Photosmart 7525 now errors when insert USB thumbdrive (error B8BD3348)

I have been using a USB thumbdrive to scan documents then move to my computer to save (I prefer this over emailing documents, routed through the internet, for security). I have done this for months with the same printer, flash drive and laptop.Recently, I inserted the thumbdrive, the screen flashes blue with a code I think is B8BD3348 (it flashes bright so the video on my phone gets overwhelmed and blurs, and it is gone in under 2 seconds) then the screen goes black with "Printer Error: There is a problem with the printer. Turn the printer off then on." and all the lights (power, network, home, back, cancel and help) start flashing.I can reset (if I take out the USB, otherwise when it restarts it does the same thing). And the USB thumbdrive can still be read by the computer, and I have scanned the thumbdrive (TrendMicro) and found no issues.

Hello , and welcome to the HP Forums, I hope you enjoy your experience! I see you are having USB issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find your product number. Also, please include which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!

Similar Messages

Kernel panic when inserting USB drive

Hi,
When I connect my FreeCom USB drive to my Macbook Pro I get a kernel panic in about a minute.
Who can help me?
Error dump:
Interval Since Last Panic Report: 75543 sec
Panics Since Last Report:          1
Anonymous UUID:                    086C7B75-D92E-34F9-C3BA-3E00DFEADFD6
Fri Apr 12 19:23:28 2013
panic(cpu 0 caller 0xffffff8002ef1b71): "hfs_UNswap_BTNode: invalid backward link (0x00000ec4 == 0x00000ec4)\n"@/SourceCache/xnu/xnu-2050.22.13/bsd/hfs/hfs_endian.c:297
Backtrace (CPU 0), Frame : Return Address
0xffffff811389b2b0 : 0xffffff8002c1d626
0xffffff811389b320 : 0xffffff8002ef1b71
0xffffff811389b370 : 0xffffff8002ee6ac4
0xffffff811389b3b0 : 0xffffff8002d1940a
0xffffff811389b4a0 : 0xffffff8002d163b3
0xffffff811389b550 : 0xffffff8002d18a7f
0xffffff811389b5a0 : 0xffffff8002f1070f
0xffffff811389b5d0 : 0xffffff8002f14856
0xffffff811389b640 : 0xffffff8002efb718
0xffffff811389b6e0 : 0xffffff8002d10ee4
0xffffff811389b750 : 0xffffff8002f48b99
0xffffff811389bf50 : 0xffffff8002fe063a
0xffffff811389bfb0 : 0xffffff8002ccdd23
BSD process name corresponding to current thread: mds
Boot args: -s -v
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide:     0x0000000002a00000
Kernel text base: 0xffffff8002c00000
System model name: MacBookPro5,3 (Mac-F22587C8)
System uptime in nanoseconds: 77389550735760
last loaded kext at 77087679360457: com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5 (addr 0xffffff7f850e4000, size 86016)
last unloaded kext at 77228607263168: com.apple.driver.AppleUSBCDC          4.1.23 (addr 0xffffff7f8503b000, size 12288)
loaded kexts:
com.Logitech.Unifying.HID Driver          1.2.0
com.vmware.kext.vmioplug.10.1.24          10.1.24
com.vmware.kext.vmx86          0104.03.86
com.vmware.kext.vmnet          0104.03.86
com.vmware.kext.vsockets          90.4.23
com.vmware.kext.vmci          90.4.18
com.Logitech.Control Center.HID Driver          3.5.1
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.iokit.IOBluetoothSerialManager          4.1.3f3
com.apple.filesystems.autofs          3.0
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AGPM          100.12.87
com.apple.driver.AppleSMCLMU          2.0.3d0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.3.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleHDA          2.3.7fc4
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.3f3
com.apple.driver.AppleMikeyDriver          2.3.7fc4
com.apple.GeForce          8.1.0
com.apple.driver.AppleMuxControl          3.3.0
com.apple.driver.AppleMCCSControl          1.1.11
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.SMCMotionSensor          3.0.3d1
com.apple.driver.AppleUSBTCButtons          237.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.AppleUSBTCKeyboard          237.1
com.apple.driver.AppleIRController          320.15
com.apple.iokit.SCSITaskUserClient          3.5.5
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.3.1
com.apple.driver.AirPort.Brcm4331          614.20.16
com.apple.driver.AppleUSBHub          5.5.5
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AppleAHCIPort          2.5.1
com.apple.nvenet          2.0.19
com.apple.driver.AppleUSBEHCI          5.5.0
com.apple.driver.AppleEFINVRAM          1.7
com.apple.driver.AppleUSBOHCI          5.2.5
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleACPIButtons          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.7
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
com.apple.iokit.IOUSBMassStorageClass          3.5.1
com.apple.driver.AppleBluetoothHIDKeyboard          170.2
com.apple.driver.IOBluetoothHIDDriver          4.1.3f3
com.apple.driver.AppleHIDKeyboard          170.2
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.kext.triggers          1.0
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.iokit.IOSurface          86.0.4
com.apple.iokit.IOBluetoothFamily          4.1.3f3
com.apple.driver.DspFuncLib          2.3.7fc4
com.apple.iokit.IOAudioFamily          1.8.9fc11
com.apple.kext.OSvKernDSPLib          1.6
com.apple.driver.AppleHDAController          2.3.7fc4
com.apple.iokit.IOHDAFamily          2.3.7fc4
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.3f3
com.apple.driver.AppleGraphicsControl          3.3.0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.11d0
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.3.0d51
com.apple.driver.AppleSMBusPCI          1.0.11d0
com.apple.nvidia.nv50hal          8.1.0
com.apple.NVDAResman          8.1.0
com.apple.iokit.IONDRVSupport          2.3.7
com.apple.iokit.IOGraphicsFamily          2.3.7
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.AppleUSBMultitouch          237.3
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleUSBMergeNub          5.5.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.5
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
com.apple.iokit.IO80211Family          522.4
com.apple.iokit.IOUSBUserClient          5.5.5
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.3.1
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBFamily          5.5.5
com.apple.driver.NVSMU          2.2.9
com.apple.driver.AppleEFIRuntime          1.7
com.apple.iokit.IOHIDFamily          1.8.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220.2
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          345
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.7
com.apple.iokit.IOPCIFamily          2.7.3
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: MacBookPro5,3, BootROM MBP53.00AC.B03, 2 processors, Intel Core 2 Duo, 2.66 GHz, 8 GB, SMC 1.48f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x859B, 0x435435313236344243313036372E4D313646
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x859B, 0x435435313236344243313036372E4D313646
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: SAMSUNG SSD 830 Series, 256,06 GB
Serial ATA Device: MATSHITADVD-R   UJ-868
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 2
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0x24100000 / 3
USB Device: HL-2030 series, 0x04f9 (Brother International Corporation), 0x0027, 0x24140000 / 6
USB Device: DYMO LabelWriter 400 Turbo, 0x0922 (Dymo Corporation), 0x001a, 0x24120000 / 5
USB Device: USB to ATA/ATAPI Bridge, 0x152d (JMicron Technology Corp.), 0x2329, 0x24130000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24400000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52b, 0x06200000 / 3
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06110000 / 6
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0237, 0x04600000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2

Just as final note on this topic. I discussed the problem with the local Apple Repair Centre who advised reinstalling 10.5.1, as suggested by baltwo, before bringing the machine in for repair. I did this and everything seemed OK. It has been running backups for 10 days now without a problem.

Script: When insert USB, run App.

Here's the deal:
When I plug in a USB drive, and it pops up on the desktop, I want it to automatically run a little application thats in it. This application would be some text document or something that would open up like a notice. I can do that part.
I just need help figuring out What program to use to write this "autorun" script in, and how to go about writing it.
Also, I want this to be able to fire every time I insert that USB key into a mac, of any kind.
Is. This. Possible. Haha. I'll be looking forward to anyone's insight into this.
Macbook Pro 2.3GHz Core Duo, 3GB RAM, 15" Mac OS X (10.4.9)

It isn't possible to create a script on an USB drive which would run every time the drive is connected to the computer; for security reasons, scripts such as these must be set up through an interface on the computer prior to the drive being connected that requires explicit action on the part of the person using the computer.
The closest possible thing that can be done is to create a picture which includes the message, place the picture on the drive, and set it as the background picture for the folder that opens when the disk is double-clicked.
(22421)

Freezing MBP when inserting USB or Thunderbolt connector

I have quite new MBP Retina, it was working very well in the beginning but now, without any reason, it is not working that well. When I connect any USB connector (printer or external HDD), thunderbolt with ethernet adapter etc. - the cursor freezes for 5-10 sec (just now when connecting the ethernet adapter, the computer has frozen completely and I had to do a force restart). The same when opening the lid - it often takes quite long time before the laptop awakes (there is a grey and then light blue screen) and often the cursor freezes too for some time.
This is very strange and unwelcome and certainly not as I would expect "the best Mac ever" to behave - for such a price. As I said - it was not doing like that from the beginning, but was spoilt like this some time ago. What can be the reason and how to bring it back to normal functioning ?

It's new and it seems as if you are having hardware problems - take your machine to your local Apple Store or an AASP and have them diagnose and fix the problems. Could be logic board related since it's happening with both ports.
Good luck,
Clinton

My iphone 4 after ios 5.1 update. had error updating.my phones now in recovery mode now.usb to itunes.keeps saying!itunes doesn't recognise phone ,after update done now error.i recall doing a firmware update for the old 5.0 update.happened again.i recall

my iphone 4 after ios 5.1 update. had error updating.my phones now in recovery mode. usb to itunes when switched on.doesnt recognise. after update done.yes updates itunes.trued different usb ports. etc . for restore .but nothing.says my phones backed up in preferences.on itunes.but can get back up.i recall doing a firware update for the last os 5.0 update..but forgot where the link was .do i have to buy a new phone ?

UPDATE: I attempted to bypass activation using the emergency call 112 to get into the homescreen, but the call failed, in fact, even 911 will not go through and give me a call failed. (before you yell at me for dialing 911, I'm a firemedic )

HP Photosmart 7525 error 0x6100004c

I have a new HP Photosmart 7525 printer that is less than 4 months old. All of a sudden I started to see General printing error 0x6100004c on my product screen.
I looked at the solution suggested in the previous posts to remove the cartridges but when I open the cartridge access door, I am not able to access the cartridges as they stop only to the right corner where they are covered with plastic. They dont move to the center.
Please let me know what to do to solve the problem.
Thanks!!

Hello rakasi,
Welcome to the HP Forums!
I understand you're receiving an error stating "0x6100004c" using the Photosmart 7520. I will do my best to assist you! Please make sure this printer is plugged into a direct wall, not a surge protector. I just want to see if this makes a difference.
Follow this entire HP document on 'Ink System Failure' or a '0x...' or a 'C2...' Error Message Displays on the Front Panel. If you're receiving the same error message, then please contact HP technical support for further assistance. Click here to find out: HP Worldwide Contact.
Good luck.
I worked on behalf of HP.

IPhoto 11 does not see thumb drive when inserted into USB Port, 9 did.

I updated from iphoto 9 to 11 and updated to OSX, Previously when a usb thumb drive was inserted iphoto would see it, now irt does not, anyone have any hints for me?

Well here's the first problem:
The drive is in MS-DOS (FAT) format (a 500Gb Lacie).
iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, saving edits and sharing the photos. So, get the Library onto an appropriately formatted disk.
If you're thinking of reformatting that disk, remember that doing so will erase it, and so make sure you back it up first.
I would try open the Library from an appropriately formatted disk. If the issues persist them try the rebuild with Library Manager again.

Can't print to HP Photosmart C5180. getting error mssg that says, "Because a USB device was drawing too much power from your computer, one or more of our USB devices have been disabled." Never seen this before. How do i fix this?

can't print to HP Photosmart C5180. getting error mssg that says, "Because a USB device was drawing too much power from your computer, one or more of our USB devices have been disabled." Never seen this before. How do i fix this?

Get a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Error when inserting or changing in a sorted table

Hi Experts,
When i am executing a webdynpro application it says Error when inserting or changing in a sorted table. Can any one help for this.
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_CATEGORY_LIST of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: IF_COMPONENTCONTROLLER~GET_CATEGORY_LIST of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: WDDOMODIFYVIEW of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_MODIFY_VIEW of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: DO_MODIFY_VIEW of program CL_WDR_DELEGATING_VIEW========CP
Method: MODIFY_VIEW of program CL_WDR_VIEW===================CP
Method: DO_MODIFY_VIEW of program CL_WDR_CLIENT_COMPONENT=======CP
Method: DO_MODIFY_VIEW of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
in ST22
Object Definition
DATA: lo_node                   TYPE REF TO if_wd_context_node,
        lo_node_info              TYPE REF TO if_wd_context_node_info,
        lo_element                TYPE REF TO if_wd_context_element.
Additional Data declarations
DATA: lv_key TYPE string.
Get context node.
lo_node = wd_context->get_child_node( name = 'DROPDOWNLISTS' ).
lo_node_info = lo_node->get_node_info( ).
Call method to fetch the categories.
CALL METHOD cl_hap_wd_start_page_ui=>category_get_list
    EXPORTING
      add_on_application = add_on_application
    IMPORTING
      t_categories       = lt_categories.
Append Default selection entry 'All'.
lw_category-category_id = '00000000'.
lw_category-category_name = 'All'.
APPEND lw_category TO lt_categories.
Sort table after appending the new entry.
SORT lt_categories ASCENDING.
Loop through the category list and populate key(category_id) value(category_name) pair for
LOOP AT lt_categories INTO lw_category.
    lw_key_value-key = lw_category-category_id.
625     lw_key_value-value = lw_category-category_name.
>>>>>     APPEND lw_key_value TO lt_key_values.------>Here it throws an error
627     CLEAR: lw_key_value, lw_category.
628   ENDLOOP.
629
630 * Bind the category key-value pair to the context attribute.
631   CALL METHOD lo_node_info->set_attribute_value_set
632     EXPORTING
633       name      = 'CATEGORY_LIST'
634       value_set = lt_key_values.
635
636 * Make the entry 'All' as default selected.
637   CALL METHOD lo_node->set_attribute
638     EXPORTING
639       value = '00000000'
640       name = 'CATEGORY_LIST'.
641
642 ENDMETHOD.
643
644 method GET_EMPLOYEES.
645

Hello Durga,
from the error what I understood is lt_key_values is a sorted table and you are trying append a new line to it. Incase of sorted table you need to use the INSERT statement and not the APPEND statement.
INSERT lw_key_value INTO table lt_key_values.
BR, Saravanan

Error when inserting Web Dynpro script in Adobe form

Hi
In my WD component in one of the view I have an ADOBE form (Online scenario) and a button to save data into backend. In the ADOBE form everything is working properly, however the problem is when I click on the button to save, Its not getting into my action code. Even I am not getting any error other than the wait symbol.
In the form I have taken ZCI layout but when i'm inserting Webdynpro Script its showing an error 'Error when inserting Web Dynpro script'.
Please let me know why this error is getting.
Thanks
Ram

Hi Ram,
I hope you help me,
I have the same error, when I insert a web Dynrp Script, what version of SAPGUI do you use?
Thanks

When insert my lexar USB flash drive I get the message that the disk was not readable by this computer. It has worked previous to this and I do not want to lose the data by reformatting the drive. How can I reformat this drive and not lose my data?

When insert my lexar USB flash drive I get the message that the disk was not readable by this computer. It has worked previous to this and I do not want to lose the data by reformatting the drive. How can I reformat this drive and not lose my data?

You can't reformat it and not wipe everything on it.
Have you tried a different USB port?
Only other option, back it up on a different computer.

Error when inserting Web Dynpro script

Hello,
I am trying to create a new form using fields from KNA1 and am using ISR controls. When I try to insert Webdynpro scripts i get message "Error when inserting Web Dynpro script" Message no. FPUIFB094.
Has anyone faced this error? no notes are available regarding this and in SDN.
Regards
Prasad

It must be atleast ALD 7.1. Check this [Thread|Re: Problem on Button; having the same issue. Also check the SAPNOTE 962763.

I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, it is throwing error "The product distribution file could not be verified. It may be damaged or not signed".

I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, the App Store is throwing error "The product distribution file could not be verified. It may be damaged or not signed".
Is there anything I should do differently? Is anyone else facing the same issue?
Kindly help.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

" Error when inserting in PSA table RSTSODSPART" when loading into PSA

Hello,
Did anyone encounter something similar, and found a solution ?
BI 7.0 - EnhP 1 - SP5
When loading data from R/3 into PSA, we encounter following error message:
" Error when inserting in PSA table RSTSODSPART"
===============================================================
- the first datapackage is written successfully to PSA,
but from the second datapackage onwards the error message pops-up
" Error when inserting in PSA table RSTSODSPART"
- The original dataselection in the infopackage is somewhere stored
If the selection in the InfoPackage is reduced (e.g. only one document i.o. a period)
it stil starts loading according the original selection (the month)
- If we create a new InfoPackage and select very few data (only one datapackage)
then we can load to PSA succesfully, but when we load to DSO we can't activate the DSO.
- We remarked that:
Two versions of the PSA exist for that datasource 0FI_GL_40:
a Table(/BIC/B0000555000) in version 1 exists,
a Table(/BIC/B0000555001) in version 2 exists
Thanks in advance,
Best regards

Hello All,
We had a problem similar to what Ilse Depoortere describes. The problem happens in our BW QA system a few days/weeks after it has been copied from Production. Data loads start failing with these two error messages:
RSM2 851 - Error when writing in PSA (Caller 32)
RSAR 130 - Error 7 when adding to PSA (Caller 70)
We have just implemented the fix described in note 1340371 (replaced the LIB_DBSL with patch level 247), and the problem is gone. Failed data load process chains can be restarted and finish successfully.
This has been a really useful discussion, thanks all! And thanks to my coworker Bob who found it.
Vince Vajda

Error when inserting a new record (Ctrl+Down)

Hello,
[http://img402.imageshack.us/my.php?image=12846351.jpg]
Here the problem is : when i press Ctrl+Down (Insert new record), i enter data into all those fields, but i got an error
Cannot Insert Record ("ROGER"."NUME") cannot be null (roger is my username which i logged on). And i completed all fields
Also, when inserting data into fields, when i click on another field, it points me back automatically to the last completed field, then when i click again on the next field, i can enter data in that field. why the cursor cannot be on the next field when i first click there?
i changed the property of the items Required = No (but however, in the database cannot be null).
Please help if you can.
Thanks

For your other issue, with null fields on your forms.
have you ever tried to log those fields value into a log table?
A better and simple idea is:
Create a temp table, with four columns: seq, section, message, type
Where section is the column to condition any search you want to make
message is the column to write anything you want
type is the column which holds the tpe of the record, like info, debug, warn, etc.
then create a database procedure
this procedure must recieve the section, message, type and insert them into the log table and do commit.
in yiour pre-insert trigger [forms level] or in your when-button-pressed or even better on your on-commit trigger [forms level]
write the following code:
begin
database_procdure('MY_FORM_NAME', 'THE VALUES ARE: 1='||:1||' 2='||:2||' 3='||:3, 'INFO');
end;
After that you can do a select in your sql*plus with the following statement:
select *
from temp_table
where selction like 'MY_FORM_NAME';
then you can track if any of the values you think is null or has a value, in fact, has a value.
best regards,
Abdel Miranda
AEMS Global Group
Panama

Photosmart 7525 now errors when insert USB thumbdrive (error B8BD3348)

Similar Messages

Maybe you are looking for