Photosmart 7510 takes 3 to 4 minutes before print starts windoows 7

When I click print the printer does not respond for several minutes. it then starts and prints normally. D link router wireless setup. Windows 7 home edition.

Hi,
Changing wired network name is not easy. I put up 2 options here:
(a) Using ePrint to send anything you want to print to the printer (ie send an email to it) or
(b) Use wireless for desktop to get same SSID, adjust the antenna on wireless card (of the PC) may help or try this:
   http://windows.microsoft.com/is-IS/windows7/Why-is​-my-wireless-signal-strength-so-low
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • When I miss a call or it goes to voicemail, it may take up to 10 minutes before I can use my phone for anything.  I have tried resetting it-has anyone else experienced this and fixed it?

    When I recieve a voicemail, or a missed call, it takes up to 5 minutes to be able to use my phone or check the voicemail.  I have tried turning it off and resetting it, has anyone else had this problem, and how did you fix it?

    When I recieve a voicemail, or a missed call, it takes up to 5 minutes to be able to use my phone or check the voicemail.  I have tried turning it off and resetting it, has anyone else had this problem, and how did you fix it?

  • Why is the 4 bata 12 - locking up after a download. Can take up to 2 minutes before it's usable

    Fire fox 4 bata 12, on MS Windows XP SP3, Computer Dell Optiplex 780, Core2 Duo CPU E8400 @ 3 ghz with 3 gig ram.
    Down load an image or other file and a like more than randomly FireFox becomes unresponsive for varies lengthens of time and can't be killed form the task manager. The can last for a minute or longer.

    Hi dcbluesplayer,
    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

  • TS1424 iTunes start up takes at least five minutes before it opens.

    When I select iTunes on my windows 7 it seems like its taking about 5 minutes to start. Any suggestions on how to repair iTunes?

    Cancel any downloads that resume on startup, by using the red X button on each download.

  • 2 minutes wait before printing starts

    Printing using applets.
    Theres always a 2 minutes delay ( irrespective of the length of the job ) before the callback methods starts getting invoked.
    I removed the printDialog( ) line , even then the delay exists.
    Is it because of the secutiry manager ?
    Any way to skip the delay ?
    Thanks
    Akif

    What printer are you using? Possibly is it a printer that uses PCL? (print control language--like HP) If so, then it is a "FEATURE" in Java that is there by design and not a bug. (This is what I was told by Sun engineers, and yes, I know their technical explanation, but it still does not help.).

  • MacBook pro takes more than 10 minutes to start with ML ?

    My Macbook pro takes more than 10 minutes to start. I press Start and it takes more than 10 minutes before I can enter my password. Need your help !

    Sounds like time for a PRAM reset. Here's how:
    1. Power down the machine.
    2. Locate the following keys on your keyboard in preparation for Step 4:
    ‘command’ – ‘option’ – ‘P’ – ‘R’
    3. Press the ‘power on’ button.
    4. Immediately – and before the grey screen appears – hold down ‘command-option-P-R’ all together.
    5. Keep them held down until you’ve heard the start-up chime twice. After you release them you should hear it again, and hopefully your Mac will boot up as normal.

  • Macbook Pro BIOS requires at least 1 minute before the Apple logo appears and Chime sounds.

    When I cold-boot my MacBook Pro, it takes a least 1 minute before I get the chime and Apple logo.
    Some background on the problem:
    After purchase I almost immediately installed Windows 7 on BootCamp and had no problems.
    Around 8 months ago I bought a SSD drive and CD-bay kit, put the original HD into the CD bay and the SSD in place of the original HD, installed OSX on the SSD and formatted the original OSX partition, this broke the Windows install.
    I tried in vain for around 2 months to repair the Windows partition without having to reinstall it to no avail, so I swapped the positions of the drives.
    Since then the Windows & OSX partitions work fine, however from a cold boot it takes upwards of 1 minute before the Apple logo appears and Chime sounds, after that it behaves as expected (maybe 20-30 seconds and I'm fully booted).
    Performing a soft restart behaves as expected too (Chime/Logo appear almost immediately and boot time is lightening fast!).
    When I close the lid, it exhibits a similar problem in that it takes about 1 minute before it has gone to sleep and I can't do anything to wake it until that time has past.
    It's not the end of the world, but it is slightly annoying, so any help would be greatly appreciated.
    My guess is some kind of EFI/BIOS problem, but I can't find any other examples of this problem and have no idea how I might fix.

    When in OS X go into System Preferences and Select Startup Disk. Then select the OS X entry, even though you are in OS X, and reboot.
    Some times the hardware gets confused as to which OS to boot and figuring it out can take some time. Once you select the OS X partition as the OS to boot to it should startup faster.
    If not then you have some other problem that I am not familiar with.
    You might also want to do a SMC reset, Google for the instructions found on the Apple KB site.

  • Photosmart 7510 e-all-in-o​ne series/ Printhead problem.

    Our photosmart 7510 e-all-in-one series has an message that reads 
    Printhead appears to be missing, not detected, or incorrectly installed.
    Not able to locate the problem.
    Happened right after I changed the ink. 

    Hello harry4955,
    Welcome to the HP Support Forums!
    I see that the HP Photosmart 7510 is displaying an error regarding the print head is missing, stating after changing your ink cartridges.
    I was able to locate this HP document: 'Missing or Failed Printhead' or 'Printhead is Missing, Not Detected, or Not Properly Installed' Mes.... I hope it helps, if not you may need to call HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here.
    Regards,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP Photosmart Premium C309g-m (Fails or SLOW to Print Wirelessly)

    My printer has usually worked until recently (past couple months).  I have re-installed the driver several times, uninstalled the HP software, re-installed the driver only... and still the same symptoms occur.
    OS: Windows 7
    WiFi Router: Linksys E4200
    Printer: HP Photosmart Premium C309g-m
    STEPS TAKEN:
    I begin a continuous "ping" of the printer from my PC and my ipad, to ensure I'm not losing network connectivity. 
    Pings are received on both pc and ipad without issue..
    I print a "test page" from the printer properties screen.
    Pings are dropped continuously...on both PC and ipad with one or two sporatic ones received with extremely high latency (29165 ms).
    Printer sometimes fails to print the document or the document takes 3 or more minutes to print.
    I believe it is an issue with the wireless network device on the printer.  I was hoping a firmware would fix it.  Can you advise me as to what the problem may be, where should I focus my troubleshooting? 
    I did run a HP Print/Scan Doctor tool, and it did say I had a "port mismatch" and that I needed to reboot my PC.  I rebooted my PC, re=ran, and still the same "Port Mismatch" error comes up.  So.. that leads me to believe it is an issue w/ my PC...but I can't find any thing that seems to be wrong w/ the port settings. Currently it is set on my printers hostname address, RAW, Port 9100.

    Are you installing and reinstalling the printer from the CD? Just to establish a clean baseline lets try a full uninstallation/ reinstallation from the drivers available from the HP website. 
    First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer. 
    In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it. 
    Then follow this link to download the full feature software and drivers for the printer (make sure to match your correct OS): 
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=3793676&
    Install that and let me know the result! 
    Have a great day!

  • I have continuously over the last 6 months struggled with syncing my iphone and ipod with itunes  The app continually crashes during the picture import.  AND by the way it takes 10-15 minutes before it even attempts to import photos.  The screen says impo

    I have continuously over the last 6 months struggled with syncing my iphone and ipod with itunes  The app continually crashes during the picture import.  AND by the way it takes 10-15 minutes before it even attempts to import photos.  The screen says importing photoes but doesnt try to optimize or anything for 10 minutes.  I have a 3gs with 16Gb so its not a cheap phone.  I have 10Gb free.  I have 6600 photoes.  This is very frustrating and undermines my confidence in your products.  My ipod is an ipod 4 with 16Gb also.  It does the exact same thing to it.  The last time, I had to import photoes a few at the time and with it taking 10-15 minutes each time for 6600 photos it is a long frustrating process.  But it will import every photo a few at a time.  The error message is just that itunes has stopped working.  no hint as to why. AND of course, my phone is out of use for the entire time.  You guys must not want to believe ur phones are a necessary tool...or maybe you dont want the consumer to believe it is.  I have tried to find solutions on your website as well as through other 3rd party communities.  Ultimately they were of no use.  I stumbled onto my solution by accident since Im a bit of a computer geek...a semi-geek.

    I have this issue too, I went into my Windows event viewer. (should have looked at this a year ago when this started)
    it said this
    Faulting application name: iTunes.exe, version: 11.0.2.26, time stamp: 0x51253247
    Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b8f
    Exception code: 0xc0000374
    Fault offset: 0x000ce6c3
    Faulting process id: 0x14d4
    Faulting application start time: 0x01ce194399f166ba
    Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
    Faulting module path: C:\Windows\SysWOW64\ntdll.dll
    Report Id: 0eb3c37f-8537-11e2-9351-50465d6737de
    basically whenever I try to sync my ipod touch 4G 64GB it crashes iTunes when it begins the pictures. if im lucky ill get 4-5 on there before it stops responding. its not my system or anything im running win7x64 8GB DDR3 ram (Corsair XMS3) AMD FX Eight core processor.
    It is silly that iTunes cannot add pictures to apple devices. it shatters whatever incline I may have to buy apple products. knda like the Airport Extreem router my dad bought the new firmware, caused my router to not function... why release firmware that breaks a product. -_- <-- off topic but still

  • When I enable imatch on my iPhone 4s it takes approximately 30 minutes before other data fills 13.2gb of usable data. This problem does not occur when I manually sync music to my phone. Is this a common bug, and if so; is there a fix?

    When I enable imatch on my iPhone 4s it takes approximately 30 minutes before other data fills 13.2gb of usable data on the phone. This problem does not occur when I manually sync music to my phone only when I access imatch. Is this a common bug, and if so; is there a fix?

    yes it is. you can sign out of itunes account then sign back in. use http://support.apple.com/kb/ht1311 to sign out.

  • Every time a new window in safari opens, it takes about 2 minutes before I can actually use it.  Can anyone help?

    Every time a new safari window opens, it takes several minutes before I can actually use it.  This seems to have started after the most recent updates.  I have reloaded the operating system, but the problem persists.  Ideas?

    Found the problem  Plug-ins (extensions?)  I had loaded were not compatable with latest update.  Once they were deleted, sfari runs fine.  Hope this helps others

  • BI 11G : logging in into reporting services takes minutes before landing

    All,
    logging in into em/console works relatively fine....but when I want to log in into analytics...it takes minutes before I'm logged in.
    I have the same problem when I want to log in into Administrator or Catalog manager (online)
    Installation is on Linux (32bit) - client tools on windows.
    At this moment I have no clue what can cause this problem. Anyone already noticed the same issue or has some good tips?
    Txs!!
    A.
    Edited by: ADB on 19-okt-2010 5:34

    Hej Nico,
    it was a pretty stupid one...
    I migrated my rpd...and didn't change the connection pool settings correctly to point to my new db.
    That was already a problem of course ;-)
    And because I had some initialization blocks defined in the rpd, it took a while before they turned an error....
    and that was the reason why it took such a long time before I could log in into the reporting environment or a client tool.
    Once I had disabled the init blocks, it was no problem. And after I changed the connection pool correctly everything was solved.
    Hope things are more clear now.
    Txs,
    A

  • When i ask my macbook air to print it tells me it is looking for my printer it takes several minutes before it finds it and then prints, why is that as my wife is connected to the same printer in the same way (bluetooth) and hers prints straight away

    As per my question, when i ask it to print it tells me it is looking for my printer this takes several minutes before it prints.  my wife is in the same room using an imac also using a bluetooth connection to the same printer and hers prints immediately.  why is this.

    Perhaps you could try this to resolve your issue:
    *How to Reset the Printing System*
    1. Open System Preferences > Print & Fax
    2. Move your mouse over the Printers list
    3. Hold down the Control button and click the mouse (or right click if supported).
    4. Click "Reset printing system ..."
    5. Restart your Mac
    This will remove your print queues but not your printer drivers. So you will only need to add your print queues again.

  • Yaourt takes several minutes before start downloading

    Hello everyone, I'm having a problem when I want to deal with any package in AUR repo using yaurt. It takes several minutes before start downloading.
    For example:
    $:> time yaourt -Ssa package-query
    aur/package-query 1.1-2 [installed] (1656)
    Query ALPM and AUR
    aur/package-query-git 20120121-1 (198)
    Query ALPM and AUR
    real 1m5.524s
    user 0m0.287s
    sys 0m0.053s
    Any suggestion???
    Thanks in advance!!
    *sory for my englsh, I'm from Argentina. ;D
    Last edited by emab73 (2012-11-20 16:14:55)

    I know it doesn't answer your specific question but you could experiment with another AUR helper.  Or just use makepkg.

Maybe you are looking for

  • My iPhone 5 screen display expands randomly

    My iPhone 5 screen display expands randomly & I have to turn it off to fix it.  Sometimes this is tricky to do as I can barely see the red bar to slide it to turn off.  Has anyone else had this problem?  It's really frustrating.

  • An unknown error has occurred (-1302)

    Can someone assist with figuring out this error message? Is there an index of iTunes error messages? Windows PC - XP Pro SP2 iTunes version 6.0.4.2

  • After closing Preferance(Mac) a gray 1"x1" blanck gray box at top left of screen remains.

    The only way to get rid of the box is by closing FF4. Also if close Add-On Manager tab when it is in Extensions tab, Next time getting to Add-On Manager requires inputting passward three times!!

  • Itunes 10.1

    i can't seem to figure out how to get the new upgrade on my IPAD i upgraded on my mac also i lost the new movies i rented on ipad when i synced with my mac...what's the deal? More specifically, where is the "about" info on the ipad regarding itunes?

  • Mail Dosn't load images

    Hi I have been having this problem for quite some time now, it happened out of the blue and can be annoying. When in Mac OS X mail and I select an message the content loads a a simple text message I think have to select load best alternative from the