Photosmart 6525 Internet Not Connected about 3 minutes after turning on

I bought a Photosmart 6525 on 11/20/2012 and have been trying ever since to get it to work wirelessly. There are hundreds of posts in HP forums about this problem, as well as in Windows 7 and Netgear forums. I've tried everything I could find in all of the forums but I can't fix this problem. This printer definitely needs a firmware update to fix it! The printer always loses its internet connection about 3 minutes after turning the power on. My workaround is a USB connection to my Laptop and selecting the Wireless Direct Connection on my iPad for AirPrint. AirPrint only works from my iPad over my normal Wi-Fi network during the first few minutes after the printer is turned on. After that, it will only work over the Wireless Direct Connection and I have to turn off the printer's 802.11 wireless OFF or the iPad can't find an AirPrint printer. That's because the printer status is "Internet Not Connected" to the 802.11 network. But that status doesn't show on the printer's display...you have to print out a Network Configuration to see that the printer has lost the internet connection. My workaround gets me by for now but the situation is certainly not satisfactory. I don't have a wireless printer that works wirelessly even though I just bought one. Also, iPad printing is klutzy since I can't just print from the iPad as I should be able to over my normal Home Wi-Fi network. Instead I have to select the Network Name for the Wireless Direct Connection, then print and then go back to my Home Wi-Fi network. I have four other devices that connect to my Home Wi-Fi network without losing their internet connection and this printer should be able to do so as well! That's why I cannot believe it's a problem with Windows 7 or my Netgear router. I believe the problem is the firwmare in this printer (and probably all Photosmart 6520 series wireless printers). Mine has Firmware Revision PKM2CN1230AR.

Let's try this. Turn off all wireless security for a test. Connect with no security to see if it can stay connected.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

Internet not connecting after ios 7.0.2 update on iphone 5

Internet not connecting after ios 7.0.2 update on iphone 5

Hi there PompasJr,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Camera isn't functioning
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
-Griff W.

Mac is not connecting to TV after using Mini DisplayPort to HDMI Adapter Cable?

Macbook Pro is not connecting to TV after using Mini DisplayPort to HDMI Adapter Cable. 2010 Macbook Pro, just purchased Mini DisplayPort to HDMI Adapter Cable from Amazon. Link here: http://www.amazon.com/Mini_Dis-HDMI-CB6-Mini-DisplayPort-Adapter-Cable/dp/B003OC 6LWM/ref=sr_1_2?ie=UTF8&qid=1406238976&sr=8-2&keywords=mac+to+tv --When i connect both ends of the cable to the TV and to the laptop, the screen will blink, but then afterwards it will not mirror on the TV. I have tried going to display setting but cannot find the arrangements tab. When i searched "arrangements" a message said, "The Arrangement tab of Displays preferences is hidden because you only have a single display attached to this computer." Not sure how to fix this problem. I have connected this laptop to a TV before, but with a different cable other than the one i just purchased. Any help would be greatly appreciated, thanks.

Found the fix. Still don't know if it was Windows, iTunes, or Norton 360, but this worked immediately for me:
+++++++++++++++++
edgravel
Re: iTunes Store Won't Load, Won't Show Error Message
Aug 13, 2011 4:32 PM (in response to Daedalme)
I found a solution posted from Rodfromnework for PC users. It worked for me and easy to do.
Start --> Programs --> Accessories (Right Click on Command Prompt) --> Run as Administrator
then type in:
Netsh winsock reset
Hit enter, restart PC, open iTunes, go to Store
Hope it works for you too.

My iPod will not connect to itunes after windows 8.1 download

My iPOD will not connect to itunes after windows 8.1 download
I already uninstall itunes and made sure there were no file left before I installed again (it didn't appear to be any files left but music I had on it before was still there when I reinstall it)
My ipod does work on my old computer and it was working on windows 8 before I update to 8.1
I don't want to installed again because I just did that and didn't work!
I want to use my iPod on this computer and system. Can this be fix?

Hey TheBurntApple,
Thanks for the question. I understand that you are experiencing issues with your iPhone connecting to iTunes for Windows. While you may have already attempted most of the steps in this article, I wished to provide it to you just in case something was omitted.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

Ipad2 could not connect to itunes after i restore

ipad2 could not connect to itunes after i restore(newest iO7)

Help in here.
iOS: Device not recognized in iTunes for Windows
Or in here.
iOS: Device not recognized in iTunes for OS X - Apple Support
Mac OS X v10.6: iOS device not recognized in iTunes after ...

Why may i not connect wifi mode after atualization? Only 3G is functioning!

Why may i not connect wifi mode after atualization? Only 3G is available.

Why may i not connect wifi mode after atualization? Only 3G is available.

Internet not connected any more...HELP!!!

Hello to all,
I am an happy owner of a dualcore PowerMac G5 2.0.
It has always worked well, but this morning I opened Safari and... "Safari cannot open page because the computer is not connected to Internet."
What? Yesterday it worked at its best...
I try to go on 192.168.0.1 that is mine router ADSL wifi (use the cable firewire) but it does not enter, same message of error: "Safari cannot open pag. because the computer is not connected to Internet."
I try with the Internet logons and guided procedures but nada.
I try on Network Diagnosis, but all ok except light red on Internet - not connected.
Devil, I am connected via wi-fi with the PSP and Internet works. I try with the laptop with cable fw and works, but the Mac not.
What did I made yesterday on the mac? Installed something? Only web upgraded mac OSX 10.4.4 and flip4mac microsoft.
Also I have tried to use instead of the cable, wi-fi with the mac, but null.
The tests that I made on the router say that the guilt is the mac.
It's like if a firewall blocks the tcp/ip. but I do not have firewall except Little Snitch but it is off.
Who helps me?
Thanks 1000!!!
TNX
VEGETA
Ciao a tutti,
sono un arcifelice possessore di PowerMac dualcore G5 2.0.
Ha sempre funzionato tutto, ma stamattina apro Safari e...
"Safari non può aprire la pag. xchè il computer non è connesso ad internet."
Ma come??? Ieri funzionava tutto a dovere...
Provo ad andare su 192.168.0.1 cioè il mio router adsl wifi (uso il cavo firewire) ma non entra, stesso messaggio di errore: "Safari non può aprire la pag. xchè il computer non è connesso ad internet."
Smanetto un po' con le connessioni internet e le procedure guidate ma nada.
Provo su Diagnosi Network, ma tutto ok tranne luce rissa su Internet - non riuscita.
Diavolo, mi collego via wi-fi con la PSP ed internet funziona. Provo col portatile via cavo fw e funziona, ma il Mac no.
Cosa ho fatto ieri? Installato qualcosa? Solo l'aggiornamento mac OSX 10.4.4 e flip4mac di microsoft appena usciti...
Ho anche provato ad usare invece del cavo, wi-fi col mac, ma nulla.
Sicuramente viste le prove fatte sul router, la colpa e' del mac...
E' come se un firewall bloccasse le connessioni tcp/ip in uscita. ma non ho firewall installati tranne Little Snitch ma è spento.
Chi mi aiuta?
Grazie 1000!!!
TNX
VEGETA

tcp/ip problems solved.

ITunes very slow to load if internet not connected

Why does iTunes seem to hang (takes ages to load) when I start it with the internet not connected? I have disabled the check for updates. I suspect the Music Store is trying to access the internet however, there are no preferences to disable this.

Clear your cache, history
*[Clear your cache, history and other personal information in Firefox]]
Check your plugins and extensions are updated!
Make sure your antivirus is not blocking the firefox.

Router WRT54G, after firmware update to 1.02.0, internet not connect.

Hello,
(sorry by my english)
WRT54G V6 - the connection to Internet is hang.
After making a "Firmware Update 1.00.9 - 1.02.0" the connection to Internet I must do it in manual form, and it is hang in intermittent form.
With Firmware 1.00.9, it does not happen east error.
My internet connection is ADSL.
As I can solve this?
Thanks.

Wizzard,
Having the same problem here. After updating the firmware the wireless connection to the network is unstable. After rebooting the laptop most of the time I get "Low or no connectivity" message. Sometimes it connects and dies after a few minutes. And sometimes it connects and stays connected until shut down.
What do you mean by "u have to reset it for 30 seconds and then reconfigure it"? Do you mean you actually have to reset the router to default settings and reconfigure, or just power down and bring it back up?
Thanks,
Stas

Ipad 2 can not connect to server after 2 day internet outage

Situation:
Internet access was down 2 days and was just restored
Restarted router
iPad 2 connected to appropriate wifi network, but got error message "could not connect to server" when using Safari. Also, could not access any other internet related service like web email.
Other devices --- iPad air, Mac, PC laptop and 2 iPhone 4s ---- were able to connect and access internet successfully.
Actions Taken:
Powered off iPad 2 and then restarted it. No luck.
On iPad 2, turned off wifi setting and then turned it back on. It connected to appropriate network, but still could not connect to server.
Reset router again --- no luck.
Question:
Any suggestions?

Try the following:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo

Itouch is not not connecting to WiFi after 3.1.2 download

Earlier today I was on the app store on my Itouch and I saw there was an update. I got the 3.1.2 update for my 1st generation Itouch. Right after it was finished updating I could no longer get on the app store or any other app that uses the wifi. I have restored my itouch, I have turned my wifi off and back on again, I have turned the Itouch off and back on again also. The WiFi shows up and it has full bars. I have heard many people are having this problem, but does anyone know how to fix it so I can get back on the WiFi? (I know it's not my WiFi connection. I am on my laptop right now with no problem)

This just happened to me, and here was the solution to my problem.
Turn off your router for several minutes, and turn off your Touch.
Turn on your router and let it power up fully.
Now, turn on your Touch and try to access the wireless signal as you had before the update. You should be able to access Safari, YouTube, and other sites.

Airport does not connect fast enough after sleep on Mac OS X Snow Leopard

Ever since installing Snow Leopard, I have noticed that my Airport will not connect fast enough when I am waking from sleep. I sometimes have to wait upwards of 30 seconds after waking from sleep so Airport can connect and I can begin using the Internet. I notice that Airport says it is connected, but when I launch Safari, I get the "Not Connected to Internet" error message. I have tried removing the com.apple.airport.preferences.plist file to no avail. I have also tried Archiving and Installing and the issue is still there. Any ideas or fixes? Thanks.

Those seem to happen a lot when you have stealth mode enabled (Security System Prefs, Firewall, Advanced). For me, they all seemed to be innocuous so I turned it off. I don't think this would affect your connectivity, though.
You should also see it negotiate the connection. Is there anything that looks like it is repeating or retrying or other disconcerting messages? Here's an example of mine waking:1/5/10 8:27:36 PM kernel Wake reason = USB1
1/5/10 8:27:36 PM kernel System Wake
1/5/10 8:27:36 PM kernel vmmon: powerStateDidChange flags=0x82 (state 4)
1/5/10 8:27:36 PM kernel Previous Sleep Cause: 0
1/5/10 8:27:36 PM kernel USB (UHCI):Port 2 on bus 0x1d has remote wakeup from some device
1/5/10 8:27:36 PM kernel EIR is not supported.
1/5/10 8:27:37 PM kernel en1: 802.11d country code set to 'US'.
1/5/10 8:27:37 PM kernel en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 149 153 157 161 165
1/5/10 8:27:38 PM kernel AirPort: Link Up on en1
1/5/10 8:27:38 PM kernel AirPort: RSN handshake complete on en1
1/5/10 8:27:38 PM configd[14] network configuration changed.

Internet not connected - but AirPort is

My Airport, Airport Settings, and ISP are all green in my Network Diagonstics, but my Newtwork Settings is yellow and my Internet and Sever are red. It says in my Network that I have a Self-Assigned IP and "will not be able to connect to the Internet" I've tried EVERYTHING to make my internet work, I've tried deleting my Network's password in my Keychain Access, changing the DHCP to my iPhone's Network IPv4 (it works on my iPhone fine), putting in 8.8.8.8 and 8.8.4.4 into the DNS, deleting any proxies, restarting my computer after turning my Airport off and then restarting my compurt after turning it on, restarting my router, deleting the files com.apple.airport.preferences.plist, com.apple.network.identification.plist, and NeworkInterfaces.plist, turning my firewall off to accept all incoming connections, trying the "Assist Me..." and "Dianostics...", trying "Repair Disk Permissions' through the Disk Utility, turning on Internet Sharing then turning it off.
I can't think of anything else to do. PLEASE help me. (Also, this has happened to me before and doing the keychain access thing DID work, but it won't this time)
(And I accidently posted this in the Desktop threads, sorry!)

Head to Network and on Locations > Edit Location and add a new one. "+"
BTW adding Googles DNS into it isn't going to help and depending where the DNS server is (like far way from your ISP server) could make your Akamai based downloads (from Apple) much slower.
The New Location should clear everything, now just set your Wifi to conenct in the upper right hand corner and save into KeyChain when it asks.
If you have a modem your going to need to power it off/on to get a new DCHP lease from the ISP.
Check your date and time in System Preference is correct and updating via Apple's time server for your area or your DCHP lease will fail.

Internet not connected - but AiPort is

My Airport, airport Settins, and ISP are all green in my Newtork Diagonstics, but my Newtwork Settings is yellow and my Internet and Sever are red. It says in my Network that I have a Self-Assigned IP and "will not be able to connect to the Internet" I've tried EVERYTHING to make my internet work, I've tried deleting my Network's password in my Keychain Access, changing the DHCP to my iPhone's Network IPv4 (it works on my iPhone fine), putting in 8.8.8.8 and 8.8.4.4 into the DNS, deleting any proxies, restarting my computer after turning my Airport off and then restarting my compurt after turning it on, restarting my router, deleting the files com.apple.airport.preferences.plist, com.apple.network.identification.plist, and NeworkInterfaces.plist, turning my firewall off to accept all incoming connections, trying the "Assist Me..." and "Dianostics...", trying "Repair Disk Permissions' through the Disk Utility, turning on Internet Sharing then turning it off. I can't think of anything else to do. PLEASE help me. (Also, this has happened to me before and doing the keychain access thing DID work, but it won't this time)

a Self-Assigned IP and "will not be able to connect to the Internet"
That is a failure to connect to the Router using your current settings. Everyone uses a self-assigned IP Address (for a moment when they first start up) but it is quickly replaced by a good local IP Address once you contact the Router and get a good local IP Address using DHCP.
System preferences > Network > WiFi/Airport
use the ( Asssist me ) button, but choose ( Assistant ) to set up again from scratch, using a new name for "Location" (not "Automatic"). Be sure to close the window and Save Changes when you are done setting up.

Attendant Console could not connect to server after upgrade

All,
I upgraded a BE CUCM/Unity Connection server from 6.1.2.1000-13 to 6.1.4.2190-3 and after the upgrade, the AC client software could not connect to the CUCM server. After checking all of the obvious things and rebooting the computer on which AC client was running, I finally figured out a workaround. The CUCM server was configured with a host name of UCM1 and a domain of localdomain. The AC clients were pointing to UCM1. If I added a record in the client's hosts file (%WINDIR%\SYSTEM32\DRIVERS\ETC\hosts) which pointed UCM1.localdomain to the IP address of the CUCM server and then pointed the AC client to UCM1.localdomain, everything worked great. I'm just wondering why this happened. The client must pass the name of the server in the payload (rather than simply using the name to resolve to an IP address). So why, all of a sudden, does the server care about the FQDN? Just curious if anybody knows or has run into this same issue.
Regards,
Steven

Hazel,
Any chance you could send me a Wireshark capture of the traffic coming to/from one of the affected client PCs during the login process? Also, please include any log files in the client's AC application folder (or sub-folders) as well as event log data from the system and application event log for the timeframe spanning slightly before and after the login attempt.
Also before doing any of this please clear the DNS and ARP cache of the client PC:
ipconfig /flushdns
arp -d *
Regards,
Steven

Photosmart 6525 Internet Not Connected about 3 minutes after turning on

Similar Messages

Maybe you are looking for