Photoshopimport.aip will not run on Yosemite

after updating to yosemite and then RE-INSTALLING cs-4 from the original discs, entering my key and installing all updates, i can no longer open .psd files inside illustrator. i receive an error for the plugin photoshopimport.aip when i startup AI. anyone find a fix for this?

thanks for the reply, i was looking for an answer to "anyone find a fix for this?" . didn't really need your commentary on how i decide what to do with my computers and software. but if you must know, the answer is i like cs4, already own it and was checking to see if there was a fix for this before i purchase a newer version of something that is doing everything i need it to do except for the above mentioned problem.

Similar Messages

  • Upgraded my mac to yosemite and my toshiba backup will not run

    I upgraded my Macbook Pro (June 2012 model) to Yosemite and now my Toshiba /backup will not run.  I can see it when I attach it and am able to open the file.  The last backup was in November 2014. Is there a fix or do I have to purchase another backup drive?

    Custom will show automatically as soon as you just edit some options. So just go ahead, you don't need to select "custom"

  • 12-month old iMac running Mavericks will not run Yosemite

    I have an iMac 21.5", bought new in September 2013 and currently running Mavericks with no problem. The OS is on the internal Mac HDD while Time Machine is on an external HDD. Previous OS updates have installed OK.
    Yosemite however will not run. After installation I can log in with no problem and all seems well -- the first time.  All attempts to log in after the first produce the Apple logo and progress bar, but the bar advances only about one third of the way and hangs up, even when left for an hour or more. Nothing at all can move it -- all I can do is reboot by powering off/on. No login appears, just -- the logo and progress bar, which starts to run then stops as before.
    If I reinstall Yosemite then I get one login as before, followed by the same failure -- I have now re-installed three times.
    I have tried rolling back to earlier (pre-Mavericks) OS versions on Time Machine before installing Yosemite -- same result.
    Right now I am back on the previous Mavericks.  All is OK and I can live without Yosemite, but I am becoming concerned for future-proofing my apps. Newer versions, for Yosemite, are not going to run.
    Any help would be appreciated please.
    Best wishes to all.

    Sadly it did not last. Yesterday it again froze on login and this time Safe Boot got me nowhere.
    No doubt if I carry on experimenting I can sort it out,  but I can longer justify the long breaks from my work. I have rolled back via Time Machine to my last Mavericks-based save, and there it stays until someone at Apple gets to grips with Yosemite. Or replaces it, which I expect won't be long . . .
    It just is not good enough to tell the consumer that  they must accept bugs with a new release, or that it's all their own, or their system's fault  or that they should get help from a support forum -- any clerk should be able to sit down and just use it. If a machine was running OK with an existing OS,  then it should seamlessly switch to the new without calling for a Masters in IT to figure it out. No ifs or buts. We pay  a premium price for a Mac and deserve better than this from Apple.
    From my standpoint, Yosemite is without doubt the worst beast of an OS -- from any source -- that it has ever been my misfortune to encounter. This is my third Mac over the years, and at this rate it's my last -- for all Microsoft's failings, I have never encountered anything like this with Windows.

  • Lightroom CC will not run on my MAC OX Yosemite 10.10.3

    Using the CC I download Lightroom cc and found the trial version will not run. I had a Lightroom 5 with 24 days left on the trial which I deleted - help

    if you see something about your trial expiring, there's nothing easy you can do.
    otherwise, CC applications close immediately after launch

  • Google earth will not run since downloading yosemite

    google earth will not run since downloading yosemite

    Do a backup.
    Quit the application.
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.  Select Library. Then go to Preferences/com.apple.Safari.plist. Move the .plist to your desktop.
    Restart, open the application and test. If it works okay, delete the plist from the desktop.
    If the application is the same, return the .plist to where you got it from, overwriting the newer one.
    Thanks to leonie for some information contained in this.

  • System preferences will not open after Yosemite 10.10.2 upgrade

    system preferences will not open after Yosemite 10.10.2 upgrade.  What should I do?

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Also see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

    Sorry for being unclear.
    When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list).  I will already be logged in with the Apple ID I use for everything (my dev account).  I will be able to update all of the other various applications needing updating except for my Final Cut Pro.  When I click the update button next to the FCP update, it will give me an error saying  "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
    I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite.  FCP was working fine until the upgrade.  Is there anything that can be done to fix this?

  • Fcp will not start with yosemite, what should I do

    FCP 10 will not load with yosemite, what should I do

    WWhat version is this? Only 10.1.3 or later will run with Yosemite.

  • Scan to network folder will not work for Yosemite

    Scan to network folder, which is supposed to allow the unit to scan and save to a shared directory on a remote computer, does not work in Yosemite,  though it will work on Macs sporting earlier OS on same network. 
    HP personnel have indicated that HP does not support Apple Mavericks. One can only assume then that it will not work on Yosemite either
    Yet these units are still being sold to be used with Apple OSX.
    Please resolve HP's position.  If these units will not function properly under Mavericks and Yosemite, please explicitly say so.  The scan to network feature should not have anything to do with any OS issue, and it is much more likely that the issue is faulty HP firmware.
    If these units are supposed to fully function under Mavericks and Yosemite,  please provide substantive resolution of the many many problems users have experienced.
    The Scan to Network feature is what makes using these units viable as scanners. The fact that this works poorly at best, and not at all on any recent Apple OS, is simple acceptable

    IT IS OFFICIAL
    HP Case Manager has indicated that HP is abandoning Scan to Network Folder starting with Yosemite as OS security constraints present issues with using its current transport.
    Of course this took an hour of double talk and fiddling about before the admission was forthcoming...
    Shall we count the days until that information actually shows up in the forums?

  • I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I did it again. Now it will not run and I get an error message saying that firefox is running and you can only run one at a time. I can't figure out what is running.

    Because of a problem, I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I uninstalled/reinstalled it again. Now it will not run. I get an error message saying that firefox is running and you can only run one at a time. I have uninstalled multiple times and can't figure out what is running. The is only one Firefox installed and it is not open. What does this mean and how do I fix it?

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    *http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    See also:
    *[[/questions/880050]]

  • Downloaded safari 6.0.4 but it will not run on 10.6.8 on

    I downloaded safair 6.0.4 to a macbook running 10.6.8 but Safari will not run the new verstion, only the 5.9.1??

    For 10.6.8 you need Safari 5.1.10.
    Ideally, you'd now install a system backup made before you got 6.0.4 on there... if that's not possible, download Safari 5.1.10 for Snow Leopard & use Pacifist to 'force' the install, then restart. Backup first, if you haven't already.

  • Firefox will not run after System restore or running in compatibility mode for windows 98. How do I fix this? I already tried all other solutions on this site.

    I was running Firefox fine just yesterday. I screwed up the registry a litle while removing an installed program completely, so I restored the system and everything appeared to work fine. I then decided to play an old video game, Return to Krondor, which was made back in 1998, so I ran the program with no other programs running in compatibility for windows 98. After finishing the game, I closed it and put the computer in hibernation mode. I come back today and firefox will not run at all. It is not running in the background and there are no programs running. There are no services running which could interfere with it. I think somehow Firefox may think I'm in compatibility mode still, but I have no idea.
    I'm running windows Vista 32 - bit with an AMD 2.4ghz processor, 4gb ram on an Emachine computer. I have already tried system restore, restart, processes etc. Nothing works. I can still run Internet explorer and all other programs.

    The person that I was assisting, has Windows 7 which has 64 bit system. Her browser was IE 10.
    Was IE11 ever offered (or installed) via Windows Update?
    Is her computer currently fully-patched at Windows Update?
    Is Adobe Shockwave Player v12.1 (or higher) installed on her computer?
    Is Adobe Flash Player v15.0.0.189 (or higher) installed on her computer?
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Troubleshoot Shockwave Player installation for Windows
    http://kb2.adobe.com/cps/403/kb403264.html
    You will find support for Shockwave Player in this forum:
    http://forums.adobe.com/community/webplayers/webplayers_shockwave
    ~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft

  • Office 2013 applications will not run as a domain users

    I have a windows 7 64-bit pc with 2013 office home and and business installed. When trying to access Office as a domain user the programs will not run. Is there a fix for this other than making the users local admins?

    Hi,
    Which version of Office 2013 did you deployed, Windows Installer-based version or the Click-to-Run version?
    Did you install the Office product with local administrator account? I notice that the users must be local administrators on their computers to install Office:
    http://technet.microsoft.com/en-us/library/ee624360.aspx
    If we add the local admin right to the user, can the Office programs be launched? If so, repair the Office programs and then remove the local admin right. See if it can work.
    Best regards,
    Rex Zhang
    TechNet Community Support

  • I recently purchased the iPhone 5 and my itunes account on my iMac 7,1 will not recognize it as a device. My imac has stopped downloading new updates, it says it is up to date with iTunes 9.2.1. My imac will not run the newest 10.7 itunes either. HELP!!

    I recently purchased the iPhone 5 and my itunes account on my iMac 7,1 will not recognize it as a device. My imac has stopped downloading new updates, it says it is up to date with iTunes 9.2.1. My imac will not run the newest 10.7 itunes either. All I want to do is put my music from itunes on my computer to my new phone. HELP please!!

    i called apple and they are sending me snow leopard so i should, *fingers crossed, be able to run the newer version of itunes. we'll find out for sure in a few days when it arrives

  • ITunes 10 will not run on Windows 7, 64 bit

    I have upgraded to itunes 10 and now it will not run. In task manager the process is running but no programme. i uninstalled all itunes, quick step, bonjour and apple folders. Then tried a clean instal of itunes 10. Still didn't work. Uninstalled again and reloaded v 9.2 and it works. Tried disabling bonjour and ran the instal of 10 again and it still doesn't work. This is becoming a major pain as I am stuck on v9.2.

    Try installing the version 10 again so we can check on a few other characteristics of the problem, seeoh.
    (1) Does your QuickTime Player launch, or do you get an error message of some kind when you try to launch that?
    (2) Try (by way of experiment) disabling the BonJour Service.
    In your Start Menu, right-click Computer and select "Manage".
    Expand "Services & Applications".
    Open "Services". (Maximise the window to better see what's going on.)
    Right-click the BonJour Service and select "Properties". In the "General" tab, set Start-up type to "Disabled".
    Restart the PC, and try launching iTunes again. Does it launch this time?

Maybe you are looking for