PhotoshopCC works but it's very slow

We have installed Photoshop CC on my PC with Windows 7 and I5 Intel ,8GB RAM, it works but it's very slow, it's impossible to work. On the same machine Photoshop 5 works very good!! There is something that I have to do to increase the performances ?

Moving to Photoshop forum.
Regards,
Romit Sinha

Similar Messages

Ello, I changed my Imac hard drive which no longer worked. I installed a hard drive Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want

Hello, I changed my Imac hard drive which no longer worked. I installed a hard drive
Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want
install OS X 10.4.2 on the hard drive, I do not see the disk. What is the problem?

Thanks for the help
I started on the installation CD OS X 10.4.2, I used Disk Utility
to partition the disk according to the document that you have proposed. unfortunately
I have not succeeded. When I partition the disk, even if I called it Macintosh HD, it
does not keep the name and it shows disk0s3 instead. I did an erase on disk.
When I mount the disk it tells me that I must repair. When I tried to repair, I got
the following message:
Volume check failed
The underflying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error.
I also had a message:
Invalid b-tree node size.
Note: The disc is new, but it has already been formatted on a computer Imac 27 inch 2011 OS X Lion.
I used a USB 2.0 to SATA cable to adjust the formatting.
What to do to fix it?

I have Soundtrack Pro 1.1 It opens OK but the everything takes 4 seconds to work. It's very slow and unusable. Is this a well known problem?

I have Soundtrack Pro 1.1 It opens OK but the everything takes 4 or so seconds to work. It's very slow and unusable in its present state. Is this a well known problem?

STP 3.0.1 was the version designed to work with OSX 10.6.8. Anything earlier than that and issues may arrise. Hard to tell what yours are.
You may want to run Digital Rebellion's Preference Manager to reset the prefs back to the default state. If nothing else, it is a good troubleshooting step.
Good luck.
x

My iPhone works but screen is very,very dim,any ideas?

My iPhone works but screen is very,very dim,any ideas?

I've tried all that stuff nothing happens. I've even fix a new screen on still the same?

My Jetpack 5510L says that its connected to 4G but its performing very slow, I removed the sim card and did a reset of the device. Any other suggestions?

My Jetpack 5510L says that its connected to 4G but its performing very slow, I removed the sim card and did a reset of the device. Any other suggestions?

I don't know who you would contact at Verizon to verify this, but I suspect you are in the same situation as me. My unlimited Jetpack is now being throttled to a basically useless speed of .10Mbps. Sometimes as low as .04Mbps. Turns out this is done purposely as they are evidently eliminating unlimited. They're doing this now even though accounts still display on the my device page as unlimited. They have given no warning, no explanation and started it in the middle of a billing cycle. At least for me. Be prepared to pay about double for 20GB with I think and $8 per gig overage cost. With the 5GB plan it appears they just throttle down to an unusable speed. Currently considering saying goodbye to Verizon myself. Even with some need to change plans and eliminate unlimited this isn't the way to treat customers during the change.

When I add a while loop to the vi "niScope EX Multi-Device Configured Acquisition (TClk)" to acquire data for multiple times, it works but it runs very slowly.

Because I want to acquire the similar data for multiple times and then take an average to increase SNR, I add a while loop to the vi "niScope EX Multi-Device Configured Acquisition (TClk)". It works but it runs very slowly (about 1 sec for each iteration). I think I had put the while loop at a wrong position, which makes the vi run from the very beginning in each iteration. So I really want to know where should I put the while loop to improve the speed? I have attached all the vi and subvi.
Thanks very much.
Attachments:
Multi-Device External Clocking (TClk).vi ‏1166 KB
avgWfm.vi ‏15 KB

Dear Zainykhas,
Thank you for posting this to the discussion forums and for uploading some sample code. I took a lok at the issue you have been having, and it is unclear to me as to why you have placed two for loops around the original while loop. My understanding is that you want to use the original Sample.vi and want to execute this N times where N is the Max Freq divided by Interval so that you can scan for a range of frequencies.
Why not just put Sample.vi around one for loop and use the increment counter scaled by the interval to count up towards Max Freq and insert the desired Frequency into the cluster using Bundle By Name?
Kind Regards,
Robert Ward
Applications Engineer, NI
Attachments:
Modified - RW.vi ‏48 KB

Rendering and working with AE is very slow.

Hey guys,
I'm running on Windows XP Pro, Intel Core 2 Quad CPU, Q6600 @ 2.40Ghz, Clockspeed; 2,40Ghz, 3GB RAM. Whenever I'm working in AE it's very slow to use in full resolution. When I lower the resolution I still have to wait for the preview screen to 'load'. This is very annoying in a work situation. Am I doing something wrong? My pc is very fast with other 'heavy'programs.

AE will auto-disable MP if it does not detect enough RAM. You can still toggle it, but AE won't use it in any case. You could only change that by flipping some switches in your BIOS (if it supports this) that will make your 4 cores appear as only 2 cores or one core even, but this has some other side effects like possibly requiring a full re-install of your entire system...
The disk cache should be located on the fastest disk in your system. Doesn't matter which one, as long as it has enough space and is permanently available. Even a network drive or external disk would work. The only requirement is to create a dedicated directory for it. you can call it "Mom" or "Popsi" - doesn't matter. Calling it "AE Cache" would be smarter, though. ;-)
As for the rest: Don't expect miracles. Processing an x number of pixels can take its time, especially with some effects and in 32bpc mode.
Also be aware that, while AE will handle it, some compressed formats do not lend themselves for working interactively. AE needs to conform them and it will take time to look up the correct time index. This is further complicated if you have lots of clips or rather long clips. You can improve these behaviors sometimes by capturing to different CoDecs or converting the footage.
Part of the problems also may come from the graphics card. Even without OpenGL, AE will use your hardware to decode certain formats if possible and also for accelerated drawing. If your graphics are not up to snuff, have a bad driver or simply are configured poorly, they may have the opposite effect and instead of accelerating your workflow slow it down...
Lastly, make sure your system is in good shape. Work off the fastest disks, clean them regularly of temporary files, defragment them and make sure their RAID/ SATA drivers and configuration are flawless.
Mylenium

IOS 6 upgrade prevented Youtube from working and internet is very slow

Since I upgraded to ios6, the internet is very slow and youtube stopped working. Tried to download youtube app from google in itunes but it has not been working. Used to love my iphone 5 but now very disappointed. At this point I'm considering to return the phone. Tried using youtube in safari but nothing. Any help is appreciated.

If you JUST updated it, may be that Software Update is still downloading pending updates. Since Mountain Lion does that thru the App Store, so you can start that up and check in Update/Purchases/Check for Unfinished Downloads...
Or you can start up the Activity Monitor in Utilities, click on the Network tab and if you see a solid green line pegging the roof, means the kitty is downloading stuff for all it's worth.
Default setting is to automatically check for and download any available updates. Adjustable in System Preferences / Software Update.

ALSA: snd-via82xx - No sound but system gets very slow

Hello!
I'm using the Onboard sound chip on my Fujitsu-Siemens D1607 mainboard. It' A Sigmatel STAC9758/59 Chip and runs with snd_via82xx module (worked with SuSE 9.1 so far, at least stereo-out but no LineIn). Now when i load the module as discribed in the ALSA howto an unmute Master and PCM i still get no sound, but my system gets very slow (applications start ten times slower, loading websites also takes much more time). But snd_via82xx seems to load without errors.
ArchLinux is uptodate and i'm using a custom Kernel 2.6.7 because i need some special settings for my AVM Fritz!Card DSL.
Does anybody have any hint?
CU ActionNews

Hmm ... is tried it at root only . Strange is that even CD doesn't work. No sound. Unfortunally this config works perfectly under WindowsXP so speakers should work so far. Realy strange .... this is was amixer says:
amixer
Simple mixer control 'Master',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [on]
Front Right: Playback 31 [100%] [on]
Simple mixer control 'Master Mono',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [off]
Front Right: Playback 0 [0%] [off]
Simple mixer control 'Headphone +3dB Boost',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Headphone Amp',0
Capabilities:
Mono:
Simple mixer control '3D Control - Switch',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control '3D Control Sigmatel - Depth',0
Capabilities: volume volume-joined
Playback channels: Mono
Limits: 0 - 3
Mono: 0 [0%]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [on]
Front Right: Playback 31 [100%] [on]
Simple mixer control 'PCM Out Path & Mute',0
Capabilities:
Mono:
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [off]
Front Right: Playback 0 [0%] [off]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 31 [100%] [off]
Simple mixer control 'Center/LFE Jack',0
Capabilities:
Mono:
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [off]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [on] Capture [on]
Front Right: Playback 31 [100%] [on] Capture [on]
Simple mixer control 'Line Input Source',0
Capabilities:
Mono:
Simple mixer control 'LineIn Jack',0
Capabilities:
Mono:
Simple mixer control 'CD',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%] [on] Capture [off]
Front Right: Playback 31 [100%] [on] Capture [off]
Simple mixer control 'Mic',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Mono
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [off]
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Mic Boost (+20dB)',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Mic Input Source',0
Capabilities:
Mono:
Simple mixer control 'Mic Select',0
Capabilities:
Mono:
Simple mixer control 'Mic1 Jack',0
Capabilities:
Mono:
Simple mixer control 'Video',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [off] Capture [off]
Front Right: Playback 0 [0%] [off] Capture [off]
Simple mixer control 'Phone',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Mono
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono: Playback 0 [0%] [off]
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Output',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Playback AC97-SPSA',0
Capabilities: volume volume-joined
Playback channels: Mono
Limits: 0 - 3
Mono: 3 [100%]
Simple mixer control 'PC Speaker',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 15
Mono: Playback 0 [0%] [off]
Simple mixer control 'Aux',0
Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [off] Capture [off]
Front Right: Playback 0 [0%] [off] Capture [off]
Simple mixer control 'Mono Output Select',0
Capabilities:
Mono:
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 15 [100%] [on]
Front Right: Capture 15 [100%] [on]
Simple mixer control 'Mix',0
Capabilities: cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Mix Mono',0
Capabilities: cswitch cswitch-joined cswitch-exclusive
Capture exclusive group: 0
Capture channels: Front Left - Front Right
Front Left: Capture [off]
Front Right: Capture [off]
Simple mixer control 'Exchange Center/LFE',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'External Amplifier',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Front Jack',0
Capabilities:
Mono:
Simple mixer control 'Input Source Select',0
Capabilities:
Mono:
Simple mixer control 'Input Source Select',1
Capabilities:
Mono:
Simple mixer control 'Rear Jack',0
Capabilities:
Mono:
Simple mixer control 'Sigmatel 4-Speaker Stereo',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Sigmatel Surround Phase Inversion Playback ',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'VIA DXS',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 30 [97%]
Front Right: Playback 30 [97%]
Simple mixer control 'VIA DXS',1
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%]
Front Right: Playback 31 [100%]
Simple mixer control 'VIA DXS',2
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%]
Front Right: Playback 31 [100%]
Simple mixer control 'VIA DXS',3
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 31 [100%]
Front Right: Playback 31 [100%]
Should be ok, but perhaps you guys find something wrong.
in dmesg and /var/log/messages i do not find anything uncommon. Most of the messages are status messages from pppd .
CU ActionNews

Hi, I dropped my MacBook pro, it was closed and landed on its lower part. At the beginning the screen was black then but I could hear the fan working. I then restarted it and it seemed to work but it bacame extremely slow! Nothing is to work without freez

I dropped my MacBook pro on the floor around 1 meter height, it landed on its bottom part, the lid was closed but it was on. When I opened it the screen was black and I could hear the fan sound. I restarted it and it took around 8 minutes to start!! Every thing became very slow and freezing all the time, I'm trying to back it up but it's freezing every time! The two fingers tap is not working also :(
Does this mean that the hard drive is damaged or just needs to be fixed in its place properly?
Please help.
Thank you

Something broke. Accidental damage is not covered under Apple's warranty.
It could be just a couple of connecter knocked loose, or the logic board could be cracked.
Take it to Genius Bar to find out, and pray for loose connectors.
Good luck.

My macbook works normally connected to the charger, but it is very slow when using the battery. What can I do?

I have a Macbook Pro 13'' 2011 OS X 10.9.4, and recently it started giving this problem, which the macbook works well while connected to the charger, but when i use it only with the batery it gets really slow. But in the report system of the macbook says that the battery is operating normally. It has alreary 822 cycles.

Perform a SMC reset:
http://support.apple.com/kb/HT3964
If there is no meaningful change, open System Information>Power and post the following from your MBP:
(Make certain that the charger is connected)
Ciao.

Work Book Execution is very slow

Hi
Hi have created some workbooks in BI Production server.
Means i have opened a query in analyser and saved it as a work book in BI Production.
But the work Book execution time is really slow and taking areound 15min to show the results.
As in case of same report in analyser the reports are fine are executing in time.
Can any body tell me waht is the problem

Hi,
I have a similar problem when attach a lot of queries in the same workbook, in this case i create a new workbook and add a table zone to attach the query, not opening the query and save like workbook.
Regards,
Dani

Sound & brightness not working properly & features often very slow

I have a new imac.
Just trying to hit the "about this Mac" took 4 tries before it displayed, anyway its a OS X version 10.9.1 / 3.4GHz i5 8GB.
So the main issue is when I try increasing /decreasing volume or brightness with bluetooth keyboard it seems to have a lag or delay, and often does not adjust at all. At first I thought this was the only issue but now it seems the lag is effecting many areas.
even trying to open "force quit" results in the beach ball appearing and takes about a minute before the force quit actually appears.
I have 2 other macs and I have never had this issue before.
Now the sound is not on at all lol, any help appreciated!

Hey Movitar,
I understand that you're experiencing several issues across your iMac. I would start off your troubleshooting with these steps:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosingSleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
If your Mac appears to be running normally but isn't responding, force the computer to shut down by pressing and holding the power button for 10 seconds. Note: You will lose any unsaved work in any open applications.For Mac portables experiencing issues related to the MagSafe power adapter and/or battery, try:
Unplug the MagSafe power adapter from the Mac and the wall power socket for several seconds.
Shutdown the Mac. Physically remove and re-insert the battery (if it's removable) and startup the Mac.
If the issue is still not resolved after following the troubleshooting items above, an SMC reset may be necessary.After performing normal troubleshooting, these symptoms may indicate that an SMC reset may be necessary:
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Note: For Intel-based Xserve computers that are not responding, you can shut down locally, or by using remote commands, or by pressing and holding the power button for five seconds.
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Have a great day,
Delgadoh

Air play mirroring mac with mountain lion, sound is working but video is extremely slow to update

I am trying to get air play mirroring working on my mid 2011 Mac book pro and Apple TV 3 (latest one) with mountain lion. I have the icon, it seems to connect to each other, and the screen shows up on my apple TV, yet it doesnt update, takes a long time to show up at all, just keeps showing the same screen. However, the audio works fine, I tried to play a Xfinity stream through safari, the video didnt show up on apple TV but the sound came through with no delay. Any ideas?

thanks for the help.... even thought it didn't work...
basically I think i either have some virus or this is the result of that stupid update I did... I know i did that keyboard one an itunes one a quicktime one and there might've been another.

Download OK but Upload speed very slow

Slow Upload Problem
Caused by Windows 8 One Drive Program being active. Eats up all upload capability.
Cntrl, Alt, Delete: Process Tab, scroll to One Drive, right click, end task
To check problem: Performance Tab, scroll to bottom, Ethernet, S:0 = fixed, S:400 = problem
To disable One Drive:
http://www.eightforums.com/tutorials/29426-onedrive-integration-windows-8-1-enable-disable.html

Hi Julio,
We have removed the class-map for IPS and have done a clear local-host.
We have also changed the duplex (from Auto to full) and speed (from Auto to 100Mbps) on the outside interface.
it seemed the duplex we 've got was half when it was configured as Auto. We've asked our ISP to change in their side to full, but we've got half instead.
We did an upload test after those actions, the speed we got is 300KBps, it should be 8Mbps (download and upload).
when we send many upload at a same time, we can see from our monitoring tool that the bandwidth used is 8Mb.
We wonder we cannot get high speed when uploading a single file, the max speed is 300KBps.
Please, find below the output of
sh int | inc error
        0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
        0 output errors, 0 collisions, 1 interface resets
        0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
        0 output errors, 0 collisions, 1 interface resets
        0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
        0 output errors, 0 collisions, 1 interface resets
        0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
        0 output errors, 2710 collisions, 3 interface resets
        0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
        0 output errors, 0 collisions, 0 interface resets
the 2710 collisions is on the outside interface (i think it was before changing duplex)
sh cpu
CPU utilization for 5 seconds = 2%; 1 minute: 1%; 5 minutes: 1%
when we plug a computer directly to the ISP device (IDU), the speed is high (about 650KBps).
what would you suggest us to do? (sure, we will rate all the helpful posts )

PhotoshopCC works but it's very slow

Similar Messages

Maybe you are looking for