Photosmart 7520 Windows 2008 R2 support

Please allow support for Windows 2008 R2. Most Windows 7 x64 drivers work under Windows 2008 R2, but alas, not the Photosmart 7520.
Tom

I am actually now using Windows 2012 R12. Install disc and exe/msi basically says it won't install under this OS. Now, if that install message could be circumvented, it should work fine since 2012 R2 is largely based on Win8.
Tom

Similar Messages

ADConnector v9.1.1 and Windows 2008 R2 - Supported? (OIM 9.1.0.2)

Below is my question around the OIM AD connector version 9.1.1 and its support with Windows Server 2008 R2.
From the AD Connector Documentation I can see that Active Directory 2008 is a supported target system by the OIM connector v9.1.1. There is no mention of Windows 2008 R2 at all in this document: http://download.oracle.com/docs/cd/E11223_01/doc.910/e11197.pdf
My question is: Is Active Directory on Windows Server 2008 R2 supported as a target system by v9.1.1 of the AD User Management Connector. If not what version of the AD User Management connector do we need to upgrade to (9.1.1.4 or 9.1.1.5)?
I am crossing my fingers for the answer to be that v9.1.1 does support Windows Server 2008 R2 to save us the pain of an upgrade.
Thanks..

It depends on if you mean "officially supported" or "will work".
On the officially supported line AD 2008 R2 is sometimes considered different enough to need a separate certification. Check your connector release notes and if that doesn't include AD 2008 R2 open a support case with Oracle to get the official ceritification schedule.
With 99% likelyhood it will work fine but you may end up in a non supported state which may or may not be acceptable in your organization.
Best regards
/martin

Why no 64 bit editions - or no Windows 7 / Windows 2008 server support yet

Hi all
I'm still having to run trials etc on a Windows 2003 Server virtual machine
Can we get at least SUPPORT so we can run the trial versions on Windows 7 / Windows 2008 server 64 bit versions.
Most computers are coming with Windows 7 pre installed now so having to keep running on XP type systems is a bit OLD now - especially with SAP enbracing new web based technology.
Hi Mods
perhaps you can delete this as I've just seen the other Windows 7 support thread.
Cheers
jimbo

You posted your inquiry to a hardware forum.
Which blade server do you own?
Do you have a question on any specific hardware component in that system?
Perhaps we could point you to that system's documentation
http://www.oracle.com/technetwork/indexes/documentation/index.html
if you told us which hardware you own.
Frankly, you need to go find a Microsoft-centric forum and ask your question over there.

Lost "Printer Assistant" for Photosmart 7520 - Windows Home 7 - 64bit.

Have uninstalled and reinstalled software from online (with original disc, as recommended). Still lost.

Hi,
Uninstall the software from the start menu, then download and install the latest software below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108670-2&cc=us&dlc=en&lc=en...
If you're still unable to access the Printer Assistant, please let me know what happens when you click on the HP Officejet 7520 icon on your desktop or under All Programs > HP Photosmart 7520 folder.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Does GRC 5.3 support Windows 2008?

Dear Experts:
We currently have GRC 5.3 running on Windows 2003 Servers (64bit). They are running fine without any issues. But we are in the process upgrading the servers from Windows 2003 to 2008. I tried to find out if Windows 2008 is supported in GRC 5.3, but in the SAP market place product availability matrix (PAM), only show what browser it will support. No indication for Windows server side. From the installation guide of GRC 5.3, it only listed WIndows 2003, NO 2008 mentioned.
Where I can find the right information on if GRC 5.3 can run on Windows 2008 or not? Are any of you upgraded from 2003 to 2008 for GRC server? Any issues need be aware of?
Thanks,
Yujun Ran

Hi Yujun,
Since GRC relies on the underlying NetWeaver OS PAM, you can install on Windows 2008 Server, if you are successful in installing your Netweaver 7.0. My recommendation would be to look at the compability of database and other supported add-ons too before you actually go with Windows 2008.
Best Regards,
Raghu

Can I run OAS in 64bit Windows 2008?

I'm going to install the OAS in our 64bit Windows 2008 for evaluation, however, both the x86 and win64 file cannot be installed.
The following message is prompted when we attempt to install the win64 version:
The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher.
And the following message is prompted inside a DOS prompt when we attempt to install the x86 version:
Checking operation system version: must be 5.0, 5.1 or 5.2 . Actual 6.0 Failed <<<<
Existing Oracle Universal Installer, log for this session can be found at C:\.......
We can only install the OAS in a Windows XP workstation, does it mean that we have to use a Windows XP workstation as production server?
May I know if there has any OAS download for 64bit Windows Server 2008?

Not exactlly. Maybe it's certified now, but still cannot install.
According to the update:
1. Windows 2008 is supported with patchset 10.1.3.4 or higher. Before applying the 10.1.3.4 patchset, customers must first install the base 10.1.3.x products using the following patches:
. 10.1.3.1.0 SOA requires patch 6712338 (http://updates.oracle.com/download/6712338.html)
. 10.1.3.2.0 WebCenter requires patch 6971010 (http://updates.oracle.com/download/6971010.html)
. 10.1.3.x Companion CD requires patch 7129052 (http://updates.oracle.com/download/7129052.html)
. 10.1.3.x Companion CD ASG Install requires patch 7129469 (http://updates.oracle.com/download/7129469.html)
. 10.1.3.x Companion CD Failsafe Install requires patch 7191497 (http://updates.oracle.com/download/7191497.html)
Additional notes for Windows 2008:
. The patches listed above apply to both 32 and 64 bit versions of Windows 2008.
. Please review the release notes on http://download.oracle.com/docs/cd/E12524_01/relnotes.1013/e12523/install.htm#sthref7 for the 10.1.3.4 patch set for known issues for Windows 2008.
But....
1. 10.1.3.4 still not avaialble for direct download, you have to download 10.1.3.x then apply the patch. But the download of 10.1.3.x cannot be installed, how can we apply the patch?
2. You cannot download the patch without Metalink account (maybe, it's not for evaluation at this moment)
So, it still have to wait until the full package of 10.1.3.4 or above is available for direct download.

Systemcopy to Windows 2008 R2 Server

Hello,
I have a question concerning SAP Net Weaver Systems and Windows 2008 (R2) Support.
Now Windows 2008 R2 is also released from the SAP for a lot u201Colderu201D Products like:
- SAP Net Weaver 7.00 SR3
- SAP Net Weaver 7.01
In the SAP Notes it is described that SAP Net Weaver Releases like
- SAP Net Weaver 7.00
- SAP Net Weaver 7.00 SR1
- SAP Net Weaver 7.00 SR2
have to be upgraded to one of the supported SAP Releases.
My question is now, if I had installed a SAP System with the Installation CD/DVDu2019s from for example SAP Netweaver 7.00 SR1 and implemented the newest Kernel and ABAP/JAVA Support Stacks, can I handle the System as a SAP Netweaver 7.00 SR3 system or not.
In my opinion a Service Release is only a Export CD with a higher included level of Kernel and Support Sacks.
What is your opinion. Am I wrong?
Thanks for your help.
Regards
Franz-Josef

> My question is now, if I had installed a SAP System with the Installation CD/DVDu2019s from for example SAP Netweaver 7.00 SR1 and implemented the newest Kernel and ABAP/JAVA Support Stacks, can I handle the System as a SAP Netweaver 7.00 SR3 system or not.
yes.
> In my opinion a Service Release is only a Export CD with a higher included level of Kernel and Support Sacks.
that is not only your opinion, it is the way SR's are defined.
For the new Windows Operating system we primary need a minimum Kernel version and - depending on the database also a certain SP-Stack for the newer database version possibly used when installing on this new plattform.
regards
Peter

Cisco DCNM 5.1(3u) - any particular version of Windows 2008?

The documentation does not specify any particular version beyond Windows 2008. 32bit vs 64bit, R1 or no R1?
Server System Requirements
Cisco DCNM Release 5.1(x) supports running the Cisco DCNM server on these operating systems:
•Microsoft Windows 2008 is supported in Cisco DCNM Release 5.1(3u)
http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/dcnm/release/notes/dcnm_5_1_relnotes.html#wp61633
I have to get the thing buit for me by another team and I don't want to have to go back to them to get it "fixed" etc.

Hi,
DCNM is supported in all versions of Windows 2008 (both 32 and 64 bit) and also R1.
The latest version DCNM 5.2(1) is available for download now. It supports Catalyst 6500 switches and many more new features.

HP Photosmart 7520 printer window displays "Loading" can't copy/scan/fax from printer.

Our power went out approximately five days ago. Once the power came back on I unplugged our computer and printer, replugged them in tried to restart each. We are set up wireless....through our landline phone service and satelite TV. The PC works fine, I can print from the PC with the HP Photosmart 7520 printer and it prints fine. However, the printer does not display any functions in the printer screen. I am unable to get it to come back so that I can copy/scan/fax. The printer window just keeps displaying the word "Loading" and the circle keeps going around on the printer screen (for 3 hours today.....same thing before....I keep shutting the printer down and retrying to no avail) We did get a message of some error "syntec" not connected. We have no idea what that is. Everything is connected exactly how it was prior to our power going out. The printer is just over a year old. We seem to keep having issues of various kinds with this printer. We are not very tech savy but, can usually get things accomplished on our PC and we have used the printer often to copy/scan/fax. Thanks for any help, much appreciated.

Welcome back to the HP Community @logger2 !
I saw your post about how ever since your power went out, the display on the printer will not function properly, causing you to not be able to scan, copy, or fax. My best suggestion would be to try another power reset (below), and if the screen still does not work properly, to contact us directly to see what your replacement options are for another printer.
Reset Instructions:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Make sure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power.
Reach our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Windows 2008 server 32 bit support

Hello,
Is MaxDB officially supported for Windows 2008 server 32 bit platform?
Thanks,
Jose

Jose Lopez wrote:>
> OK, then perhaps mention specifically W2003 in the download link?
Hmm... about what download link are you talking?
The one in the download area here in SDN?
If so, then this is not relevant for SAP customers as they should get all their software via DVD delivery or the Service Marketplace downloads!
In the service marketplace download sections there are no restrictions given, since the Product Availability Matrix (https://service.sap.com/pam) contains all the release/support information.
In general, the PAM is the one single place to check for supported versions.
regards,
Lars

Windows 2008 Standard SP1 will Support MS SQL Server 2008R2 Enterprise Edition ?

Dear ,
Currently we are running MSSQL Server Enterprise 2008 Edition on Windows 2008 Standard Edition 64Bit (.Net 3.0). Now we are upgrading the MSSQL Server to 2008R2 Enterprise with SP2. Will it support to upgrade on the same OS or do we need still upgrade
OS also to Windows 2008 R2?
1. Do we need to upgrade OS from 2008 to 2008R2 Sp2.?
2. MSSQL 2008/2008R2 Enterprise on Windows Standard is compatible ?
Need your help on above details.
Thanks

Hello
Check support matrix:
https://msdn.microsoft.com/en-us/library/ms143506%28v=sql.105%29.aspx#EEx64
need only sp2 if not have to OS.
and check your sql version upgrade path:
https://msdn.microsoft.com/en-us/library/ms143393%28v=sql.105%29.aspx
sorry my english

CiscoWorks LMS 4.0.1 is supported on Windows 2008 EE R2 SP1?

Installing CiscoWorks LMS 4.0.1.
I need to know if Windows 2008 server EE R2 with SP1 is now supported.
Many thanks for help.
Andrea

Hello,
Service Pack 1 of Windows 2008 Server Enterprise Edition R2 is not officially supported yet. Reference the readme.
However, I have applied SP1 to my installation of LMS on Windows Server 2008 EE R2 without breaking it. Your mileage may vary.
Hope this helps.

Is owb 11g r2,supported by 64 bit windows 2008 server

is owb 11g ,r2 supported on 64 bit windows 2008 server.
is it true that : OWB 11g,r2 is supported only for 32 bit windows 2008.

There is no 64b client for windows at this time. You can check on Oracle for available downloads.
http://www.oracle.com/technetwork/developer-tools/warehouse/downloads/software/index.html

SAP Conversion Agent for PI 7.1 EHP 1 and Windows 2008 Support

Hello
I have read that some people were able to run SAP Conversion Agent on a PI 7.1 EHP1 Installation on Windows 2008 Sever. But in the Product Availability Matrix there is no support for 2008 yet.
In the SAP Library (http://help.sap.com/saphelp_nwpi71/helpdata/en/43/fc39c16bfb025ee10000000a1553f7/frameset.htm) under the release notes for SAP Conversion Agent there is still version 8.5, but when I install the actual Support Package I have Conversion Agent 8.6 running and according to information on the informatica.com site this version is running under 2008!
Has anybody clear and actual information about which OS the newest SAP Conversion Agent for PI 7.1 EHP1 supports? Or has anyone experiance on Conversion Agent and Windows 2008 Server?
Thanks
Christoph

Hi Mark
Thanks for your reply! Fact is that in the actual Package (SP06) the version of Conversion Agent Engine supplied is not 8.5.5 as in the SAP Note mentioned, it is version 8.6.0:
C:\Documents and Settings\pi1adm>CM_console -v
Engine-Version: 8.6.0(Build:30)
Engine-Syntaxversion:4.00.10
I will oben a ticket for that ...
Regards
Christoph

Windows 2008 R2 - snmp 64bit counters support?

Hi all,
I wonder if Windows 2008 R2 Standard supports 64bit counters from IF-MIB (I mean the '1.3.6.1.2.1.31' OID). I can get the ifName, ifAlias, ifSpeed and several other objects, but the two most important (ifHCInOctets and ifHCOutOctets) are unaccesible (Error
in packet).
Thanks!
R.*

Hi,
Thanks for posting here.
Currently, Windows gets it’s interface status from MIB-2. Since these 64bit SNMP counters (ifHCInOctets, ifHCOutOctets, etc.) are defined as
an extension to IF-MIB, Microsoft has not implemented it.
If you want to monitor NIC usage , Microsoft system center might meet your requirement :
Additional information for your refer:
Management information base support in Windows 2000, Windows XP, Windows Server 2003, and Windows Vista
http://support.microsoft.com/kb/237295
What Is SNMP?
http://technet.microsoft.com/en-us/library/cc776379(WS.10).aspx
Thanks.
Tiger Li
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Photosmart 7520 Windows 2008 R2 support

Similar Messages

Maybe you are looking for