Photoshop wont save

photoshop wont save file as XXX because disk is too full

GScho wrote:
Photoshop elements 7 [...]
Would appreciate any advice!
Try the Elements forum
http://forums.adobe.com/index.jspa?view=discussions

Similar Messages

  • Photoshop wont save actions, I create,

    my hard drive was just replaced and the data and applications were all transferred over, now photoshop wont save new actions or presets I create, it says I dont have permission. Not sure what to do, I dont really want to have to reinstall everything if there is a quick fix.

    okay so thanks to everyone for your help between this information and some other I found online I got it sorted, my library folder wasnt showing up, I have just also recently upgraded to maverick os, so the library folder show up you need to unhide it, this was a great source telling me how to do that http://www.macworld.com/article/2057221/how-to-view-the-library-folder-in-mavericks.html
    then I just went into the user/library/adobe cs5 settings/ and changed the preferences so I was the owner of that folder.

  • Photoshop wont "Save for Web"

    Ever since I installed CC on my vanilla MacMini (Late 2014) running OS X 10.10.1, I haven't been able to use the "Save for Web" feature in Photoshop (2014.2.2 Release, 20141204.r.310 x64) anymore. I keep getting an error message saying "The operation could not be completed. The file or directory could not be found."
    Google and the forums have unfortunately only come up with people having similar problems, but not with any solutions. Any help would be greatly appreciated!

    I seem to have skipped your earlier response.
    I've been on OS X 10.10.2 for a couple of days now. Pretty much since it was released.
    Here's the contents of my ~/Library/Preferences/Adobe Photoshop CC 2014 Settings directory:
    Seems like the file is missing and PS can't write in there for one reason or another. These are the permission settings on the folder:
    Turns out, my initial idea wasn't the worst: I now transferred the entire ~/Library/Preferences/Adobe Photoshop CC 2014 Settings directory from my tmp-admin user to my actual user. Lo and behold – tataaa – sure enough, there was a Save For Web Prefs.psp file in there. And after starting PS, I can now SFW again.
    This issue is worked around, but I am still puzzled and a bit annoyed by the fact, that there doesn't seem to be any real explanation, why on earth that problem happened in the first place and what might still be running differently than it should.
    For reference …
    The contents of the imported settings-directory (permissions: drwxr-xr-x   20 r8r  staff) look as follows:
    The contents of the original directory (permissions: drwxrwxr-x  17 r8r  staff) like this:
    Beats me.
    Anyways – thanks a lot for the assistance, and if you have any further ideas on how to get to the root of the problem, I'd be happy to hear about it!

  • Photoshop wont save files

    Photoshop elements 7 will not save edited files 90% of the times I try, regardless of the file-type I try to save as. Once I get to the savescreen it seems normal, but I cannot get any further and nothing happens, so I have to exit, shutdown and try again.
    Would appreciate any advice!

    GScho wrote:
    Photoshop elements 7 [...]
    Would appreciate any advice!
    Try the Elements forum
    http://forums.adobe.com/index.jspa?view=discussions

  • Image wont save as it looks in photoshop.

    I'm a pretty amateur user of photoshop, but I've been having this problem with an image I'm working on; it wont save as it looks in photoshop.
    Basically, this is what I'm looking at when the psd file is open in Photoshop:
    This is how I would like the image to look when I save it. However, when I save it as a JPEG (or any other format for that matter) it looks like this:
    The saved image is a JPEG file with a resolution of 500x500, the image I'm working with in photoshop has an image size of 7000x7000. Also, the image seems to produce different results when saved at different resolutions. It's very confusing.
    Here is my layers also:
    I am also using a Halftone filter set to subtract on this image, giving the image the lines across the image (shown here as layer 1).
    Anyone have any idea why this is happening and/or what I'm doing wrong?

    There's no reason an image should be downsampled upon saving (from 7000 to 500 pixels), unless you specifically tell it to using the Image Size dialog. The only exception I can think of is if you use Save For Web, which has a number of default settings you should keep an eye on. But a 7000 pixel image has no business on the web anyway (that's w a y too big).
    Resampling will obviously affect an image like this (with the line screen) in a number of ways. You should only work on this at the final intended pixel size.

  • Help!!! Flash CS3 and CS4 wont save .gifs

    Ok, so im trying to save my project as a .gif and it just wont save it right, it marks as if it has already been saved, but when i open the .gif it just displays the first frame.......any help? Am i doing something wrong???? the actual file that im saving is a small animation, with 1 sec of animation, 10 frames, and its appx. 100 x 100 pixels I thought it was the size, but it was not. Any help plz?????
    Note, it does saves it right in .swf  but not on .gif

    Those links, did helped me, but that didnt correct the problems that i was getting.
    Here is the thing, at least this is how it worked for me.
    I was editing the original picture on fireworks, and saw that instead of layers, it was creating bitmap images, saved it as fireworks pdn and imported to flash, and when i finish it didnt save the gif.
    I instead opened the original on photoshop, and it created layers instead bitmap, saved it as a photoshop image, opened it on flash, worked on it, and well, guess what??? it did saved it as a gif!!!!!
    So wierd, but, why won't it save it from the fireworks one into a gif, and the photoshop one worked good? 
    It didnt helped me alot mate, but i still thank you for reading this post bro, thanks, and have a nice day ^_^

  • Is there a way to create a contact box on photoshop and save as PDF?

    Can someone explain how or where to find a tutorial to create a contact box on photoshop then save as a pdf? Thank you!

    Contact box? Your question is not clear perhaps if there was one and only one standard contact box on planet Earth there would probably be more the one correct answer to you question.  Please describe what your desired in the PDF file. If you want something that can be filled in like a contact form you may need to use a different Adobe product like Acrobat. Or something to create an HTML Page with a contact form.

  • I have photoshop C6 on my MAC Pro and want to install it on my new MAC desktop.  I sent the files with AirDrop but photoshop wont open I get an error message that it cant find the Library.  Any thoughts?

    I have photoshop C6 on my MAC Pro and want to install it on my new MAC desktop.  I sent the files with AirDrop but photoshop wont open I get an error message that it cant find the Library.  Any thoughts?

    download the installation files and install using your serial number or adobe id,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Get error message when exiting premier Pro wont save file

    I am getting an error message when I exit adobe premier pro it wont save the file and the program locks up. I even uninstalled an reloaded the program CS5.5 vrs. still get the same error can anyone help?

    You have not provided any system information or other technical details, so we can't know anything. Either way, ask in the Premiere Pro forum.
    Mylenium

  • Aim to process all files in folders on desktop to run through photoshop and save in multiple locations

    Aim to process all files in folders on desktop to run through photoshop and save in multiple locations
    Part one:-
    Gather information from desktop to get brand names and week numbers from the folders
    Excluding folders on desktop beginning with "2" or "Hot"
    Not sure about the list of folders
    but I have got this bit to work with
    set folderPath to "Hal 9000:Users:matthew:Desktop:DIVA_WK30_PSD" --<<this would be gained from the items on the desktop
    set {oldTID, my text item delimiters} to {my text item delimiters, ":"}
    set folderName to last text item of folderPath
    set my text item delimiters to "_WK"
    set FolderEndName to last text item of folderName
    set brandName to first text item of folderName
    set my text item delimiters to "_PSD"
    set weekNumber to first text item of FolderEndName
    set my text item delimiters to oldTID
    After running this I have enough information to create folders in multiple locations, (i need to know where they are so that photoshop can later save them in those multiple locations
    So I need the following folders created
    Locally
    Hal 9000:Users:matthew:Pictures:2011-2012:"WK" + weekNumber
    Hal 9000:Users:matthew:Pictures:2011-2012:"WK" + weekNumber: brandName
    Hal 9000:Users:matthew:Pictures:2011-2012:"WK" + weekNumber: brandName: brandName + "_WK" + weekNumber + "_LR" --(Set path for Later)PathA
    Hal 9000:Users:matthew:Pictures:2011-2012:"WK" + weekNumber: brandName: brandName + "_WK" + weekNumber + "_HR"--(Set path for Later)PathB
    Network
    Volumes:GEN:Brands:Zoom:Brands - Zoom:Upload Photos:2012:"Week" + weekNumber
    Volumes:GEN:Brands:Zoom:Brands - Zoom:Upload Photos:2012:"Week" + weekNumber:brandName + "_WK" + weekNumber + "_LR"  --(Set path for Later)PathC
    Volumes:GEN:Website_Images --(no need to create folder just set path)PathD
    FTP (Still as a normal Volume) So like another Network
    Volumes:impulse:"Week" + weekNumber
    Volumes:impulse:"Week" + weekNumber:Brand
    Volumes:impulse:"Week" + weekNumber:Brand:brandName + "_WK" + weekNumber + "_LR"  --(Set path for Later)PathE
    Volumes:impulse:"Week" + weekNumber:Brand:brandName + "_WK" + weekNumber + "_HR"  --(Set path for Later)PathF
    I like to think that is end of Part 1
    Part 2
    Take the images  (PSD's) from those folders relevant to the Brand then possibly run more applescript that opens flattens and then saves it in the locations above.
    For example….
    An image in folder DIVA_WK30_PSD will then run an applescript in Photoshop, lets call it DivaProcessImages within this we then save to PathA, PathB, PathC, PathD, PathE, PathF the folder path of C should therefore look like this
    Volumes:GEN:Brands:Zoom:Brands - Zoom:Upload Photos:2012:Week30:DIVA_WK30_LR and of course save the image as original filename.
    Then from the next folder
    An image in folder Free_WK30_PSD will then run an applescript in Photoshop, lets call it FreeProcessImages within this we then save to PathA, PathB, PathC, PathD, PathE, PathF the folder path of C should therefore look like this
    Volumes:GEN:Brands:Zoom:Brands - Zoom:Upload Photos:2012:Week30:Free_WK30_LR and of course save the image as original filename.
    The photoshop applescript i'm hoping will be easier as it should be a clearer step by step process without any if's and but's
    Now for the coffee!!

    Hi,
    MattJayC wrote:
    Now to the other part, where each folder was created (and those that already existed) how do I set them as varibles?
    For example,
    set localBrandFolder_High_Res to my getFolderPath(brandName & "_WK" & weekNumber & "_HR", localBrandFolder)
    This line was used to create more than one folder as it ran though the folders on the desktop. The next part is I will need to reference them to save files to them.
    You can use a records
    Examples
    if you want the path of localBrandFolder_High_Res  of "Diva", if "Diva" is the second folder of the Desktop
    You get the path with this : localBrandFolder_High_Res of record 2 of myRecords
    if you want the path of localWeekFolder  in the first folder of the Desktop
    You get the path with this : localWeekFolder of record 1 of myRecords
    Here is the script
    set myRecords to {}
    set dtF to paragraphs of (do shell script "ls -F ~/Desktop | grep '/' | cut -d'/' -f1")
    repeat with i from 1 to number of items in dtF
        set this_item to item i of dtF
        if this_item does not start with "2_" and this_item does not start with "Hot" then
            try
                set folderPath to this_item
                set {oldTID, my text item delimiters} to {my text item delimiters, ":"}
                set folderName to last text item of folderPath
                set my text item delimiters to "_WK"
                set FolderEndName to last text item of folderName
                set brandName to first text item of folderName
                set my text item delimiters to "_PSD"
                set weekNumber to first text item of FolderEndName
                set my text item delimiters to oldTID
            end try
            try
                set this_local_folder to "Hal 9000:Users:matthew:Pictures:2011-2012"
                set var1 to my getFolderPath("WK" & weekNumber, this_local_folder)
                set var2 to my getFolderPath(brandName, var1)
                set var3 to my getFolderPath(brandName & "_WK" & weekNumber & "_LR", var2)
                set var4 to my getFolderPath(brandName & "_WK" & weekNumber & "_HR", var2)
                --set up names to destination folders and create over Netwrok including an already exisiting folder
                set this_Network_folder to "DCKGEN:Brands:Zoom:Brand - Zoom:Upload Photos:2012:"
                set var5 to my getFolderPath("WK" & weekNumber, this_Network_folder)
                set var6 to my getFolderPath(brandName, var5)
                set var7 to my getFolderPath(brandName & "_WK" & weekNumber & "_LR", var6)
                set website_images to "DCKGEN:Website_Images:"
                --set up names to destination folders and create over Netwrok for FTP collection (based on a mounted drive)
                set this_ftp_folder to "Impulse:"
                set var8 to my getFolderPath("Week" & weekNumber, this_ftp_folder)
                set var9 to my getFolderPath(brandName, var8)
                set var10 to my getFolderPath(brandName & "_WK" & weekNumber & "_LR", var9)
                set var11 to my getFolderPath(brandName & "_WK" & weekNumber & "_HR", var9)
                set end of myRecords to ¬
      {localWeekFolder:var1, localBrandFolder:var2, localBrandFolder_Low_Res:var3, localBrandFolder_High_Res:var4, networkWeekFolder:var5, networkBrandFolder:var6, networkBrandFolder_Low_Res:var7, ftpWeekFolder:var8, ftpBrandFolder:var9, ftpBrandFolder_Low_Res:var10, ftpBrandFolder_High_Res:var11}
            end try
        end if
    end repeat
    localBrandFolder_High_Res of record 2 of myRecords -- get full path of localBrandFolder_High_Res in the second folder of Desktop
    on getFolderPath(tName, folderPath)
        tell application "Finder" to tell folder folderPath
            if not (exists folder tName) then
                return (make new folder at it with properties {name:tName}) as string
            else
                return (folder tName) as string
            end if
        end tell
    end getFolderPath

  • Illustrator CS4 wont save files, please help?

    You can edit a file, go to save, close it down, then when you re-open it the changes made have not been saved?? No error message or warning pops up, and it all looks ok like it has saved properly, until you open it up again. This also happens when you use 'save as' command if you use the original file name. If however you type in a different file name - it saves ok. But obviously that is not great as you cant now trust or rely on the save mechanism of the programme, to make sure any changes to artwork have been stored!! I have never seen an issue like this, it is worrying, I hope somebody can help?
    Thanks.
    We are running CS4 on windows7 - yes PC!!!

    We save in EPS, and its not just one file, its a variety of different files and it seems to be random as to which files it does it on, some work fine - some don't. And it can be anything from a minor text change to a colour change, it doesnt seem to matter on the change made, it reacts the same.
    The files are saved over a network connection to a large external hard drive.
    Its really puzzling and now starting to cause problems as we do a fair bit of work in it, and can't trust one of the most important features, and that any changes that have been done have been saved and stored!
    Hope maybe you can help with any thoughts at all.
    Cheers.
    Date: Thu, 24 Jun 2010 03:41:40 -0600
    From: [email protected]
    To: [email protected]
    Subject: Illustrator CS4 wont save files, please help?
    What file format do you save it in?
    What kinds of changes did you make in that file?
    Where do you save the file (removable or network media)?
    >

  • Not able to edit assets in Illustrator/Photoshop and save over existing assets in Edge animation

    Not able to edit assets in Illustrator/Photoshop and save over existing assets in Edge animation to update image changes. Has Adobe changed this capability with new releases? Does this mean to update an asset on the Edge animation timeline, you have to copy and paste all the animations of that old asset over to the new imported asset?

    Hi, CamShazam-
    You should be able to save over existing assets in the images/ folder, then close and reopen the file.  The other option is to save your assets and then use the swap image option in the properties panel.  Is this what you're talking about?  Thanks,
    -Elaine

  • Why Itunes wont save the art works that i add to pdf files?

    I'm not able to add covers to my pdf files in the library, when i try to, the cover that i moved to the artwork box wont save.

    Windows Media Player 12 ought to be able to play most of the same file types that iTunes can. See Getting iTunes & Windows Media Player to play nicely for tips on letting both players share a common set of media files.
    tt2

  • Photoshop CS6 Save For Web UI extra border Bug

    Last week we finally got upgraded to CS6, and I'm dissapointed to see the visual defect I reported in CS5.5 still exists in Photoshop CS6 Save for Web. The details and screenshots are all the same as in my previous thread. http://forums.adobe.com/message/3843054#3843054
    Isn't there a way to fix this?  I rely on PhotoShop to be pixel perfect, not to add extra distracting lines and borders to my work.

    FYI, just to test I just did a crop of an image, then screen grabbed the result.
    To ensure the edge is visible, I changed the workspace background from the dark gray I usually use to a lighter gray...  Here's the pertinent part of the workspace...
    A closeup of the upper-right corner:
    Notably, I don't see any black line around it like you showed.  This leads me to wonder whether I interpreted your screen grab properly...
    -Noel

  • Photoshop CS6 saves the JPGs smaller than they appear in Photoshop...

    Photoshop CS6 saves the jpgs smaller than they appear in Photoshop...
    If I change a file in Photoshop to 72 dpi and scale it down to approximately 1-2 MB,
    it is after saving as a JPG half the size than it was showed in Photoshop (350KB).
    WHY?
    I have the operating system OS X Yosemite 10.10.3 on my Macbook.
    Can someone help me please???
    Eva

    Jpeg is a lossy compression format. 1-2 MB is the uncompressed size.
    What is lossless and lossy compression? - Definition from WhatIs.com
    You can better see the effect in File > Save for Web. You can move the slider from 100% and see the effect on file size.
    Gene

Maybe you are looking for

  • Need to generate html report on deprecated api

    Hi All, How do I write a generic tool that can print a report in html format of all the deprecated methods of a class and their count. Are there any freely downloadble tools that does this. What is the best way to do this if I have to write on my own

  • How do you reset an ipad mini without knowing the password?

    I have just recently changed my password, but know i have forgot the new one. How do you reset the ipad without knowing the password?

  • Lumia 620 Video Recording Issues

    I recorded this video today (link below) with my 620 and it came out horrible. I thought it might have been the shakiness of my filming but I even tried recording a steady pan of my living room afterwards and the video and audio were still choppy. An

  • 9360 not refreshing when lock button pressed.

    When I press the button at the top of my phone to lock it and then press it again to unlock it sometime later the phone time remains at the same time I locked it at for about 3 seconds and I also can't receive bbm messages etc whilst the phone is loc

  • Setting up and ODBC connection

    I need to download the Oracle Client in order to setup an odbc connection to an oracle database. I am not sure what the right product for me to download is. Can someone help me out?