Photosmart 109a not printing from MacBook Pro

My Photosmart TouchSmart 109a is not printing from my MacBook Pro. It is merely producing blank sheets. I have noticed that the normal on-screen box which indicates that the laptop is communicating with the printer appears and then disappears almost immediately. I have re-installed the driver and installed a set of new ink cartridges, to no avail.I do not know how to print a test page but photocopying is also producing blank pages which would seem to me points to a prinetr problem.If I connect an alternate printer, everything work fine.

What version of OS X is it using?
What brand and model is the router?
Do you receive any error messages at all during any of the steps?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

Wireless Printer not printing from MacBook Pro

I bought a new MacBook Pro, which came with a HP Deskjet 3050 wireless printer. The printer works ok on my home wireles network. I can print from all my PCs, but not the Apple stuff. My MacBook shows the printer on the System Preferences, but shows it not connected. My IPad does not even show the printer. How can I get it to work? P.S. Apple is reputed to be easy, but it took less than one minute on Windows 7.

You may need to install the latest printer drivers from HP:
http://support.apple.com/kb/DL907
Then set up your printer: System Preferences>Print & Scan.

Xerox 8560DN pauses when printing from MacBook Pro (Maverick update)

Xerox 8560DN pauses when printing from MacBook Pro using the printer connected to a Windows XP machine. The printer is fully shared, however when I print, it goes to PAUSE. It displays...Ready to print > Printing > and it pauses.
The Maverick update has changed lots of unecessary setups. What was perfectly working before, not it causes problems.
Any solution?

Carolyn Samit,
I did it several times without any success. I think that the Maverick update damaged something.
I also deleted, added and change all settings... Not working. Xerox does not have a Maverick driver available, but today apple released a Xerox printer software update (Version 2.3). After the installation, nothing changed.

Printing from Macbook Pro to HP Photosmart Plus B210a

Hi,
I am experiencing difficulty in printing documents from Macbook Pro to HP Photosmart Plus B210a. This has only been a problem for the last 2 weeks.
I think this may be due the most recent update of OS X Mavericks 10.9.3.
I have tried to update printer drivers from HP web, and it indicates that the printer in connected to my network router, and I have been able to run a testprint to the printer.
However when I try to print any documents the print queue seems to be trying to print, but never actually generates an output document.
I am looking for any advice/guidance on how to solve this printing problem.

Hi Eric,
i note that 10.9.4 is Mavericks.I cannot link directly as it is a wireless printer.
I have tried using the Terminal app, and typed the command as you indicated and i got the response attached.
IAIN-HERCUSs-MacBook-Pro:~ iain1$ ping 192.168.1.69
PING 192.168.1.69 (192.168.1.69): 56 data bytes
64 bytes from 192.168.1.69: icmp_seq=0 ttl=255 time=6.941 ms
64 bytes from 192.168.1.69: icmp_seq=1 ttl=255 time=5.657 ms
64 bytes from 192.168.1.69: icmp_seq=2 ttl=255 time=3.769 ms
64 bytes from 192.168.1.69: icmp_seq=3 ttl=255 time=4.136 ms
64 bytes from 192.168.1.69: icmp_seq=4 ttl=255 time=4.226 ms
64 bytes from 192.168.1.69: icmp_seq=5 ttl=255 time=4.219 ms
64 bytes from 192.168.1.69: icmp_seq=6 ttl=255 time=4.699 ms
64 bytes from 192.168.1.69: icmp_seq=7 ttl=255 time=6.325 ms
64 bytes from 192.168.1.69: icmp_seq=8 ttl=255 time=4.570 ms
64 bytes from 192.168.1.69: icmp_seq=9 ttl=255 time=4.493 ms
I found that had to break this process. i don't know what this tells you with regard to the status of the printer connection.
Please let me know what I should do next?
IDH1

How to print from Macbook Pro on a Cannon MP610 printer?

I have recently bought a Macbook Pro, and I have a wireless network set up at home.
I have no problems connecting to the internet or the network. But I can't seem to access the printer. I have a Cannon MP610 Printer. This printer is connected to the PC, which is connected to the modem. The printer is unable to connect directly into the modem which is unfortunate
It's a fairly big network. We have a master pc that is connected to the modem. This master computer also has a usb printer. We have a secondary pc ethernet linked to the master pc, which can connect to the internet and the printer via the ethernet.
The modem is a Thomson TG782T ADSL.
We have 3 windows O/S laptops, and 2 MAC O/S laptops.. No laptop can access the printer. Only the internet.
Can you access a printer from a laptop through the modem through the master computer the the printer?
The printer is turned on, and the PC is always running. The printer and file sharing is turned on.
What would be the least expensive way I could go about fixing this problem?
I have heard about people downloading Gutenprint; so i downloaded it, but couldn't get it to run.
I have tried many different ways, and after adding a new printer and finding it on the network.. is then says it is in the queue list.. but won't print. It just sits there until you cancel it.
Thanks in advance
Jason

Jason Paige wrote:
How can I use the Gutenprint driver on my Mac? All it does is downloads and installs, but it wont allow me to use it. (Like it doesn't come up under applications or anything).
Installing printers on Mac's is usually a two step process. The first is to install the driver software if it is not on the Mac already and the second is to add the printer queue. OS X 10.6 comes with Gutenprint v5.2.3 already so would be no need to download and install again, unless you customized the OS X installation and selected not to install the printer drivers or you have a model of printer that only a later version of Gutenprint supports. Since your MP610 is listed as a supported model with v5.2.3 then the downloading was probably a waste of your time.
To add the printer when it is shared by Windows you open Print & Fax, select to add ( + ) and then select the Windows icon. This will open a pane showing three columns. The first column is for workgroup names and since you mention you're using XP Home then your workgroup name will be 'mshome'. If your Mac does not see 'mshome' in the first column then we need to look at the IP addresses being used by your computers.
IP address:121.222.186.51
According to "what is my ip address.com" it says my MacBook Pro and master desktop PC has both the same IP addresses. Is this meant to be correct?
Looking at the IP address listed this is going to be the address of the Thomson router. If all computers were using the same address then this would be a problem but given that you used a web service to tell you the address then this won't be the case.
To see what IP address, subnet mask and gateway address you are have configured, you can use Command Prompt on XP and type "ipconfig /all" (without the quotation marks) and press Enter. This will give you a list of all the network settings in the PC. Write these down for later reference.
For the Mac you can open System Preferences > Network and select which port you are using (Ethernet or Airport). Then in the right pane will be the current IP address. To get more information you can press the Advanced button and then select the TCP/IP tab in the next pane.
How do I create a PMB queue? And how do I find out if I can ping the master PC? (what's your definition of ping?)
It's an SMB queue and I suggest that we leave that process for now. Besides you will need to know the IP address of the XP sharing the printer before we can try that process. So let's just try to get the computers appearing in the Windows Add Printer browser and using the Gutenprint driver instead of the Canon.

Printing from MacBook Pro to Appletalk printer

Computer: MacBook Pro OS X 10.4.8
network: wireless via Apple Airport
printer: NEC SilentWriter 1097 connected to Ethernet via a Appletalk-to-Ethernet adaptor
Here is the situation:
When I run the Printer Setup Utility, select "Add Printer," then press the "More Printers..." button, then select "AppleTalk" and "Local AppleTalk Zone," no printers show up in the list. Appletalk is enabled in the network settings and I can see the other Macs on the network. The other Macs (both PPC, one wired one wireless; both also running 10.4.8) on the network can see the Appletalk printer. The MacBook Pro (Intel) cannot.
MacBook Pro Mac OS X (10.4.8)
iMac G5 Mac OS X (10.4.8)

How is your Airport connected to the Ethernet-to-Localtalk adapter? Is it a direct connection from the LAN Ethernet port on the Airport or through a hub/switch/router? On my network both the Airport and the iPrint Ethernet-to-Localtalk adapter are connected to an Ethernet switch (as are 2-3 computers). I have had no problems printing to my HP 5MP via AppleTalk wirelessly from 2 other Macs. (Except that this is slow with complex documents due to the slow Localtalk connection.)
Are you sure the Ethernet port on the Airport is enabled? How did you set up the Airport? Can you use other services such as iTunes sharing over the wireless connection?
I am using the same laser printer driver whether I connect wirelessly or wired. Since the 802.11g should function as if it is a wired connection, I don't see why there should be a difference in drivers, as long as you use an ethernet workable driver as you are apparently doing. (I am not a printer guru, just a learner, so I could be wrong here, but the Appletalk over wireless 802.11g does work for me. I don't have an Intel Mac but I do want to get one soon so I hope there is not a problem in this regard.)

Wireless Printing from MacBook Pro and Windows 7 laptop through iMac

I have looked everywhere I can think and have not found a solution to this problem:
I just bought a 21.5" iMac and a Windows 7 laptop. I already had a 15" Macbook Pro.
I have an HP C5280 printer that is now connected via USB to the iMac. All computers use my wireless home network using a Netgear N wireless router.
I cannot figure out how to print wirelessly from either the MacBook or laptop through the iMac. Printer software is installed on all computers and printer sharing is enabled on the iMac.

Welcome to the Apple Discussions!
In the Finder go to Help>Mac Help. Select the Index, upper right. Go to S>Sharing printers. You will find instructions for configuring Macs and PCs for printer sharing among the articles available.
Dah•veed

Wireless printing from MacBook Pro to MacBook through Linksys?

I have a MacBook connected to an Epson printer. Our Internet connection is through a Linksys WRT54G router.
My son just got a MacBook Pro. Both machines are running Leopard.
Can he print wirelessly from the MB Pro through my MacBook connected to the printer? I've got print sharing turned on in both machines, but I can't find any other documentation that tells me how to do this. I've searched and can't find my set up listed there - I see lots of Window to Mac, print servers, Airport Extreme questions. It's so simple, however, that I must have missed it - so forgive me if this has been answered before.
Patrick

Patricksgolden:
I have this same setup with a G5 connected to a home network and a linksys wireless router that I connect a new MacBook Pro and my daughter connects a dell laptop. I have two printers connected to the G5 which runs Tiger. I turned on print sharing as indicated by apple documentation. This did not work. I reviewed all the postings on printing using leopard and found the following posting very helpful.
OS X 10.5 client and NON-OS X CUPS server: adding printers, solved.
What I did was update the local CUPS configuration file by going to http://localhost:631/ and editing the configuration file based on the above posting. Then I rebooted by Mac. The printers then appeared in the systems preferences default option. However they still did not work.
Finally I added them manually using the IP option and the LPD selection with the G5 IP address. Make sure you put in the print queue name. The only other change I needed to make was to use the Generic Postscript driver instead of the Epson driver(RX500). It then started to print. Using the Epson driver sent it to the printer however it completed without printing.
I hope this helps. I know it is not the step by step instructions, however if you look at the above thread there is more detail.

Printing from macbook pro to desktop GI5.

I have got my new macbook pro and was wondering if I was able to get it to print from the USB printer thats plugged into my iMac GI5 wirelessly through the wifi. Both are running snow leopard if that makes a difference, just don't want to have to go upstairs every time, lazy i know but also don't want to have to be swapping the USB's around all the time either.
any suggestions are welcome.
Thanks in advance.

That's an easy one. On your iMac go to System Preferences/Printing and enable *Printer Sharing*. On your MBP go to the same Sys Pref and add a printer using the + icon. You will see your shared printer in the upcoming list. Add it and your’re ready to go. Your iMac needs to be on and not sleeping in order to print.
Björn

Printing from macbook pro and iPad using same printer

Have a macbook pro and an ipad. Can print from either using my epson XP-310 but not from both without resetting settings for whichever device I wasn't printing from . Is there a way to set up my Epson 310 wifi so it can see both devices and let either ipad or macbook pro print vs having to switch settings back an forth?

Welcome to the Apple Discussions!
In the Finder go to Help>Mac Help. Select the Index, upper right. Go to S>Sharing printers. You will find instructions for configuring Macs and PCs for printer sharing among the articles available.
Dah•veed

Printing from MacBook Pro to a Printer Connected to the USB Port on A MacG5

November 17, 2009
Apple Tells Me: It is completely valid to connect the HP 4360 printer (not wireless) to the USB Port of my MacG5 and print pages from my MacBook Pro if I select Print Share in the Apple Preferences of my MacG5. The MacBook Pro and MacG5 are connected through a Router and a wired Local Area Network through a Router.
HP Tells Me: Since the D4360 is not a wireless printer and since it is not supported to print from a MacBook Pro on the same wired local area network also connected to a MacG5 computer. In particular, they said that use of the Print Share option on the MacG5 to print from the MacBook Pro will cause damage to the HP D4360 printer or print driver and when this occurs it will invalidate the warranty on the HPD4360.
Questions:
1. Is there any validity to the HP answer on this subject??
My analysis to date says that the Apple statement is 100% true, with the exception that if the driver is damaged it can be restored without any damage to the printer.
2. Is there any documentation of the HP concern?

Is there any validity to the HP answer on this subject?
No. It's very difficult for any software to damage a hardware component, and on the rare case the driver becomes damaged, which is also highly unlikely, it won't affect the printer's warranty.
(48665)

Printing from Macbook Pro OSX (version 10.8.5) to Dell 1355cn printer

Hi, I'm trying to print from my Macbook Pro OSX (version 10.8.5) to my Dell 1355cn printer but it is not working. I have downloaded/ installed the appropriate driver software from the Dell website but when I go to print, the Mac says that it is completeing the task, but nothing happens with the printer. The printer does work and all cables are fine.

Fax Information
Fax Programs
Fax Programs (2)

Problems printing from MacBook Pro, bug?

For the past week I haven't been able to print from my computer. First I get an error message in the actual printer dialog box... says that there's a 'filter error' and that I need to update the printer software. Tried that, and search for latest OSX update but I've got that too (running 10.9.1). My printer is an HP P1102, thought maybe it's on its last legs or something, but test sheets come out fine. Then I also noticed something strange, which seems like a bug: I can no longer save documents as pdfs properly, 1-2 page documents come up as a blank pages, longer documents are missing the first few pages and also some pages at the end, but the rest of the document is normal. These documents are being saved as pset files (I save it as x.pdf and it becomes x.pdf.pset). As the two issues came up at the same time and are linked to the print dialogue box, they're problably related? Is this a bug, or some setting I need to change on the computer?

Hi Eric,
i note that 10.9.4 is Mavericks.I cannot link directly as it is a wireless printer.
I have tried using the Terminal app, and typed the command as you indicated and i got the response attached.
IAIN-HERCUSs-MacBook-Pro:~ iain1$ ping 192.168.1.69
PING 192.168.1.69 (192.168.1.69): 56 data bytes
64 bytes from 192.168.1.69: icmp_seq=0 ttl=255 time=6.941 ms
64 bytes from 192.168.1.69: icmp_seq=1 ttl=255 time=5.657 ms
64 bytes from 192.168.1.69: icmp_seq=2 ttl=255 time=3.769 ms
64 bytes from 192.168.1.69: icmp_seq=3 ttl=255 time=4.136 ms
64 bytes from 192.168.1.69: icmp_seq=4 ttl=255 time=4.226 ms
64 bytes from 192.168.1.69: icmp_seq=5 ttl=255 time=4.219 ms
64 bytes from 192.168.1.69: icmp_seq=6 ttl=255 time=4.699 ms
64 bytes from 192.168.1.69: icmp_seq=7 ttl=255 time=6.325 ms
64 bytes from 192.168.1.69: icmp_seq=8 ttl=255 time=4.570 ms
64 bytes from 192.168.1.69: icmp_seq=9 ttl=255 time=4.493 ms
I found that had to break this process. i don't know what this tells you with regard to the status of the printer connection.
Please let me know what I should do next?
IDH1

CANNOT PRINT FROM MACBOOK PRO TO CANON PRO 9000

Hi, this is my first post here. i expect this has been asked before, but here goes. Yesterday i tried to connect my MACbook pro to my CANON pro 9000.I have tried everything i can think of
without success.
I have downloaded print drives from CANON,still does not print.
i have uninstalled the printer and added it again,still does not print.In console log i just keep getting filter error, coming up.
I am completely at a loss now, i am also new to MAC'S i have only had it for two months, so still learning.
therefor, i don't know if i am doing something wrong,or if there is a fault somewhere.The printer itself works fine with a PC.
Any help with this would be much appreciated,
thank you.

Welcome to the Discussions!
Maybe this document will help:
_http://docs.info.apple.com/article.html?artnum=307156_
Joe

Printing from MacBook Pro 17" Mid 2010 running 10.8.2 ... persistent inability for Apple MacBook Pro to print to a variety of HP printers (have run Windows and Ubuntu on Parallels and same printers work) ... what is going on with Apple printer support?

What is wrong with Apple's support of printers ... inability for MacBook Pros to connect with HP and other printers. Yet the same printers
work under Mac OS based Parallels (running Windows or Ubuntu) - WHY? Finger pointing (HP . Apple ... Apple > HP) ... who cares ... FIX IT ... this has gone on for months now. WHAT IS THE PROBLEM?

HP discontinued support (read: stopped updating their OS X printer drivers) for a lot of their printers back when Apple released Snow Leopard and dropped even more when Lion was released. This is an HP problem, not an Apple problem.
Exacty what printers are you having problems with?
If any of your printers are on the HPIJS list, try installing the HPIJS drivers (there are 3 files to install, and it won't hurt anything). This solved the issue for me on Snow Leopard, Lion and Mt. Lion with my older HP printers.

Photosmart 109a not printing from MacBook Pro

Similar Messages

Maybe you are looking for