Photosmart B110A all-in-one wireless printer

Printer keeps disconnecting itself from the wireless connection, have tried setting a static IP address but no luck. Any other solutions available? Can I alter the stand-by settings for the printer?
Any Help would be greatly appreciated.
Many Thanks,
Darren
This question was solved.
View Solution.

Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Hp - photosmart e-all-in-one wireless printer cn731a- nothing prints??

HP - Photosmart e-All-in-One Wireless Printer (CN731A)
Went through setup on Windows 7 64-bit, printed the test photo, came out great. Thought everything was good to go. Later, when trying to print a document, it wouldn't print. Computer popped up a message saying "Successfully printed" but when I went to the printer, there was nothing there. I tried running a wireless network test on the printer's screen, and once that page printed with the results, immediately after that, the document I was trying to get finally printed. This was an early Christmas gift for my parents, & my mom just informed me that she tried to print again today, but nothing happened on the printer. I am out of town now and am not able to troubleshoot on my own on the printer like I did a couple days ago so came here for advice.. Any idea what the issue might be? Did I maybe miss a step after doing the test print of the photo? Any ideas would be appreciated!

Hello,
Try the below steps ..
While the printer is ON, Unplug the power cord from back of the printer.
Disconnect all the cables that are connected to the printer.
Wait for 30 seconds.
Plug in only the Power Cord. ( Printer would Power on ).
Try making a standalone Color copy of a document . If it fails to print a copy, then it could either be an issue with the Ink cartridges or the Printer .
Regards,
Jabzi
Help the community by marking this post .
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!
I work for HP
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

HT4356 How do I connected HP Photosmart C6380 all-in-one wireless printer to my iPad

When I put in the key it says that it cannot connect But my iPad is connected to my wireless Internet as well as my computer and my phone

Check out this article. Your printer has to be on the list as air print compatible first.

Error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working'

error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working' My broadband is BT Infinity with a very strong signal throughout the house and my operating system is Windows XP. My printer will not connect wirelessly to my network, what can I do with respect to the error message 'Wireless Radio not Working'

Hello @GeoffH777 ,
Perfect! You are very welcome, I am very happy to hear the reset helped!
If you have a quick moment, please scroll back to my last message here and click the "Accepted Solution" button, so others can find our thread if they happen to run into the same issue.
Greatly appreciated, have a wonderful day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Photosmart e-all-in-one NOT PRINTING for MAC 10.9.2

Hi,
I have a HP Photosmart e-all-in-one wireless that I have been using for my Apple devices (Mac, iphone, ipad) for years and recently it started giving me problems.
First month or so ago, out of nothing the MacBookPro would not see the printer connected, in dispite of been connected to the network. During that time I was able to find it connected from my iphone & ipad. Then I was using to print from these last two.
Now, not even from my iphone & ipad. It seems that printer does not exist at all, coz it always says "printer not connected" on the MacBook and "No AirPrint Printers Found" on the ipad & iphone.
I've noticed that on HP website, the most updated version of the Mac is 10.9 and my devices has 10.9.2 Is this the problem? If so, how can I get by and continue to use the printer? I need to print ASAP.
Thanks,
eb

What router? Have you restarted the router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Photosmart 6180 All-in-One Wireless Connection After Windows 7 Laptop Added to Network

I replaced a broken Vista laptop with a new Windows 7 64-bit laptop. After I installed my Photosmart 6180 All-in-One, the printer stopped working correctly when we try to connect to it wirelessly.
I followed all the directions HP provides for updating the printer software and drivers for Windows 7.
We've tried all the suggestions for resetting the printer that we can find on the HP forums.
The printer works properly when connected via USB cable to a Vista laptop.
I was not able to get the printer to work via USB cable connected to the Windows 7 laptop.
When we try to connect via the wireless signal, regardless of Vista or Windows 7, the printer goes into an endless initialization loop.
We need to determine whether achieving a wireless connection is hopeless. If it is not, we need step-by-step instructions on how to resolve the issue.
The security system for the printer is WEP. We connect through a wireless router provided by Verizon FIOS.
Many thanks in advance for your help.

Some of HP's printers do not support WEP shared. If you are using WEP shared this could be the problem. I would suggest turning off the WEP security temporarily to see if that fixes the issue. If it does then you can look at changing the security to WEP Open system authentication.
Mike
Say "Thanks" by clicking the Kudos Star in the post that helped you.
I am an HP employee.

HP Photosmart C4780 All-in-One Only Prints Half a Page

MacBook Pro 15.4 Laptop Model A1286
Snow Leopard 10.6
HP Photosmart C4780 All-in-One
Wireless Connection
Airport Extreme Sim Dualband
New to wireless
Why does the wireless printer take several minutes before it prints?
Why does it print only the top banner of a web page?
Why does it print only quarter or half the page of a document or web page?
Why does it continually lapse into “pause” mode?

Do not connect a USB cable to the router. This will confuse and defeat the wireless connection.
Let's add the printer using WPS:
FIrst, start the WPS process from the front panel of your printer (Setup [Scan] > Network > Wifi Protected Setup) Then:
open the Apple Airport Utility
select your wireless router
select Manual Setup
select Add Wireless Clients ... from the Base Station menu
Select First Attempt then press Continue.
You have to start the Apple Add Wireless Client process within two minutes of starting the printer's WPS pushbutton method. Actually, order doesn't matter ... you can start the Add Wireless Clients process on the the Apple router first then start the printer's WPS pushbutton method.
Now your printer will be connected to your router.
Because there are two printer icons in the list, let's reset the printing system again:
- Sys Prefs, Print & Fax
- Right (control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Best all-in-one wireless printer for Mac 10.9.2

Looking for best wireless all-in-one for home use. I have Mac OSX 10.9.2, iPhone 5, iPad and a wireless network. Not technically inclined. Any recommendations?

I wish a few more users would take the time to share their experiences with printers. I have had a Canon MX870 for several years that is nothing but a perpetual headache -- it needs to be reconnected to the network three or four times a day or it simply will not print. There are lots of posts on this topic and I have tried every possible solution with no luck. I am reluctant to buy another Canon -- this experience has left me doubting their products. I am also reluctant, based on past experience, to consider an HP product. So that pretty much leaves Epson -- but which Epson? I am looking for an all-in-one wireless printer that will STAY CONNECTED to the network. Top-quality printing would be nice, but frankly, it's not on the top of my priority list. I just want to be able to use the printer, scanner and copier without wasting an hour of my day on maintenance. If you have had positive experience in this regard, please take a few seconds to post your recommendations. Thanks. (I am running the latest version of Mavericks on a new Mac Pro.)

How do you get a MacBook with OS X10.6.8 to print to an HP 4500 all in one wireless printer?

How do you get a MacBook with OS X (10.6.8) print to an HP 4500 all in one wireless printer?

Go to http://www8.hp.com/us/en/support-drivers.html and ensure you have the latest printer drivers loaded. Also, HP will often post the steps to enable the wireless functions when setting up the AIO functions.

HP Photosmart C7280 All-in-one problem printing. Ink System Failure has failed unable to copy--

I'm having a problem printing on my HP Photosmart C7280 All-In-One. The following message is what came up on the printer screen: Ink System Failure has failed unable to copy, receive faxes or print. Refer to printer documentation Error O.cl9a0007.
Does anyone have any suggestions?
This question was solved.
View Solution.

Hey Spider! First off welcome to the forum.
I would recommend removing all the ink cartridges, unplugging the USB cable from the computer that connects to the printer, and then shutting the printer off completely by removing the power cord. Then restart your computer. Turn the printer back on but leave it disconnected from the computer. After it has finished its power on cycle go ahead and insert the ink cartridges back into the printer and be sure to seat them properly.
After you have all the cartridges back in the printer properly then connect it to the computer. See if this resolves the issue. If not post back with any findings.
Thanks,
SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Photosmart 6520 all in one not printing

Hello,
My HP Photosmart 6520 all in one printer will not print anything in black and it has a brand new cartrige in it. I have tried restarting the printer, and the computer and it is not helping. Please help.

Hi Roselilith823,
I came across your post and was wondering, was the issue you were experiencing resolved?
Roselilith823 wrote:
Hello,
My HP Photosmart 6520 all in one printer will not print anything in black and it has a brand new cartridge in it. I have tried restarting the printer, and the computer and it is not helping. Please help.
If you are still having difficulty, please call Phone support regardless of your printers warranty status. The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
Please let me know the outcome, and/or if the issue had already been resolved. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

My HP photosmart 2610 all in one will print by not allow me to save or send a scan

My HP Photosmart 2610 all in one will scan but will not allow me to save the scan or email the scan. i assume it is a bug with maverick.....which i recently downloaded

Does this thread help?
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/OS-X-10-9-Mavericks-Incor rect-output-using-HP-Scan/td-p/3069079

C7289 All in one- wireless printing not working

It looks like all connected for wireless printing, however, nohing will print! Please help

Print a Wireless Network Test from the front of the printer (Setup > Network area). Does the printer have a valid IP address (not 0.0.0.0 or 169.254.x.x)?
Tell me about your network - router brand/model, encryption type (WEP, WPA, etc) and ISP type (DSL, Cable, etc).
What operating system?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Hp photosmart c309a all in one series printer indicates the wireless radio is not functioning.

The printer has had difficulty finding the wireless router.
I had a problem with the print coming out on an angle.
I cleaned the rollers with a dry rag now the wireless radio is not functioning at all.

Try resetting the printer. Turn it off. Hold the # and 9 keys while turning it back on.
If this does not work, call HP support: www.hp.com/go/totalcare (click on Printers & Monitors, use the phone number on the resulting page).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I have an hp photosmart c7280 all-in-one series printer won't print. error message, system problem

I have an HP Photosmart All-in-One C7280 series printer/fax/copier/scanner. I have been having issues with printing for the past few weeks. It is a wireless printer, with a jack into the wall (for fax) and it is plugged into a power source. I never used to have issues with it before, but recently, it won't print when I send a document to it to print. It will print its configuration pages, reports, etc if I select them from the Printer's menu but not when I send a doc to it to print. First it was saying it was offline, but I figured out how to override that by operating as an administrator and selecting "Use Printer Online" from the dropdown menu when I right clicked on the printer from the control panel. But now it says "Error: Printer failed to print document. System error".
Noooo clue what to do now. This is the only color printer we have so we kind of need it to work. We bought this printer off the shelf at a office store (before I started working here) and so we don't have any designated technichians to work on it. I asked the guy who services our Image Runner Copier to look at it but he had no clue what was wrong with it. Hopefully someone can help?

goestherain,
I need to know what operating system you are using to helps narrow troubleshooting a bit, what OS are you running?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Photosmart B110A all-in-one wireless printer

Similar Messages

Maybe you are looking for