Photosmart 475 cuts top of picture off when printing

I have a Photosmart 475 and have not used it very much until now.  Whenever I choose a picture(s) to print, on the screen they look fine but when they print the top of the picture is cut off. This has resulted with many heads cut off in the photos. I have it set to borderless printing and am using HP Premium photo paper size 4 x 6; one picture per sheet. I am not zooming in on the picture either.  Also, I load the paper as shown in the diagram in the book. Does anybody have any suggestions as to why?  Thank you.

I have seen this happen with Avery labels. Are your Margins off when you print from other programs?
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

  • Text getting cut off when printing to PDF from Excel

    Hello,
         I've seen a lot related to this subject but nothing that shows a real solution.
         Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
         It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
         Any assistance is appreciated.
    Thanks,
    Kevin Murphy

    please delete me from your mailing list.  tks.
    Date: Wed, 10 Feb 2010 11:20:28 -0700
    From: [email protected]
    To: [email protected]
    Subject: Text getting cut off when printing to PDF from Excel
    Hello,
         I've seen a lot related to this subject but nothing that shows a real solution.
         Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
         It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
         Any assistance is appreciated.
    Thanks,
    Kevin Murphy
    >

  • Photosmart 6520 makes noise like slipping gears when printing

    Photosmart 6520 makes noise like slipping gears when printing. Printer is just one month old? Have Windows 8.1 OS.

    Hi @Zed0027,
    Welcome to the HP Forums!
    I noticed that your HP Photosmart 6520 is making noises like the gears are slipping during printing, and I am happy to help!
    For further assistance, I will need to know:
    If the printer is located on a flat surface.
    If there are any error messages displayed on the printer's display screen. Such as: Paper Jam, Carriage Jam etc.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
    If you can see any broken parts in the printer when you open it.
    If the ink carriage is moving freely.
    In the meantime, please try a hard reset, please see this post, How to perform a Hard Reset by @Rich1.
    Hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • How do I remove top and bottom margins when printing using Adobe Acrobat XI Standard.

    How do I remove top and bottom margins when printing using Adobe Acrobat XI Standard. (I selected 'Fit to scale' and there's a huge gap on the top and bottom).

    Those margins are usually reported from the printer settings to Acrobat. Meansif you have, for example, an inkjet printer and that printer can not print seamlessly, then there will be a minimum margin.
    Check your printer's page settings.

  • Photo getting cut off when printing

    I am trying to print a 6x4 photo with my HP Photosmart B8550.  Everytime I go to print it, it cuts off part of the picture.  I created the picture in Photoshop at 6x4 and saved it as a jpg.  In the preview it shows up fine but it is NOT right when it prints.  Please advise.

    StephF wrote:
    I am trying to print a 6x4 photo with my HP Photosmart B8550.  Everytime I go to print it, it cuts off part of the picture.  I created the picture in Photoshop at 6x4 and saved it as a jpg.  In the preview it shows up fine but it is NOT right when it prints.  Please advise.
    The edges of your image will be cut off by a printer that can’t print all the way to the edges of the paper. In order to prevent this, go to the Image Size menu again and decrease the height by 1 inch (thus also reducing the width). When printed, the image will be centered on the paper. You can also choose “Scale to Fit Media” In Page Setup.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Notes cut off when printing, issue with margins

    When I print a slide with notes, the notes complete cover the width of the page, flush left and right. My printer cuts the margins automatically (not a bleed), so those portions of the text in the notes gets cut off.
    Any way to control the margins, left and right, when printing notes from Keynote?

    Keynote print layout is a bit of a mess, and is well commented on by users, it prints differently than previous versions, eg  in handouts the slide image is much smaller than previously, in grid, the slides are off the printable area on the left.
    We are hoping this is fixed in the round of scheduled updates.

  • Left side of reports are being cut off when printed.

    The leftmost character is being cut off some reports when printed. I have added the following to the registry on the report server but it still is cutting off the the left side of some reports.
    REPORTS_ADD_HWMARGIN = YES
    I am also getting a blank page after each printed page.
    Edited by: user1065650 on Jun 22, 2010 11:35 AM

    Any change the OS changed?
    For example we were running 6 and everything was Windows.
    On 10 the Report Server in on Linux and we had to play with the Fonts some to make it work.
    We change the uifont.ali file
    Its a long shot but in that file under these sections here what I have it it helps (Please make a copy first)
    In the file /u01/app/oracle/product/midtier/guicommon/tk/admin/uifont.ali there are several issues.
    First under “Mapping from MS Windows”
    # Mapping from MS Windows
    #Arial = helvetica
    #"Courier New" = courier
    #"Times New Roman" = times
    #Modern = helvetica
    #"MS Sans Serif" = helvetica
    #"MS Serif" = times
    #"Small Fonts" = helvetica
    Arial = "arial.ttf"
    #Arial = helvetica
    "Courier New" = courier
    "Times New Roman" = times
    Modern = helvetica
    "MS Sans Serif" = helvetica
    "MS Serif" = times
    "Small Fonts" = Helvetica
    The lines in bold have been added.
    Next under “Support for Far Eastern Languages”
    # PDF section can be additionally used to enable Multibyte language support
    # built into Reports. To use this feature with Adobe (r) Acrobat (c), you
    # need to install the Asian font pack available online at the Adobe web site.
    # .....SJIS = "HeiseiKakuGo-W5-Acro"
    # A Japanese report run with Shift-JIS character set is replaced to
    # HeiseiKakuGo-W5-Acro CID font.
    #itcadvantgardegothic = arial
    #"ITC Avant Garde Gothic" = arial
    #itcadvantgardegothic = Arial
    #"ITC Avant Garde Gothic" = Arial
    itcadvantgardegothic = Helvetica
    "ITC Avant Garde Gothic" = Helvetica
    # Required
    #itcadvantgardegothic = Arial
    #"ITC Avant Garde Gothic" = Arial
    The lines in bold have been added
    Finally under “PDF:Subset” everything is commented out.

  • Top margin too big when printing to shared printer

    We have a Canon Pixma iP6600D printer that is connected to an iMac on our home network and shared for printing with other macs in the house.
    Suddenly, since a few days ago, any prints made from these other machines are printing with too large a top margin (i.e. the print starts too low on the page by about an inch), and so the bottom margin is consequently too narrow (and sometimes the ink even overflows past the bottom of the page).
    When I attach the printer directly via USB to one of these machines then the printouts look just fine.
    All the machines have OSX 10.7.2 installed.

    This worked for me too, though I was in a rush and didn't really read what I was doing.  This tip removes all printers configured on your Mac, not just the one that is selected.  If you also connect to networked printers (not those with configured with Bonjour) or any other advanced printer, you'll want to write down any IP addresses or settings before proceeding.  My guess is that simply removing and then adding the Bonjour printer again would also do the trick.

  • Top of image cut off when printed

    I used Aperture to print a borderless 4x6 on borderless paper. In the print preview, the entire image was there (a close-up of Detroit Tiger Verlander with his hat on). Then I printed and the top 10-20% of his hat was cut off.
    But then I ordered an online print through Aperture of the same photo just as I set up to print from my printer. The print was sent to me without being clipped at the top.
    Anyone know why this clipping happens when I print the picture? I quadruple checked all the settings.

    You may want to check on the printer driver and paper size selected

  • HP Laserjet P1102w - Right side margin cut off when printing in Internet Explorer 9! URGENT PROBLEM*

    Hi,
    I have just purchased a new printer (HP Laserjet P1102W), and when I print a web page in Internet Explorer 9, the footer (I set to the URL) does not print at all and the header will print though the right hand edge of my entire web page is cut off (including my top right header - Pages ? of ?).
    I always use Print Preview first, and in the print preview it looks perfect. I always tick the box to enable shrink to fit too. Why will it look perfect in 'Print Preview' but yet when it prints, it cuts off the right hand side edge of the page and doesnt print the footer?? I have tried adjusting margins, etc... all to no avail.
    I would like to check whether others have this same problem?
    I spoke to HP (UK Printer Support) and they said it is Internet Explorer 9's problem. I have left a message on the Microsodt Web forum which you can see here. http://answers.microsoft.com/en-us/ie/forum/ie9-windows_vista/internet-exploer-9-not-printing-header...
    I am hoping they may release a patch / hotfix - but this has to be affecting many other users of this printer too? The more of us that complain, the quicker it will get sorted.
    Any others with the same problem?
    Thanks.

    I spoke with Microsoft technical support via phone today. Between us - we seemed to have found the problem.
    It's to do with the DPI (the font size) settings in Windows!?
    I have mine set to 188% on my Windows Vista mahcine and 200% on my Windows 7 laptop.
    From my Printing tests in Internet Explorer 9...
    at 100 % DPI – it prints perfectly
    at 150% DPI – it prints perfectly
    at 200% DPI – the right side of the margin is cut off, and no footer is printed – despite it looking perfect in the Print Preview.
    I am using http://uk.msn.com/ as my test print outs.
    This indicates when the DPI is changed above 150%, IE9 doesn't print properly – though other browsers like Safari or Firefox do print correctly. This surely has to indicate a bug in either the Windows operating system or Internet Explorer 9?
    Microsoft are going to run their own tests and phone me back tomorrow...hopefully with a solution!
    Hope this helps any others with the same problem at the moment!
    Would be great if HP could provide a soloution asap - surely a tweak to the Printer dirvers will fix the problem?

  • How do I get my watermark not to get cut off when printing from aperture?

    When I export an image that I have put my watermark on and print it the water mark gets cut off in the printing

    Aperture should scale watermarks down to fit the exported image.  Perhaps it is scaling to one dimension and not both?
    Have you tried resizing your watermark?  I suggest creating a watermark for each commonly used export size.  I use a wide and not tall watermark, in these widths (in pixels):
    - 320
    - 640
    - 1024

  • Tables in dropdowns cut off when printing

    In a RoboHelp (X5) HTML project, one of our topics has some
    fairly long tables in dropdowns.
    When we print these topics (either from the preview or from
    the compiled CHM), any table in a dropdown that crosses a page
    break is invisible until the point at which it spills over to the
    second page. The rows on the next page print normally.
    Has anyone else encountered this? Or better yet, found a
    solution other than not using tables in dropdowns?

    Thanks for responding, Peter. I actually solved this particular problem by converting the type to outlines, and it printed just fine after that.
    In this case, it was an okay fix, because it was just a small area of display text but I'm worried that I'll have the same problem again later in larger documents and body text. So I'll keep that suggestion in mind if I run into the problem again!
    (BTW, I do suspect that the problem stems from a driver issue. I'm printing on a basic, off-the-shelf HP home printer which doesn't have a driver I can select in my Print dialogue.)

  • Brochure template right-side edge gets cut off when printed

    its horizontal set-up, 8.5x11.0. but on both my printers (both HPs) the right edge gets cut off. how can I manipulate the doc to a smaller size without making the formating go cattywampus?
    comments are hidden (that helped a little)

    With my DeskJet there is an option to "scale down" a document to fit the page. Do yours offer that?
    Also, I apologize if this idea is too hokey, depending upon the nature and extent of your printing project, but would it be acceptable to set up your printer for legal-size paper and then trim the hardcopies?
    MacBook Pro   Mac OS X (10.4.9)  

  • Header cut off when printing

    Whenever I print a document, the header is cut off. How do I fix this?

    One thing you might want to do is to update software i.e. - 10.6.8 is the latest version of that software and now there are more current updates for the OS.
    Did you drag it to the print module as I remember all you need to do is click on print (upper right)
    Make sure you are using the right paper and setting all the way thourout the chain.

  • Image cut off when printing from snipping tool

    I am using the snipping tool that is part of Microsoft Windows 7. Thank you for your help.

    Hey , Welcome to the HP forums! I understand that you are experiencing issues with cut off images on your Windows 7 PC before printing to your Envy 7640. I can help you with that, however I am not quite sure what program you are using that has your snipping tool. If you let me know what program you are using I can make sure we get you pointed in the right direction to resolve this.

Maybe you are looking for

  • Monitor image burn in

    I opened a word document for about an hour and now my monitor has a slight burned in image of my desktop icons and a faint image of the window that was open for editing. I have Windows8 and the monitor is a Pavilion 23xi LED. The system is about a ye

  • How do I update IPad to ios5?

    How do I update my IPad to ios5?

  • My page goes beyond the fold, but no scrollbar? :S

    Hi, I have made a website in Flex, located at http://www.theplaygrounds.co.uk/The_Playground.swf Now this site is just a simple portfolio, but I have a lot planned for it. What I was wondering is that when you go to the contact page, you cannot see a

  • Sales order KE type

    Hi, I have two lines of the same product ready to be delivered. They are confirmed and when I try and create a delivery only the first line item shows up. The order is of KE type and both lines are associated to two different production orders. Why c

  • PHYSICAL INVENTORY DOC IN A SINGLE SHOT  = MI40

    CAN I KNOW SIR HOW TO PROCEED WITH THE TRANSACTION CODE MI40 (PHYSICAL INVENTORY DOCUMENT) THAT IS FROM THE CREATION OF EXCEL SHEET AND WHAT ARE FIELDS REQUIRED AS MANDATORY TO BE GIVEN IN THE EXCEL SHEET AND THE PROCESS OF UPLOADING THE EXCEL SHEET