Photosmart B010a All In One test print O: K: Does not print from the computer

Egr: Sig. No error message in the control panel is READY, has printed the test. DO NOT print from your computer. HP Computer in 6220 with window 7/64 bit. = tiscali WI Fi network. the printer is connected with the cable to the computer. I also tried with Doctor. Please help me figure out where I went wrong; I installed the latest type of software and drivers available. Thank you, Regards Costanzo
photosmart All In One B010a stampa di prova O:K: non stampa dal computer
Egr: Sig. Nessun messaggio di errore nel pannello di controllo risulta PRONTA , ha stampato la prova. NON stampa dal computer. Computer HP a 6220 con window 7 /64 bit. rete = tiscali WI Fi . la stampante è collegata con il cavo al computer . Ho provato anche con Doctor . Per favore aiutatemi a capire dove ho sbagliato ; ho installato l'ultimo tipo di software e driver disponibile . Grazie, Distinti Saluti Costanzo
This question was solved.
View Solution.

try to connect the printer with your laptop with USB connection.
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
I work on behalf of HP.

Similar Messages

Photosmart C6180 All-In-One...Black Ink will not print...the page is almost blank

The Printer seems to work correctly, but the page is almost blank. The only exceptions are a few faint characters, and sometimes a light line down the side of the page. Can you please help? The printer has not had much mileage.
Thanks,
Ross

I ran all those tests and did all the upplugging, turning off, etc. Do not think is a software / connection problem. Somehow I think the issue is in the black print head. All ink levels are very good. In the past, I have been running the printer with the print settings in the software at ... print in Greyscale / Black Only. Though the old black cartridge showed plenty of ink, I put in a new black cartridge and that is not the problem.
Even when I put a paper on the glass to copy and use the black copy button, it prints very faintly...almost not even there. Yet when I copy by pushing the Color Copy button on the printer and use a color original, colors seem to show up better.
I have used the tool, clean print heads, several times. There is a lot of ink in the squares, but it is all color. My gut is somehow the black print head is still plugged, or something like that. Though it says to use the "clean print heads" sparingly because it uses up ink, I saw in the self help to do this 3 times or more.
What can I do to get the black print head to print? I appreciate your comments. My wife is ready to toss it and move on.
Hope you have a good weekend.
Thanks,
Ross

I have a hp photosmart 5510e all-in-one. IPhone 3Gs &ipad1 will not print

After changing the ink in the hp photosmart 5510eall-in-one printer I was unable to use the print function on my iphone3gs and ipad1. But my husband is able to print off his iphone4 and iPad 2. I'm running ISO 5.1 and is updated. My printer worked fine this morning. Got any ideas? Thanks hosey54

Hosey54;
I hope you are doing well and sorrry to learn that you are having this issue;
What Application are using to print?
Is the iphone 3gs or the ipad 1 gving any errors?
Let's perform a reset;
Follow these steps to perform a reset of the product.
Press the Power button ( ) to turn on the product.
With the product turned on , disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button ( ) to turn it on.
Here there are some troubleshotting steps is you are using Airprint or Hp eprint home and Biz;
Click here.
Hope this helps and let me know if I can be of any further assistance
Best of luck;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

HT3669 HP ENVY 4500 e-All-in-One Version 3.2.1 does not work on iMac 20-inch, Mid 2007. Only recognizes scanner not USB printer.

HP ENVY 4500 e-All-in-One Version 3.2.1 does not work on iMac 20-inch, Mid 2007. Only recognizes scanner not USB printer.
I would like to print via the USB connection instead of wireless (the wireless does work, and the scanner works via USB).
I tried connecting the printer directly (via USB) to my MacBook Pro laptop and it worked just fine.
How can I make this printer work on my iMac?
I spent 4 hours on the phone with HP and we did every combination of installation of drivers ad nausum and their bottom line is that it is a Mac problem.
Any help would be appreciated. Will be sending this printer back to Amazon if I can't make it work on the USB.
I am open to questions or suggestions
Thanks,
Chet

After 4 hours on the phone with HP and another hour with Apple (Mavericks support) no real solution other than check everything (removed everything from Login Items, removed all HP software anywhere in the system reboot, reinstall printer) then when nothing worked for the 4500, did an OS Reinstall (boot with CMD+R).
The Mavericks support group did open an incident (# 542875311) and I will update it when I figure out how to find it on the system.
My feel is that the base problem is that somewhere between the HP-Inkjet-SW-OSX-Mavericks_v12.34.49-2 package and the Apple HP Printer software in the Library (version 2.16.1) the app for printing via the USP Port just does not get installed for the mid 2007 20 inch iMac. The scanner is recognized on the USB Port and the Printer works fine on Wi-Fi. I have too many devices to burden my home network with anothe device. Also, every time I put any HP Printer on Wi-Fi, my router (Netgear N600 WNDR3400 running 12 to 20 devices depending on who is home) gets wonky (but that's anothe story...).
Additionally, when I attach the HP Envy 4500 to my MacBook Pro (2010) it works perfect - print and scan via the USB prot and both functions show in the System Preferences - Printers and Scanners just as expected and just as the 3050 does.
Chet

I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

This can be the result of selecting the wrong driver. An older, unsupported laser printer will sometimes work with the generic Postscript driver.

I have an HP Photosmart C7250 All-in-one - Test Report - The wireless radio is not functioning

I have an HP Photosmart C7250 All-in-one and the wireless feature does not work. When I try to go through the Wireless Setup WIzard, the Test Report indicates the following - "The wireless radio is not functioning. Contact HP Support". Can you help me?

Let's reset the printer. Turn it off, hold the # and 6 keys while turning it back on. Go to Setup > Network > Wireless Network Test afterward to see if it worked.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Acrobat 9 bug? - Print Pages function does not print all bookmarked pages

We use the Bookmark Print Pages function to allow for easy printing of sections of large PDFs. All of the pages that should be printed are bookmarked. The bookmarked pages print correctly in Adobe 8, but not in Adobe 9.
I have put together a javascript workaround, but would prefer a solution that does not require distributing a file to all users.
I would appreciate any suggestions on other possible workarounds.
Here is the bug report I submitted to Adobe:
Concise problem statement: The "Print Pages" function for bookmarks does not print all bookmarked pages in Adobe Reader 9.0 and 9.1. The same bookmarks print properly in Adobe Reader, Standard, and Pro 8.
Steps to reproduce bug:
1. Open the Adobe Acrobat SDK JavaScript for Acrobat API Reference PDF (Version 8.1, April 2007) in Adobe Reader 9.0 or 9.1.
2. View the bookmarks. Right-click on New Features and Changes and choose "Print Pages."
3. Open the same PDF in Adobe Reader, Standard, or Pro 8. (I used Adobe Professional 8.1.3.)
4. View the bookmarks. Right-click on New Features and Changes and choose "Print Pages."
Results and Expected results: Printing from v8 results in 12 pages. Printing from v9 results in 9 pages. Pages 741, 754, and 769 did not print from v9.

I'm having the same issues. Using the latest version 9.3.3. Is this a bug? I tired calling adobe but their CR sounds like 3rd country only. Anyone can shed a light on this issue?

Manual feed tray 1 on printer HP 4015TN does not print unless I hit the OK button.

I have an HP 4015 Tn which was working fine up until 3-4 weeks ago. The problem is when I send a document to the manual-feed tray one, it flashes the "Attention" red indicator and I have to hit OK button on the printer for the document to print.My printer is setup for envelope, letterhead in tray 1, letter plain in tray 2 and legal in tray 3.My PC is a 64 bit running Windows 7 with the latest updates.Any suggestions in how to correct this problem will be greatly appreciated.Thank you

Hello l_j, Welcome to the HP Forums. I see that you're having an issue with blank pages when attempting to print with black ink. Please click on the following link that deals with Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Photosmart 5520 and Deskjet Ink Advantage 5520 e-All-in-One Printer Series. If the troubleshooting does not help resolve your issue, I would then suggest contacting HP's Technical Support to see about further options for you. , : click here. Thanks for your time. Cheers,

Windows Server 2012 R2 - ALL HF's Failing to install as "Does Not Apply to this computer"

Hi,
A general question about hot fix installs.
I have multiple servers that are all Windows 2012 R2. They do not have internet connections, so I have to install the Hotfixes manually. I download the HF's from the ISO download page (https://support.microsoft.com/en-us/kb/913086) every month. I collect them and install in a bulk install during a release cycle ( a couple times a year). I just realized that NO HF's have installed since JUNE 2014. Every HF that shows up in WindowsServer2012R2 directory fail to install with a message of "The update is not applicable to your computer". Which is fine if that was true, but.... I get this message for every HF from the ISO's since June 2014. NOT one HF thinks it is applicable to my computer. Could that be the case? No HF's apply to my Server 2012 systems since June of 2014?
This is my system info, and below that is the results from attempting to install 95 HF's.
C:\TEMP>systeminfo
Host Name: MYHOST
OS Name: Microsoft Windows Server 2012 R2 Datacenter
OS Version: 6.3.9600 N/A Build 9600
OS Manufacturer: Microsoft Corporation
OS Configuration: Member Server
OS Build Type: Multiprocessor Free
Registered Owner: Windows User
Registered Organization:
Product ID: 00252-80025-36226-AA727
Original Install Date: 6/13/2014, 8:04:39 AM
System Boot Time: 3/16/2015, 2:34:45 PM
System Manufacturer: Dell Inc.
System Model: PowerEdge R720
System Type: x64-based PC
Processor(s): 2 Processor(s) Installed.
[01]: Intel64 Family 6 Model 62 Stepping 4 GenuineInt
el ~2500 Mhz
[02]: Intel64 Family 6 Model 62 Stepping 4 GenuineInt
el ~2500 Mhz
BIOS Version: Dell Inc. 2.2.2, 1/16/2014
Windows Directory: C:\Windows
System Directory: C:\Windows\system32
Boot Device: \Device\HarddiskVolume1
System Locale: en-us;English (United States)
Input Locale: en-us;English (United States)
Time Zone: (UTC-07:00) Mountain Time (US & Canada)
Total Physical Memory: 262,099 MB
Available Physical Memory: 249,337 MB
Virtual Memory: Max Size: 301,011 MB
Virtual Memory: Available: 288,015 MB
Virtual Memory: In Use: 12,996 MB
Page File Location(s): C:\pagefile.sys
Domain: mydomain.sgn
Logon Server: \\MYHOST
Hotfix(s): 25 Hotfix(s) Installed.
[01]: KB2862152
[02]: KB2868626
[03]: KB2876331
[04]: KB2888505
[05]: KB2892074
[06]: KB2893294
[07]: KB2893984
[08]: KB2898785
[09]: KB2898868
[10]: KB2898871
[11]: KB2900986
[12]: KB2901125
[13]: KB2901128
[14]: KB2909210
[15]: KB2909921
[16]: KB2912390
[17]: KB2916036
[18]: KB2919442
[19]: KB2922229
[20]: KB2923392
[21]: KB2925418
[22]: KB2930275
[23]: KB2931358
[24]: KB2931366
[25]: KB2936068
Network Card(s): 6 NIC(s) Installed.
[01]: Broadcom BCM57800 NetXtreme II 10 GigE (NDIS VB
D Client)
Connection Name: ISCSI
DHCP Enabled: No
IP address(es)
[01]: 192.168.1.30
[02]: fe80::38c9:e59c:5ac2:e0a1
[02]: Broadcom BCM57800 NetXtreme II 1 GigE (NDIS VBD
Client)
Connection Name: NIC3
Status: Hardware not present
[03]: Broadcom BCM57800 NetXtreme II 1 GigE (NDIS VBD
Client)
Connection Name: MGMT
DHCP Enabled: No
IP address(es)
[01]: 7.48.64.32
[02]: 7.48.64.30
[03]: fe80::f14e:9339:9326:c7fd
[04]: Broadcom BCM57810 NetXtreme II 10 GigE (NDIS VB
D Client)
Connection Name: SLOT 5 Port 1_swport_VMRepwan
DHCP Enabled: Yes
DHCP Server: N/A
IP address(es)
[05]: Broadcom BCM57800 NetXtreme II 10 GigE (NDIS VB
D Client)
Connection Name: NIC2
Status: Hardware not present
[06]: Broadcom BCM57810 NetXtreme II 10 GigE (NDIS VB
D Client)
Connection Name: SLOT 5 Port 2_swport_VMOpswan
DHCP Enabled: Yes
DHCP Server: N/A
IP address(es)
Hyper-V Requirements: A hypervisor has been detected. Features required for
Hyper-V will not be displayed.
I have a script that runs each HF install.. If I run them manually without the tool I get the same results so it is not the script..
Installing 95 patches
for Microsoft Windows Server 2012 R2 Datacenter x64
Repository path: U:\Patch Repository_4_1\2012_R2_HFs\
1. Windows8.1-KB2894852-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
2. Windows8.1-KB2894856-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
3. Windows8.1-KB2920189-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
4. Windows8.1-KB2926765-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
5. Windows8.1-KB2928120-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
6. Windows8.1-KB2931358-x64.msu patch status: ALREADY INSTALLED - SKIPPING
7. Windows8.1-KB2931366-x64.msu patch status: ALREADY INSTALLED - SKIPPING
8. Windows8.1-KB2933826-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
9. Windows8.1-KB2939576-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
10. Windows8.1-KB2953522-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
11. Windows8.1-KB2957151-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
12. Windows8.1-KB2957189-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
13. Windows8.1-KB2957689-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
14. Windows8.1-KB2961072-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
15. Windows8.1-KB2961887-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
16. Windows8.1-KB2962872-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
17. Windows8.1-KB2964718-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
18. Windows8.1-KB2964736-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
19. Windows8.1-KB2965788-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
20. Windows8.1-KB2966072-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
21. Windows8.1-KB2966826-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
22. Windows8.1-KB2966828-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
23. Windows8.1-KB2971850-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
24. Windows8.1-KB2972213-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
25. Windows8.1-KB2972280-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
26. Windows8.1-KB2973114-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
27. Windows8.1-KB2973201-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
28. Windows8.1-KB2973351-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
29. Windows8.1-KB2974008-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
30. Windows8.1-KB2976627-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
31. Windows8.1-KB2976897-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
32. Windows8.1-KB2977292-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
33. Windows8.1-KB2977629-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
34. Windows8.1-KB2978668-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
35. Windows8.1-KB2982794-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
36. Windows8.1-KB2982998-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
37. Windows8.1-KB2987107-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
38. Windows8.1-KB2987114-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
39. Windows8.1-KB2988948-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
40. Windows8.1-KB2992611-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
41. Windows8.1-KB2993651-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
42. Windows8.1-KB2993958-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
43. Windows8.1-KB3000061-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
44. Windows8.1-KB3000483-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
45. Windows8.1-KB3000869-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
46. Windows8.1-KB3001237-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
47. Windows8.1-KB3002657-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
48. Windows8.1-KB3002885-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
49. Windows8.1-KB3003057-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
50. Windows8.1-KB3003381-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
51. Windows8.1-KB3003743-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
52. Windows8.1-KB3004150-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
53. Windows8.1-KB3004361-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
54. Windows8.1-KB3004365-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
55. Windows8.1-KB3005607-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
56. Windows8.1-KB3006226-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
57. Windows8.1-KB3008923-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
58. Windows8.1-KB3008925-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
59. Windows8.1-KB3010788-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
60. Windows8.1-KB3011780-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
61. Windows8.1-KB3013126-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
62. Windows8.1-KB3013455-v2-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
63. Windows8.1-KB3014029-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
64. Windows8.1-KB3018943-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
65. Windows8.1-KB3019215-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
66. Windows8.1-KB3019978-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
67. Windows8.1-KB3020393-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
68. Windows8.1-KB3021674-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
69. Windows8.1-KB3021952-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
70. Windows8.1-KB3023607-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
71. Windows8.1-KB3036197-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
72. Windows8.1-KB3021953-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
73. Windows8.1-KB3022777-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
74. Windows8.1-KB3023266-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
75. Windows8.1-KB3023562-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
76. Windows8.1-KB3024663-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
77. Windows8.1-KB3029944-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
78. Windows8.1-KB3030377-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
79. Windows8.1-KB3031432-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
80. Windows8.1-KB3032323-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
81. Windows8.1-KB3032359-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
82. Windows8.1-KB3040335-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
83. Windows8.1-KB3033408-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
84. Windows8.1-KB3033889-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
85. Windows8.1-KB3034196-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
86. Windows8.1-KB3034344-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
87. Windows8.1-KB3035017-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
88. Windows8.1-KB3035034-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
89. Windows8.1-KB3035126-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
90. Windows8.1-KB3035131-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
91. Windows8.1-KB3035132-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
92. Windows8.1-KB3037634-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
93. Windows8.1-KB3039066-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
94. Windows8.1-KB3044132-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
95. Windows8.1-KB3046049-x64.msu patch status: DOES NOT APPLY TO THIS COMPUTER
Thanks,
Dave

Hi Dave,
Would you please check CBS lg file and other relevant event logs if find more clues? On current situation, please refer to following article and check if can help you.
Update is not applicable to your computer- but it is
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Testing model using UI does not open in the UI

I created a UI for a model and when trying to test it (using Test Model > Start a new configuration > Model UI (select the UI) > Finish), it does not bring up the UI, instead it shows the Configuration Summary page. I have checked the UI and it has the page flow defined properly. What is the reason for this and what is the solution. Thanks in advance.

Thanks Pankaj, the page flow mentioned in the UI was wrong. I modified it to the correct one. But, now when I test, an error page is displayed. This model has only one UI page.
Error Page
You have encountered an unexpected error. Please contact the System Administrator for assistance.
I have this issue with another model also for which there are 4 UI pages, while testing the first 3 display properly while the above error occurs on the last page.
Based on the above, it seems the error is thrown on the last page of the UI. Is there anything else I can check to resolve this issue? Thanks.

MY printer officejet7000 DOES NOT PRINT FULL A3 SIZE PAPER LIKE my prin cut for botam

MY printer officejet7000 DOES NOT PRINT FULL A3 SIZE PAPER my print cut for botam & top side, Same printout give in my old model printer like k7108 this printer printour full printing, but I newly purchase printer not printour full a3 size print

Those '''user_pref("print.printer_Artisan_837 ....''' preferences are what needs to be deleted, with Firefox closed.
I think that "ding-dong" error sound might be due to an old print job stuck in the print cache, though. Open the Windows Control Panel > Printers and Faxes and check the '''Status''' for that printer.

HP Photosmart 7520 e-All-in-One Embedded Web Server (EWS) Does Not Respond

My new (as of 3/14/2014) 7520 is connected (wirelessly) to an all-Apple wireless network. with four computers (and, at times, two iPhones) sharing that network.
While I can print to the 7520 and also scan from it, I cannot access the 7520's Embedded Web Server, no matter what I try.
I have located the 7520's IP address on its display and entered it into the Safari web browser's address field as 192.168.1.7 (with the usual http colon slash slash prefix, of course). When I hit return, the browser's progress bar appears and then stalls. After 30 seconds, the progress bar disappears and nothing else happens.
While trying to find what might be causing this problem, I have also…
• disabled the network's (and my computers') firewalls,
• used the 7520's Bonjour address,
• tried both addresses using Safari on …
- a MacBook running OSX 10.6 (Snow Leopard),
- a MacBook Pro running OSX 10.7 (Lion),
- a MacBook Pro running OSX 10.8 (Mountain Lion),
- a Mac mini running OSX 10.9 (Mavericks), and
- an iPhone 4 running iOS 7.1
- an iPhone 5 running iOS 7.1
• made sure I was using the latest version of the printer driver software and HP Utility, and
• used the HP Utility to attempt to access EWS,
…all without success -- that is, on the laptops, nothing is displayed. On the iPhones, Safari reports that it "could not open the page because the server stopped responding."
Furthermore, although I can turn on and connect to the 7520's Direct Wireless wi-fi channel with my laptops and iPhones, typing the address for the EWS (specified in the printed Network report as http://192/168.223.1) in the browser and pressing Enter again yields the same result.
I had all these problems with a 7520 I bought from a local computer store. I contacted HP Tech support by chat, spent 4 hours walking through resets and other tests with them, and they decided to send me a new 7520. I have sent back the first 7520, installed the new one, and the problems persist with the replacement 7520!
What do you think might be wrong here? Do you have any advise or trouble-shooting guidance?

Okay… I did as you advised — as best as I could, that is… the link you posted yielded a page marked "HP was unable to find the page you wanted."
In any case, I changed the DHCP range to 192.168.1.100 thru 150.
Using the following procedure, I believe I set the 7520 to the static address 192.168.1.10 (using the 7520's control panel, from the home screen)…
• Tapped the radio (wireless) icon, second from the left on the top bar of the screen.
• Tapped "Settings" button, lower-left screen.
• Tapped "Advanced Settings" bar (second fom bottom).
• Tapped "IP Address" bar (at top).
• Entered "192.168.001.010" in the IP address field.
• Pressed the home button icon to the upper left of the display.
• Tapped the wireless icon in the top bar again and confirmed that the IP address had been changed to … .10
With that done, I tried
http://192.168.1.10/
in the browser of a couple of my computers (OS X Lion MacBook Pro, OS X Mountain Lion MacBook Pro).
Still no joy.
In case you don't alread know, Airport base stations can be set to reserve specific IP addresses for static IP devices or services. I reserve an IP address for testing database and OS X servers on my network (for clients). You can reserve as many such IP addresses as you like in the "Network" tab of a base station (using Airport Utility) as shown here…
Based on your advice, I have reserved the … .10 address, as you can see. Hope this is useful to you.

HP Officejet 4360 e-All-in-One Series - Will scan but will not print

So I have installed my new wireless printer and it will scan, both on USB and wireless, but it will not print. During the install process, at the very end of step 3, it says that it can't find an internet connection then prompts to copy a URL for completion of install online. The link takes me through the same install process.
When trying to print there is an error that says that it will not print due to a problem with the current printing setup. HP Print and Scan doctor lists all ok. The internal print test page works but the test page doesn't. It then prompts reinstall. So far I have tried:
Reinstalling
Reinstalling after running disk cleanup
Reinstalling after with firewall turned off
Changing to a standard TCP/IP port
The problem is the same whether on USB connect or wireless.
I am about to throw this thing out the window. Any ideas to save its life?

Hi @gesus,
Welcome to the HP Forums!
I understand that you can scan but not print with your HP Officejet 4630, on Windows Vista. I am happy to look into this printing issue for you!
Are you able to make copies? Copy Text or Mixed Documents.
In the meantime, I would recommend to go through this guide, 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print: Windows Vista.
Let's start with that guide, and we will go from there!
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I just bought a Quantaray All-in-one card reader. It does not work with my Macbook OSX.

I just bought a Quantaray All-in-one card reader. My Macbook OSX does not seem to read it. I have tried attaching it with iphoto on both before and after attaching the card reader to the computer and also have tried another card. Directions say that a green light should come on to prove that connection has been made; I only get a red light. I am Europe with no help and am desperate. Can anyone out there please help? Thanks.

There is no way to use the Thunderbolt display with a computer that has no Thunderbolt port.
Swap the display for the Mini DisplayPort version
<http://store.apple.com/us/product/MC007LL/A/apple-led-cinema-display-(27%22-flat -panel)>
The price is the same.

HP all in one: can I connect a non-wireless mouse to the computer

I have an all-in-one desktop computer (HP pavilion with Windows 8) with wireless keyboard and wireless mouse. What happens if the mouse drops to the floor and breaks? Do I need a new mouse or can I connect a normal mouse with a USB to the computer? Or does the computer work ONLY with a wireless mouse?
This question was solved.
View Solution.

You can connect a USB mouse to your all-in-one PC.
You won't need to find any drivers since Windows 8 will provide the driver as soon as you plug in the mouse.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Photosmart B010a All In One test print O: K: Does not print from the computer

Similar Messages

Maybe you are looking for