Photosmart 7515 connect via USB but not wireless, Device not found on Network

Purchased a 7515 all-in-one, was able to setup wirelessly to MacPro but has lost ability to connect wirelessly. This happened with OS X Lion and nor MountainLion. Have a TimeMachine Airport. Printer connects to network but during setup from MacPro, repeatedly get "Device Not Found on Network" after stepping through wireless installation setup screens. I have reset router, printer, firmware updates, software updates.... at wits end. I have followed the instructions on the below resource page link with no luck. Use WPA-PSK encryption (Automatic AES or TKIP) on network and diagnostics on printer pass.
Please help anyone!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02946597&tmp_task=solveCategory&cc=us&dlc=en&la...

It sounds like the Macs and the printer just aren't communicating.
If you press the network icon on the printer, does it indicate it is connected to the network?
I recommend two additional steps that are not listed in the linked document. The printing system of the Mac may need to be reset as it will clear any software that could be interfering (such as corrupted installations).
Follow the steps as outlined for 10.7 or 10.8 in this document from HP.
The next step is to install the driver package from Apple. This can be found here.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

How can I transfer photos from LG phone to mac notebook. Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

How can I transfer photos from LG phone to mac notebook. Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

Just open your LG volume up likes its an external HD and drag all photos onto a folder in your macbook Air.

I have my IPod Touch connected via USB but it says it's not connected to my computer

I have my IPod Touch connected VIA USB port but a message tells me it's not connected to my computer so I can't get mail, etc. What do I have to do to remedy this?
Thank you.
Rjhs

What is the exact wording of the error message?
What are you trying to do?
The USB connection provides not internet connectivity. The iPod can only connect to the internet via wifi

HP Photosmart C3180 connected via USB hub

I am using an HP C3180 printer connected via USB to a Mac PowerBook G4. When connected directly to the PowerBook G4 the printer works just fine. Trying to connect it via a Belkin 4 port USB (1.1) hub ----the printer is not seen when connected via the hub. Can the C3180 be connected via a hub ? Must it be USB 2.0 if it is a hub ?

I have the HPC309a, but had the same problem with my airport a while back.
If you have a password on your airport network and try to print, if this works and you want to put the password back on, you'll have to go through a setup process, that is a pain, but at least you'll know what the hold up is.
Also: Check your firmware on your airport and see what version you have. The new 7.5.2 is giving people problems. You can downgrade firmware and try that. I am running 7.5.1 and all is well.
Finally, I dumped all HP downloaded software (uninstalled it all, this did it in the end for me) as Apple has their own. http://support.apple.com/kb/ht3669

Why will my Iphone connect via USB on one computer and not another?

My IPhone 5s connected to my laptop and Itunes no problem, as soon as i did the ITunes update now neither my laptop or my ITunes will read my iphone via USB. I have no idea how to fix it.
(My laptop is Windows 8)
It can't be a cable issue because i charged my IPhone via my desktop and it connected no problem, it's something to do with this ITunes update i think.
Can someone suggest a fix please? I'm totally stuck!

could be your computer's firewall is preventing the proper installation of your CIT200. try disabling and reinstalling the drivers again.
"Don't fix it if it ain't broken."

Photosmart 7525 connect via USB & wireless

I just got a new HP 7525 and would like to know if I can access the printer using the USB connection for my primary desktop PC; and also have other PCs/devices occasionally and randomly access the same printer via a wireless connection using my router.
This question was solved.
View Solution.

Yes, you can use the printer with both the USB and wireless connections simultaneously.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

IPod is recognised via USB, but all other devices are no longer recognised.

After a year of good work, at one moment the USB ports on the front of the computer doesn't recognise any device, except the Ipod Touch 4G wich is working fine. All other devices are not capable of communicating with the PC using USB-ports (camera's, SD-cardreaders, TomTom, etc.). It might have something todo with the IOS 4.2.1 upgrade (Apple), but I'am not sure. Any solutions/suggestions please?
Message was edited by: GuitarArnie

Welcome to the discussions,
did you check for possible BIOS updates for your computer or the other devices you want to connect?
See also this article about driver installation for USB Mass Storage devices: http://support.apple.com/kb/TS1538

TS2756 I can no longer connect via USB/service missing

..& my iPhone does not show up on the list anymore. I can still use Wi-Fi, though. I would like to be able to use the USB connection again. Resetting the network settings doesn't help. BTW, I'm using it with my MacBook Pro running 10.7.5 and my iPhone has the latest iOS update as well.
When I first got the phone, I always used my internet connection via USB, but then it started giving me trouble. I tried all kinds of suggestions that I found here and it was a real crap shoot -- sometimes it worked, and sometimes not. Now it just won't work at all. I recently deleted my iPhone from the list of services thinking that the next time I plugged it in, it would recreated the service. It did not. So, I'm still using it as before: just connecting over Wi-Fi (the network is still available, it just doesn't show up in my list of services on the left-hand column under "network").
Anyone have any suggestions that they know will fix this?

Hi DaveX83 and welcome to the discussions.
A few things to try.
Press the reset button once on the back of your Extreme and let it restart. Check for proper operation.
If no help there, keep the ethernet cable connected, and open Airport Utility. Click on Manual Setup near the bottom of the pane. On the next screen click the Airport icon at the upper left of the pane, then click Wireless in the line just below that reads Summary - Time Capsule - Wireless - Access.
Check to see that your wireless is set up, security set up, passwords, etc. You may need to reconfigure your wireless settings again and update the Extreme to store them and restart.
Hope this helps.

Can print via usb, but not via wireless network

My new MacBook Pro prints to my Epson RX500 when the printer is connected via USB to the MBP. However, when the the printer is connected by USB to my desktop PC running XP, the MBP does not print to it. I can see disks and transfer files wirelessly among desktop PC, laptop PC & MBP. The MBP finds the RX500 on the network, and has a driver for it. I can set it as the Mac's default printer. When I print, say from OpenOffice or TextEdit, the dialogs seem ok. Sometimes I see the print queue icon wink in and out on the dock. But the document doesn't get printed. The desktop says the printer is shared, and I can print over the wireless network from my PC laptop running XP.
One of the Apple troubleshooting pages suggests that I should have the same driver version on my XP desktop and my Snow Leopard MBP. I don't know how to tell what version the PC is running.
Any suggestions?

Just to be sure - you know that you can't use Epson's "USB-only" driver for printing to a Windows-shared printer?
You must use the Gutenprint driver - that's why Apple included the Gutenprint drivers in OS X.
Updates for Gutenprint:
http://gimp-print.sourceforge.net/MacOSX.php

Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB. I already tried uninstalling and reinstalling iTunes....still nothing. Any ideas?

Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

HT4235 my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection? i just want it to connect to my itunes again!!!

my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection?
i just want it to connect to my itunes again!!!
Thank you to anyone and everyone that manages to help!

Hello webster995,
Thank you for the details of the issue you are experiencing with your iPhone not appearing in iTunes. I recommend following the steps in the article below to troubleshoot the issue you described:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M.

I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8 I have downloaded the latest UFR2 divers. I am trying to connect to the printer but the printer is not showing appearing in Print

I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8
I have downloaded the latest UFR II driver. (UK Version)
I am trying to connect to the printer but the printer is not appearing in my Print/Fax Preferences.
When I click the box "More Printers" under the Default printer the drop down box gives me a heading "Canon IPv6 (UFRII) with the option to add or cancel. (The add is highlighted). But there are no printers showing in the box. Nothing. Can anyone help?
Is there a problem with my Mac setup or maybe a setting in my printer?

Mac UFR II Printmonitor
UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
Other Printers:
Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities]

My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

Shootist007 wrote:
If the system won't boot from the new drive the OP bought and install OS X on it it certainly won't boot from the original drives Recovery HD partition.
Sorry genius.....but if the Recovery disk shows up that means the disk cable isn't bad. Could be he did have a screwed up HDD and when he put the NEW HDD in (after putting the OS on it via USB) the computer didn't reconize it and therefore didn't boot the OS. Just maybe right genius? Don't rush to criticize someone's recommendations until you realize other possibilities. (I did say "if it does")
Thank you

HP Officejet Pro 8500A 910A, Vista 32-bit, will not connect via usb to my PC!!!

I used to have this all in one connected to my pc, until I was experiencing a few printing issues, so I decided to uninstall it! When I tried to reinstall it, the pc will not connect it. I have tried different ports and have replaced the cable, also downloaded the latest software and drivers all to no avail. I can connect wirelessly to my laptop, but unfortunately this isn't a solution for my desktop as it's not wireless, therefore it has to be connected via usb. At my wits end, please help me!!!!!
This question was solved.
View Solution.

Hello,
Can you try inserting a flash drive into one of the USB ports in the printer, to make sure it reads it?
The port on the printer might be what's giving you the issue. Also, can you try connecting the printer USB to a different PC?
Let me know the outcome.

HT201210 I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items!

I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items! Help! There is not error message number just the text message. I've searched for an answer but have found nothing on "transfering items purchased to your iTunes library".

Right click on your device icon on the left pane of iTunes and click on transfer pur....

Photosmart 7515 connect via USB but not wireless, Device not found on Network

Similar Messages

Maybe you are looking for