Photosmart 6520 Default Settings

Can someone please explain to me how I change the default setting on a Photosmart 6520 to single-sided (non-duplex) printing?  My operating system is OS X Mavericks.  Many thanks in advance.
This question was solved.
View Solution.

Hi,
Follow the steps below in order to disable two-sided print jobs:
Open the file used to print, On the File menu, select Print. The Print window appears.
NOTE: The Print window might be minimized. Click on Show Details to see all available settings.
In the expanded Print window you will find next to Copies the checkbox for Two-Sided. Check the box.
NOTE: If the checkbox does not appear within the specific application print dialog, skip this step.
Click the lowest selection box listed as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
Select Layout from the drop-down menu.
Set the Two-Sided option as Off.
Finally, click the Presets menu, save your current settings as a Preset and complete the print job, the used preset will remain default till another preset will be used.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Lost my photosmart 6520 by manually changing server address

    Hi
    My printer is wirelessly connected and prints fine by AirPrint and when I send it jobs by email but after successfully scanning to email several times it suddenly wouldn't connect to the Internet, giving an error message. Tried turning it off and on several times. Looked up help on forum and followed advice to manually change DNS server to 8.8.8.8 and alternate server to 8.8.4.4. This resulted in my losing access to my printer via its IP address on my browser so I can't undo my actions and my printer still gives error message when I ask it to scan to email. All other functions work.
    Please help. Thank you
    This question was solved.
    View Solution.

    Hey @Kybosh, 
    Welcome to the HP Support Forum.    
    I understand you're having connectivity issues with your HP Photosmart 6520 e-All-in-One Printer.  I would like to assist you with this.
    I'm surprised that a manual DNS has interfered with your setup - I typically find it does the opposite and strengthens connectivity.  At any rate, don't despair!    I have some suggestions that may restore your printer's functionality.  
    I recommend a fresh start by restoring your printer's factory defaults to rule out any lingering setup issues.  Here's how: 
    From your printer's front panel, touch the wrench icon
    Touch Tools
    Touch Restore Factory Defaults*
    *Note that this will reset your wireless and webservices settings.  If you have a custom ePrint address it will be erased permanently.  Click here for more information on setting a custom ePrint address.  
    With your defaults restored, continue on as directed:
    Touch the wireless icon ()
    Run the wireless setup wizard and reconnect to your network (SSID)
    Enter the wireless password if prompted
    Once you've established wireless connectivity, re-enable your webservices/ePrint feature (essential for using scan to email)
    Touch the webservices icon ()
    Enable webservices and touch OK to allow your printer to update itself automatically
    Once completed it will print an info page.  If you're looking to complete an ePrint setup it will come in handy later - click here for more information.  
    Now, if all went well you may rebuild your scan to email setup: 
    Touch the Scan icon
    Touch Scan to Email
    Input your personal email address
    Retrieve the PIN from your email inbox
    Input the PIN in your printer as prompted to complete the setup 
    Did the above-noted steps restore the functionality you were missing?  
    Please let me know the result of your troubleshooting by responding to this post.  If I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below.  
    Thank you for posting in the HP Support Forum and have a great day!  
    E-roq
    I work on behalf of HP.
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Photosmart 6520 Scanning

    I have just purchased an HP Photosmart 6520 to replace my 6510 which was malfunctioning. I always do my scanning from the the HP Scan on my iMac; with the 6510 I could go into Preferences and change resolution/colour or black & white or grayscale/crop size if wanted each time I scanned. But those preferences do not exist, or at least I cannot find them, in the 6520 HP Scan utility. I have downloaded the latest software. There is the "Scan to Computer" options but changing them makes no difference to scanning from the computer, which means that I am, so it seems, left with having to use the defaults built into the software (200 dpi colour for photos and 300 dpi grayscale for documents). Is there any way I can change these settings to my own requirements for each scan, i.e. I never scan photos at less than 300 dpi. My operating systen is OS X Mavericks. 

    Hi TomTreb,
    Welcome to the HP Forums!
    I see that you are missing some scan options for your HP Photosmart 6520, on Mac OS X 10.9, and I am happy to help you with this scanning issue!
    Please make sure that the Airprint driver has not been selected as the default, it should read as HP Photosmart 6520. Click on the Apple Icon, System Preferences, then Print & Scan. Then look at these screenshots:
    Let's start with that, and let me know what happens!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • HP PhotoSmart 6520, Printer offline, Wireless printing from Windows 8.1 and others

    My parents own an HP PhotoSmart 6520. They have 3 or 4 computers. 1 Is connected to this printer via USB cable. 3 Are "connected" over wireless. The printer has the latest firmware updates according to checks from the printer front display.
    Problem is this:
    1) When first starting the printer, and the printer gets on the wifi network, all wifi-available devices can print to it over wifi. We are also able to browse to the printer config web pages to see status, and change configs as needed.
    2) After about 5 minutes of printer inactivity, all wireless clients can't print to the printer to print, and can't connect to the printer's web page. (The printer appears to be offline to each OS that uses WiFi to get Internet access.
    3) If we visit the printer control screen, physically attached to the pinter, find the network configuration, and choose to "turn off" wifi at the printer, then after off, "turn on" wifi and see an IP address get assigned, then all WiFi machines can print to the printer over WiFi. However, after 5 minutes, again, the printer is offline. No matter what or how much each WiFi-based machine sends to their printer queue/spool, the printer remains offline.
    4) If the USB-connected machine prints to the printer over USB, the printer once again becomes available over the wireless network.
    The work-around is terrible. (Cycle WiFi access every time they need to print from Wireless devices.)
    Things we have tried:
    1) This is running the latest firmware according to the WebService section request to check for upgrades. They are on the latest according to the results. (no help)
    2) DHCP was the initial config for network settings. I moved to a DHCP server configuration with static IP served by printer MAC address. (No help)
    3) I switched to totally static IP address, thinking it might be a DHCP lease-time/renewal issue, or custom vendor string issues or bug. (no help)
    4) Enabled/Disabled IPv6 even though they are on a NAT-ed network with only IPv4 support. (no help)
    5) Visited printer config with web broswer, and change energy saver setting from "5 minutes" to "15 minutes" because the ~5 minute window seemed like an approximate time limit. (No help)
    6) Enable/Disable other settings through the web and restart the printer. (No help.)
    7) Suggestions listed here: http://support.hp.com/us-en/product/HP-Photosmart-6520-e-All-in-One-Printer-series/5169038/model/516... (No help)
    In testing this, with static IP or not, from other machines, when we can print over WiFi to the printer, the IPv4 address is ping-able from peers on the network. After ~5 minutes pass, and the pinter goes "offline" there are no ping replies to the static or other IP address assigned to this printer. By all accounts, when the printer is "offline" it really is no longer on the WiFi network. Meanwhile, oter devices can ping each other. (All computers, smartphones, tablets, etc can all respond to ping.)
    None of the other devices suffer from dropped access to the WiFi and Internet.
    Suggestions?
    I do not have access to this right now, but I can walk my parents through whatever steps are needed to resolve this.
    Thanks!
    P.S. Other things tried:
    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/If-your-printer-drops-off-your-network/...
    1) When online, generating report, reports online
    2) When offline, report reports that it is still associated with access point
    3) Printer is about 2 feet away from the access point it is communicating with and has max-bars showing signal strength.
    4) Channel allocation for WiFi was selected based on least used channel, and works very well for all other devices on this channel.
    5) There is only one accesspoint with the name it associates with.
    6) The only options for power-saving "auto-off" we see via web pages from printer are: 5 minutes, 10 minutes, and 15 minutes, and changing to 15 minutes does not allow the printer to remain online for 14 minutes -- it still goes offline to the network after ~5 minutes -- even agfter changing this settings and power cycling the printer.
    7) No wireless extender is being used.
    8) We tried static IP, Dynamic IP, and statically assigned DHCP served IP.
    Once printer is "offline" when visiting printer to tell printer to disable WiFi access, then re-enable it, all machines with items in their printer queue/spool *immediately* de-queue/de-spool their printer jobs to the printer.
    This is the closest description: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Photosmart-6520-goes-off-line/td-p/324... Where is that patch?

    Hi @TheSynAck,
    I see you are using a Hot Spot, I believe we have found the reason for the connectivity issues. There may be a setting that needs to manually configured for the Hotspot to 'allow' your printer access. Also, hotspots may have limitations and restrictions that may cause connectivity issues.
    Take a look here: Setting up the Printer as a HotSpot, it shows a Laserjet but the same steps apply.
    Keep in mind that Hotspot connections are 'best effort' connections due to the issues of inconsistencies within the connection. They are not routers. Therefore, you may experience issues in the future when using the Hotspot for your connection. Usually a powercycle or hard reset of the HotSpot will resolve such issues.
    I would not recommend getting another Hot Spot as the connection is not guaranteed, you could however try a Wireless Router if you are looking to upgrade anyways.
    With the PS 6520 you also have the ability to print using the HP Wireless Direct printing option. Please click on the link below to get started:
    HP Wireless Printers - Printing with HP Wireless Direct
    I hope this gives you a better understanding of the intermittent connection issues.
    Thanks again,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Unable to print from my iPad to HP Photosmart 6520

    I recently purchased this Photosmart 6520 printer so that I can print from my iPad.  I do not have a laptop that works in order to install the software that is included.  The salesperson who sold this printer to me said that I didn't need a computer in order to have this printer work w/ my iPad.  
    I've connected the printer to my wireless network, I've received the printer's e-mail address and enabled e-print.  On my printer it says that e-print is connected and On.
    I've downloaded the eprint app on my IPad and connected it to my printer.  It recognizes my printer but when it goes to print it says "oops! we could not complete the job.  please try again. " "there was a problem during printing. please check your printer try again"
    I'm getting all my jobs in the queue but none of them will print.  and when I go to my email or try to print a document from my ipad w/o using the HP e-print app its telling me that there are no airprinters found. 
    Please help me.  this is the 3rd printer i've bought trying to get it to print w/ my iPad and i'm not having any luck! what's wrong?  I'm not getting any errors on my printer.
    I also did a wireless network test on my printer and it says no problems found.  I'm confused why isn't my iPad recognizing this airprinter?? and why can't I print.  All the print jobs say failed. 

    Hi,
    iOS Uses Bonjour services to communicate with the printer through the network, those relies on Multicasting.
    Some routers shipped with Multicasting disabled by default and some does not support those protocols at all.
    Please try printing using Wireless Direct and check for any difference, if the feature works without using the router that indicates the issue as router related and will allow us to better understand how to go further,
    To set up a direct connection using Wireless Direct follow the steps below and try pritnign from your iPad:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03351623&cc=us&dlc=en&lc=en&product=5169041&tmp...
    Please let me know if the feature works while bypassing your router or not, as well be sure to clarify your router brand and model.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Photosmart 6520 - shows offline and has stopped rotating printing for short-edge binding

    I have suddenly had some issues with my HP Photosmart 6520 printer. I use a wireless connection with my Macbook Pro (OSX 10.9.5)
    First problem is that the printer icon in the dock has recently shown to be offline/not connected. The printer would print pages of documents in the computer (Open Office stuff) but would not print material direct from a web browser. Now (a few days later) it showed to be offline and wouldn't print anything.
    I should point out that the printer device list in System Preferences shows two different entries: one is "HP Photosmart series 6520" (listed as offline) - and the second is "Photosmart 6520 series (FDA82D)" (listed as idle).
    The first ("HP Photosmart series 6520") had been ticked as the default printer.  I then ticked "Photosmart 6520 series (FDA82D)" to change the default printer.
    Then I noticed, when I used the Print command for a document, that the printer list in the Print dialogue box showed that it had a tick against the "HP Photosmart series 6520" printer. When I changed this to the ("Photosmart 6520 series (FDA82D)" printer, the machine printed my document. But the next time I opened the print command, the tick was once again next to the "HP Photosmart series 6520" printer.
    The printers listed in the Print dialogue box have small icons to their left. The "HP Photosmart series 6520" has a wavy line inside a circle and the "Photosmart 6520 series (FDA82D)" has an exclamation mark inside a triangle.
    The second problem is that the printer is no longer rotating the second page when I am printing two-sided and choose "short edge binding" in layout. It now prints out exactly the same as when "long edge binding" is selected (default). The result is that the second page is printed upside down in relation to the first page. This problem has never previously occurred.
    So far I have tried paracetamol and scotch but neither seems to solve these problems. Not sure if I should try them together!
    Sorry this is so long-winded - I'm trying to include as much detail as possible to make it all clear from the start.

    Hello lenc48,
    Welcome to the HP Forums.
    I see that you are having a few issues when it comes to printing from your mac as well as some two sided printing issues.
    I do have a some suggestions that we can try in the attempt to troubleshoot this issue.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    Please remove the usb cable (if using wireless, disregard this step) from the printer and from the Mac and leave it disconnected until further notice.
    Please click on the first link that will give you instructions on Uninstalling the Printer Software.
    Once the software has been removed, please disable any anti virus protection that you may have on the Mac. 
    The next step we are going to take is downloading the HP Photosmart 6520 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks.
    The installation will prompt you when to connect the usb cable (You will see a prompt for a wireless connection as well if that is the connection type you would like to use) so please do not connect the cable until prompted to do so.
    If you are still having issues, feel free to write me back or you can contact HP Total care direct.  If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Wireless printing from HP Photosmart 6520

    I'm trying to set up my new HP Photosmart 6520 printer to print wireless.  I have the Wireless Direct turned on. The trouble happens when I go to the wireless radio and click on the name of the printer. I get an exclamation point in the middle of the radio waves that show connection to the Internet.  For some reason, it isn't connecting to the printer. Any suggestions?

    Hi @Karobn 
    I understand you have the Wireless Direct on, but I am a little confused about the exclamation point in the middle of the radio waves that show connection to the Internet. Are you trying to connect the computer to the printers Wireless Direct network, or are you trying to put your printer on your home network, have the computer on the same home network and thus be able to print wirelessly and have internet access?
    If you are trying to get the printer on your existing network, follow the steps below;
    On the control panel, touch the Wireless icon ().
    Touch Settings.
    Touch Wireless Setup Wizard.
    The Wireless Setup Wizard searches for networks, and then displays them in a list.
    Touch the name of your network.
    NOTE:The printer wireless setup wizard provides instructions to configure the wireless connection. Follow the instructions on the printer control panel, or continue with the following steps.
    - Source: Printer Does Not Maintain Wireless Connection
    If I have misunderstood the issue, please let me know and provide me with any additional details you feel may help me help you. 
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Photosmart 6520 scanning function failed

    The scanning function (both from the pc and from the scanner itself) has failed. It seems to make all the right noises, then the message 'now copying page 1/1' shows on the display for sometime, until it is replaced by 'cancelling', then the scan fails. It may or may not be in warranty, but it has been impossible to dispute the status of the warranty as that section on the HP website isn't working. Any suggestions would be much appreciated. Thanks.

    Hey @fearless_fred,
    Welcome to the HP Support Forum!  I understand your HP Photosmart 6520 e-All-in-One Printer's software and front panel scanning functionality has ceased.  I would like to assist you with this.  I have some steps that may resolve the issue.  
    I recommend approaching the problem from a hardware perspective first.  Try performing a hard reset:
    Next, try making a copy from the printer's front panel.  If it fails as before, move onto the next step and restore your printer to factory defaults:
    From your printer's front panel:
    Touch the wrench icon
    Touch Tools
    Touch Restore Factory Defaults
    Once the restore is completed, you'll have to reconnect your printer to the wireless network (if you're a wireless user) and re-enable webservices (if you're an ePrint, scan to email or Printables user).  If you are able to make a copy successfully it would make sense to troubleshoot the printer's software setup and restore your scan to computer functionality.  (Further steps posted below)
    If you're still unable to make a copy, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    With respect to your concerns about warranty, our technical support via phone can check your printer's warranty status and present resolution options accordingly. 
    If you have copy functionality click here to install the HP Print and Scan Doctor.  When running this utility be sure to click your way through the scanning troubleshooting flows.  If that doesn't restore your software scanning functionality, click here for access to additional troubleshooting steps. 
    Please let me know the result of your troubleshooting by responding to this post.  Best of luck!
    E-roq
    I work on behalf of HP.
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Envelope printing Photosmart 6520 series

    I am having a problem printing envelopes other than #10 from varioous programs. I keep getting mismatched paper messages. I am particularly interested in C5 which are supposed to be supported okay. I have gotten 1 or 2 out  in odd ways, so I know it works.
    This question was solved.
    View Solution.

    Hello Bearfan49.
    I understand you are having problems printing envelopes on your Photosmart 6520. Yes the C5 envelope size is supported for your printer.
    How many envelopes are in your paper tray? The supported capacity is five envelopes.
    Also are you changing the paper settings from the type of program you are printing from? Could you clarify what type of program you are printing from?
    Please follow this document to resolve: Paper Mismatch.
    Looking forward to hear from you.
    Ashley
    I worked on behalf of HP.

  • Photosmart 6520 all in one.does not pick up small photo paper

    New printer,it will print on a4 paper,but will not pick up small6x4,I have taken all other paper out,and tried shutting off and restarting it,I even cleaned the rollers as suggested,still no result,I have only had this three weeks,it did print one picture off when I first tried it,but not now,would be very happy if someone could resolve this for me.
    Regards
    Mr wilks

    Hello Mr. Wilks,
    I am sorry to read about the issue you are having with your new Photosmart 6520 not picking up 4x6 paper. I understand you have cleaned the rollers and that did not resolve the problem. I have researched this and have found a couple of documents that I recommend you look at to ensure all of the print settings are correct when printing on a 4x6 or any other size you wish to print on.
    I am unsure if you have a Windows or a Mac computer, therefore I will post 2 different links for you to look at depending on which operating system you have.
    Here is the document for troubleshooting on Windows: Printing Photos Saved on Your Windows Computer
    Here is the document for troubleshooting on a Mac: Print Photos Saved on Your Computer (Mac)
    I really hope this helps you, feel free to respond if there is anything else I can help with!
    Regards,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Hp photosmart 6520 error 403

    Hi just wondering if you can help me with an issue im having with my Photosmart 6520.
    Everytime i try to 'Scan to email' it comes up with.... server connection error 403.
    I have read that alot of people are having the same issue and that a way to resolve the issue is to factory reset.
    Can i please be sent the steps on how to do this.
    Thanks.

    If you're not using the ePrint feature of the printer and you only use it for Wireless Network Printing and/or Scan to eMail,  you can proceed on the following steps:
    First, tap the ePrint button which is found on the top left corner of the screen (see the picture below)
     Go to Settings, then look for Remove Web Services, hit Yes. It should go back to the Home Screen.
    Tap the ePrint button again then Accept the Terms, press Yes if prompted to enable Auto Update then once done on the process try scanning again.
    Hope this works for you!

  • Photosmart 6520 won't connect via Time Capsule

    Just bought a Photosmart 6520 printer. I have tried to connect it to my wireless network via Time Capsule but the printer thinks MAC address filtering is turned on so is unable to connect. I have checked using Airport utility to make sure MAC address filtering is turned off, which it is, and all other wireless devices connect without any problem. If I move the printer around the house I can connect via an Airport Express but I don't want the printer upstairs. Seems to be a communication problem between the printer and Time Capsule. I have updated the Firmware on the Time Capsule
    Any one any ideas please?

    Hello Frustrated61,
    Welcome to the HP Forums.
    I suggest that we restore the Network defaults from the printer menu.
    I have also located a document on when the Printer Does Not Maintain Wireless Connection.  This will give you instructions on how to set a static IP address.
    I have also located an Apple document that gives instructions on how to Set up a printer connected to a Time Capsule or AirPort base station.
    Thank you for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • How do I reset my HP Photosmart 6520 to it's original factory setup?

    How do I reset my HP Photosmart 6520 to it’s original factory setup?
    This question was solved.
    View Solution.

    Hi,
    Please follow steps below.
    Setup Menu > Tools > Restore factory defaults
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • I cannot print on a 6x8 envelope. HP Photosmart 6520

    I have tried changing the printer settings but 6x8 is not listed as an option.   I have tried other settings but keep getting a message on my printer that there is a paper mismatch and it will not work.  Please help before I toss this printer out a window!  Thank you for any advice.
    This question was solved.
    View Solution.

    Hi janierose and welcome to the HP Forum,
    I understand that you are trying to print 6X8 envelopes and are getting a paper mismatch message. If you have a Mac operating system you can create a custom size. But if you have a Windows operating system that size is not supported.
    Support Envelope sizes from HP Deskjet Ink Advantage 6520 e-All-in-One and HP Photosmart 6520 e-All-in-One Printer Series Printe....
    The following table contains a list of supported envelope sizes.
    Envelope type
    Envelope size
    US No.10
    105 x 241 mm (4.12 x 9.5 in)
    Card Envelope
    111 x 152 mm (4.4 x 6 in)
    DL
    110 x 220 mm (4.33 x 8.66 in)
    C5
    162 x 229 mm (6.38 x 9.02 in)
    C6
    114 x 162 mm (4.49 x 6.38 in)
    Japanese Envelope Chou #3
    119.9 x 235.2 mm (4.72 x 9.26 in)
    Japanese Envelope Chou #4
    90 x 205 mm (3.5 x 8.1 in)
    A2
    111 x 146 mm (4.37 x 5.75 in)
    Monarch
    98 x 190 mm (3.87 x 7.5 in)
    6 3/4
    92 x 165 mm (3.62 x 6.5 in)
    I hope this information helps.
    Thank you,
    I worked on behalf of HP.

  • Photosmart 6520 won't print black (AKA Here we go again!)

    This is my second Photosmart 6520 and they have BOTH stopped printing in black. I have followed ALL of the troubleshooting and have the same problem. The first one I returned to where I bought it as to be blunt the people on the HP Support line were less than worthless and quite condescending even in the light of me informing them that I have worked in IT for 20 years. I cannot find my receipt as I would return this one too and get a completely different printer as this seems to be a constant problem with these printers.  It is under warranty however that involves dealing with the incompetent HP Phone people and getting my intelligence insulted again. If someone on here from HP can help online without me having to resort to the dreaded phone that would be great.

    I can't believe this! I create a case and you close it and tell me to go to the same exact place to open a case! This is intolerable!
    Case details
    Operating system/version: Windows 7
    Product: HP Photosmart 6520 e-All-in-One Printer
    Problem description: This is my second Photosmart 6520 and they have BOTH stopped printing in black. I have followed ALL of the troubleshooting and have the same problem. The first one I returned to where I bought it. This time that is not possible and I want a replacement ASAP.
    Troubleshooting steps taken: EVERYTHING listed online and that your incompetent phone people recommended while they insulted my intelligence.
    Case history
    *** PHONE LOG December 24,2014 01:47:03 [December 23,2014 18:47:03 AZST] wes_mcm Action Type: Incoming call
    This is my second Photosmart 6520 and they have BOTH stopped printing in black. I have followed ALL of the troubleshooting and have the same problem. The first one I returned to where I bought it. This time that is not possible and I want a replacement ASAP.
    Please do not call me, please email me only!
    Equipment Address: ,,N/A,
    Product Number: CX017A, Serial Number: 
    Problem Description: This is my second Photosmart 6520 and they have BOTH stopped printing in black. I have followed ALL of the troubleshooting and have the same problem. The first one I returned to where I bought it. This time that is not possible and I want a replacement ASAP.
    Please do not call me, please email me only!
    Trouble Shooting: EVERYTHING listed online and that your incompetent phone people recommended while they insulted my intelligence.
    OS Revision: Windows 7
    Product Version:
    SAR: Printer
    *** NOTES December 24,2014 01:47:04 [December 23,2014 18:47:04 AZST] wes_mcm Action Type: DEFAULT
    Source: HPSC,HW-SCM
    User: 
    Response Type: electronic
    System Type: Printers and Multifunction
    Problem Area: HP Photosmart All-in-One Products
    BusinessContext:
    Model:
    OS Revision: Windows 7
    Pri First Name: 
    Pri Last Name: 
    Pri_Phone: 
    Pri_E-mail: 
    Entitlement ID: ,SN
    Product Description: HP Photosmart All-in-One Products
    SAR: Printer
    Nick Name: Printer
    SCM PIN Code:
    MV: False
    Contract Level: WA
    *** NOTES 12/24/2014 (M/D/Y) 7:04 AM AZST [UTC -7:00] WES_SWF Action Type: Snic
    CASE [Personal Information Removed] - STATUS CHANGE 12/24/2014 (M/D/Y) 2:26 PM AZST [UTC -7:00] ALOK_KUMAR
    *** NOTES 12/24/2014 (M/D/Y) 2:26 PM AZST [UTC -7:00] ALOK_KUMAR Action Type: Default
    *** EMAIL OUT 12/24/2014 (M/D/Y) 2:28 PM AZST [UTC -7:00] ALOK_KUMAR Action Type: External Email
    Hello 
    Thank you for contacting HP eDelivery.
    This e-mail is in reference to the case no: .
    I would like to inform you that we support only commercial printers. Since, This HP Photosmart 6520 e-All-in-One Printer is a consumer model, you may obtain support from the below web-link and phone support:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=5304883&lc=en&cc=us&dlc=en&lang=en&cc=us
    To Contact HP - Phone Assist for all the number, please follow the following URL:
    http://www8.hp.com/uk/en/contact-hp/phone-assist.html
    You may log a new case for commercial printers using the support case manager Web-link:
    For HPSC use: www.hp.com/go/hpsc
    For Business support Centre use: http://www.hp.com/bizsupport
    This case would be closed and I have provided the required information.
    Thank you for choosing HP e-Solutions.
    Regards,
    Alok,
    HP e-Solutions
    "Our aim is to deliver best in class customer service"
    *** NOTES 12/24/2014 (M/D/Y) 2:28 PM AZST [UTC -7:00] WES_SWF Action Type: Default
    *** CASE CLOSE December 24,2014 21:28:57 [December 24,2014 14:28:57 AZST] WES_SWF
    Transferred

Maybe you are looking for