Photosmart 7150 - Prints left side of page only

I have used my Photosmart 7150 for years. All of a sudden, prior to printing I get a "PAPER SIZE MISMATCH" message telling me to pull the photo slider out. The photo slider is all the way out. I press the "RESUME" button, and only the left side of the page prints. Does anyone know how to correct this?

There may be more than one issue here. The photo tray issue may contribute to both issues. Try this link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01839973&lc=en&dlc=en&cc=us&product=1153754&lan...
See if this helps one or both issues.
Our advice is strictly limited to the question(s) asked and is based on the information provided to us. HP does not assume any responsibility or liability for the advice given.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Similar Messages

How to fix printer settings-only prints left side of page?

how do i straighten out printer settings as printer only prints left side of page.i have a 2008 imac. thank you

Have you contacted Canon Support?

C4180 printing problem- only prints left side of page

i have fixed this before but i don't know how, after un plugging, rebooting multiple times it would just start to work again, not this time

Have you contacted Canon Support?

Web pages are printed incorrectly, i.e. left side of page in p.1, right side on page 2. This started recently. Correct printer is identified.

Firefox recently updated. Now, printing a web page results in left side printed on p.1, right side on page 2. Using the same Canon D9000 printer. Selecting horizontal format causes the left side of page to be printed 1/2 size on 1/4 page! Printing same web page with IE is OK. Printing from MS`Word is OK.

All web pages? Or just some? Example of a page where that happens?
Do those pages have '''Frames'''? <br />IOW, is the '''Print Frames''' section in the print dialog available (not greyed-out) for selecting '''''Each frame separately'''''?
If that isn't a Frames issue, my advice is to do the '''reset''' described here. <br />
http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer <br />Make sure you reset all the prefs for that particular printer.

How Can I Achieve Sliding Out Social Icons on Left side of Page?

I have been trying to find free plugins, but ways to work with the various states in Muse, but am having trouble deciding which was is best. Here is an example of what I mean,,, but all are only for Wordpress.
http://smartcatdesign.net/sliding-social-icons-free-wordpress-plugin/

ok try and explain this best as I can....
ok,,, I used a set PSD document size first to make sure all Active Icons were same size....(screen shot 1)
2) Then after I had every icon I needed,, I saved each one as for instance facebook_active for site purposed,, but leave this document open to simply bring in the icon to next file
3) Next I opened a new PSD document and set size to 153px x 47px (was size I was looking for, which would be my hover state in the end)
4) If you look at my layers closely you will see kinda what I did,,, just added new layer and went little passed left edge of each icon with its own color: facebook=blue youtube=red.....
5) Then I centered text to make sure all text would be in the same spot and look good.
6) then when u have my 2nd screen shot,,, save that as facebook_hover
7) Muse time,,,,, go to muse and make rectangle of the size of your hover size (my case was 153px X 47px) and place with left edge alligned to left side of page.
go to fill,,, and image icon to upload your active icon first and make sure is original size and set to far middle left......then make sure your color fill is transparent,,, nothing.....
8) Then go to states and rollover and then go back to fill and upload the hover image and do original size,, should fill rectangle exactly

Is there a ruler on the left side of Pages?, Is there a ruler on the left side of Pages?

I am trying to change an AppleWorks drawing file into a Pages file. Appleworks has a ruler at the top and on the left side. I only see a ruler at the top in Pages.

I only see a ruler at the top in Pages.
For the iPad this is correct. And on iPod/iPhone there is none, you can only temporary show the ruler, but as soon as you start editing, it will be gone.

Why does ipad cut off left side of page?

What do you do to see left side of page which is cut off?

If you have Zoom enabled, that could cut off the left side of the screen, but everything would appear very large on the screen as well.
Settings>General>Accessibility>Zoom>On. You want to turn it off. Double tap three fingers and drag to change Zoom. You can see the instructions below.
If that's not the problem - try rebooting the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Maverick and Photosmart 7150 printer problems

Updated to Maverick os x and now my hp photosmart 7150 printer won't work .. can I update .. and if so how do I update my printer driver for maverick?

Hello
I believe the HP Photosmart 7150 was released back around 2002.
Which version of OSX did you upgrade from ? Were you running previous OS X 10.6 when you upgraded to new 10.9 ?
Unfortunately, the HP Photosmart 7150 has not been supported for some time now with the last few releases of OS X.
If this reply helped you, please say thanks by clicking the blue Kudos star.
I am an HP employee

Printing with In Design CS4 only print left side,why?

How do I print a document in Design (CS4). I have a 11x17 document (landscape) and when I send it to print it only print the left side (letter).   It is a newsletter so one 11x17 comprises 2 letter size pages. I want to print them all but page by page by letter size only so we can proof read.
I noticed that in the preview you can see only the half left side is highligthed for printing.   I tried to play around and Icouldn't.
Do you know why?.
Also when you send a document for the printing services, do you send in in 11x17 size? or letter size?
It is a 6 page newsletter.   One 11x17 both side = 4 pages and One insert 8.5 x11 both sides = 2 pages
Thanks,

If your page is set up as 11 x 17 and you try to print to letter-size paper yoou'll need to enable tiling to get both sides.
The correct way to set this file up is as lettersize facing pages (and they should be set in consecutive order, as the reader will see them). Imposition for printing is done at print time. If you are required to provide the imposed spreads (and no printer worth their salt should be asking for this), you can place the pages from the original file into a new 11 x 17 document in the correct order. Your insert will probably also print as 11 x 17, just half as many sheets with two copies per sheet, then get cut apart and inserted.

Printing outlines: text all on left side of page

I'm using Keynote 3, and having problems with printing outlines. All of the text is squished onto the left side of the page as if the page were laid out with columns. What should be 4 pages of outline (as it was in Keynote 2), is now about 10 pages, but with the right side of each page blank. Has anyone seen this, and more importantly, does anyone have any ideas how to fix it?
Katrina

Well, I figured it out... I had to change the view
from "Navigator" to "Outline" and move the divider
between the outline and the slide as far to the right
as it would go. Then, when I went to print the
outline the text filled the page. This did not
happen in Keynote 2.
Katrina
Thank you, thank you, thank you, Katrina! I was completely mystified until I read your solution! It worked like a charm.
Lily

Printed documents are missing letters on left side of page

Having problems with a printed document. The left side of the document is missing the first few letters of each line.

The option appears when you choose PRINT. You get a window with a preview of the document at the right and options on the left. Take a good look, the name might be slightly different. The options are important, get to know them.

Hp photosmart 6510 printing and photocopying blank pages even after putting in new ink cardridges

Hi there, can anyone help?
My photosmart 6510 has recently started printing and photocopying blank pages. The ink cardridges were low and I have replaced them with new ones. I have cleaned the printer head and the test comes out in colour.
I have no idea what to do other than buy a new one !
Any advice appreciated.

Hi @TG13,
I'd like to help. Please begin with the steps in the following document; Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Deskjet Ink Advantage an... < this applies to the 6510, and 6515 too.
If you complete, or have already completed all of the steps in the document above and the issue continues, my own personal recommendation, not one of HPs, is to use the solution offered in the following video. I only suggest doing this if the printer is out of warranty; How to fix a HP Printer, not printing black ink and missing colours
Based on the comments, it looks like this will help
King_Zog wrote:
I tried most of the suggestions in this thread, but stopped short of disassembling the print head. Nothing worked until I saw the video referenced in Sunshyn2005's message. That did work, but not on my first try. For the second attempt, I left the wet paper towels in place for a couple of hours to really soak the print heads. That did the trick.
So, thank you Sunshyn2005, for pointing me to the solution. - Source
Although the printer might be out of warranty, if the issue persists, HP may be able to offer you something. Maybe they can offer you a discount on an alternate model. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
If this resolves the issue, please let me know so we can help others who may be experiencing the same issue.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP Laserjet 4P has a 1" toner stain that runs down the left side of page.(front and back)

Hello all,
This is my first post here and I hope someone can help me.
We have a HP Laserjet 4P that we have used for a few years and recently have had a problem of a 1" toner stain that runs down the left side of the printed page(both front and back side). I have replaced the cartride and cleaned everything I know to clean. When I remove the cartridge, there is a little pile of toner on the left side just in front of the horizontal silver bar that is behind the roller. I have cleaned it up several times. Each time I try to print, The toner stain appears on the printed page again and leaves a new pile of toner in the same place.
Does anyone have any experience with this problem? I am not sure if it is a worn part or a maintenance issue.
Thanks in advance for any help.
Fish

Hi ProspeorusCE,
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

MX432 All-in-one printer: left side of printed subject is being cut off when using 'normal' layout.

Because 'normal' and 'fit to page' layouts cut off left side of printed material I'm using 'borderless' layout but that doesn't give me the paper size option I need. Any hints on how to save the left side of paper and how to change paper size in borderless layout. Any hints in print preview wherein I can print just 'one or two' of multiple pages without having to return to the set-up page?

Hi vitaminsg,
You can set it so that "Fit to Page" printing is the default setting. To do this, use the following steps:
1. Click Start.
2. Click Control Panel.
3. Click Printers and other Hardware.
4. Click Printers and Faxes.
5. Right click the PIXMA MX432 and click Printing Preferences.
6. Click the Page Setup Tab.
7. Select Fit to Page under Page Layout, then press OK.
This should now be the default setting for all programs.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Web page content is squeezed onto left side of page.

firefox worked great until I enlarged the fonts so I could read the words... sorry I am older and need larger text.
Ever since I get weird results on some websites.
Example: www.ibfx.com the entire right side (under the header and taps) of the page is black. can see nothing. Most details are squeezed onto the left side of the page. Links are still active but only 1/2 of the link is visible.
The page works just fine with Inet explorer but I want to use Firefox. I have tried deleting firefox and reloading it but that did not help. Also do not want to lose my saved links and bookmarks. Can you help? My email is [email protected]
Thanks, RobertJ.

Hi Cor-el... Thanks for your ideas .... however I still have the problem. I removed all cookies and cleared the cache. No help. It appears that the page is crowed over to the left side, as if force-fitting into a frame.
Also tried https but it made no apparent difference.
Have also run Ad-Aware and MalwareBytes... no problems there.
Ran a anti-virus check (Microsoft Essentials) that showed no problem.
Checked out the page on another browser (Chrome) and no problem there.
I have added a screenshot of the problem. It is a PNG file made with Win7 snipping tool. Maybe that will help? I have reduced that image so as to include the entire space.
Certainly appreciate your assistance. Any other ideas?
RobertJ.

Photosmart 7150 - Prints left side of page only

Similar Messages

Maybe you are looking for