Photosmart 6510 Printer error/Blue screen on printer display Code:B864F472

Hello
I'm having a reoccurring problem with my HP Photosmart 6510 all-in-one. The printer will stay on for about five minutes, give or take, and proceed to flash a blue screen (on printer display) with error code B864F472
Next the screen displays a "Printer Error" message followed by "Please turn printer off and then on" with all lights on the printer flashing.
It will display this until I cycle the power and it repeats the same behavior after about five minutes.
I've searched extensively for a solution and have tried multiple things. Such as:
-Unplugging from back of printer and wall, 30 sec wait then plug back in.
-Clean cartridge and print header contacts.
-Set static IP.
-Printed various reports from service mode, No errors, Excellent signal strength.
-Connected to laptop through USB.
-Partial reset, Semi-Full reset.
-Reinstalled drivers on all computers.
-Updated firmware/software on printer itself.
-Ran HP Print and Scan Doctor.
-Reset Router
I'm at a loss now. The unit is just over a year old. I have two laptops and a desktop on the same network. Two computers running Windows 8.1 64-bit and the other Windows 7 64-bit.
Any help will be appreciated. Thanks in advance.
-Lee

I have the same problem. and no solution
All seems to work before the 5 minuts (I can print diagnostic page from the PC), then I think it a microcode problem ...

Similar Messages

  • Photosmart 6510 Printer error message 0xc19a0003.

    I have a Photosmart 6510 Printer error message 0xc19a0003. I have re-powered the printer but still get the error message Oxc19a0003. Suggestions to fix?
    Thanks!

    You are correct, gksurgeon, the 5510 does not have a removable printhead. If you followed the steps in the document above, then the printer will need to be replaced.
    If you are still in warranty, HP may replace the printer at no cost to you. I'll link the information to get in touch with them below. The link will take you to a form to fill out. Once you fill it out and it is processed, it will give you the printers warranty information, a case number, and the phone number to call.
    HP Technical Support Case Call Form:
    http://goo.gl/w7Hgh
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • I bought a 364 XL cartridge for my Photosmart 6510 printer, but it doesn't fit.

    I bought a 364 XL cartridge for my Photosmart 6510 printer, but it doesn't fit—it's too wide. Yet the User Manual I downloaded from HP (helpfully called c02983796) clearly shows an illustration of the XL cartridge fitting in the printer. Advice?
    This question was solved.
    View Solution.

    Hi,
    The HP 364 XL Black ink cartridge been updated in September 2010.
    Take a look in the following document:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02750681&lc=en&cc=us&dlc=en
    If your ink cartridge is the older ink cartridge you shoulf contact the retailer to replace it.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Black ink not printing on my hp photosmart 6510 printer

    I have a HPphotosmart 6510 printer that all of a sudden doesn't print in black ink anmore. I have done everything that I read to do. Even replaced black ink a couple times. I don't want to replace my printer its not that old and I reall like it.

    Hi @Barbiegirl17 and welcome to the HP Forums!
    I'm sorry to hear you've had issues printing black with your Photosmart 6510 printer, but I will absolutely do my best to lend a helping hand
    I will suggest that you try the steps within this Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages document first. If that doesn't resolve the issue can you please let me know whether it's in or out of warranty and what country you reside in? Thanks!
    Hope to hear back from you soon!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • STOP ERROR - Blue Screen - on Lap Top - Fixed, tear1, support rocks!!!!!!

    New Iphone, and new laptop, installed itunes Noprob,
    Hooked Iphone to usb laptop found Iphone and installed and activated Noprob,All systems go, I am loving it.
    I then ejected my Iphone and hooked up my Ipod to transfer purchesed music and shows transfered Noprob, so I eject my Ipod to hook up my Iphone to put my purchesed music on it.
    THATS when it happened.
    STOP ERROR- Blue screen,cpu restarted on its own.
    I deleted itunes and I deleted camradrives, printer drivers.
    I tried allmost everything and still got the same blue screen.
    To make a long story shorter I called apple talked to the (now this is important) Iphone/Itunes department they are seperate but have a div. that works as one but you have to ask for the department that takes care of both or you will talk to both or 3 or 4 other dept.
    Tear 1 Support had me do a soft reset on my phone it did not work so I backed up my phone # and they showed me how to do a compleate reset and it worked.
    I have been Error and blue screen free for 2 days and I feel very posative about the future with my relationship between my cpu and my phone
    Thank you for your time.
    I hope I help some one I found no relief here with my problem but its a great resource for information
    GOD BLESS TEAR 1 SUPPORT YOUR TEAM ROCK'S
    Pro-Iceman
    Anacotes,Wa

    You don't need to upgrade your software.  But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
    If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3.  It's easy to use in DW CS4, 5, 6 or CC.  More importantly, it's bullet proof and works in all devices. 
    Pop-Menu  Magic3 by PVII (commercial DW extension)
    http://www.projectseven.com/products/menusystems/pmm3/index.htm
    If you don't have a budget to work with, you can roll your own menus with jQuery plugins.  A bit more effort on your part, but they perform better than Spry.
    jQuery Superfish
    http://users.tpg.com.au/j_birch/plugins/superfish/
    jQuery MegaMenu2
    DEMO:
    http://www.geektantra.com/projects/jquery-megamenu-2/
    DOWNLOAD:
    http://code.google.com/p/jquery-megamenu/
    Nancy O.

  • Unmountable boot volume error blue screen

    I have a toshibia laptop that has crashed, I am eventually getting the unmountable_boot_volume error blue screen, the recovery disks that i ordered will not work, just disk 1 loads windows file then goes to a black screen with the cursor pointer, computer repair does the same thing, os is windows 7 satellite c655d-s5120 64 bit the bios does show the hard drive name and the boot log is showing the last driver loaded is windows/system 32/drivers/atipcie.sys, can I order a recovery for the windows 7 or is there any other ideas to fix this?not sure why this is happening

    If you've already ordered a set of recovery discs, you probably don't need to order another one. While it's possible that the discs are bad (and maybe you should call customer support just to see what they say), it's also possible that you have a hardware failure of some sort.
    - Peter

  • Error blue screen with KM2M Combo Board

    The setup of my PC is:
    KM2M Combo L
    Athlon 2200+
    1x128 Mb DDR PC 2100
    S3 graphics pro savage DDR (on board, currently 16M)
    AC97 audio controller (on board)
    HDD Samsung 6 G
    CD 52x
    Floppy drive
    Mouse, keyboard PS/2
    Windows XP Home version 2002
    The problem is this:
    Once the operative system is installed, the pc works correctly. When the drivers on the board drivers cd are installed, the system crash often, especially playing a movie or running a game, and a error blue screen are shown.
    Please somebody tell me how can I solve this fastidious problem, or at less, what the failure could be.
    Thanks a lot!

    What brand of memory ? Perhaps 128 Mb. of memory is too poor, since your problems happens when playing videos or games. Borrow a 256 Mb. module and see wha happens.-  8)

  • Photosmart 6510 printer

    How do I print from my iPad2 on the 6510 printer

    There will be color ink used during printing to keep the nozzles clear.  Color ink is also used for graphics unless you have selected "black ink only".  If you print with photo media color ink will be used exclusively, the black ink is not compatible with photo paper.  Color and black inks are also used if you ever tell the printer to perform a cleaning cycle (seldom needed).
    The document here has information on how ink is used, the Photosmart 6510 is an IIC printer in the terminology of that page.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Hp photosmart 6510 printing and photocopying blank pages even after putting in new ink cardridges

    Hi there, can anyone help?
    My photosmart 6510 has recently started printing and photocopying blank pages.  The ink cardridges were low and I have replaced them with new ones. I have cleaned the printer head and the test comes out in colour.
    I have no idea what to do other than buy a new one !
    Any advice appreciated.

    Hi @TG13,
    I'd like to help. Please begin with the steps in the following document; Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Deskjet Ink Advantage an...  < this applies to the 6510, and 6515 too.
    If you complete, or have already completed all of the steps in the document above and the issue continues, my own personal recommendation, not one of HPs, is to use the solution offered in the following video.  I only suggest doing this if the printer is out of warranty; How to fix a HP Printer, not printing black ink and missing colours 
    Based on the comments, it looks like this will help 
    King_Zog wrote:
    I tried most of the suggestions in this thread, but stopped short of disassembling the print head. Nothing worked until I saw the video referenced in Sunshyn2005's message. That did work, but not on my first try. For the second attempt, I left the wet paper towels in place for a couple of hours to really soak the print heads. That did the trick.
    So, thank you Sunshyn2005, for pointing me to the solution.   - Source
    Although the printer might be out of warranty, if the issue persists, HP may be able to offer you something. Maybe they can offer you a discount on an alternate model. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    If this resolves the issue, please let me know so we can help others who may be experiencing the same issue.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Can a hp photosmart 6510 printer work with a wired pc with a wired router?

    Would the photosmart 6510 e-all-in-one printer work with a old wired pc and wired router?  I do not know anything about wireless.  I have a desktop pc XP HP.  
    This question was solved.
    View Solution.

    Hi,
    Based on the following link:
      http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02907978&tmp_task=prodinfoCategory&cc=us&dlc=en...
    this printer does not have a wired LAN card. Well you have to use wireless or USB.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hp photosmart 6510 printer connected via bluetooth

    well i am planning to buy a hp photosmart 6510 all in one printer.now there is no wifi connectivity in my locality.so can i connect my printer to my tablet or laptop via bluetooth usb adapter?if yes,HOW?moreover does usb bluetooth adapter other than hp works with this printer?

    Sorry no this printer does not support Bluetooth.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Vista SP2 BUGCode error blue screen dump

    I haven't had a days problem with my PC for almost 2 years.  Keep up with updates routinely.  Installed SP2 and now get blue screen dumps.
    Been working with Microsoft for a week.  Have isolated a USB Generic HUB driver if disabled I do not dump.  Driver appears to be related to internal fingerprint reader that uses digital persona sw.
    tried updating the driver an no good.  Any ideas?
    Apparently there is an issue with HP's and this upgrade on PC using Nvidia controllers.  Suppose to have an unpublished hotfix but the file was empty.
    Since it is related to Digital Persona (i think) microsoft won't be able to help anymore.
    JP5

    Benn working with Microsoft support for free they have put in over 20 hours on this.  We have traced ti to the finger print reader from authen Tec and my HP all in one C7280.  If the reader is enabled and you plug in the printer it will crash within 20".  If I disable the reader I can plug in the printer,
    Prior to SP2 it ran fine.  Microsoft is reluctant to remove SP2 and I am not happy with HP as their software updater is te one that told me to install it and they want to charge for telephone support even though it is apparant it is a driver from their 3rd party software.  they said to update bios which I did and it did nothing.
    JP5

  • My Computer crashes when i connect my Ipod. (Stop error, Blue Screen)

    For the past 3 weeks, my computer has been crashing regularly-- and it's due to the iPod. When i connect my ipod, iTunes starts up and as soon as it starts to Sync, it "blue screen crashes (see message below). When i run iTunes w/o the iPod connected, no issues and i can also use my iPod no issues:
    The Message i get is below: ..its a Stop error:
    * STOP 0x0000008e (0xc0000005, 0xBFA6FCBA, 0xA9F5130C, 0x00000000)
    * Ati3duag.dll -- Address BFA6FCBA Base at BFA1C000 DateStamp 3eade1b1
    Please help me!!
    Gateway Laptop Windows XP Pro

    i am having the same problem, but cant even get on my pc now with out using a system recovery disc! im really stuck and hope someone knows of a way of sorting this as i have only had it 2 weeks!! many thanks

  • Critical error, blue screen stop error

    after installing installation CD today, my laptop keeps going to a blue screen reporting a STOP error.... a critical error, but can't reslove. Have now removed the iTunes and it hasn't happened yet.
    Maybe a conflict, I don't know.
    Dell Inspirion Laptop   Windows XP  

    I found the answer !  Turns out it is/was not a Win7 problem, but a drive problem.
    I was following some links on another Win7 forum and happened upon mention of SSD drives causing a BSOD.  The one in particular mentioned was a Crucial M4 SSD. It sounded familiar . . . I have one as my C: drive.  Turns out I needed a firmware
    update. The update corrects a condition where an incorrect response to a SMART power-on counter will cause the m4 drive to become unresponsive after 5184 hours of Power-on time. The drive will recover after a power cycle, however, this failure will repeat
    once per hour after reaching this point. 5184 hours is about 7.2 months. Just a bit under how long I've had this system.
    I applied the update . . . . . computer has been running seven hours now.
    Thanks to all who helped me here.
    Joe
    Wanted to add for reference:
    The original post from Crucial acknowledging the issue.
    BSOD Crucial M4
    The fix is as simple as updating the firmware, but the hoops to jump through for the firmware update to take place is a bit frustrating.
    With my board, z68-v pro, it was necessary for me to go into the bios and change my controller mode to IDE. In addition I needed to remove the drive connected to the Marvell port and plug it into the Intel port as well as put my two ssd's on the first and
    second Intel ports. Once this was done I was able to get past the 'finding drives' screen and update the firmware for both ssd's. Once the update finished I went back into the bios and changed the controller mode back to AHCI. As i said, a frustrating experience
    but I commend Crucial for owning up to the issue rather than lead people to think their ssd's needed replacing or something was wrong with windows and subsequent unnecessary re-installs.

  • Blue screen error /Blue screen of death(Your pc ran into a problem and needs to be restart)

    Hello, 
            About 15 days ago,my laptop is showing blue screen errors,really this is very frustrating.
             I use a lenovo laptop,
    Processor
    Core i3 (3rd Generation)
    System Memory
    4 GB DDR3
    HDD Capacity
    320 GB
    Operating System
    Windows 8
    System Architecture
    64-bit
    Dedicated Graphics Memory Type
    DDR3
    Dedicated Graphics Memory Capacity
    1 GB
    Graphic Processor
    NVIDIA GeForce 610M
    i have tried methods like , 1) un installing the anti virus (Quick Heal Total Security) and re installing again
                                              2)Turning Firewall on and off. Because someon said that this could be a cause of Anti virus..
                                              3)Optiminzing the disk drives...
                                              4)i have used a software called "Blue screen view".which shows all the daetails of blue screen errors
    and all dumps files.And also i deleted all the dump files and folder , but also the problem persists.
                                             5)in Google search someone told that to update all the drivers. i have also done that
                                             6)i have uninstalled and reinstalled the graphics driver.
      So, i have tried all the methods given online,but i didnt get any help from it.
    So please help me . I am tired of all this 
    *Sorry for poor english

    Without the Minidump Files to help us isolate the cause of the errors you are experiencing there is no way to provide assistance specific to your situation.
    One of the most common causes of errors are drivers. You have already mentioned that you have upgraded your graphics driver to the latest version provided by the manufacturer, updating other drivers like network, chipset, and storage controllers is a good
    next step. If no driver updates resolve your issue and you have already looked into security software as a possible cause, another direction to take would be to review your hardware for possible failures. You can diagnose your memory by
    entering “Diagnose your computer’s memory problems” at the start screen and selecting the result. You can also diagnose your storage devices by
    right clicking the storage device in File Explorer, selecting properties, and selecting Error Checking.
    Brandon
    Windows Outreach Team- IT Pro
    The Springboard Series on TechNet

Maybe you are looking for