Photosmart 7510 e-all-in-o​ne series/ Printhead problem.

Our photosmart 7510 e-all-in-one series has an message that reads 
Printhead appears to be missing, not detected, or incorrectly installed.
Not able to locate the problem.
Happened right after I changed the ink. 

Hello harry4955,
Welcome to the HP Support Forums!
I see that the HP Photosmart 7510 is displaying an error regarding the print head is missing, stating after changing your ink cartridges.
I was able to locate this HP document: 'Missing or Failed Printhead' or 'Printhead is Missing, Not Detected, or Not Properly Installed' Mes.... I hope it helps, if not you may need to call HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

  • HP Photosmart 7510 e-ALL-IN-O​ne Series pages are blank coming out of the printer

    Printed pages are either blank or streaked.  I have cleaned the print heads (clearning levels 1 & 2) and installed new  HP cartridges but issue persits.  This occours whether I print in blk&white or color.  It may print one or two good pages until it starts to streak badly or produce blank pages.  I then clean the print heads (levels 1 & 2) and sometimes it works again for a couple of pages.

    Hi @lswnantucket,
    Welcome to the HP Forums!
    I see that your printed pages are either blank or streaked with your HP Photosmart 7510, and I am happy to help! 
    Please take a look through this guide, Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Photosmart 7510 e-All-in....
    Hope this guide helps, and have a wonderful day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Issue setting up eFax on HP Photosmart 7510 e-All-in-One "Problem connecting to internet"

    I'm having an issue setting up eFax on my new HP Photosmart 7510 e-All-in-One. I am following the on-screen instructions and receive an error "Problem connecting to internet" when trying to register the account. The ePrint service is working, and I can use the facebook app on the printer so it seems to be connecting to the internet. I am uncertain how to resolve the issue.

    Let's set a static IP address and external DNS for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (on the Network Config Page) for the gateway.
    - Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How do I scan from my hp photosmart plus e-All-In-one B210 series printer

    I have a hp photosmart plus e-All-in-one printer and have tried to scan to my Mac 10.6.8 desktop computer.

    You might need to install software from HP for your printer.

  • Photosmart 7510 e all in one series Printer failure Oxc19a0023

    After having been turned off for several months, I plugged in my 7510e and the following message came on the screen.
    Printer failure, Oxc19a0023, Please turn printer off then on. I did this with no change. I unplugged both electric plus and USB and reconnected. I removed the cartridges and replaced but the same message keeps coming and I cannot get passed this message. If anyone has had this problem and has been able to fix this or if anyone know how to fix this I would really appreciate some help. Thank you.

    Hello @TSLI76 , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are experiencing 0x errors.  I would like to help!
    I would recommend removing the ink cartridges, and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also recommend this document on An 'Ink System Failure' or a '0x ...' Error Message Displays on the HP Printer Control Panel.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Hp Photosmart 7520 e-all-in-o​ne-series (wireless)

    When I go to print documents, I get 10 in Queue.  The blue light indicates that wireless connection has been
    established and you can print.

    JimandJackie
    Welcome to the HP Forum.
    The following applies to Windows OS.
    Know that a recent Update for this printer (mid-August 2014) has resolved some disconnection issues.  If you have not done so for a while, please consider reinstalling the Full Feature Software for your printer.
    Try / Consider:
    Full Feature Software:
    Install Full Feature Software – Photosmart 7520
    Go to  your printer panel:
    Click the ePrint button (top left button) and check for Updates.
    If your printer needs the Updates, it will search them out and download them.
    ==================================================​=========================
    If the issue is only one of the jobs being stuck in the printer queue on the computer, then the following might help:
    The direct approach:
    Open a Windows Explorer (called File Explorer in Windows 8.x)
    Navigate to folder: C:\Windows\System32\spool\PRINTERS **
    Delete any files you find in the PRINTERS folder
    ** When you try to click into the PRINTERS folder, you may see a warning message about permission, Click through and / or enter the Administrator level password to gain access to the folder
    One method to restart the spooler:
    Control Panel > icon view > Administrative Tools > Services >
    Click on Name to sort the column alphabetically  (optional) >
    Scroll down and look for Print spooler > Highlight / Left-Click Print Spooler >
    Click Restart the service
    ==================================================​=========================
    Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Click Accept as Solution when the Answer is a good Fix or Workaround!
    Kind Regards,
    Dragon-Fur

  • Scanning problem with HP Photosmart Wireless e-All-in-One B110 series

    I have installed the captioned printer with my iMac.
    The printing and the copying functions are fine, but the scanning function simply cannot work.
    I have tried scanning photos to the computer using the available software, i.e. iPhoto, Preview and Image Capture. However, none of them worked. The following error message kept popping up:
    The scan cannot be performed because another program has control of the HP imaging device.
    Try the following steps. After each step, try scanning again
    - Restart the program.
    - Close all programs that may be using the device.
    - Reboot the computer.
    I have tried all the steps, but the problem remains.
    I have also tried to use the scanner directly through "Print & Fax" in "System Preferences". Whenever I clicked the "Open Scanner" button, the screen showed the message "Trying to open scanner session..." and then ended with the message "Failed to open a session on the device."
    Could someone help me solve the mystery? Thanks a lot.

    I had the same problem when I had installed the HP software for that printer on a standard user account on the mac.
    After I had uninstalled it and installed on the standard user account and installed the software on an administrator account on the mac, it worked.
    That might help you too...

  • Where are the USB ports on the Photosmart 7520 e-all-in-o​ne series?

    I'm trying to set up my printer, but don't have a CS?DVD drive so I'm using a USB cable. I cannot find the port for the small end of the cable. Any assistance will be greatly appreciated. Why don't HP just have Customer Service online to answer these questions?

    On the back side, next to the power jack. #22 on this diagram
    http://h20565.www2.hp.com/portal/site/hpsc/templat​e.PAGE/public/psi/setupInstallDisplay/?sp4ts.oid=5​...
    there is a usb plug at the front, this is for usb memory stick.
    ======================================================================================
    * I am an HP employee. *
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    ***Click on White “Kudos” STAR to say thanks!***

  • Multifunction printers display menu, photosmart plus e all in one B210 series

    Display menu says there's a memory card error. Unable to use the regular menu or copy. I haven't used a memory card. Followed the instructions in troubleshooting.

    Hi there,
    Try downloading and running the Hardware Diagnostic Utility located here:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/h...
    It can fix a lot on its own and if not give a better idea of what is going on. let us know the results.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • HP Deskjet 3050 All-in-One J610 series printer problem

    I can't get anything to print.  I removed the color cartridge and failed to replace it for several days.  The printer was not used during this time.  After replacing the cartridge,  I tried to print a document and  got a message stating no printer was installed.  I finally uninstalled the printer and reinstalled it.  It shows to be properly installed.  I am still unable to print.  What do I need to do now?

    Hi Gran_6
    I understand you are not able to print and on the computer and you had a message stating that the printer wasn't installed but you installed the printer software and still can't print.
    Try and print a hardware self test from the printer.
    Go to setup, printer report.
    I would download and run the Print and Scan Doctor to fix common printing and scanning
    problems.
    If you require further assistance please provide the following so I can assist you better.
    Did the self test print?
    What were the results of the Print and Scan Doctor? (did it print or scan, any error messages)
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Problem with HP Photosmart 7510

     Everytime I go to print something on my HP Photosmart 7510 printer I have to shut down the printer and restart it to print anything. It's almost like it goes into sleep mode but doesn't  "wake up"

    Hi @jrs67413
    This document contains information about the possible causes of a lost wireless connection, tips for avoiding the issue, tips for maintaining a connection, and troubleshooting steps to help you restore the wireless connection on your printer; Printer Does Not Maintain Wireless Connection.
    In addition to the solutions offered in the document and what you have probably already tried, please ensure the printer is connected directly to a wall outlet and not into a surge protector/ power bar. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
    In this document you will see,
    ISSUE:
    Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
    This is not limited to Laserjet printers.
    It is also good, if you haven't already, to be sure the printer firmware is up to date.  Getting Printer Updates for HP Photosmart 7510 e-All-in-One Printer Series
    I hope this is helpful. 
    I just thought of something else you could try. Use the steps below to disable UPnP in the printers EWS,
    1. Typing the printers assigned IP address into the address bar of Internet Explorer. (you can get this from the report you would have printed while following the steps in the document I posted above)
    2. Click on the Network Tab at the top
    3. Select the Networking option on the left
    4. Click on UPnP option on the left
    5. Select the 'Disable UPnP' radio button
    6. Click 'Apply'
    Also, I would like to disable to IPv6 on the printer. This setting can sometimes cause issues. Use the instructions below to disable the IPv6
    On the front panel of the printer, touch the Wireless icon, it's the second of the four icons on the top.
    Navigate through the Wireless menu to  Advanced Settings and go to IPv6
    Turn IPv6 off
    I will watch for a reply from you. Thanks.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Photosmart 7510 scan error

    Hello,
    i have a problem with scanning and copying. If I try to make a copy/scan from the glass, it does not recgnize it, it tries to use the adf all the time, even if it has no paper in the adf. If you put a paper in the adf, it takes it and gets it out, but on the screen appears paper jam, check the paper in the feeder. I checked the sensors in the adf, they move ok, they are not stuck. I tried even disconnecting the feeder but it does noy work.
    Can anyone give me a hint on how to repair it? Thanks in advance. Luk

    Hi @Luk7475,
    Welcome to the HP Forums!
    I understand that you cannot scan from the glass of your HP Photosmart 7510 printer. I am happy to help you with this scanning issue!
    For further assistance, I will need to know the following:
    If you are using Genuine HP Ink cartridges, or Refills.
    If any of the cartridges are low or empty.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
    The Operating System you are using. If you do not know the Operating System you are using, please visit this website. Whatsmyos.
    In the meantime, please see the following guides:
    A 'Paper Jam' Error Displays on the HP Photosmart 7510 e-All-in-One Printer Series. (This is good for real or false paper jams).
    A 'No Computer Detected' or 'Connection Error' Message Displays When Scanning for HP Photosmart 7510....
    Hope these guides will help, and hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Will all five 564XL cartridges fit into a Photosmart 7510 at the same time?

    I have a Photosmart 7510 e-All-in-One, model C311a, and I need to replace the ink cartridges.  The current black ink cartridge is a 564XL, but the other four are regular 564.  I'm thinking of getting the XL size for all five, but will they all fit at the same time?  (It doesn't look like there's any room to spare in the photo and color slots.)  Thanks.

    The XL versions of the color and photo cartridges are the same physical size as the standard cartridges, they just have more ink.  The XL cartridges will fit in your Photosmart 7510 printer.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • PhotoSmart 7510 scan function doesn't work right after updating Maverick

    It was an ordeal but hp support was finally able to get my MAC to recognize my PhotoSmart 7510 all-in-one after the operating system was updated to 10.9.5. But now I get the scan function but I have no options as to size, dpi or what type file I want to save the scan to. Also, the quality is TERRIBLE. Granted I'm trying to scan old photographs but I was able to do this with no problem before. Now the grayscale is off and light areas of the images don't scan at all.
    I know that all the drivers are up-to-date but I don't know how to fix this problem.

    Hey @LK8888,
    Welcome to the HP Support Forums!
    I understand that you want to be able to scan with good quality on your Mac OS X 10.9.5 Operating System from your HP Photosmart 7510 e-All-in-One Printer. I would like to assist you with resolving this issue. Now you did state that you had quite a time with HP Technical Support trying to get your Mac to recognize your Photosmart. I'm afraid that if your scanner isn't working properly we may have to undue some of the steps completed by Technical Support to resolve this issue once and for all for you. However, before I have you delete or remove any software and drivers from your computer, could I have you take a look at the following document to ensure that you're using the proper scan software:
    Scan from OS X v10.9 Mavericks With the Full Feature HP Software for HP Multifunction Printers
    If everything now works perfect, great! If not, than unfortunately I'm going to need you to run through the following steps.
    Step 1: Uninstall your Printer Driver and Software:
    Uninstalling the Printer Software
    Step 2: Verify and Repair your Disk Permissions on the Mac:
    Open Macintosh HD and go to Applications
    Go to the Utilities Folder
    Open the Disk Utility
    Select the Hard Drive volume you are using (usually on the left)
    Select Verify Disk Permissions
    Once that process is done, select Repair Disk Permissions
    Step 3: Check for Apple Updates:
    Go to Apple
    Select System Preferences
    Select Software Update
    Click Update Now
    Install your available updates
    Restart your computer
    Step 4: Reinstall your Software and Drivers:
    HP Photosmart 7510 series C311 Full Feature Software and Drivers
    Please click the link above to download the appropriate Mac OS X 10.9.5 drivers for your product. Once the download is complete follow the step-by-step installation instructions to complete the install of your product.
    Once install is complete, try to scan!
    Please let me know if the steps provided resolve your scanning issue. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • HP Photosmart 7510 not working with Yosemite

    I see that most of the previous complaints are pretty old and here it is now July 2015 and the problem still exists.Surely HP could spend a bit of time recitifying this situation - or do you prefer we buy non HP printers?

    Hi , Welcome to the HP Support Forums! I understand that you would like the HP Software for your HP Photosmart 7510 e-All-in-One Printer, to work on your Mac running OS X 10.10. I would like to assist you with this. The Full Feature Software is available for your printer.Click here to download the HP Photosmart 7510 series C311 Full Feature Software and Drivers.Full List of supported HP Printers that Work with OS X v10.10 Yosemite.Go here for Instructions to: Download and Install a Mac HP Printer Driver and Software.If you need further assistance, please let me know. Hope this answers your question. Thank you for posting!

Maybe you are looking for