Photosmart C4780 (Windows 7 - 32 bit) - installation hangs up

I am having difficulty installing the driver for the Photosmart C4780 on a Windows 7 (32 bit) PC.  I have downloaded the latest driver from HP support site.  I copied the file to a folder on my C Drive and extracted it to its own folder.  I run 'setup.exe' from that folder.   Installation gets to 'remove existing device...' and then nothing (stops - does no complete installation).   A device is listed as 'Photosmart..' but has the yellow exclamation mark next to 'troubleshoot'
I have restarted the PC.  Shutdown the printer by disconnecting the printer and power cables.  I have deleted folders in the temp folder.   I have tried several options and when I run the install I get to the same point and then it basically doesn't complete the installation.

Hi,
If the printer is connected via USB, ensure the cable is disconnected.
Click the Start button and type %temp% into the search bar, press enter to open the folder listed within the searh results.
Open the HP installation folder which begins with 7z (e.g. 7zs1234), then open the Util folder and then the CCC folder.
Run Uninstall_L3.bat and an uninstall should start.
If only a black command prompt dialog appears press enter once, confirm any uninstall till a reboot is required.
Restart your PC, be sure to temporarly disable any AntiVirus or Rel Time protection software and reinstall the software, then check for any difference.
Please let me know the results,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • HP Photosmart C8180 Windows 7 64-bit

    HP PHotosmart C8180   Windows 7 64 bit       Serial Number {Removed for privacy}
    My Photosmart printer began giving me error codes...ink system failure, B83024C6, and many others....flashing and blinking lights constantly.  We tried all the resets, called HP and they said they did not have a fix for this so we were not going to pay the tech fee for nothing.  I unplugged the printer and now it says...connect and install software. 
    PLEASE HELP!  This is the most frustrating printer and everyone seems to have the same complaint.  This was an expensive printer and Hp should come up with a solution.
    I would appreciate any help you could give me....
    We connect with aUSB cable.  We also have a wireless N system but the printer is not used on that system.
    Profeciency level of me is average
    My husband and I have read the forum for some time regarding problems with the C8180 and many have given up hope of fixing the flashing led light problem.  Our C8180 now has other problems and we are so frustrated that we are making one last attempt to get this working.  We purchased this high end printer in 2009 and for a year it worked just fine...then the problems started. 
    We have made no changes to the printer or the computer.  All software upgrades to the printer came from H.P. 
    HELP....
    Claire

    Well, as I expected.  Jumped through all the hoops to ask the right questions on EXPERT DAY, and none of your 300 EXPERTS  found it possible to answer the C8180 printer questions.  Why, because this piece of junk cannot be fixed!
    Thanks for nothing.

  • Windows 7 64 bit installation freeze because of disk

    Problem is a freeze during Windows 7 64 bit installation loading disk.sys when booting in UEFI mode. 
    According to Intel online support "Windows 7 Setup has a problem detecting the Toshiba SSD" (https://communities.intel.com/message/206067)
    Disk Drive
    ATA TOSHIBA THNSNH25 SCSI Disk Device  (238 GB)
    Is there anything to do about Windows 7 Setup ?

    See this post covering your subject and a solution here : http://forums.toshiba.com/t5/Satellite-Laptops-all-other/UEFI-prevents-Win7-install-on-new-SSD/m-p/4...
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

  • Photosmart C4780 Windows 7 64bit connectivity problems

    Is there any link where I can download the full set of drivers to make Photosmart C4780 work on Windows 7 64 bit?
    Can I buy anywhere a CD contaning all required drivers to make this printer work with Windows 7 64bit.
    I have installed all updates from HP but I still can not make it work. (Win 7 32bit does recognise the printer and jobs are printed without any issue).
    In fact, I got so frustrated with the time I have lost over this issue that I bought a new Cannon printer. It worked instantly so it sloved the immediate problem for me.  But it would be still nice to get the HP printer working.
    Thanks,

    Hi,
    The drivers for your printer can be found on the following page:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=da&cc=dk&dlc=da&sw_lang=&product=3794...
    You can download the software needed to make your unit run from that link.
    Please let me know how it works.
    AlHaste - HP Notebook Technician
    Were I able to help you? Please say thanks by clicking on the purple thumbs up icon over to the left
    Did I solve your issue? If so, Please mark Accept As Solution to the right

  • Solution? CS 3/Windows 7- 64 bit installation problem

    I found an answer for at least one of the MAJOR issues installing CS3 on Windows 7-64 bit ...
    The problem: CS3 installation goes smoothly, but when trying to open Photoshop, you get a blank Photoshop window and an endlessly spinning curser. Also, no other programs will open, yet if you check the program files, they seem complete. You may even discover that one of the non-working programs is actually open (but not accessible to you) somewhere in the depths of your computer. An error message may eventually appear (if you are lucky), which reads something to the effect: "You cannot use this product at this time. You must repair this product by uninstalling and then reinstalling this product or contact your IT Administrator or Adobe Customer Support for help."
    Check this link for the solution, which worked for me after four weeks of frustration and three Adobe problem tickets that were declared closed without resolution of this problem:
    http://www.megaleecher.net/Flexnet_Licensing_Service
    Short form is that the Flexnet licensing feature for Windows 7 is not set properly and prevents CS3 from registration/activation. It must read "start" and "automatic" - not "stop" and/or "manual." You get to Flexnet Licensing as follows: Start Menu>Run> (type in) services.msc>enter
    Then double click FlexnetLic in the menu, change the Stop to Start (by clicking on the word) and the Manual to Automatic. Click save. Restart computer and launch any CS3 program. This should bring up the rest of the installation process beginnning where you enter your serial number(s). From that time on, for me, everything was operational and still is (Whoopee!!!!!!)
    Side Note to Adobe: When I first encountered this problem FOUR weeks ago, I talked three different times with Technical Assistance personnel. The second of these three could have solved the problem - he had the right information, as I can now see. The problem: I could NOT understand his English. His accent was very heavy and the phone connection was terrible. He struggled as I did with such simple things as the word "start" where he had to literally spell it out four times before I understood what he was saying. We eventually got to the Flexnet screen and possibly could have solved the issue right then. But the communication process was so labored that it didn't work. I'm guessing now that a step was missed somewhere, because now all is okey dokey, after using the information in the above link.

    Pat, thank you for your very prompt response.
    Regarding my FLF files I will try the VLC Media Player as you suggested, thank you.
    Now regarding the Flash Player being a browser add on in my IE, I checked through Tools / Manage add-ons / All Add-ons and it displays only Adobe Shockwave Object from the Adobe range of products. Adobe Flash Player is not an Add-on in my system.
    By uninstalling it (when I was trying to install a standalone product), did I delete this Add-on from the available Add-ons from my IE?
    And if I did that, how do I reinstate it? (As you said a standalone Flash Player would have its limitations).
    I would appreciate your advice.

  • Z68MA-ED55 + UEFI + Windows 7 64-bit Installation

    I've been trying for a few days now to figure out how to install Windows 7 64-bit on a single, fatty 5.5TB GPT partition in UEFI mode for this motherboard while utilizing RAID5 and Intel SRT caching. Here's the scenario:
    1. I have (3) 3TB hard drives that are configured in a RAID5 array giving me approx. 5.5TB's of usable storage.
    2. I have (1) 64GB SSD that I want to use for Intel SRT caching for the above mentioned RAID array.
    3. I want a single, big fat 5.5TB GPT partition for the above mentioned RAID arrary.
    4. I want to install and boot Windows 7 from the above mentioned 5.5TB GPT partition.
    The reason for all of this is that Windows 7 64-bit cannot utilize any disk space beyond 2TB on the disk it's installed on.... unless it uses GPT... and you can only boot GPT using UEFI... This motherboard supports UEFI, but provides no details that I can find on how to install Windows 7. I can get into the EFI shell, and dink around, but I cannot browse any mounted drives (example, using simple "ls" command from any drive/path I get the error "ls/dir: cannot open current directory - Not Found Exist status code: Not Found"
    I'm decently familiar/comfortable with Linux/DOS/CLI work, but I'm not having any luck browsing any file system I try to mount through the EFI shell.
    I know what I'm doing on the RAID side, I can get RAID/SRT/Windows 7 64-bit working with MBR-type partitions and normal BIOS start up. Again, the problem is that that there's no way to access/partition the space after 2TB on the fatty 5.5TB RAID array drive that Windows 7 is installed on.
    SO! Any geniuses out there?

    I figured out how to do the GPT part of things with my Z68A-GD80 board, but only in AHCI mode (still pondering RAID mode for SRT caching) I'm hoping it is similar for you:
    Make UEFI the first boot device in the main boot order menu.
    After the Windows boot DVD is inserted (may need to restart into the BIOS) an EFI boot option will appear under the UEFI boot BBS Priorities submenu. Select it as the first boot device.
    Install Windows 64 bit with GPT partitions to 3TB drive.
    After it reboots, go back to the UEFI boot BBS Priorities submenu and make EFI Windows Boot Manager the first boot device.
    Boot into Windows.
    I may give up on the GPT partitions if I cannot get it to work in RAID mode; Seagate's DiscWizard utility magically allows the remaining space to be formatted as a separate partition for it's drives when they are already formatted as MBR. (But it only works with Seagate drives unless its installer is hacked.) If you ever figure out how to get RAID mode to work with one big GPT partition let me know! 

  • B1DIEvent Service on Windows Server 2008 x64 - installation hanging

    I'm trying to install the B1DIEvent Service on a Windows 2008 x64 Server but the installation is not completing. It does create the directories in the SAP folder but the installer hangs at roughly 95%.
    It seems to not be able to register the service on the server.
    Does anyone know if there would be compatability issues with Wondows 2008 Server x64? Or are there any speciffic steps that I can take to install this?
    I have installed MSMQ on the server.
    Any help would be appreaciated.
    Best wishes
    Edu van Zyl

    Hi Edu,
    Did you followed the instructions compiled in the other threads showing how to recompile the dll???
    Just follow step by step what is described there, it should work.
    DI EVENT SERVICE ON 64 SERVER
    1. Change compilation option to x64
    2. You have to replace the following 2 lines modified marked with:
    char msg[ 398 ]; // Old was mgs[378]
    sock, msg, 398, 0, (const struct sockaddr*)&sAddr, sizeof(struct
    sockaddr_in));
    3. Replace the old dll by the new one compiled
    4. Don't forget to register the dll (after compiling and copying in the right folder):
    C:\WINDOWS\SysWOW64>regsvr32.exe "C:\Program Files (x86)\SAP\SAP Business
    One DI Event Service\SAP Business One DI Event Server\SBO_SP_TransactionNotification\B1DIEventsSender.dll"
    Both Ad and Andres succeeded to do it.
    Hope it helps
    Trinidad.

  • On Windows 7 64 bit Firefox hangs after about 10 seconds. This was a clean install on a brand new computer.

    I have to end it with Task Manager.

    I have an old PSUS4 and a Samsung ML-2010R.  Both work perfectly so my issues are mostly with getting them to work each time I step up to the next Microsoft OS.  The post by wdboer helped me get my Windows 7 32-bit PC connected to my printer over the LAN and via the PSUS4 so many thanks to wdboer.
    I upgraded to a 64-bit PC with Windows 8 and followed the same instructions and used the Universal Printer Driver downloaded from Samsung but all I got was the printer to 'wake up' but it printed nothing (a direct USB cable connection worked fine).  I finally got the printer to work by;
    1. Windows 8 Control Panel
    2. Device and Printers
    3. Right click on the newly installed printer
    4. Click on the Device Options tab
    5. Selecting the Printer Model drop down and selecting Samsung ML-2010 Series followed by Apply
    When I went back to the General Tab and clicked on Print Test Page, the printer woke up and printed the test page
    Cheers, R

  • Windows 7 32 bit installation problem

    My Lenovo g50-30 with pentium n3530 inside shows bluescreen while & after installing Windows 7 32 bit. This type of system refuses to load despite all effort and reboots . The notebook is new, it contained freeDOS originally. BIOS update doesn't help, since it can only be made directly in OC. Help required. Ideas fail me.

    I had similar issues from time to time with Windows Vista / 7 - usually worked after I disabled the onboard COM and Parallel ports.
    Good to know yours is working now.

  • Windows 7 64-bit Installation Error "Could not find appropriate listener"

    *11.2.0.1* Installation fails on Win7 Professional 64-bit
    1) Installed software (did not create database initially)
    2) Create Listener via Net Config (no apparent problems here)
    3) Added DB to Listener via Net Mgr
    4) dbca fails in final portion of DB creation. Error states: *"Could not find appropriate listener for this database. Configuring DB control requires database to be registered with at least one listener.*
    My Listener services is started.
    All current updates have been applied to Win 7.
    I have searched around and found similar issues that seem to center around adminstrator rights, but I have not been able to make any progress.
    C:\Users\scott_hp>lsnrctl status
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 10:16
    :11
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.195)(PORT=1522
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date 20-FEB-2012 09:47:07
    Uptime 0 days 0 hr. 29 min. 7 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\oracle\app\scott_hp\product\11.2.0\dbhome_1
    etwork
    \admin\listener.ora
    Listener Log File c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\
    alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.195)(PORT=1522)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "mmodb.192.168.0.195" has 1 instance(s).
    Instance "mmmodb", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully <gphmh>
    Edited by: svk1965 on Feb 20, 2012 7:17 AM
    Edited by: svk1965 on Feb 20, 2012 7:22 AM

    svk1965 wrote:
    FIXED!! *Thank you very much.* I followed your instructions, renaming listener.ora, before the lsnrctl start. I then waited and ran dbca and walked through the configuration screens and this time it processed through to 100%. But I am not sure I understand what caused the issue??
    C:\Windows\system32>lsnrctl stop
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 11:34
    :24
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.195)(PORT=1521
    The command completed successfully
    C:\Windows\system32>lsnrctl start
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 11:36
    :51
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    Starting tnslsnr: please wait...
    TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
    Log messages written to c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\al
    ert\log.xml
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SCOTT-HP)(PORT=1521)))
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date 20-FEB-2012 11:36:56
    Uptime 0 days 0 hr. 0 min. 5 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Log File c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\
    alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SCOTT-HP)(PORT=1521)))
    The listener supports no services
    The command completed successfully
    C:\Windows\system32>lsnrctl status
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 11:39
    :30
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date 20-FEB-2012 11:36:56
    Uptime 0 days 0 hr. 2 min. 37 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Log File c:\oracle\app\scott_hp\diag     nslsnr\SCOTT-HP\listener\
    alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SCOTT-HP)(PORT=1521)))
    Services Summary...
    Service "mmmodb.192.168.0.195" has 1 instance(s).
    Instance "mmmodb", status READY, has 1 handler(s) for this service...
    Service "mmmodbXDB.192.168.0.195" has 1 instance(s).
    Instance "mmmodb", status READY, has 1 handler(s) for this service...
    The command completed successfullyThe db instance will register itself with the listener every minute or so. When you first start the listener, it will have to wait until the next cycle of the instance self-registration before it (the listener) knows about the db instance.

  • ITunes causes Windows Vista 32 bit to hang

    Whenever I have tried to do anything that involves video with iTunes, regardless of whether my new video iPod is connected, my machine grinds to a complete halt after several seconds.
    It starts with iTunes not responding, then explorer stops responding to mouse actions, then all other applications stop responding and all I/O appears to cease (no hard drive activity, no keyboard input acknowledged, no response to a quick press of the power button, no network activity). I've not got a BSOD - maybe I've just given up waiting before one appears.
    I have tried removing and reinstalling Quicktime and iTunes and the problem remains. I had manage to add a load of video podcasts to iTunes but now that means I can't open it at all because as soon as it starts/finishes downloading something it kills my machine.
    Some help would be greatly appreciated.
      Windows Vista   P4 3Ghz, 2.5GB DDR2, Radeon X1950 PCI-E, 500GB SATA RAID0

    Hmmmm. Unfortunately, most of the helpful documentation and discussion i've seen about the RAID issues has related to the Intel Matrix Storage Manager drivers, and most of the SATA documentation and discussions relates to PCs with nVidia video cards (and/or other nVidia componentry).
    I had a quick check at ASUS, and it looks like it might be worth doublechecking to see if your BIOS is up to date. (Some of the BIOS updates they are listing there mention improved SATA compatibility and performance.) But I'm a bit uncomfortable about that advice, since there's a P5SD2-X and a P5SD2-X SE motherborad being listed there.
    so it might be prudent to doublecheck your motherboard model prior to any attempted BIOS upgrades. This ASUSTek document may be of some assistance:
    Where to find my model name?
    Once you've established to your satisfaction what particular model you have, here's links to the two different model pages:
    Model: P5SD2-X
    Model: P5SD2-X SE
    If you're at all uncertain as to how to proceed with this, please check in on the ASUSTek FAQs and forums for the relevant Motherboards. (There's links to the left of each of the model pages.) I don't have an ASUS motherboard myself, so they are going to be in a better position to give you focussed advice on the process.

  • Premiere elements 9 and windows 7 64 bit, installation and startup

    Installing pre 9 on my Dell Studio x64 with the mcAfee software did not work.
    I had to use msconfig to use selected start without mcAfee security center and adobe software, plus other software that had photoediting - before that I could not start photoshop elements or premiere.
    After installation got through, I have not been able to use premiere elements.
    When I start for the first time I get message that only a small part of the software have been installed and that I need to download the rest from the internet - yes or no for reply.
    Clicking yes gets me to the page  http://www.adobe.com/se/special/premiereel/downloads/ (swedish) and clicking on any of the links launches a new windows, givit the choices to continue to download test-software or purchased software after log-in.
    The premiere elements 9 windows shows nothing, it's is empty with the exception of the menu.
    On the menu I can only make choice to a new projekt or open a projekt.
    I have contacted support but I need to phone them on a weekday, but I work all day and do not have the software at work.
    Any suggestions?

    What happens if you go to the menu in Premiere Elements and select File, then New?
    Otherwise, I'd definitely recommend you replace McAfee as your antivirus. It's known to conflict with certain programs.
    Both Avast! and Microsoft Security Essentials offer FREE versions. They work at least as well -- and they don't cause program conflicts.

  • Windows Oracle x86_64 bit Installation Error

    Hi,
    I am installing a new system on Windows Server 2003 Enterprise R2 x64 Edition and Oracle 10.2 as the database. The product is R/3 Enterprise 4.7 X 1.10 SR1.
    According to the note 899111, I have taken the Installation master for R/3 4.7 X 2.00 SR1 and the export CD's from R/3 4.7 X 1.10 SR1.
    I have installed the Central Instance successfully, but while
    installing the database instance, I get the following error -
    CJS – 0030 Assertion failed : OraCommonParatersWin.
    computeDependantParametersAfterDialog: sapdataHome is empty after dialog
    Also, the database home field (with the drop down) is empty in this screen (after clicking next this error occurs).
    There were 2 notes - 969696 and 919106 which had the same error but the scenarios didn't apply to us.
    Please help me and let me know why this error is occuring, I have restarted the database instance installation several times and even downloaded the Master CD twice from the marketplace in case the file would have been corrupted during the download the first time.
    Thanks,
    Neha Bhardwaj

    Hi,
    you already checked folloiwng note which is for NW04s
    Note 919106 - SAP NetWeaver 7.0 SR1 Installation on Windows: Oracle
    this error occured during installation.
    but i suggested that you try folloiwng solution.
    CJS-00030  Assertion failed:
    OraCommonParametersWin.computeDependantParametersAfterDialog:
    sapdataHome is empty after dialog.
    Solution:
    Change the following line in the 'control.xml' file from
        if (!OraBackRel.isBackRel(dbSid) || "DB" == instanceType ) {
    into
        if ( "DB" == instanceType ) {
    Then restart SAPinst and choose "Continue old installation".
    regards,
    kaushal

  • Windows Oracle x86_64 bit Installation

    Hi,
    I am installing a new system on Windows Server 2003 Enterprise R2 x64 Edition and Oracle 10.2 as the database. The product is R/3 Enterprise 4.7 X 1.10 SR1.
    According to the note 899111, I have taken the Installation master for R/3 4.7 X 2.00 SR1 and the export CD's from R/3 4.7 X 1.10 SR1.
    I have installed the Central Instance successfully, but while
    installing the database instance, I get the following error -
    CJS – 0030 Assertion failed : OraCommonParatersWin.
    computeDependantParametersAfterDialog: sapdataHome is empty after dialog
    Also, the database home field (with the drop down) is empty in this screen (after clicking next this error occurs).
    There were 2 notes - 969696 and 919106 which had the same error but the scenarios didn't apply to us.
    Please help me and let me know why this error is occuring, I have restarted the database instance installation several times and even downloaded the Master CD twice from the marketplace in case the file would have been corrupted during the download the first time.
    Thanks,
    Neha Bhardwaj

    already handled in SAP on ORACLE

  • How can i print photo's from my computor to my photosmart 7515 windows vista 64 bit with updates

    How can i print photto's from my computor to my photosmart 7515 hp 
    OS vista 64 bit

    Hi,
    You can print from iPhone that means your printer is connected to a wireless network and definitely you can print from your computer which has wireless (or using USB cable).
    Now go to the following site to download driver and applications for it and install them on your pc/laptop:
      http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5096​...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for