Photosmart C4180 All-in-One. While printing it stopped and the power button is orange. Nothing works

Hi, I have a Photosmart C4180 All-in-One. So far it worked perfectly.
Tonight I had to print a few pages and right in the middle of it, it stopped leaving the page halfway.
Also the on/off button stays orange and there is an exclamation point underneath it.
I removed the page and turned off the power by removing the plug (pressing the on/off button didn't work).
While putting the plug back in, the power came on again... but the on/off button remains orange. Nothing works.
Does anybody recognize this problem and/or does anybody have a solution for this?
Thank you,
Dutchfox

Hi , I understand that you are having issues printing and scanning. I would be happy to help you.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.HP Photosmart (D110), Photosmart Wireless (B110), and Photosmart Ink Advantage (K510) e-All-in-One Printer Series - Printing a Network Configuration Page. Check to see if you still have a valid IPv4 address. If you have a valid IPv4 address for the printer then try and access the Embedded Web Server for the printer.
Type the IPv4 address into your web browser's address bar. (Safari)Did it load the web page? If you were able to access the printer's Embedded Web Server, please try the following steps: Repair the Disk Permissions on the Mac:Close all applications.On the Apple menu bar, click Go, click Applications and then click Utilities.Double-click Disk Utility.Highlight your hard drive/partition on the left.Click Verify and then Repair Disk Permissions. Restart the computer.. Reset the Printing System: Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol. Click the Apple icon and then click System Preferences.Click Printers & Scanners.Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.Click OK to confirm the reset.Type the correct Name and Password.Click OK to reset the printing system.Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button. If you appreciate my efforts, please click the 'Thumbs up' button below. If there is anything else I can help you with, just let me know. Thank You.

Similar Messages

Windows 8 All-In-One 1210v printer that stops and starts printing process

My printer has worked well until a few days ago when it suddenly started to load and begin printing, only to suddenly stop and "rest" then start again and do the same thing. This problem continues. The only thing I did that I thought might be the problem was to replace the ink cartridges.
I have checked with the " printer doctor" and tried all suggestions, including removing and replacing the cartridges. But that didn't work nor did the other suggestions there. I found no mention of my particular problem anywhere.
Do I need a new printer?

I am sorry you are having an issue with your prints starting and stopping.
1.) How is the printer connected to the PC?
2.) Following these steps should help
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01940312&tmp_task=solveCategory&cc=us&dlc=en&la...
3.) Did you download the windows 8 drivers from our website and install it?
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=90770&
I hope this helps
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

I have an HP Photosmart C4180 all-in-one, printer, scanner and copier. I can't figure out how to scan more than one page? It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement. Any ideas??
Thank you, Jetteski

Hello Jetteski,
Hello Jetteski, Thanks for the post.
Since you are running a MAC, check the below links for some excellent information on scanning. Good Luck!
http://goo.gl/M8Cl2
http://goo.gl/cufK6
http://goo.gl/OTQoR
I work for HP but my posts and replies are my own....Thank you!

HP Printer Photosmart C4180 All in One

HP Photosmart C4180 All in One Printer.
I did reinstall the printer using the original disk, did uninstall it and then reinstall it, but did not work right. Then I try to download the driver direct from HP and I get the same result (The printer works but the scanner, ink levels etc is not working)
I need to TOTALLY REMOVE THE ENTIRE SOFWARE, can somebody help?
Thank you,
Anthony

Hello anyosua,
Welcome to the HP Forums.
I see that you are having an issue with the software and drivers for the printer.
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Hp - photosmart e-all-in-one wireless printer cn731a- nothing prints??

HP - Photosmart e-All-in-One Wireless Printer (CN731A)
Went through setup on Windows 7 64-bit, printed the test photo, came out great. Thought everything was good to go. Later, when trying to print a document, it wouldn't print. Computer popped up a message saying "Successfully printed" but when I went to the printer, there was nothing there. I tried running a wireless network test on the printer's screen, and once that page printed with the results, immediately after that, the document I was trying to get finally printed. This was an early Christmas gift for my parents, & my mom just informed me that she tried to print again today, but nothing happened on the printer. I am out of town now and am not able to troubleshoot on my own on the printer like I did a couple days ago so came here for advice.. Any idea what the issue might be? Did I maybe miss a step after doing the test print of the photo? Any ideas would be appreciated!

Hello,
Try the below steps ..
While the printer is ON, Unplug the power cord from back of the printer.
Disconnect all the cables that are connected to the printer.
Wait for 30 seconds.
Plug in only the Power Cord. ( Printer would Power on ).
Try making a standalone Color copy of a document . If it fails to print a copy, then it could either be an issue with the Ink cartridges or the Printer .
Regards,
Jabzi
Help the community by marking this post .
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!
I work for HP
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

HP Photosmart C4180 All In One ... won't scan at all

According to HP, I have all the latest HP Photosmart C4180 "All In One" Drivers Installed.
According to PackardBell (my pc) it is all installed to Windows 7 with a 32 Bit Operating System.
The problem I get is that I start the P/C ... Then I opened up the HP "Solution Centre" on the desktop ...
It tells me "Your HP Photosmart C4100 series is ready"
In the middle of the screen it says "Start An Activity" then there is a button that says
"Scan Document" ... I press on this button and it seems to do nothing!!! ...
Please Help?? ... gooseman57

Hi there @gooseman57 !
Thanks for contacting the HP Forums!
From what I can see from your post, sound like the scanning software for the HP Photosmart C4180 is not responding. I should be able to provide you with a resolution for your issue.
A good place to start with an issue such as this, is to restart the computer and the printer. I would suggest trying a photo copy on the printer to ensure the printer hardware is OK!
If you continue to experience this problem I would then suggest uninstalling and reinstalling the HP drivers.
I have provided a link with instructions on uninstalling the printer software and another link to the HP Photosmart C4100 All-in-One Printer series Full Feature Software and Driver
There are also other ways of scanning we can explore. For example, you can scan using the program Microsoft Paint. All you need to do is:
1.Open PAINT
2.Go to "FILE" dropdown
3.Click: From scanner or camera
3.Choose your printer
4.Choose what type of scan you would like
5.Click SCAN
6.Click SAVE
Here is a link to a YouTube video for scanning using Microsoft Paint: Scan with your All-in-One Using Windows Paint (Windows 7)
Let me know if this was useful information and please post back with the results of your troubleshooting.
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

My new iPod plays the music over and over again. It does not stop and the volume buttons have no effect. What can I do? The RESTRICTIONS require a a passcode and I don't have one. Any suggestions?

My new iPod plays the music over and over again. It does not stop and the volume buttons have no effect. What can I do? The RESTRICTIONS require a a passcode and I don't have one. Any suggestions?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup.
In order to restore with the unknown Restrictions passcode you will likely have to place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Last,
- Restore to factory settings/new iOS device.

IPhone 4s looks shut down all the time.especially when the 3g is on.in the forums its said to push the use button and the power button at the same time.the people calling me cannot reach at my phone.what should i do ?

my phone looks like offline all the time.its all about me to notice that its offline.then i have to push the main button and the power button together to open it.then the apple sign comes on the screen and the phone turns online.but i cannot receive the information of who called me at the time that my iphone 4s turned offline by itself.i cannot receive messages at all.what can i do now ? i sent the phone to the service and they just told me that they installed the current version.but i guess nothing happened.its doing the same thing again.i cannot use my iphone.
From Turkiye.

I've tried all those.But nothing works.The phone seems to be shut down.But it is not.When i get it out of my pocket, for example to call someone, i touch to main button but nothing happens.I solve it by pushing the power button and the main button together just for a couple of seconds, as its said so in the forums.
also, people told me that they were calling me, my phone was ringing but i didnt answer?...i checked it for millions of times, it seems to be shut down, but its normally not.then i push the buttons together and the apple sign comes on the screen.it searches for the network.and it works.
but i do not see any calls, texts anything.but for the others, they say my phone seems to be workin.
I thought it was 'cause of the 3G is switched on but when I turn 3G off, it does the same thing.it seems to be offline all the time.

I was on the phone last night and my phone randomly turned off. It will not come back on even when I have tried to hold the home button and the power button together while being plugged into the computer. What do I do?

I was on the phone last night and my phone randomly turned off. It will not come back on even when I have tried to hold the home button and the power button at the same time, while being plugged into the computer? What do I do?

Plug it into power for at least 15 minutes. If it doesn't automatically come on, try a reset... press the home and sleep (on/off) buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

I was recently updating my phone to the newest software after ios7. It froze for quite a while so I tried holding down the home button and the power button and it shut off. Now it says I have to restore my whole phone but an Error keeps occurring?

I was recently updating my phone to the newest software after ios7. It froze for quite a while so I tried holding down the home button and the power button and it shut off. Now it says I have to restore my whole phone but an Error keeps occurring? It brings me to a website saying the steps to possibly fix it but I don't find them helpful

http://support.apple.com/kb/TS1275

HP Photosmart C7280 All-in-one problem printing. Ink System Failure has failed unable to copy--

I'm having a problem printing on my HP Photosmart C7280 All-In-One. The following message is what came up on the printer screen: Ink System Failure has failed unable to copy, receive faxes or print. Refer to printer documentation Error O.cl9a0007.
Does anyone have any suggestions?
This question was solved.
View Solution.

Hey Spider! First off welcome to the forum.
I would recommend removing all the ink cartridges, unplugging the USB cable from the computer that connects to the printer, and then shutting the printer off completely by removing the power cord. Then restart your computer. Turn the printer back on but leave it disconnected from the computer. After it has finished its power on cycle go ahead and insert the ink cartridges back into the printer and be sure to seat them properly.
After you have all the cartridges back in the printer properly then connect it to the computer. See if this resolves the issue. If not post back with any findings.
Thanks,
SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HP Photosmart e-all-in-one NOT PRINTING for MAC 10.9.2

Hi,
I have a HP Photosmart e-all-in-one wireless that I have been using for my Apple devices (Mac, iphone, ipad) for years and recently it started giving me problems.
First month or so ago, out of nothing the MacBookPro would not see the printer connected, in dispite of been connected to the network. During that time I was able to find it connected from my iphone & ipad. Then I was using to print from these last two.
Now, not even from my iphone & ipad. It seems that printer does not exist at all, coz it always says "printer not connected" on the MacBook and "No AirPrint Printers Found" on the ipad & iphone.
I've noticed that on HP website, the most updated version of the Mac is 10.9 and my devices has 10.9.2 Is this the problem? If so, how can I get by and continue to use the printer? I need to print ASAP.
Thanks,
eb

What router? Have you restarted the router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Photosmart 6520 all in one not printing

Hello,
My HP Photosmart 6520 all in one printer will not print anything in black and it has a brand new cartrige in it. I have tried restarting the printer, and the computer and it is not helping. Please help.

Hi Roselilith823,
I came across your post and was wondering, was the issue you were experiencing resolved?
Roselilith823 wrote:
Hello,
My HP Photosmart 6520 all in one printer will not print anything in black and it has a brand new cartridge in it. I have tried restarting the printer, and the computer and it is not helping. Please help.
If you are still having difficulty, please call Phone support regardless of your printers warranty status. The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
Please let me know the outcome, and/or if the issue had already been resolved. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

My HP photosmart 2610 all in one will print by not allow me to save or send a scan

My HP Photosmart 2610 all in one will scan but will not allow me to save the scan or email the scan. i assume it is a bug with maverick.....which i recently downloaded

Does this thread help?
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/OS-X-10-9-Mavericks-Incor rect-output-using-HP-Scan/td-p/3069079

HP Photosmart C4780 All-in-One Only Prints Half a Page

MacBook Pro 15.4 Laptop Model A1286
Snow Leopard 10.6
HP Photosmart C4780 All-in-One
Wireless Connection
Airport Extreme Sim Dualband
New to wireless
Why does the wireless printer take several minutes before it prints?
Why does it print only the top banner of a web page?
Why does it print only quarter or half the page of a document or web page?
Why does it continually lapse into “pause” mode?

Do not connect a USB cable to the router. This will confuse and defeat the wireless connection.
Let's add the printer using WPS:
FIrst, start the WPS process from the front panel of your printer (Setup [Scan] > Network > Wifi Protected Setup) Then:
open the Apple Airport Utility
select your wireless router
select Manual Setup
select Add Wireless Clients ... from the Base Station menu
Select First Attempt then press Continue.
You have to start the Apple Add Wireless Client process within two minutes of starting the printer's WPS pushbutton method. Actually, order doesn't matter ... you can start the Add Wireless Clients process on the the Apple router first then start the printer's WPS pushbutton method.
Now your printer will be connected to your router.
Because there are two printer icons in the list, let's reset the printing system again:
- Sys Prefs, Print & Fax
- Right (control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Photosmart C4180 All-in-One. While printing it stopped and the power button is orange. Nothing works

Similar Messages

Maybe you are looking for