PhotoshopCS6 My history won't update my actions until i until i tap the space bar.

I recently started using CS6 on my mac and I use a wacom intous. Everytime i make a brush stroke the history won't update, so I can't undo or switch tools unless I hold space bar and move. Anyone else having this issues?

Hey ead, I had the same problem too, couldn't add songs to my Itouch.
So I suspected the fact that I smashed up my Ipod pretty good might've done something to the syncing mechanism or something... but either way a quick fix I used was:
1. Go into "Devices" tab in Itunes
2. Click the checkbox "Sync with this Ipod over Wifi
Definitely a temporary fix but w/e it worked for me.

Similar Messages

After updating my iPhone 6 to 8.1.1 the suggestion bar across the top of the keyboard is no longer there. How do I get it back?

After updating my iPhone 6 to 8.1.1 the suggestion bar across the top of the keyboard is no longer there. How do I get it back? I had it before the update and loved using it.
Thanks

Check to see that Settings > General > Keyboard > Predictive is turned ON.

Just updated from iOS 6 to 8, I find the tool bar in the iBooks too wide as it blocks the running title of my books. Anyone experienced this? Any solution?

Just updated from iOS 6 to 8, I find the tool bar in the iBooks too wide as it blocks the running title of my books. Anyone experienced this? Any solution?

In the last few days, it seems that my computer has all of a sudden caught a virus.
As others have pointed out, this isn't malware. That should not be your first (or even fifty-first) thought when your Mac starts misbehaving. For more on this topic, see my Mac Malware Guide.
I know the last ditch effort (after cleaning and maintenance of disc verification and permissions and repairs, is to reboot from the system disc.
You mention "cleaning and maintenance." Have you been running utilities claiming to do those things? If so, you may be the victim of an overly-zealous cleaning job, which has removed important files and damaged your system.
If I'm understanding correctly, you're unable to open any applications at all... is that right? Do you have any backups? If you don't have backups, you're in a sticky situation, as it will be difficult to make backups in your current state, but you shouldn't try any kind of repairs without them. (Actually, you shouldn't do anything with your computer without backups, but this is especially important when something is going badly wrong.)
If you have backups, reboot from your Snow Leopard install disc. From there, first, repair the hard drive with Disk Utility. Once that is done, assuming repairs were successful, reinstall the system. You can simply reinstall it on top of your current system, and it will replace any damaged or lost system files with new copies. (You'll also need to update the system via Software Update after reinstalling.)
If you don't have backups, or if Disk Utility can't repair damage, or if the problem continues even after a reinstall, post back with those details.

Apple TV update is not uploading on my TV. The grey bar remains grey and after an hour, nothing has happened.

Apple TV update is not uploading on my TV. The grey bar remains grey and after an hour, nothing has happened. How can I get the update if nothing is uploading. Turned TV and all systems off and on again a few times. Looked on line for help.
Mac is running Mountain Lion OSX 10.8.5. If I update to another Operating system my printer will not work!
My TV is a Samsung 610/630.
Any suggestions will be appreciated.

Unplug, wait 10 seconds, reconnect. If on wifi try ethernet.
Try a restore through iTunes if it persists
Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support

My brushes won't work with actions in Photoshop such as Save the Dress, Ying-Yang, or Foundation

When I try to use my brushes with actions in Photoshop, such as Save the Dress, Ying-Yang, or Foundation, they won't work. I've tried resetting the brushes, changing the opacity, restarting the program, and unlocking the layers. It was working perfectly, but suddenly just stopped. When I click on the image, it doesn't do anything. There is also a small black box next to the action the I am using in the history box. When my brushes were working, that box would show in white where I used the brushes on my pictures, but now it doesn't register anything that I try to do.

christyh61213853 wrote:
Have u gotten an answer from anyone on ur situation with the brushes? I am unable to use my brushes as well and I can't figure it out also...
You would do better starting a new thread, rather than bump a thread from 2012. Some of those posters might not have used this forum for years, and a lot has changed regards both Photoshop and operating systems since 2012
You need to give specific information about _your_ problem.
What version of Photoshop?
What operating system?
Which brushes, and if not standard, where did you get them from, or did you make them?
What is happening, and what have you tried so far to fix it?

Firefox 3.63 won't update to 3.64 paused downloading connecting to the update server

Firefox 3.63 won't UPDATE to 3.64
When help menu->resume downloading firefox 3.6.4
dialog shows paused downloading, connecting to the update server,
clicked resume (faulty?) button, no response
even after waiting so long, even tired safe mode, but still paused
== This happened ==
Every time Firefox opened
== one month ago

Go to Tools --> Options --> Advanced --> Network --> Settings and choose "Do not use Proxy" to see if that helps.

TS3694 My iPad won't update software saying it can 't connect to the Internet which is not true as you can see from me being able to write this. there is no error code. It just says unable to verify, try again later. Any suggestions?

My iPad won't update iOS 7.0.4 software saying it is unable to verify because it can 't connect to the Internet and to try again later. It doesn't display an error message number. Obviously I can connect otherwise you wouldn't be reading this. Any suggestions? Many thanks for your help.

You didn't specify which way you are trying to update - using the Software Update setting on the iPad or by using iTunes. I will assume that you are using iTunes because the kb article that linkd you to here was the one about iTunes error codes.
Quit iTunes, reset your iPad, restart your computer and try again. Disable your firewall and antivirus software of you are using it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Have TC green light. It won't update firmware and I'm not coneected to the internet. I can, however, connect with ethernet direct to Imac

I have a grren light on TC but the firmware update fails because I'm not connected to the net. I have the ethernet cable from my Charter cable modem connected to TC and trying to connect automatically but it's not working. Can anyone help?

Have you performed a full modem reset on your device and network power cycle?
If not, please try the following:
Push the reset button on the modem and then power it off
Pull the battery if its easily accessible
Power down everything else on your network
Wait at least 15 minutes, 30 would be better, 60 even better.
Power up the modem first and let it run by itself for a few moments
Start the next device connected to the modem, probably your Time Capsule, the same way
Start each device the same way until all network devices are back up
If your modem is functioning corrrectly, and you have the TC configured correctly, you will be connected to the Internet.

After updating to FireFox 16.0.1 in Windows, the address bar stopped working, as well as the search bar, though not immediately. Reinstall didn't fix it.

Initially I downloaded an AOL-optimized version, but when the problems came up I reinstalled the regular version and it was fine. Two days ago it randomly started again. Address bar won't go anywhere with enter or pressing the arrow button, and the search bar has no search engine. Trying add a search engine by clicking "manage search engines" doesn't help; the "add search enginges" button is unresponsive and there are none in the list to choose from. I uninstalled everything including my customizations and personal settings and reinstalled, which still didn't help. I tried disabling all the plugins and that didn't work either. I even tried searching from the FireFox home page search, since at that point it was the only page I could get to, and even that wouldn't search. The most recent add-on I downloaded was the Evernote Web Clipper I think, but it didn't seem to coincide with the start of the problems.
Update: I ran a malware program (MalWareBytes) and it came up with nothing. I also got back into FireFox to get the Troubleshooting Information and added it in. In addition, here's my complete plugin/extension list:
Plugins:
Foxit Reader Plugin for Mozilla 2.2.1.530
Google Earth Plugin 6.2.0.5788
Google Update 1.3.21.123
Java Deployment Toolkit 7.0.90.5 10.9.2.5
Java (TM) Platform SE 7 U9 10.9.2.5
Microsoft Office 2010 14.0.4761.1000
Microsoft Office 2010 14.0.4730.1010
Microsoft Windows Media Services 4.1.0.3917
Shockwave Flash 11.4.402.287
Silverlight Plugin 4.1.10329.0
Windows Live Photo Gallery 14.0.8081.709
Extensions:
avast! WebRep 7.0.1473

Sorry you are having problems. First of all try Fifrefox's safemode.
*[[Troubleshoot Firefox issues using Safe Mode]]
If that works post back for further advice.
Next step, if safe mode did not work.
First: Try a clean install, (you have had a none standard version installed previously) that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
See
* this recent post [/questions/940399#answer-377134]
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Second: try a New Profile
*http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
* this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
**[[Back up and restore information in Firefox profiles]]
* Until you are absolutely confident about the repercussions I suggest
** always use an empty folder when creating a new profile
** never delete or rename profiles, just disable or remove shortcuts
** after creating a new test profile open it and check for any addons or plugins that may be have been included by default

Can Firefox v4 be updated to allow opening recently closed tabs from the tab bar??

Opening recently closed tabs by right-clicking (the mouse) over the tab bar was available in Firefox up through the last released update to v3.6. I found it useful and easy to use. I understand that I can use 3 left-mouse clicks to open a recently closed tab from the history (click on upper-left Firefox button, navigate to/click on History, and then navigate to/click on Recently Closed Tabs), or press CTRL+SHIFT+T. Up until version 3.6, I could just simply right-click the tab bar to re-open a closed tab. Can right-clicking the tab bar be re-instituted in Firefox v4?

That tab context menu only shows if you right click a tab on the Tab bar. 
If you right click empty space then the toolbar context menu opens.

When I try to update apps on my iPad mini, I tap the "Update" button, but the app just opens and doesn't update.

I have an iPad mini, 16G, WiFi only. My operating system is iOS 7.0.3. My problem is that my App Store has stopped updating apps. And it's not like the update starts, but never finishes. It doesn't start at all. I touch the "Update" button, and the app opens instead of updating. I have 9 updates now, and none of them work. And the rest of the App Store is working fine. I have no problems searching for apps or downloading new apps. It's just the updates that don't work. I had thought that maybe I needed to update my software and then it would start working, but I can't. The available software update requires 5.9G of storage, and I only have 1.6G. I also thought that maybe there was not enough forage to update the apps, but if that was the case, then it would tell me that there is not enough storage instead of opening the app. Does anyone know how to fix this? I really need to update my apps!

Hey there nstephanie0625,
It sounds like you are unable to update your apps in the App store because they launch, rather than update. I would recommend starting by signing out of your Apple ID in Settings:
iTunes: Using the iTunes Store for iPhone, iPad, and iPod touch
Settings > iTunes & App Stores > Create New Apple ID on your device.
Then quit all the running apps on your phone:
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
Thank you for using Apple Support Communities.
Regards,
Sterling

Firefox update 23.0.1, no longer automatically highlights the address bar content when I open a new tab.

The above. When I opened a new tab in the past, before the new update, firefox would automatically highlight the text in the address bar, and I could simply start typing from there the address of the site I wanted. I could quickly get to anywhere I wanted in less than a second. Now, I have to drag and click into the address bar every time. I installed an add-on called "custom newtab" but it just slows me down further due to a lag between the opening of a new tab, and the add-on kicking in and highlighting the address bar content.
What happens is this:
Click "new tab"
New tab opens blank and the text appears highlighted "google.co.uk" for about a quarter second.
Page loads Google and the highlighted text becomes unhighlighted for another quarter second.
Add-on kicks in and highlights the text "google.co.uk" meanwhile I've already begun typing and end up losing the first part of the words, sending me to random web pages and searches.
Why did this change?! Fix it please!

YES!! Thank you jscher2000! You sir are a legend. Thanks for this, changed the newtaburl in about:config, totally worked. Nope, never saw it happening! Speedy machine this one :P Yep, that change completely sorted the issue, just opened about 741 new tabs through the shortcut on my mouse just to celebrate. Thanks guys who helped, no thanks those who didn't.

Before I updated to ios5 there was a "number" on the task bar next to bookmarks showing all the windows I like to keep open. Now I can't find the setting to go back to that feature. Help!! I just want to be able to click on the number to get to my windows

Before I updated to ios5 there was a number lit up on the task bar (next to bookmarks) which were all the windows I like to keep open. Now, after updating I can't find that feature in settings. I don't like all the different tabs along the top. Can anyone help me please?? I just want to click on the number and have all of my open windows there!

I don't think that is an option. iOS 5 new features is tabbed browsing, it replaced the old window interface.

Trying to update from 10.4.11 to snow leopard, the genius bar said I should be able to do this I only need 1 GB of RAM and I have 2 GB. I put in the SL disc and my Macbook pro spits it out. What do I do without needlessly spending more money to upgrade?

So this disc won't load. I recently bought a new ipod nano, but am unable to put songs on it without the latest version of itunes.
My Macbook Pro is 2008 and has 10.4.11 the guys at the genius bar said to upgrade to snow leopard to upgrade to lion and I shouldn't have a problem. I was told I need 1GB of RAM and I have 2GBs of RAM but the disc spits out every time after about 3 minutes.
This is my computer info, please please please help me install this disc so I can use this ipod I bought from you that I've been super psyched about using.
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro3,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.4 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache (per processor):          4 MB
Memory:          2 GB
Bus Speed:          800 MHz
Boot ROM Version:          MBP31.0070.B07
SMC Version:          1.16f11
Serial Number:          W8******X92
Sudden Motion Sensor:
State:          Enabled
I don't want to be frustrated with apple anymore, please help me so I can be happy with apple again.

MAshmen wrote:
disc so I can use this ipod I bought from you that I've been super psyched about using.
I don't want to be frustrated with apple anymore, please help me so I can be happy with apple again.
You didn't buy anything from us.
These forums are user-to-user; no Apple staff are involved other than to moderate.
Meanwhile, I refer to you to X423424X's post.

I am trying to update to OS X 10.5.8, but the progress bar has stalled for hours.

I've tried restarting the update but it just goes back to the progress that it achieved before and then stalls again indefinitely. How can I completely restart the update and this time get it to complete it without stalling?

Just to add to BD's good advice:
Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).
Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
http://support.apple.com/kb/TS1541?viewlocale=en_US

PhotoshopCS6 My history won't update my actions until i until i tap the space bar.

Similar Messages

Maybe you are looking for