Photosmart 7660 printing blank page when using Microsoft word 2007

I have a Hp photsmart 7660.It will print a Test page ok-it will print some of the text in an email.That is the heading and the end, but not the message in the middle of the email. When I write a document in Microsoft Word or Works the printer will go through the motions of printing but all I get is a blank page.
I have uninstalled and reinstalled using original disk and also tried the same using Hp software download all to no avail.
The utility diagnostic says there is no problem everything is working well,but of course it is not. Can anyone help me to resolve this problem please.

I tried this but didnt work for mr. Can you help? How did you PDFed??
It works for me in Word 2010 (or later) using Save As PDF. It did not work in Word 2007 using the Adobe Acrobat PDF printer nor using Word 2007's save as pdf utility. (The hyperlink showed up but was not active.) It did work using the Acrobat tab in Word
2007 (this requires Adobe Acrobat).
I did this by:
first creating the text box with the hyperlink in the body of the document and moving it into the footer area (but still not in the footer itself).
Then I used the Format tab of Text Box Tools and the Postion button (More Layout Options).
I gave it an absolute vertical position relative to the page.
Then I cut the text box, went into the footer, and pasted it there.
It might have worked to just create the text box in the footer itself.
I personally prefer it that the header and footer are not part of the active page when I am typing. This hyperlink is not clickable in Word without going into the header/footer view and I'm fine with that. The QAT workaround is just fine.
Charles Kenyon Madison, WI

Similar Messages

Why does my hp photosmart 7520 prints blank pages

Why does my HP Photosmart 7520 print blank pages?

Sorry to ask an obvious question - but are you putting the paper in the right way? I have a 7520, and as long as there is ink in it, and the paper is facing the correct way, and I hear the print job go to the printer, it prints fine.
Are you hearing the pringing attempting to print?
GB

Printer prints blank pages when I turn it on

When I turn my printer on it starts to endlessly print blank pages for no reason. I have checked the print log and there isn't anything waiting to be printed. I have reset the printer, unplugged the power supply, and reset my computer. None of this worked. I have a HP PSC 1410 All-in-one.

Have you tried disconnecting the printer from the computer?
1. Power off the printer.
2. Disconnect the USB cable from the back of the printer.
3. Power on the printer.
Does it still print continously?
Binary_Zen (worked at HP )
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem

Photosmart C7280 prints blank pages

My C7280 started printing blank pages between pages. I use this printer as wireless. Sometimes it won't print until I go to add printer again. After this last episode it started printing blank pages. I downloaded the file listed in post below for 7260 but it didn't resolve the issue. I went on their troubleshooting page and did as it suggests with the separator page. That didn't fix it either. Any other suggestions? Thanks ahead of time for any help.

Hello jprrpj,
Welcome to the HP Forums.
I see that you are having an issue with the printer printing out blank pages.
I suggest that we start off by clicking on the following link for Troubleshooting Print Quality Issues.
Write me back if you are still having an issue or if you have any other questions.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Photosmart 5510 printer model #B111A when using touchscreen apps i cannot connect to the server

Photosmart 5510 all-in-one printer, model #B111A, windows XP----i can print from the computer, but when i try to use the apps on the touchscreen i get a message error "cannot connect to the computer"

The steps below typically resolve the issue you’re experiencing:
1. Unplug the power cord from the back of the printer.
2. Unplug the power cord from the back of your router (and modem, if separate from the router).
3. Wait 20 seconds, then plug the router (and modem, if applicable) back in.
4. Wait 30 seconds, then plug the printer back in and power it on.
5. Press the ePrint button on the printer's front panel, and it should try to connect to Web Services again.
Those steps usually resolve the issue, but if it still occurs you can try setting static network info for the printer (which sometimes helps to stabilize the printer's ability to get outside of your network, to the internet):
1. Press the wireless icon at the top of the printer's screen and note the IP address.
2. Enter the IP address into the address bar of a web browser on a computer and press enter or click the browser's go button.
3. The printer status page should be opened. Click on Network at the top.
4. Click on Networking on the left.
5. Select Proxy Settings.
Note: If you are prompted for a redirect, select OK. If you receive a certificate warning, select the option that lets you continue anyway.
If you receive a Internal System Error, refresh the page until it loads the proxy settings.
6. Verify that all fields are blank. If they are not, clear them and make sure the Proxy Server requires authentication is unchecked and click apply. You should get a success message.
7. Click on Network Address (IP) on the left.
Note: If you only see IP Address Configuration and DNS Address Configuration with a yellow note, refresh the page until it loads completely.
8. Leave the IP Address Configuration as Automatic IP.
9. Change DNS Address Configuration to Manual DNS server.
10. Enter 8.8.8.8 for the Manual Preferred DNS Server and 8.8.4.4 for the Manual Alternate DNS Server.
11. Click Apply and you should get a success message.
12. Power off the printer for 30 seconds and then turn it back on to force the new settings to take effect.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

T500 and HP Photosmart 7350 - prints blank pages

I've done a search but can't seem to find anything. When I try to print it goes through the motions but pops out a blank page. I've uninstalled and reinstalled with the latest driver from HP. It prints a test page OK directly using the printer's buttons and through the HP software. It won't print when I reinstall and click the "Print Test Page" button. It also prints a test page when it recalibrates the cartrideges. I've tried different cables and connecting to different USB ports; makes no difference. Anyone have this problem?

Sorry to ask an obvious question - but are you putting the paper in the right way? I have a 7520, and as long as there is ink in it, and the paper is facing the correct way, and I hear the print job go to the printer, it prints fine.
Are you hearing the pringing attempting to print?
GB

AR Invoice Printing Blank page when printed through printer

Hi,
I customized AR invoice to give PDF output through BI Publisher.There is no issue when tried to view the output.
When tried to print the output through printer, It's given blank page.
All other BI publisher reports which will give PDF output in Straight single request are printing through printer correctly.
But AR invoice By standard program itself when fired, First a Multi Language Function will fire which will have output of 0 bytes and after that as a child request Original program with Required output will fire.
It seems that printer is printing Parent request output.
Can anyone please help me regarding this.
Thanks in advance,
Best Regards,
Mahesh

Hi,
I'm guessing the concurrent program is outputting text (character mode) as opposed to PDF?
This could be a number of reasons:
1. Printer driver issue, e.g. the number of lines printed on the page is more than is defined for the printer driver: Try reducing the "Rows" on the current program definition
2. Printer PRT issue, extra page break could be being inserted.
3. The "box" in the report definition containing the address could be being expanding due to the extra address line, but not enough space so it forces a new page to be printed.
Gareth
Blog: http://garethroberts.blogspot.com
Web: http://www.virtuate.com

Blank page when using Interactive Forms(Webdynpro thru Java)

While i was running the application using Interactive Forms iam getting Blank page.
Previously when i try to view the output, i can able to view it without any errors,suddenly what happened is iam knowing.
ADS was perfect,CredentialRights there,AdobeReader-7.0,ACF with SP11 installed and Active-X Controls Enabled.
Can i know where the problem exactly is?Is the problem from client side or server side or do i need any settings for IE6.0?

Hi Sankar,
Did you use NW04 SP11 before (with ACF) and upgraded to NW04<b>S</b>? Your ACF version you mentioned is for NW04S and not for NW04.
Also keep in mind that SAP changed the way Adobe forms are displayed (ACF will be replaced by the ZCI layout) - ZCI stands for Zero Client Installation. If you upgraded to 04S, you might need to change your forms as well (also the WD application).
On your interactive forms application (the webdynpro) are there any links outside the adobe form? What happens if you click on it? At our side we have created a customer message, since the ZCI form is not being displayed. We also get a white Adobe placeholder, and when we click on a link outside the placeholder, we see the Adobe PDF logo being displayed in the placeholder (placeholder = frame).
In your case: do you see a small red cross icon in the frame? That means ACF is not installed properly.

Printing Blank Page When Address line 2 or 3 is Present

Hi all,
I am running a custom report in Oracle Applications (11.5.10.2) from the Payables Manager responsibility and whenever there is an additional address line apart from address line1, the report prints a blank page in it's output, although I cannot see the blank page in the preview. This happens when I try to print the report output from the 'options' tab of the concurrent request window to any printer I select from the drop-down list. When I run the report without the print option, the report does not display any blank page in the output window.
Thanks,
Nav Gag

Hi,
I'm guessing the concurrent program is outputting text (character mode) as opposed to PDF?
This could be a number of reasons:
1. Printer driver issue, e.g. the number of lines printed on the page is more than is defined for the printer driver: Try reducing the "Rows" on the current program definition
2. Printer PRT issue, extra page break could be being inserted.
3. The "box" in the report definition containing the address could be being expanding due to the extra address line, but not enough space so it forces a new page to be printed.
Gareth
Blog: http://garethroberts.blogspot.com
Web: http://www.virtuate.com

Bookmark tree structure using Microsoft word 2007 not creating properly

I have a word document file in MS office 2007. When i am converting the word document to a PDF file using the HEADING option , the bookmarks tree structure in the PDF file is not created properly. Means that the between content of a topic is also read
as a bookmark heading while conversion. Only the heading of a topic should be read as a bookmark and the sub heading as a sub-bookmark but the content should not come in the tree structure of bookmarks in a PDF file..
For Example:- if MICROSOFT is the heading of any xyz.doc then it should be the parent bookmark. . but in my case , MICROSOFT is coming as a bookmark but the content inside this is also created as a bookmark..
So my question is that what is the internal structure of the of the MS word 2007 to convert a doc to a PDF file???
Because it is not creating the bookmarks tree structure properly...and taking the content randomly from the middle of a topic and adding it in the bookmark tree structure...(which should not happen). The font throughout the doc is the same and aligned properly..so
why it is randomly taking the between text as a bookmark...???
what is the root cause of this bug..?? how can this problem be solved..?? is there any sort of change have to be done in my word doc.?
i need an urgent help regarding this...
NOTE:- I am using MS office 2007.

I tried this but didnt work for mr. Can you help? How did you PDFed??
It works for me in Word 2010 (or later) using Save As PDF. It did not work in Word 2007 using the Adobe Acrobat PDF printer nor using Word 2007's save as pdf utility. (The hyperlink showed up but was not active.) It did work using the Acrobat tab in Word
2007 (this requires Adobe Acrobat).
I did this by:
first creating the text box with the hyperlink in the body of the document and moving it into the footer area (but still not in the footer itself).
Then I used the Format tab of Text Box Tools and the Postion button (More Layout Options).
I gave it an absolute vertical position relative to the page.
Then I cut the text box, went into the footer, and pasted it there.
It might have worked to just create the text box in the footer itself.
I personally prefer it that the header and footer are not part of the active page when I am typing. This hyperlink is not clickable in Word without going into the header/footer view and I'm fine with that. The QAT workaround is just fine.
Charles Kenyon Madison, WI

Photosmart C6150 printing slow even when using printer controls

It started out intermintently printing slow using the PC and the front panel copy button, as if it was switching into high resolution mode. I checked the driver / printer prefrences and found nothing in high resolution mode. Recently we have been doing alot of copying from the front panel, not from the computer software, and it got worse. I checked the quality setting in the printer and even set it to fast. It would then print a semi-fast sheet (as if it was fighting itself to print faster but couldn't), then a fast sheet, then the next sheet would be slow again. After a few times of doing this, it finally stopped printing normal or fast and now it's stuck in high res slow printing mode. I printed a self test diagnostic page and it printed in less than 60 seconds and showed nothing. I have also chaned out the drivers on the PC and still nothing. Could it be a firmware issue and is that something I can flash?

Hello , Welcome to the HP Community. I hope you have a pleasant experience here. I understand you are having an issue with slow printing on your HP Photosmart C6150 All-in-One printer. I'd love to help you with this. First, I'd like you to try printing a self test page again: HP Photosmart C6100 All-in-One Series - Printing the Self-Test Diagnostic Page If the test page printed in less than 60 seconds, then I would suggest following the steps here to troubleshoot the driver and settings on your computer:HP All-in-One Printers - Slow Printing in Windows: Computer Issues If the issue persists after these steps, I'd recommend replacing your USB cable (with a smaller one if it is over 6ft long). If the test page took longer that 60 seconds to print, then I would suggest following the steps here to troubleshoot an issue you may be having with the printer hardware:HP All-in-One Printers - Slow Printing in Windows: Hardware Issues Another thing I would suggest, if the printer is slow even from the printer, would be to make sure the printer is plugged directly into a wall outlet. The printer does have a power moderator built in, so when plugged into a power surge or battery backup, it can often not get enough power. Please respond to let me know if these steps help to resolve your issue!Have a great day.

HP PSC 1410 printing blank pages

I have recently installed windows 7 (32 bit) on my Asus G50 laptop. First thing i did was installing all the latest drivers from the HP website including the HP solution centre and other software. Now here's my problem:
Whenever i try to print anything through 3rd party software (i.e. browsers, Word, Notepad etc.) my PSC 1410 'prints' blank pages. The reason i say print is because i can hear the printerhead moving as if it was really printing and the paper gets pulled through in short steps like it normally would. There is however no ink on the pages.
Now here's the weird thing. When i check my ink levels in the solution centre, both color and black are over 75%. It get's even better now: When i use solution centre to print a test page or clean out the inkcartridges it works fine! It seems like all programs outside of HP software have problems communicating somehow.
i'm pretty sure i have the latest drivers installed (downloaded them 3 days ago). I'm running the 32bit version of Windows 7, kept nicely up to date, on an Asus G50v notebook. some technical specs for the lovers:
Intel Core 2 Duo T9400 (2.53 GHz)
Nvidia GeForce 9700M GT
4GB DDR3 RAM

Hello MPQCNC,
I seen your post on having issues with your Photosmart C7280 printing blank pages. I would like to help you.
I have located a troubleshooting document that I recommend you follow to help resolve the problem.
Troubleshooting Print Quality Issues
I hope this helps you, if you have any other questions please feel free to respond.
Take care,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

OfficeJet 4110 Using Microsoft Word 2003

The printer is attached to computer with USB; trying to print sheets of labels using Microsoft Word 2003 mailing merge.
It will only print 1 address on 1 label at a time.
How do I set the printer to print a sheet of labels with different addresses on each label?
Thank you!

As I stated in my previous post, I reverted back to Adobe 7 on the computer
I use every day, but I apologize for not mentioning another alternative. I
still needed the ability to read Adobe 9 files that I could not open with
Adobe 7 and I still needed the ability to complete fillable PDFs that would
not fill with Adobe 7, so instead of requesting a refund (which you already
know is a pain in the behind), I installed Adobe 9 on a newer computer at my
office that is running Windows 7. For some reason, the problems with MS Word
2003 do not occur when running Adobe 9 in Windows 7 environment. So, when I
have an Adobe file I cannot read or fill, I have the person who uses that
computer, read or fill that Adobe file for me. I did not upgrade to Windows
7 on the computer I use every day because "Act! for Advisors" which I use
for my work is not very compatible with Windows 7 unless I upgraded that
program, too. I don't know about you, but I avoid upgrading my operating
system until I absolutely have to because the transition has always been
very time consuming and quite an ordeal for me.

When processing a Microsoft Word 2007 document into PDF format. How do I get the bookmarks to display the Word autonumgl fields

Acrobat pro does not display autonumgl fields in the bookmarks panel. Have you achieve this?

Hi Leonidas,
The AutoNumLgl field numbers paragraphs for legal and technical publications. This field is considered obsolete but is provided for compatibility with Microsoft Word 2000 and earlier versions.
Microsoft recommends that you use the ListNum field in place of the AutoNumLgl field when using Microsoft Word 2013, Word 2010, Word 2007, (Ref. Field codes: AutoNumLgl field - Word )
This is a known issue with Acrobat failing to convert the AutoNum fields.
Regards,
Rave

When I select print from any website article while in Firefox it only prints a blank page. When I open same web pages using Safari, they print fine. Documents in other appliations print fine. Only Firefox documents print blank page.

When I select print from any website article while in Firefox it only prints a blank page. When I open same web pages using Safari, they print fine. Documents in other appliations print fine. Only Firefox documents print blank page.

Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running Mac OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of Mac OS X, select Go ▹ Go to Folder… from the Finder menu bar and enter “~/Library” (without the quotes) in the text box that opens.
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.

Photosmart 7660 printing blank page when using Microsoft word 2007

Similar Messages

Maybe you are looking for