Photosmart c3180 prints publisher 2007 multiple labels incorrectly

When printing with Publisher 2007 with the Multiple labels per page option, the first label prints fine but the next 5 has a mini border in the upper corner. When I print to a PDF printer, these do not show and the PDF image is perfect. this issue is with my Photosmart C3180. Drivers for this AllInOne is very up to date. Using Windows 7 Home Premium. I scanned the actual printout so you can see what I mean.

OK. Just installed MS Office 2010 with Publisher 2010 and it still does the same thing. It is either a simple publisher or printer setting. Also reinstalled the printer too. I know someone has a simple answer. Microsoft doesn't even understand my question.

Similar Messages

HP Photosmart c3180 Print Cartridge Cradle stuck on the left side

I have a HP Photosmart c3180. The ink cartridges were installed incorrectly. When I open the front to change the cartridges, the two cartridges do not move over to the right for me to remove and reinstall properly. All paper jams have been cleared. Any help?

Hello brummpa,
Welcome to the HP Forums!
I understand the Deskjet 5150 carriage is stuck on the right hand side and won't move. I will do my best to assist you! Please make sure this printer is plugged into a direct wall, not a surge protector. Next, try performing a hard reset on your printer.
After, performing this reset, I would try manually moving the carriage over to the left side. If this step doesn't work, then please follow this entire HP document on Paper Jam' Error Message Displays on the Computer.
Please post your results!
I worked on behalf of HP.

Error:-9672 when trying to add HP Photosmart C3180 printer.

Printer: HP Photosmart C3180
"An error occured while trying to add the selected printer. Error:-9672"
Printer works fine if connected directly to my iMac. But, through "Airport Extreme Base Station", I get the error.
Anyone with same printer having same problem? Anyone solutions?
iMac Intel Core Duo Mac OS X (10.4.6)

I found the same thing out yesterday and did the same solution.
One issue should be noted. The quality of the print is much worse since we are not using the correct print driver. Works fine for standard unimportant text printing, but really can't be used for printing photos.
Connect the printer directly to the computer USB and print a photograph using the real print driver, then connect wirelessly using the above method and print the same photo. The difference is dramatic.
It also seems to overuse black ink when hooked up through the Airport, and the printer light blinks for a while after printing is done.
Anyway, I plan on leaving it hooked up wirelessly for convenience sake, but when good quality is needed I will attach it directly to the USB port.
You can verify my findings and let others know if you find the same thing I found.
Good luck, and lets hope there are more compatible printers available in the future.

Photosmart C3180 Printer

I have the C3180 and the printer works fine. But the scanner is not recognized by my iMac. I'm using OS 10.5.2
Did have it hooked up in a network and then found out that the scanner can not work in a network. I disconnected the C3180 from the network (I think) and now the scanner does not work. But the printer does. Perhaps I need to do something else to disconnect from the network. Can you help? HP is not linterested in helping until I pay them $35.00. I will never buy another HP product again.

Found the answer.
Please try the following step's
1-Open Your Mac hd icon on your desktop
2-Click on Applications and open the Hewlett-Packard folder
3-Click on the HP uninstaller and run it
4-After it uninstall's unplug your USB cable from your printer and
your mac and restart your mac
5-After mac restart's empty the trash can and plug the USB cable
back in directly to your mac and not through a hub
6-You will have to be on high speed Internet to get this software
download
7-Open your web browser and paste the following link in the address
bar
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex
?softwareitem=mp-55009-3&lc=en
&cc=us&dlc=en&product=1146331&os=219&lang=en
8-Now select download only on step #3
9-After the download is complete there should be a HP software icon
on your desktop of your mac
10-Open this icon and run the installer
11-Make sure that you complete the setup assistant
Are you now able to scan with your mac 10.5?
This should resolve the issue.

Driver Hp photosmart c3180 per Windows 7 homepremium 64 byte

ciao a tutti,ho un problema,scarico i driver da Vs sito,poi non riesco a istallarli,ho provato da chrome e da explore ma nulla da fare,ho il Cd che arriva fino a xp e non ho mai avuto problemi con quello,ma anche quando ho istallato per prova w 7 ultimate era tutt'ok,qualcuno mi può aiutare,grazie

Hello franky05,
Welcome to the English HP Consumer Forums!
I see that you have some questions/ concerns pertaining your Photosmart c3180 printer.
Please feel free to ask you questions or voice your concerns here in English.
Thank you, and have a great day.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Label Printing Using Address Book - How can I Print multiple labels of the same name?

Label Printing Using Address Book - How can I Print multiple labels of the same name?

I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade.
It's gone. But as a work-around, duplicate your photo (⌘D) to create as many versions as you want copies and select all at once. Then use the "Custom" print layout and set the photo size you want.
After printing, trash the added versions.

HP Photosmart C3180 on USB Will Not Print After Update to 10.5.7

My HP Photosmart C3180 all-in-one printer (connected via USB) has worked fine up to now. Last night I installed the 10.5.7 update and now all the machine will print is a single line of text with the name of the Adobe postscript file, and then it continues to feed and output blank page after blank page without end.
I tried reinstalling my printer drivers. That did not fix it. It also keeps prompting me for an Adobe PDF file name each time I send a document to print.
I've tried printing PDFs, Word documents, web pages, etc., and I keep getting the same results.
Any suggestions about alternative drivers or are other people experiencing printer problems after the update?

I downloaded the 10.5.7 update on its own and reinstalled it. That seemed to fix the problem now. Don't use the "Check for Updates..." link in Finder.

HP Photosmart C3180 All-in-One printer -- SCANNER not working.

I have had this HP Photosmart C3180 All-in-One printer for a couple years and all is well. HOWEVER, the one function not working properly is SCANNING. I can print fine and copy fine. But when I go to scan something my power button flashes for about 10 seconds and then stops. Nothing happens, and nothing scans. HP said it was not the printer itself, but something to do with my operating system through Apple. I have the current 10.5.6 version of Leopard.
If I can get any help from others I'd appreciate it!

HP provided this link to software which resolved my scanning issue.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-55009-3 &lc=en&dlc=en&cc=us&lang=en&os=219&product=1146331

Printing cards and labels on Photosmart C4580 printer

I couldn't find my particular problem using the search so I'm hoping for some answers here. I have a Photosmart C4580 printer connected to a Toshiba laptop running Vista with all the current updates. My problem is that I can't seem to get it to print on business card stock or addrress label stock. Here's the issue:
I use Word to create business cards to print onto business card stock. The instructions that came with the card stock say to do a test page on regular paper first to verify placement, which I do - everything looks perfect so I put a page of card stock in the feeder. The printer grabs the page and prints with the image offset towards the top of the page by about 1/4" so that the top of the card is above the edge of the cards. As the cards are repeated down the page, it shifts down slightly so that by the time it gets to the bottom of the page it's almost on the card, but still overlaps the top edge slightly. Printing onto regular paper works perfectly every time.
A similar thing happens printing address labels - again using Word to create the labels for either Avery 5267 or Avery 8161 label stock. On regular paper everything looks perfect, but feed a sheet of label stock in and the text is offest toward the top of the page. The last time I needed labels I was able to get it to print properly by printing one label at a time, then refeeding the page and printing the next one, then repeating until each label on the page was printed. When you're printing several pages of labels that takes a lot of time!
Is there something I need to do to get this printer to print cards and labels?
Alan Hepburn
Alan Hepburn
Proud to be a Blue Star Family

@ deblois 1089 - I will need a little more information to help out. What are the specifications of the labels? Do you have the measurements and the weight of the paper type? Thanks
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

ADOBE PDF - print driver problem converting Publisher 2007 to PDF

I cannot find an answer to my problem anywhere online. Our company does not have InDesign yet, so I have to use Publisher 2007 (Vista operating system) to create ads. The problem is that when I go to print and choose ADOBE PDF to convert the Publisher document, the PDF output is 1/4-1/2" smaller all the way around. It is perfectly sized in Publisher, but the PDF output keeps reducing. Is there a fix for this? Thank you.

I suspect it is a shrinking issue in Publisher (check the print properties). A lot of packages reduce the margin so it will print all of the information on printers, many printers add margin space. At least worth a check.

My Publisher 2007 Font Times document printed to Adobe X Printer has 150% clear display of PDF but not quite as clear at 100%

(1) HP 2311X LED Monitor and monitor LED HP Pavilion 27XI LED, Windows 8.1 on HP ENVY 700-qe computer system: (2) Windows XP Dell Computer Inspiron 530 Model: DCMF with NVIDIA Video Card GeoForce 8400 with Monitor Dell LCD model S2409Wb (3) I am using Publisher 2007 to print to Adobe Pro version X PDF printer to produce a PDF. We produce one PDF set up for 5.5X8 set up in printers spread and another PDF set up for readers spread. At 100% on both computer systems the print on the screen is not as clear (just a little like when an inkjet runs low on ink-some parts of the printed letters aren't as distinct as when viewed at 150%. We are using the Times Font. Clear Type computer enabled on both the Windows 8.1 system and the XP system displays. I tried using Publisher 2013 to produce a PDF and it seemed just as good at 150% and a little clearer at 100%. The PDFs are displayed on a web page for people to download. The web page is www.cbcb.org – a good booklet to look at on the first web page is “Appointed Times”.
What is going on here? The document has been viewed on the above two computers with three monitors and results are the same. With the Publisher 2007 I was printing to an installed Adobe Printer in the printer dialogue box to produce the PDF and with the Publisher 2013 I was creating the PDF by using the "SAVE AS" option.
Would appreciate some pointers on what is going on.

This is a pretty unusal error that i dont even think Adobe has an answer to. Either A.) They are really bad with keeping all their customer case information or B.) They know this is something they have no answer to so they are giving us the run around. It just doesnt make sense that it will work with excel and powerpoint now and not word. Only thing i have not tried is reloading Office...It may be something to attempt. If anything comes to mind i would appreciate it. Thanks in advance.

HT2486 How can you put same contact in a Group multiple times so that you can print the same mailing label multiple times?

How can you put same contact in a Group multiple times so that you can print the same mailing label multiple times?

Hello,
Avery...
https://discussions.apple.com/thread/2588943?start=0&tstart=0
Or...
http://www.belightsoft.com/products/labelsaddresses/overview.php

HP Photosmart C3180, is there a driver that will enable this printer to read sdhc cards

HP Photosmart C3180 all in one printer. is there a driver that will enable this printer to read SDHC cards.

This is a limitation of the USB hardware on the C3180 which will not read SDHC cards.
Maximum recommended memory card size: 1 GB (solid state only)
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Printing one address multiple times on the same label sheet

Does anyone know how to print the same address on all 20 labels of a label sheet. So far I can only figure out how to print 20 different addresses. Any help would be appreciated. Thx.

Greetings,
That's not a feature of Address Book. You can do that with a program called pearLabelizer, which is free. If you want to print groups from Address Book, it pulls the information for you and prints the labels; if you just want to print one address onto multiple labels, you can type it in or paste it in from somewhere, select all the labels and then Print and it will be done for you.

Printing Across Multiple Labels

I have a requirement to modify a report that will print data in a designated format. The report was originally designed to accommodate five or less detail lines. Now I have to change the report to accommodate an indefinite number of detail lines that will print across multiple labels. The labels are 2 1/2" wide and 1" high with a Times New Roman font of 5 (small font, but acceptable). The top of the report allows two lines of data for a header. There is a subreport that allows 5 detail lines and a one line footer that totals the detail lines.
This design worked fine when there where only five detail lines. However, there can now be more than five detail lines and these print on the label, losing the footer. What I need to be able to do is to print these detail lines across multiple labels. There will not be header or footer lines on these labels until the last detail line is printed, at which time the footer will print.
I have not been able to figure out how to get labels to continue when the detail lines exceed a specified amount and continue on the next label.
Can anyone offer any assistance, please?
Thank you in advance.

Not much info including version of CR but think of it this way, and it may be printer dependent, rather than defining your label size as 2 1/2 x 1 set your page size to the size of a typical printer or a continuous form feed printer. Something that lines up with your labels.
For example is if you print to a laser printer you'll see the label header info and then the multiple detail lines ( this is the Detail section of the designer ) and it prints until no more data then you see the footers being printed.
So what you do is manually space your fields so it lines up with the labels and then it should print all detail lines. You will have to create formula to insert lines to adjust for any missing lines so the labels line up when the footers start printing. Example, you don't won't the footer to start in the middle of a label, unless that is what you do want.
Think of it like a Continuous form Printer rather than a label printer. Depending on the printer and labels being used I'm not sure it will allow you to create a custom paper size, if it does though and you'll have to test this, set it for the maximum length you expect your labels to be printed.
Hope this makes sense?
Thanks
Don

Photosmart c3180 prints publisher 2007 multiple labels incorrectl​y

Similar Messages

Maybe you are looking for

Photosmart c3180 prints publisher 2007 multiple labels incorrectly