Photosmart 7350 assert error

When I turn on my Photosmart 7350 it displays "starting up" for a second, then it displays "Assert Error C0140701" and the print button flashes. What could be wrong?

Yo tambien estoy con el mismo problema, veo que hace un buen tiempo posteaste esto, será que pudiste solucionarlo? Estaria bueno si me das una ayuda de ser así.
Slds

Similar Messages

Photosmart 7350 Photo Printing Problems

When I print a photo with my Photosmart 7350, it would stop printing after 2/3 of the photo was done. I uninstalled the printer, then reinstalled, and now the whole photo will print, but where it used to stop, the quality of the print drops significantly. It's always in the same spot, no matter the print quality selected.
I'm using Win XP, SP3 and a USB connection. I get no error messages of any kind.
Any suggestions?
Message Edited by mandalore84 on 03-08-2009 07:57 AM

Yes, I am having the same problem and also all of the other problems reported. One printer head has already been replaced and another is on its way. Not to mention the catridges (black) that I wasted in the process. When it prints, the quality is superb. It is just failing too often with less than six months of operation.

Serious printing problem - HP Photosmart 7350 / Mac OS 10.6.6

Hello to all helpers!
Recently, I encountered a serious problem with my printer, an HP Photosmart 7350. This printer has always worked with my setup over an Airport Express network. However, it suddenly stopped working mid-job last weekend after updating to Mac OS 10.6.6, and I have not found any solutions. The printer has power, plenty of ink and paper, and appears to be connected to the computer, but when a job is sent to it, it tries to initiate printing but it doesn't, and after a few minutes the printer queue pauses itself. The printer will print a test page from itself, but it will not print one sent from the computer.
I've tried many conventional solutions, including:
-deleting the original job and resending it to the printer
-restarting the printer
-restarting the computer
-unplugging the USB cable and power cable and plugging them back in
-replacing the USB cable with a different one
-connecting the printer directly to the computer instead of the Airport Express
-removing and reinstalling the printer driver (Gutenprint 5.2.3)
-repairing disk permissions
-resetting the print system and reinstalling the printer driver
I am completely confused about what happened, but I'm guessing it is an incompatibility issue related to the OS update. Any help would be greatly appreciated. Thank you!

So I have tried the foregoing suggestions and reinstalled with Gutenprint 5.2.6, but I still have the same errors popping up in console, suggesting incompatibility.
Is there any hope for this printer anymore or am I going to Office Depot later today?
1/17/11 11:25:12 AM updatecache[136] Error loading /Library/Printers/hp/photosmart/hpphotosmart.plugin/Contents/MacOS/hpphotosmart: dlopen(/Library/Printers/hp/photosmart/hpphotosmart.plugin/Contents/MacOS/hpphotosmart, 262): no suitable image found. Did find:
/Library/Printers/hp/photosmart/hpphotosmart.plugin/Contents/MacOS/hpphotosmart: mach-o, but wrong architecture
1/17/11 11:25:12 AM [0x0-0x10010].com.apple.print.add[134] 2011-01-17 11:25:12.481 updatecache[136:307] Error loading /Library/Printers/hp/photosmart/hpphotosmart.plugin/Contents/MacOS/hpphotosmart: dlopen(/Library/Printers/hp/photosmart/hpphotosmart.plugin/Contents/MacOS/hpphotosmart, 262): no suitable image found. Did find:
1/17/11 11:25:12 AM [0x0-0x10010].com.apple.print.add[134] /Library/Printers/hp/photosmart/hpphotosmart.plugin/Contents/MacOS/hpphotosmart: mach-o, but wrong architecture
1/17/11 11:25:12 AM updatecache[136] Cannot find function pointer HPPMPluginFactory for factory 0F0BC574-86C5-11D5-AB62-003065B63748 in CFBundle/CFPlugIn 0x4cb250 </Library/Printers/hp/photosmart/hp_photosmart.plugin> (bundle, not loaded)
1/17/11 11:25:12 AM [0x0-0x10010].com.apple.print.add[134] 2011-01-17 11:25:12.485 updatecache[136:307] Cannot find function pointer HPPMPluginFactory for factory 0F0BC574-86C5-11D5-AB62-003065B63748 in CFBundle/CFPlugIn 0x4cb250 </Library/Printers/hp/photosmart/hp_photosmart.plugin> (bundle, not loaded)
1/17/11 11:25:15 AM AddPrinter[134] Error loading /Library/Printers/hp/photosmart/hpphotosmart.plugin/Contents/MacOS/hpphotosmart: dlopen(/Library/Printers/hp/photosmart/hpphotosmart.plugin/Contents/MacOS/hpphotosmart, 262): no suitable image found. Did find:
/Library/Printers/hp/photosmart/hpphotosmart.plugin/Contents/MacOS/hpphotosmart: mach-o, but wrong architecture
1/17/11 11:25:15 AM AddPrinter[134] Cannot find function pointer HPPMPluginFactory for factory 0F0BC574-86C5-11D5-AB62-003065B63748 in CFBundle/CFPlugIn 0x146f0160 </Library/Printers/hp/photosmart/hp_photosmart.plugin> (bundle, not loaded)
1/17/11 11:25:17 AM AddPrinter[134] There are no drivers posted for 'MANUFACTURER:hp;MODEL:photosmart 7350'.

Can't print to HP Photosmart C5180. getting error mssg that says, "Because a USB device was drawing too much power from your computer, one or more of our USB devices have been disabled." Never seen this before. How do i fix this?

can't print to HP Photosmart C5180. getting error mssg that says, "Because a USB device was drawing too much power from your computer, one or more of our USB devices have been disabled." Never seen this before. How do i fix this?

Get a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Cc got assertion error, when compiling emacs-23.3

I got an assertion error with cc as follows, when compiling emacs-23.3.
It compiles fine without the "-O" option.
I can provide a CPP processed file which reproduces it.
;; I could not find a place to report bugs, and I put it here.
;; Sorry if it is not an appropriate place.
% cc -V
cc: Sun C 5.12 SunOS_i386 2011/11/16
% cc -c -Demacs -DHAVE_CONFIG_H -I. -I/work/emacs/emacs-23.3/src -I/usr/dt/include -g -O font.c
"font.c", line 185: warning: integer overflow detected: op "<<"
"font.c", line 197: warning: integer overflow detected: op "<<"
"font.c", line 215: warning: integer overflow detected: op "<<"
"font.c", line 2995: warning: integer overflow detected: op "<<"
"font.c", line 3422: warning: integer overflow detected: op "<<"
"font.c", line 3920: warning: assignment type mismatch:
pointer to char "=" pointer to unsigned char
"font.c", line 3945: warning: assignment type mismatch:
pointer to char "=" pointer to unsigned char
"font.c", line 4026: warning: integer overflow detected: op "<<"
assertion failed in function pg_first_pass_do_block_rec() @ post_gen.c:3758
assert(blk_sp_offset_(nextb) == (current_offset + get_prologue_size() + BITS2BYTES(be_cur_local_size)))
cc: ube failed for font.c

Got it ...
Reduced testcase:
% cat c.c
enum Lisp_Type
Lisp_Int0 = 0,
Lisp_Float = 7,
struct Lisp_Float
union
double data;
struct Lisp_Float *chain;
} u;
struct Lisp_Vector
unsigned int size;
struct Lisp_Vector *next;
int contents[1];
int
font_unparse_xlfd (font, pixel_size, name, nbytes)
int font;
int pixel_size;
char *name;
int nbytes;
char *f[21];
int val;
int i, j, len = 0;
val = ( ( struct Lisp_Vector * ) ( ( unsigned int ) ( ( ( font ) ) & ( ( ( ( int ) 1 ) << ( 32 - 3 ) ) - 1 ) ) ) ) -> contents [ 5 ];
if ( ( ( ( enum Lisp_Type ) ( ( ( unsigned int ) ( ( val ) ) ) >> ( 32 - 3 ) ) ) == Lisp_Float ))
i = ( ( ( void ) 0 , ( struct Lisp_Float * ) ( ( unsigned int ) ( ( val ) & ( ( ( ( int ) 1 ) << ( 32 - 3 ) ) - 1 ) ) ) ) -> u . data + 0 ) * 10;
f[2] = __builtin_alloca ( 12 );
else
f[2] = "*-*", len += 4;
% cc -g -O c.c -V
cc: Sun C 5.12 SunOS_i386 2011/11/16
acomp: Sun C 5.12 SunOS_i386 2011/11/16
"c.c", line 41: warning: implicit function declaration: __builtin_alloca
"c.c", line 41: warning: improper pointer/integer combination: op "="
iropt: Sun Compiler Common 12.3 SunOS_i386 2011/11/16
ir2hf: Sun Compiler Common 12.3 SunOS_i386 2011/11/16
ube: Sun Compiler Common 12.3 SunOS_i386 2011/11/16
assertion failed in function pg_first_pass_do_block_rec() @ post_gen.c:3758
assert(blk_sp_offset_(nextb) == (current_offset + get_prologue_size() + BITS2BYTES(be_cur_local_size)))
cc: ube failed for c.c
Bug 7167252 filed. If we find a work-around I'll post it.

Can't install hp photosmart 7350 series printer on my hp laptop with windows 7 home premium

I am trying to install the HP Photosmart 7350 printer on my HP Laptop (serial number {Removed for privacy}; serial number{Removed for privacy}). The driver was not listed so I searched for a compatible printer. I found the Deskjet 5550 was compatible. I downloaded this driver then followed the directions for installing the alternate device. When I selected the Photosmart 7350, I was give the prompt that this device might be harmful to my hard drive. How can I install this printer safely? I do not have a disc with the printer. Do I need to get one or can you give me an alternative.

I also need a printer driver to connect an HP 7350 to a Windows 8.1 laptop.

HP Photosmart 7350 Printing Issue

I have the hp photosmart 7350 and now when I want to print something using 8.5 x 11 paper, the image or document is cut off on all sides, mostly on the bottom (vertical) or right side (horizontal) I checked and the section where it shows the margins (page setup) is greyed out so I cant change the settings. I tried the troubleshooting ( deskjet 990c driver, 7350 driver, and some other steps) nothing works. Can anyone help me with this, or do I need a new printer ?

The troubleshooting steps in the document here may help resolve black not printing on your Photosmart 6525 printer. If the steps there do not resolve the issue I would suggest you call HP Support as described in the post here, even if the printer is out of warranty.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Photosmart 7350

HP Photosmart 7350 will not print color with my new MAC OSX 10.9.4. Tried loading printer driver but get the message that Power PC applications no longer supported. Does this mean I need to get a new printer to work with my MAC.

Hi @catwoman58,
Welcome to the HP Forums!
I understand that your HP Photosmart 7350, will not print in color on your Mac OS X 10.9.4. I am happy to help you with your printing issue!
According to the drivers website, found at this website, HP Photosmart 7350 Printer Drivers. There are only drivers available up to Mac OS X 10.4.
I would recommend upgrading the printer to one that has drivers available for Mac OS X 10.9.4. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this information helps, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Labview RT 14.0 Scheduler Assert%3A __1276 Scheduler Assertion Error%3A 80000004

We have a multithreaded CVI app (~20 threads) running on a PXIe-8135 (4 CPUs). The application never gets done starting all the threads before blue-screening with the following error:
Scheduler Asser: __1276
Scheduler Assertion Error: 80000004
Interrupt Disabled. Scheduler Enabled. ....
More details:
System
Chassis 1 PXIe-1085:
PXIe-8135 Controller
PXI-6704 (7 of them), initialize properly, thread runs successfully until blue screen
PXI-8431/8 (8 of these, total of 64 RS422 channels, about 40 being used currently for test), it is during the starting of these threads (one for each board) that it blue screens
PXIe-8374 (for using Chassis 2 as an extension of Chassis 1)
Chassis 2 PXIe-1075:
PXI-8370 (connected to PXIe-8374)
PXI-6528 (1) threads run fine
PXI-6529 (4) threads run fine
NI-8234 (4) not used currently
The scheduler error happens at different times, but always during the starting of the RS422 threads. Can anybody give a hint as to why the Scheduler Assertion Error occurs, and particularly this specific error?

Hi,
I have a couple of questions for you.
1) Has this application ever worked?
2) Can you attempt to replicate this issue with less RS422 channels? Basically, is there a maximum number of RS422 channels where the error is received, or if you had only 1 channel being used, would the error still happen?
3) Do you have another PXIe controller that you can try?
4) Did anything change in your system that would have caused the error?
Kevin S
Applications Engineer
National Instruments

I get a assertion error when trying to up load adobe lightroom have followed the instruction on the adobe site to fix the problem

i get a assertion error when trying to up load ,lightroom have follow the instructions on the adobe site and it still does not work
and ideas on how to fix the problem
tk
bigguy1965

Hi,
Can you Please provide Configuration of your XP, Win7 Machine [How to post a screenshot in the forum]?
To check if Windows 7 Service Pack is already installed, follow the below steps:
Click the Start button , right-click Computer, and then click Properties.
The basic information about your computer page will open.
To check if Windows XP Service Pack is already installed, follow the below steps:
Click the Start button , right-click Computer, and then click Properties.
Click System and Service Pack Information will be listed
Please also attach log [Where do I find the Flash Player installation log on Windows?], [How to share a document] and Share the Current Version of Flash Player goto - [https://helpx.adobe.com/flash-player.html] and click on Check Now button, using about method can you place the screenshot.
Meanwhile you can also try cleaning Application Temporary Data and Try again. [c:/users/username/appdata/local/temp folder - Microsoft Community], Due to some reason the Installer file is getting corrupted which might be blocking Flash Player Installation. After cleanup try using the offline Installer [Installation problems | Flash Player | Windows]
Thanks
Piyush

Muse JS Assert: Error calling selector function:Type error: Object has no method Muse Menu

When exporting html and viewing locally we receive the following error... This error disappears after removing menu from top of page. This error does not occur when viewed on Outdoors360.businesscatalyst.com (our temporary site)
Muse JS Assert: Error calling selector function:Type error: Object has no method Muse Menu
Any ideas??

I fix the problem.
I have carefully reviewed JAVASCRIPT files and I could see that these are not a major influence within the site, only are reference code and utilities of the same application.
By removing these files nothing has stopped working, I thought I would have some error in the sliders, or opacities, but no, nothing happened.
DELETE IT
FRANCISCO CATALDO DISEÑADOR GRÁFICO

Assert error in __memp_fget under OS X/Linux using TXN_SNAPSHOT

Hi all,
Hopefully this is a good place to file a bug report. I've been hunting down the cause of a core dump for a couple of weeks and have finally reduced it to a [small example|http://home.comcast.net/~jonathanmeredith/bugrpt.tar.gz] (I couldn't find a way to attach it to the message).
README from the tarball:
The code sample enclosed causes BDB to die with an assertion error. This is the minimal
code that causes the bug, stripped down from an Erlang port driver. It may look strange
and ugly, but it only exists to reproduce the bug.
To reproduce expand the tarball into a directory containing the BDB tarball and run make.
It will compile the library and test code then start looping through the test code. The
assertion usually occurs anywhere between 1 and 50 iterations through the test code.
The bug occurs under Mac OS X 10.5.7 (9J61) running on an 8 core [email protected] mac pro,
8Gb RAM, compiled with i686-apple-darwin9-gcc-4.2.1 and under Debianl Lenny on
4 core Xeon 5160 @ 3.00GHz, 8Gb RAM, libc 2.7-18, gcc (Debian 4.3.2-1.1) 4.3.2.
Expected output:
assert failure: ../dist/../mp/mp_fget.c/257: "bhp != NULL"
0 bugrpt 0x001284c1 __os_stack + 38
1 bugrpt 0x00124bce __os_abort + 17
2 bugrpt 0x000ba786 __db_assert + 66
3 bugrpt 0x0010f365 __memp_fget + 2274
4 bugrpt 0x0000acff __bamc_rget + 4421
5 bugrpt 0x0000923f __bam_bulk_duplicates + 5534
6 bugrpt 0x000b229d __dbc_put + 4515
7 bugrpt 0x000a0d9f __db_put + 639
8 bugrpt 0x000bf7c1 __db_put_pp + 606
9 bugrpt 0x000023bf start + 723
10 bugrpt 0x00002492 bug200 + 70
11 libSystem.B.dylib 0x91e37155 pthreadstart + 321
12 libSystem.B.dylib 0x91e37012 thread_start + 34
./loopbug: line 20: 52562 Abort trap ../bugrpt
Removing the TXN_SNAPSHOT options makes the bug go away. So does changing the size of the 'put' value.
Reducing the number of the THREADS #define increases the number of iterations required to hit the assert.
On the 4-core Debian box it took 377 reps with THREADS=2

Hi Jon,
Thanks for a great test case, this made our job a little easier! If you could please send me an email to: michael dot brey at oracle dot com, I will respond to you with a patch of this issue for 4.7.
Regards,
Mike Brey, Oracle Berkeley DB

Assertion Error: Cannot Load Dyamically Generated Stub

Hi Everyone,
I am getting an Assertion Error in Weblogic 9.2, the root cause being a ClassNotFoundException for a dynamically-generated WL Stub for an Oracle JDBC wrapper. The partial stacktrace is as follows:
ASSERTION FAILED *****[Could not find dynamically generated class: 'weblogic.jdbc.rmi.internal.ResultSetImpl_weblogic_jdbc_wrapper_ResultSet_oracle_jdbc_driver_OracleResultSetImpl_920_WLStub']
Caused by: java.lang.ClassNotFoundException: weblogic.jdbc.rmi.internal.ResultSetImpl_weblogic_jdbc_wrapper_ResultSet_oracle_jdbc_driver_OracleResultSetImpl_920_WLStub
So...not sure if the RMI stub is never generated because/or there is something dorked up in my classpath re: Oracle. Any insight would be awesome
Thanks!
--John

Hi yoster,
I have the same problem, but I couldn't solve the problem by removing a war file like you did.
It's nearly the same stacktrace:
ASSERTION FAILED *****[ Could not find dynamically generated class: 'weblogic.jdbc.rmi.internal.StatementImpl_weblogic_jdbc_wrapper_Statement_oracle_jdbc_driver_T4CStatement_921_WLStub' ].
java.lang.ClassNotFoundException: weblogic.jdbc.rmi.internal.StatementImpl_weblogic_jdbc_wrapper_Statement_oracle_jdbc_driver_T4CStatement_921_WLStub
My database is also oracle.
Do you have other ideas that could sold this ?
I hope you do, because I'm stuck ... don't know where to look anymore :(
Toni

Assertion Error in WL 4.5.1

Hi,
We are running WL 4.5.1 with SP 11 on NT and Oracle 8i as the database.
After the server has been running for quite a while and there is fair amount
of activity, the server throws the following exception. Any ideas about what
this exception means or why it is thrown?
Mon Sep 25 18:52:15 EDT 2000:<E> <T3Services>
java.rmi.RemoteException: --------------- nested within: ------------------
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Assertion
violated ]
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Error.<init>(Error.java:53)
at weblogic.utils.NestedError.<init>(NestedError.java:15)
at weblogic.utils.AssertionError.<init>(AssertionError.java:49)
at weblogic.utils.Debug.assert(Compiled Code)
at weblogic.ejb.internal.LRUCache.remove(Compiled Code)
at weblogic.ejb.internal.StatefulEJBCache.unbind(Compiled Code)
at weblogic.ejb.internal.BaseEJBContext.afterCompletion(Compiled Code)
at weblogic.ejb.internal.EntityEJBContext.afterCompletion(Compiled Code)
at weblogic.ejb.internal.StatefulEJBObject.getContextForInvoke(Compiled
Code)
at weblogic.ejb.internal.BaseEJBObject.preInvoke(Compiled Code)
at sync.server.system.SystemSessionBeanEOImpl.getSystemSessionID(Compiled
Code)
at sync.server.eventrouter.SessionHandlerServiceBean.processEvent(Compiled
Code)
at
sync.server.eventrouter.SessionHandlerServiceBeanEOImpl.processEvent(Compile
d Code)
at
sync.server.eventrouter.SessionHandlerServiceBeanEOImpl_ServiceStub.processE
vent(Compiled Code)
at sync.server.gateway.ServerGatewayBean.handleSystemMessage(Compiled Code)
at sync.server.gateway.ServerGatewayBeanEOImpl.handleSystemMessage(Compiled
Code)
at
sync.server.gateway.ServerGatewayBeanEOImpl_ServiceStub.handleSystemMessage(
Compiled Code)
at sync.server.util.SystemMessageThread.disconnect(Compiled Code)
at sync.server.util.SystemMessageThread.run(Compiled Code)
at sync.util.ThreadPoolRunner.run(Compiled Code)
at java.lang.Thread.run(Compiled Code)
; nested exception is:
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Assertion
violated ]
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.io.IOException.<init>(Compiled Code)
at java.rmi.RemoteException.<init>(Compiled Code)
at weblogic.ejb.internal.BaseEJBObject.postInvoke(Compiled Code)
at sync.server.system.SystemSessionBeanEOImpl.getSystemSessionID(Compiled
Code)
at sync.server.eventrouter.SessionHandlerServiceBean.processEvent(Compiled
Code)
at
sync.server.eventrouter.SessionHandlerServiceBeanEOImpl.processEvent(Compile
d Code)
at
sync.server.eventrouter.SessionHandlerServiceBeanEOImpl_ServiceStub.processE
vent(Compiled Code)
at sync.server.gateway.ServerGatewayBean.handleSystemMessage(Compiled Code)
at sync.server.gateway.ServerGatewayBeanEOImpl.handleSystemMessage(Compiled
Code)
at
sync.server.gateway.ServerGatewayBeanEOImpl_ServiceStub.handleSystemMessage(
Compiled Code)
at sync.server.util.SystemMessageThread.disconnect(Compiled Code)
at sync.server.util.SystemMessageThread.run(Compiled Code)
at sync.util.ThreadPoolRunner.run(Compiled Code)
at java.lang.Thread.run(Compiled Code)

This turned out to be our fault - we were told that the servers are running
sp11 but when we later checked using the admin tool, we found that wasn't
the case on this machine. sp11 was in the classpath but the directory was
wrong. I guess that's the downside to the way WL SPs work, the jvm doesn't
tell you when you have an invalid filename in the classpath so you don't
know that you are not actually running with the sp.
On the thread issue you mention, the traceback below originates in a startup
class which does manage its own threads. Isn't this a valid way to invoke
beans in weblogic?
"Rob Woollen" <[email protected]> wrote in message
news:[email protected]...
It's hard to say why you're seeing this assertion error. I would
suggest that you contact [email protected]
However, I can see that you are using your own threads within the
WebLogic server. This is not allowed and might be the cause of your
problems.
-- Rob
SG wrote:
Hi,
We are running WL 4.5.1 with SP 11 on NT and Oracle 8i as the database.
After the server has been running for quite a while and there is fair
amount
of activity, the server throws the following exception. Any ideas aboutwhat
this exception means or why it is thrown?
Mon Sep 25 18:52:15 EDT 2000:<E> <T3Services>
java.rmi.RemoteException: --------------- nestedwithin: ------------------
>>
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Assertion
violated ]
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Error.<init>(Error.java:53)
at weblogic.utils.NestedError.<init>(NestedError.java:15)
at weblogic.utils.AssertionError.<init>(AssertionError.java:49)
at weblogic.utils.Debug.assert(Compiled Code)
at weblogic.ejb.internal.LRUCache.remove(Compiled Code)
at weblogic.ejb.internal.StatefulEJBCache.unbind(Compiled Code)
at weblogic.ejb.internal.BaseEJBContext.afterCompletion(Compiled Code)
at weblogic.ejb.internal.EntityEJBContext.afterCompletion(Compiled Code)
at weblogic.ejb.internal.StatefulEJBObject.getContextForInvoke(Compiled
Code)
at weblogic.ejb.internal.BaseEJBObject.preInvoke(Compiled Code)
atsync.server.system.SystemSessionBeanEOImpl.getSystemSessionID(Compiled
Code)
atsync.server.eventrouter.SessionHandlerServiceBean.processEvent(Compiled
Code)
at
sync.server.eventrouter.SessionHandlerServiceBeanEOImpl.processEvent(Compile
d Code)
at
sync.server.eventrouter.SessionHandlerServiceBeanEOImpl_ServiceStub.processE
vent(Compiled Code)
at sync.server.gateway.ServerGatewayBean.handleSystemMessage(CompiledCode)
atsync.server.gateway.ServerGatewayBeanEOImpl.handleSystemMessage(Compiled
Code)
at
sync.server.gateway.ServerGatewayBeanEOImpl_ServiceStub.handleSystemMessage(
Compiled Code)
at sync.server.util.SystemMessageThread.disconnect(Compiled Code)
at sync.server.util.SystemMessageThread.run(Compiled Code)
at sync.util.ThreadPoolRunner.run(Compiled Code)
at java.lang.Thread.run(Compiled Code)
; nested exception is:
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Assertion
violated ]
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.io.IOException.<init>(Compiled Code)
at java.rmi.RemoteException.<init>(Compiled Code)
at weblogic.ejb.internal.BaseEJBObject.postInvoke(Compiled Code)
atsync.server.system.SystemSessionBeanEOImpl.getSystemSessionID(Compiled
Code)
atsync.server.eventrouter.SessionHandlerServiceBean.processEvent(Compiled
Code)
at
sync.server.eventrouter.SessionHandlerServiceBeanEOImpl.processEvent(Compile
d Code)
at
sync.server.eventrouter.SessionHandlerServiceBeanEOImpl_ServiceStub.processE
vent(Compiled Code)
at sync.server.gateway.ServerGatewayBean.handleSystemMessage(CompiledCode)
atsync.server.gateway.ServerGatewayBeanEOImpl.handleSystemMessage(Compiled
Code)
at
sync.server.gateway.ServerGatewayBeanEOImpl_ServiceStub.handleSystemMessage(
Compiled Code)
at sync.server.util.SystemMessageThread.disconnect(Compiled Code)
at sync.server.util.SystemMessageThread.run(Compiled Code)
at sync.util.ThreadPoolRunner.run(Compiled Code)
at java.lang.Thread.run(Compiled Code)

IDCS2, WIN: Assert error reason

Hi Guys,
I got a assert error, "~InstanceList(): 3 outstanding references to UID 172 (Class kTextStoryBoss).", I don't know the reason, do you guys know that?
Thanks,

The number of AddRef() and Release() on that object does not match. This is usually found while closing your document database. Search your code for: IFace1* p = ... Query ... () InterfacePtr<IFace2> p2 ( ... Query ..., IID_...FACE2/UseDefault... ) ... with any of the interfaces on the reported boss class. Methods such as Query...() and Create...() both imply an AddRef, only some of the InterfacePtr<> constructors are meant for those, while others will call AddRef themself. Of course if you use AddRef() yourself, also check those for matching Release(). Dirk

Photosmart 7350 assert error

Similar Messages

Maybe you are looking for