check for any viruses

  • HT201407 My iphone suddenly stops working and asked for activation required. I did restore it thru itunes but it asks me to turn off "find my iphone". How can i disable "find my iphone" if i can open the iphone itself. please help me.

    My iphone suddenly stops working and asked for activation required. I did restore it thru itunes but it asks me to turn off "find my iphone". How can i disable "find my iphone" if i can open the iphone itself. please help me.

    My iphone 5 suddenly stops working and asked for activation required. I did restore it thru itunes but it asks me to turn off "find my iphone". How can i disable "find my iphone" if i can't open the iphone itself. please help me.

  • I have iphone 4s ios 6.1.2 and when i listen music and move the device iphone get crazy. Music stoped started again, siri open, music forward. Please help!!

    I have iphone 4s ios 6.1.2 and when i listen to music and move or shake it iphone get grazy!!Music stoped started again, siri open, music forward. Please help!!
    It's not jailbroken. I wish i had not leave from ios 5.1.1:((

    Hi JimHdk,
    I have also upgraded to ios6.1.3, and facing same wifi connecting problem, after upgrade my iphone3gs is not connecting to my laptop shared wifi, which was working perfect with ios6.1.2,
    and its not an hardware error, its software error, crippy apple does not test their releases which causes problem to users.
    Updates:
    Earlier wifi connection which i was using on my Iphone 3gs, was WPA2, which was shared from my laptop via "Microsoft virtual WiFi Miniport Adapter", was working perfectly till ios6.1.2, but when i have upgraded my iphone 3gs to ios6.1.3, my iphone 3gs became unable to join wifi,
    Today I have created "adhoc network"  on my laptop using "Broadcom 4313 802.11b/g/n"(default wifi adapter of my laptop), and kept security type "WEP", and found my wifi working fine with my iphone 3gs,
    So if someone using LAN internet on their laptop, they can share their LAN internet to use on their ios devices, via creating an 'adhoc network',
    How to create an 'Adhoc Network',
    choose Security Type : WEP (compatible with ios6.1.3)
    http://www.youneedabudget.com/support/article/create-an-ad-hoc-network-in-window s
    Vinay Rajput

Maybe you are looking for

  • How can I pass a value from the datagrid to my textinput

    Hi i am new in adobe flex! I have only one row in my datagrid and it has 5 dataField. Those dataFields are id, ln, fn, kurs, yr. I want to pass those value into a textinput respectively. Heres my code: <mx:DataGrid x="396" y="10" width="110" height="

  • User to call the name on a linked list from the console

    Hello, My program has 9 linked lists and I need to manipulate them depending on which one the user wants to add or remove from. The problem is it's different every time. I need a way to allow the user to input the name of one of the linked lists, and

  • Exclude Materials with only 1 PO count

    Hello experts, I have a multiprovider with 5 DSOs corresponding to 5 Logical SOurce systems. All DSOs have a similar structure..like ..... Logical Source System, PO number , PO item, Material, quantity, price.......... In a query I wish to compare pr

  • JSP errors under increased load

    Hi, We use JSP/Servlets for our application which is hosted off a iPlanet 4.1 SP 9. Our prolem starts during peak usage, the web server error log is full of the following entries. [08/May/2003:11:45:07] warning (12987): Unable to locate class: dtk.dt

  • MacBook pro late 2011 i7 8GB 750GB MAC OSX Lion freezes on wake up

    Hi, My MacBook pro late 2011 i7 8GB 750GB MAC OSX Lion (up to date) 1 week old freezes on wake up. Plugged on power or not, same issues. No apps running. When it goes to sleep itself i wake it up it freezes for few seconds When i put it to sleep mode