Photosmart 4780 Wireless connection without USB cable on mac!!!
Dear all,
My mac pro does recognize the printer via USB connection anymore. I tried to turn on the wireless connection on the 4780 but could not find 'hpsetup' in wireless networks.....
Is there any other way to connect this thing wirelessly or do i need to buy a new printer ??
regard
Ruben
Hey everyone.. I have the ultimate solution for this:
1- On your small printer screen, go to wireless settings, press on WSP - press "push button"
2- Go to your wireless router panel - by using the IP address of the router (mine is 198.122.3.3), go to "Wireless" and press the WSP Button (two rounded arrows)
another option:
1- On your small printer screen, go to wireless settings, press on WSP - press "Pin"
2- Go to your wireless router panel, go to "Wireless" and pput the PIN number that you see on the small screen.
For further readings, please go to this link: http://www.hp.com/global/us/en/wireless/printer-setup-help.html
Similar Messages
-
Is it possible to connect HP DESKJET 1510 All-in-One series Wireless printer without USB cable?
my mom recently bought me the HP DESKJET 1510 All-in-One series so i have an at home printer for school work. but when we bought it we did not know there was a certain USB that had to connect to the printer. so we bought the wrong one. now i have a project due and i cannot print. we have a small USB that fits it but its hard to connect it to the computer and printer because its so small. so if we can have it sent to the printer without the USB that would be perfect!
Hi,
No, in many cases printers won't come with USB cables. You need a cable which is similar to the following one:
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Apple TV 2 updating without USB cable?
Hi, after failing to update to iOS 5 s/w on my ATV it tells me to connect to itunes from recovery mode.
I have no micro usb cable to do this with.
- Can i update without connecting a USB cable?
- Where can i get one online (UK)?
Because of where i work i am unable to get to a Genius Bar, and having searched the Apple website it appears they have taken off email support, daft idea, living in Germany i have to phone the UK support number at a ridiculous price, to be told im getting charged for telephone support. Is this another way of Apple taking our hard earned cash by monopolising the market or is there a better way? (Like going over to Android?)
If Apple products that can only be recovered via USB then why arent those products shipped with the cables?
( ...oh wait yeah its so they can charge us for thier failed s/w...)
Thanks.http://store.apple.com/us/product/H3046VC/A?mco=MTY3ODQ5OTY
$19.95 from apple store. -
When I try to connect a USB cable a message appears on the screen
When I try to connect a USB cable a message appears on the screen saying that one or more USB devices are consuming to much energy and due to this the USB port were deactivated.
What should I do to solve this problem?
Do not forget is only a merely USB cable from a texas calculator, I have experienced to with an USB extension, and the same problem appears, I have tried to connect directly a USB memory stick and the IMAC do not recognise is presence, or appears thesame mesage as with the cable.Updated information:
I have perfomed as rkaufmann87 instruct me but without any success.
Then I made some more tests:
I have tried to connect three diferent types (Ipad usb cable; TI-Nspire CX CAS usb cable and an ordinary extension usb cable) of usb connectors cables and all of them with the same behaviour.
Viewing the IMAC from backside and looking to the usb ports from the left to the rigth the behaviour of the USB ports are diferent.
the two first more to the left when we try to connect a USB cable, a message appears on the screen, sayng that USB devices are consuming to much energy and due to this the USB port were deactivated (This is more or less the translation from Portuguese language).
The ones more to the rigth nothing happens, simply are dead, no message and no charge the IPAD, no connect the USB stick.
I really need yuor support, this IMAC is from November 2012. -
TS3274 How can I connect tv to ipad? Want it to use netflex but will not connect using USB cable.
How can I connect tv to ipad? Want it to use netflex but will not connect using USB cable.
http://store.apple.com/us/browse/home/shop_ipad/ipad_accessories/cables_docks
You should find a solution here -
HP laserjet 6L connected thru USB cable printing problem
System Board ASUS M3A78-EM does not have LPT port on mother board.
Printer Model : HP Laserjet 6L Gold (Old printer) Connected thru USB cable (LPT to USB/USB to LPT)
O/S Windows XP
Driver installed automatically and port selected USB
Previously it was working fine but now a days, I am not able to print clear text on output.. It prints some words in italic, some of half italic, crucked letters. If I start my PC with printer switch off. When ever required printer, I switched ON printer and give command to print. It displays many time "printer failed to print this document". After reboot the system with switched on printer message does not displayed.
Can any one help to reolve this problem of uneven printing letters.
my email id is {Personal Information Removed}I found this advice on another site:
"You will need to install drivers for your usb serial adapter, A good way to find which drivers to install (if u dont have them) is to click the apple Icon on the top left, 'about this mac'then click the 'More Info' on the window which appears, then look for USB devices.
Your serial adapter should appear as a usb device, THen google for the os x usb drivers for the chipset/adapter, or contact your vendor/look on sourceforge for it."
I don't know if that's the problem, but you should have gotten a driver disc with the converter cable. The one I just received for a pc client has a CD that says it's for Windows and Mac.
One problem though, the disc is a mini-cd. Not great for slot loading drives, and the driver says Mac 10.1 - 10.3.3. Maybe that's when they made the cable, but I wouldn't be very surprised if it didn't work with Leopard. It's going on a PC so I won't have to worry about it for now.
Side note about these cables - I have another client who wanted to control his ham radio gear from a Mac running WinXP on Parallels. It wouldn't work in WinXP until I removed the driver from the Mac side. Windows kept complaining that the device was already under control by another program - it meant Mac OS. I'm not sure how I would have been able to make the device work both ways, but luckily, didn't have to find out.
Leopard saw his Radio Shack cable fine from System Profiler.
Message was edited by: dechamp -
I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8
I have downloaded the latest UFR II driver. (UK Version)
I am trying to connect to the printer but the printer is not appearing in my Print/Fax Preferences.
When I click the box "More Printers" under the Default printer the drop down box gives me a heading "Canon IPv6 (UFRII) with the option to add or cancel. (The add is highlighted). But there are no printers showing in the box. Nothing. Can anyone help?
Is there a problem with my Mac setup or maybe a setting in my printer?Mac UFR II Printmonitor
UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
Other Printers:
Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities] -
iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro
Thanks. I realises that i will hv to go to iphoto to see the photo. Its now working !!!!!
-
My ipod ejects itself, immediately after connecting with usb cable, before synchronizing could start. What’s wrong?
Have you tried plugging the iPod in with a different USB sync cable to verify the issue is not with the cable? It might not also hurt to connect it to another USB port as well.
Otherwise, try manually placing the iPod into Disk Mode and then connecting it to your PC.
Putting iPod into Disk Mode
B-rock -
My Macbook is getting freeze when i connect with USB cable
After I updated to OSX 10.7.4 Lion (Default 64bit).I try to use the touch panel device that I using before. But it keeping occur system freeze when I connect the usb cable.
Sometime I can operate it normal but the percentage is very low.
What 's the problem on?Could be a bad cable or the device isn't compatible with Lion and it is causing problems.
-
My mini iPad is now not working . just showing iTunes sign and to connect to usb cable.
my mini iPad is now not working . just showing iTunes sign and to connect to usb cable. I have done that buy macbook is not discovering iPad as a device. Any ideas ?
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
iPad Stuck in Recovery Mode after Update
http://www.transfer-iphone-recovery.com/ipad-stuck-in-recovery-mode-after-update .html
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
Wi-Fi Sync Not Working? Here’s How to Fix it for All iOS Devices
http://osxdaily.com/2013/02/17/wi-fi-sync-not-working-fix-ios/
Cheers, Tom -
Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?
Solution may be found if you search in the "More Like This" section over in the right column.
-
My MacBook Pro shuts down when i connect a USB cable.
My MacBook Pro shuts down when i connect a USB cable, only when its a 30 pin apple cable. Well one USB shuts it down and the other one doesn't work at all.
it only happens when i use an apple cable. It has no problem with my external drive nor with other things.
Ps. i did use different apple cables and they all shut it down.What are you connecting? iPad, iPhone, what?
When you say a 30-pin Apple cable do you mean a Lightening to USB cable?
Little more info needed...
Clinton -
Any way to update to Lollipop without USB Cable? | Xperia Z Ultra
Hi!
Please help me find a way to update without USB cable (my usb is not working, I charge the device with the magnetic port).
Solved!
Go to Solution.There's no answer to that question, Sorry. but check
settings > about phone > software update
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
I have an iphone 4, iOS 7.1.2
Mac book pro 13in Mid 2012, with OS X VERSION 10.9.4, Processor speed 2.9 Ghz, Memory 8GB 1600MHz DDR3, Intel core i7, Storage capacity 750 GB, 650 GB available.
WHEN I CONNECT, THROUGH USB CABLE, MY IPHONE TO THE MAC BOOK PRO, THE ITUNES APP STOP RUNNING AND I CAN NOT SYNCRONIZE THE IPHONE.Hello skkmmayer,
That is probably a lot of stuff you do not want on your iPhone. So this can be handled a few different was. For you current situation, you can delete the apps directly on your iPhone by holding on the app until it starts to jiggle and then tap on the X of all the apps that you do not want. The second thing you can do is before you sync with iTunes, look at the app section on your iPhone to know what gets transfer to it and you can deselect items that you do not want. Lastly, if you download content on your iPad and it is a universal app, you can actually download it directly to your iPhone by looking at your past purchases and download it directly from the App Store. Check out the articles below for more information if need further assistance.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
iTunes 11 for Mac: Sync and organize iOS apps
http://support.apple.com/kb/PH12115
Download past purchases
http://support.apple.com/kb/HT2519
Regards,
-Norm G.
Maybe you are looking for
-
Draft View Not Displaying Correctly
We have recently redesigned a website that is using Contribute which appears correctly on the live domain. However, whenever you try to edit a page within Contribute, the draft view doesn't show the new images or CSS. Does anyone know why this could
-
I have been using Mozilla for about 4 years and never had any problems in opening a new tab manually. But since yesterday, I am not able to do so. I even uninstalled Firefox and then re installed it. No change.
-
Multi insert on table with checkbox list
Hi all, I've a problem perhaps it's a small one but I need to do an insert on a table with with the use of a checkbox, however the checkbox retrieves multiple values. Which I've tried to insert with a loop in the pl/sql block. How exactly can I do th
-
Can the myRio have a SFP+ connector added to it?
I was wondering if anybody knew if you could connect an SFP+ digital output to any of the pins of the myRIO device. The goal of this is to add a 10Gigabit network connection. Thanks
-
Phone shut itself off and won't turn back on
I though maybe the battery had died without me noticing but I have had it plugged in for about an hour now and nothing, I tried the hard reset, switching cables, outlets, and my computer. Nothing. Any advice? Help? Suggestions?