Photosmart C4795 won't print (most of the time)
I have a Photosmart C4795 installed on two computers, one with XP, the other Vista. The installation(with the Vista computer) went smoothly, along with all tests and some documents of my own, and on the XP one. After a few months it started giving me a "paper not found issue". I discovered I needed to push hard enough to get the paper in far enough, but not too far. Now (on the XP computer) it says its printing, pulls in the paper and then sits until I get an error message on my computer. I went through all the guided solutions and none worked. The XP computer is an HP Mini 1000, and updating HP doesn't change anything.
This question was solved.
View Solution.
I managed to get it working by sending the document a second time, then cancelling the errored print job on my computer, and after it was cancelled on the computer cancelling on the printer. The moment the paper ejected I placed it on the paper tray at a point an inch away from where I was told to in the animations. Then it started on the second print job and worked (it stopped because I only had one page, but resumed when I placed the paper at the same spot and pushed OK.) If the whole problem was in fact where I was placing the paper I wish the animations would show proper positioning.
If anyone needs assistance or clarification on how I made it work again please reply.
Similar Messages
-
My printer will NOT print most of the time.
Help me make the printer get the message from my laptop!!! My light on the printer just flashes. If I shut down and restart my laptop most of the time it will then print out my info. My printer is a HP D1660. My laptop is a Dell Inspiron with windows 7
Hi. Go to this link http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02114788&cc=us&dlc=en&jumpid=reg_R1002_USEN&lc=... and download the PDU and run it.
Feel free to provide Kudos if I have helped you! -
E-mail won't send most of the time
Ever since my Touch upgraded to the v. 4 firmware I've had trouble with sending e-mail. I don't have as much problem receiving mail...sometimes I can only preview my messages and but most of the time I can open received messages. For a while I couldn't send mail (I use Yahoo and the Touch already had the server settings for it), then after a couple of days it suddeenly started sending again. Now it's not sending! So aggravating!!
The error message says "The connection to the outgoing server "apple.smtp.mail.yahoo.com" failed. Additional Outgoing Mail Servers can be configured in Settings>Mail,Contacts,Calendars." This seems silly because it works - just off and on! Does anyone else have this issue...any solutions? Thanksmajorv~
I am having the same problem. I have an ipod touch that worked fine up until the 4.0 firmware. The only thing I have noticed with mine that it was glitchy when it came to sending mail (which I use yahoo). Then most recently it stopped sending altogether. My isp is verizon & I have an airport extreme. I noticed today I can bounce off of a neighbors linksys wifi. Now I have no clue who their isp is. It's either verizon or comcast. Regardless I was able to send mail using their internet. Mine on the other hand is a no go.
I too am *extremely frustrated*. I have deleted my mail accts several times in hopes of it fixing the problem. I also updated to the latest firmware of 4.1 in hopes of it resolving the issue. I even tried using other smtp servers with no luck.
I hope someone out here has a solution to this problem. It is very frustrating. -
Macbook Pro won't start most of the time; freezes constantly.
I always come to these forums for answers and I've always found them, so I thank you in advance for everything you do. Unfortunately, I can't find an answer for this one...
My Macbook Pro 13" (early 2008?, maybe mid-2008?) had a weird thing happen this morning where a whole bunch of applications froze up. I could still move the mouse, though. It got so bad that I just shut my computer down by holding the power button. When I tried to restart, it came up with a gray screen and nothing happened. Then I tried it again, and it couldn't find the startup directory (folder with question mark). I then restarted the computer and held down option, specifying the start-up directory as the hard drive. It accepted the command, but didn't start up, so I was forced to power it down again. I then tried to repeat this, but when I pressed the option key just after start-up, it just shut down immediately. This happened several times.
Some hours later I got the computer to start up again after using the restore disk (option, then select), and reinstalling Mavericks. I was able to run disk utility, which showed no problems with the hard drive. I looked at console and I'm getting constant error messages for a variety of reasons:
2014-05-18 17:03:24 -0700 kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8022fc0000
2014-05-18 17:03:29 -0700 kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8022fc0000
Note: The above smcReadKeyAction ERROR comes up basically every 5 seconds
2014-05-18 17:03:03 -0700 com.apple.launchd.peruser.501[228]: Throttling respawn: Will start in 10 seconds
This one also comes up all the time.
error=Error Domain=AOSErrorDomain Code=5002 "The operation couldn’t be completed. (AOSErrorDomain error 5002.)" UserInfo=0x7f8f9bd256c0 {HttpStatusCode=401, DialogInfo={
AlternateButtonLabel = "";
AlternateButtonLink = "";
Body = UNAUTHORIZED;
DefaultButtonLabel = "mme.setupservice.SetupServiceJS.OK";
DefaultButtonLink = "";
DialogType = PasswordDialog;
ErrorID = UNAUTHORIZED;
Header = "";
HelpLink = "";
description = "These account credentials are unauthorized.";
localizedError = UNAUTHORIZED;
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
This one's much longer but I didn't want to post too much text.
2014-05-18 16:39:12 -0700 WindowServer[150]: disable_update_timeout: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
2014-05-18 16:39:12 -0700 Console[252]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.
2014-05-18 16:39:13 -0700 xpcproxy[277]: assertion failed: 13D65: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2014-05-18 16:39:14 -0700 kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8022fc0000
2014-05-18 16:39:15 -0700 WindowServer[150]: common_reenable_update: UI updates were finally reenabled by application "SystemUIServer" after 4.45 seconds (server forcibly re-enabled them after 1.00 seconds)
2014-05-18 16:39:15 -0700 WindowServer[150]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
2014-05-18 16:39:18 -0700 SystemUIServer[256]: Cannot find executable for CFBundle 0x7fe59b4ae3c0 </System/Library/CoreServices/Menu Extras/Clock.menu> (not loaded)
2014-05-18 16:39:18 -0700 WindowServer[150]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 3.40 seconds (server forcibly re-enabled them after 1.00 seconds)
And that one happened on startup.
I'm running the computer right now, and nothing has gone wrong, yet. Of course, the error messages are still there, so I don't think anything has changed, I'm just trying to run as few applications as possible and I'm only on this website.
I ran EtreCheck also:
Hardware Information:
MacBook Pro (13-inch, Mid 2009)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
OS X 10.9.3 (13D65) - Uptime: 0 days 0:11:21
Disk Information:
Hitachi HTS545016B9SA02 disk0 : (160.04 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 159.18 GB (32.18 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS23N
USB Information:
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.13) Support
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.13) Support
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.8) Support
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.8) Support
[not loaded] com.logmein.driver.LogMeInSoundDriver (1.0.0) Support
[not loaded] com.novamedia.driver.IceraUSB_MSD_Bypass (1.3.0) Support
[not loaded] com.novatelwireless.driver.3G (3.0.13) Support
[not loaded] com.novatelwireless.driver.3GData (3.0.13) Support
[not loaded] com.novatelwireless.driver.DisableAutoInstall (3.0.13) Support
[not loaded] com.option.driver.Option72 (2.15.0) Support
[not loaded] com.option.driver.OptionHS (3.26.0) Support
[not loaded] com.option.driver.OptionMSD (1.21.0) Support
[not loaded] com.option.driver.OptionQC (1.11.0) Support
[not loaded] com.vodafone.driver (3.0.9) Support
[not loaded] com.vodafone.driver.Data (3.0.9) Support
[not loaded] com.zte.driver.cdc_ecm_qmi (1.0.1) Support
[not loaded] com.zte.driver.cdc_usb_bus (1.0.1) Support
[not loaded] de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1) Support
[not loaded] de.novamedia.driver.NMUSBCDCACMData.VTP (3.2.6) Support
[not loaded] de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2) Support
Startup Items:
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[not loaded] com.logmein.logmeinserver.plist Support
Launch Agents:
[loaded] com.google.keystone.agent.plist Support
[loaded] com.hp.help.tocgenerator.plist Support
[failed] com.logmein.logmeingui.plist Support
[not loaded] com.logmein.logmeinguiagent.plist Support
[not loaded] com.logmein.logmeinguiagentatlogin.plist Support
[not loaded] de.novamedia.VodafoneDeviceObserver.plist Support
User Launch Agents:
[failed] [email protected]
[loaded] com.divx.agent.postinstall.plist Support
[failed] com.mlbam.nexdef.plist Support
User Login Items:
iTunesHelper
Skype
Dropbox
Internet Plug-ins:
o1dbrowserplugin: Version: 5.3.1.18536 Support
OVSHelper: Version: 1.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.3.0 Support
Silverlight: Version: 5.1.20125.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.2 Support
Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
AdobePDFViewer: Version: Unknown
DirectorShockwave: Version: 11.6.4r634 Support
Safari Extensions:
Ebay Shopping Assistant: Version: 1.1
Amazon Shopping Assistant: Version: 1.1
Slick Savings: Version: 2.0
DivX Plus Web Player HTML5 <video>: Version: 2.1.2.145
Searchme: Version: 1.3
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Eyephedrine: Version: (null) Support
iVisualize: Version: 1.5
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User iTunes Plug-ins:
TuneUp Visualizer: Version: (null) Support
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
Move-Media-Player: Version: npmnqmp 071705000010 Support
3rd Party Preference Panes:
DivX Support
Fan Control Support
Flash Player Support
Flip4Mac WMV Support
Perian Support
Time Machine:
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Time Machine not configured!
Top Processes by CPU:
7% mds
4% Console
3% WindowServer
0% fontd
0% Dropbox
Top Processes by Memory:
143 MB com.apple.IconServicesAgent
98 MB mds_stores
94 MB softwareupdated
78 MB Dropbox
66 MB Finder
Virtual Memory Information:
531 MB Free RAM
1.48 GB Active RAM
1.27 GB Inactive RAM
493 MB Wired RAM
1.59 GB Page-ins
0 B Page-outs
I get the sense that there's a lot of crap on this computer that I ought to get rid of, but I'm not sure if this is causing the problem.
Also, I just installed 10.9.3 yesterday.
Thanks again for any help you can provide!Well, the computer stopped starting up at all. It could never find the operating system. I tried safe mode and virtually every other non-standard start-up option. I then did target disk mode with another MBP and got the message: "The disk you inserted was not readable by this computer." I then tried using disk utility and it couldn't retrieve retrieve the data using restore (writing to an external drive). I suspect that this means the hard drive would need to be replaced. In your expert opinions, is this necessarily true? Could this still be just a software problem, or perhaps some other piece of hardware?
Part of the reason I ask is that this laptop is now nearly five years old. It's needed a new battery for two years. If it's a virtual certainty that the hard drive is toast, I don't want to pay $150 for someone to take it out and try to recover any remaining data from it, only to reveal that the data is indeed irretrievable (since the computer itself is probably only worth $300-400 at this point). The nearest Genius Bar is also more than 2 hours away. Am I going about this the right way by using disk utility, given that the hard drive won't mount to the desktop of the other computer? If the hard drive can't be reat in target disk mode, does that confirm that it is the hard drive?
Thanks
Oh also, it does still make the startup noise, even though I can't run the AHT since I can't get it to start up in safemode. I thought this mean that it passing various hardware tests. Does this not apply to the hard drive?
Message was edited by: Euain_ *add-on* -
Wifi with Login pop up or page won't work most of the time
Free wifi with login areas don't work anymore on my machine after a couple of uses. I haved used them in these locations before and know the signal is strong and they are working and other people are able to connect. What happens is the login window or page won't load after a few times. I"ve tried several things after reading throgh several disscussions with this and no success.
1. I tried making a new wireless location and a new dns. Dosn't work.
2. I tried spoofing my my mac adress (dosn't work)
3.Clearing out all the cache and system files using onyx (this worked at first and after a restart I would get the login window but now no longer works)
4. Referesing the browser and or clearing cache and restarting (dosn't work)
5. I tried disabling the fire wall and making sure all the java and browser pop ups are open.
This is a huge problem as I work from home as a web developer and designer but have to wait anther two weeks for internet at home and can't use the free wifi. My cell service barly works in my appartment but barley and is costing a fortune. Any help on this issue would be greatly apreciated. Apart from buying a pc I'm not sure what to do.
Thanks again for anyone posts,
Macbook Aluminum Duo 2, Late 2008 on 10.8.5
SNOne of the free wifi services I can use will work if I turn off the ocsp and crl from the keychain preferences. Apparently there apple put this in place and it can cause problems with the pop ups from the free wifi services. It still only works with one of the free services with this disabled and apparently opens up security issues.
-
Z10 Remember app won't load most of the time on 10.1.0.2006
I just upgraded to 10.1 and the Remember app mostly doesn't work. I opened the app at 6:13 and it greeted me with the spinning circle "wait" graphic. It's now 6:22 and it's still doing that. One of the reasons I stuck with Blackberry is the epic fail of Evernote and the times I've written something important in Evernote only to get a "memo updated externally" message from evernote that wipes extremely important text, measurements, etc.... However, Remember is sorely lacking too, and not as good as the separated tasks and memos in the previous instances, and it needs to load pronto.
Is there any other alternative since Remember doesn't work any more?
I just did kill Remember after 8 minutes of the stuck wait indicator and now it came up after reloading it. But it seems that off a fresh reboot, Remember can't come up on it's own successfully, ever. I don't want to bang on Blackberry and ask if they test or we're all the guineapigs, but come on, as a user I shouldn't be able to list 40 bugs in 5 minutes, and more if you push it and give me more time. The old OS was never like that since I started using BB in 2006.*Resolved.*
On the previous day I was trying to fix my soundcard somehow, inside the laptop. It looks that some cable makes no good connection after that. I think it was the display cable.
Now the laptop works. I can get more successfull turn-ons now. -
Our customer have 3-4 windows machines in local area network (No Domain Login) with different OS versions and platform architecture (32 / 64 bit)
I have no idea about the configuration of machine to which printer is hooked up but it is running Windows for sure.
This machine is accessible from any other machine in LAN. They have another machine running Windows 7 64 bit OS on which they have installed the printer connected to earlier machine using local printer driver installation
with local TCP/IP port being selected during installation. Installation goes well, printer gets installed successfully and shows ready state. but when we try to print anything on it takes 2-3 minutes to complete print job. They have tried
this on printers with couple of different model and make but the result is same delayed printing. They have also tried to install different printer drivers like HP printer model specific driver and HP universal driver too , but the result is
the same in all cases. earlier when they were using 32 bit XP machine with printer installed same way that they installed now for win 7 64 , there was no issue seen with regards delayed printing. is this a issue with windows 7 64
bit printing system ? or it has to do something with mixed and matched (32/64 bit )printer drivers running on different machines on LAN ?
I will try to get more information with regards to the machine to which printer is connected.In the mean please revert back to me if any one had face similar issue and able to resolve it successfully.
Thanks in Advance.Hi,
Have you tried ping ip address of printer? and check if there exists any data lost in network connection. If your network connection is crowded, it can cause delay for printer.
Also, please attempt to disable all security software temporarily, such as antivirus, firewalls,etc and
clear all printer cache.
Locate to task manager, check the state of spoolsv.exe, including cpu and memory. If it has high cpu or memory usage, it may be caused by malware. Thus, you'd better to make a full scan with the latest anti-virus.
Karen Hu
TechNet Community Support -
Ever since I downloaded OS X Mountain Lion on my iMac, the Safari won't open. It loads half way and then stops. Same thing happens when we try to open a web page. If I restart the computer, it will then work. What is going on? What can I do? Help!
It will but it's only a temporary fix, ideally you should get a large external drive and move your photo library to it, do this (info)
Apple Menu>About This Mac>More Info>Storage, you will get a graphic that looks like the one below, post it here. -
My new hp photosmart 7525 won't print
my new hp photosmart 7525 won't print and says it is "offline". In addition, the tray app error keeps coming on. I uninstalled my old printer. I have Vista.
Hi @hannabanna
I would like to help you print to your 7525. Let's first address the tray app error, then we can focus on the printer offline message.
The tray app error seems to be stemming from the older software you have uninstalled, it appears something did not fully uninstall. Please complete the following steps.
Please note; I simply choose the printer I did for steps 3 because of the version of software, we will not be installing this printer, I only want to use it to perform a comprehensive uninstall.
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Download the software and choose to save as, save to desktop > HP Photosmart C7280 All-in-One Printer
After the software downloads and extracts, open the temp folder again, use the instructions from step 1.
Look for, and open the folder starting with 7z (Example: 7zS2356)
Open folder Util
Open folder CCC
If you have an HP computer run the L3uninstall.exe. If you have anon-HP computer run the L4uninstall.exe
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /unregister, and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /regserver, and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
Restart the computer
Download and run the HP Printer Install Wizard for Windows
The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
Step 14 will help you to re-install the 7525. Once the 7525 is re-installed, please try printing. If you get the printer offline message, use the following document; 'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
Please let me know if this resolves the issues, and or is you require further assistance. If you still get the tray app error, please let me know which printer you had before that you recently uninstalled. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
HP Photosmart C6380 won't print entire page
My HP Photosmart C6380 won't print entire pages. Some lines near to the end of the page aren't printed. Once in a while it prints the entire page.
This question was solved.
View Solution.I think the problem has been solved. Thanks!
-
My Photosmart C410 won't automatically connect to the Network
My Photosmart C410 won't automatically connect to the Network, I have to put in my password for the router every time I turn on the printer from the printer keyboard. Is there anyway that the printer will automatically connect to my network?
Tell me about your network - router brand/model, encryption type (WEP, WPA, etc) and ISP type (DSL, Cable, etc).
When you turn off your printer, are you totally removing power from it (like shutting off a power strip)?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
My HP Photosmart 6520 won't print from my chromebook. It use to, but now it won't.
My HP Photosmart 6520 won't print from my chromebook. It use to, but now it won't. Please help!
Hello,
Is your printer connected to a wireless network with Internet access?
Do other web services work on the printer? Meaning, can you use ePrint or the Printables on the front panel? (printables = apps on the printer like Disney, Menu Planner, Quick Forms, and so on.)
Miles
HP Employee -
Shared printer not working (most of the time)
I have a Mac Pro running Snow Leopard using a shared Epson R380 printer connected to a G5 (running Leopard) . Most of the time it doesn't work, but occasionally it will. On the Mac Pro, the Epson monitor says "print job accepted" but doesn't change. On the G5, the Epson monitor shows the print job, but says "job stopped". When trying to resume the job, a warning box pops up on the G5 saying "Operation C0uld Not Be Completed - client-error-not-possible".
The shared printer works fine (most of the time, too) with another networked Mac, a Mac mini G4 running Leopard.
All OS's are the latest possible.Sharing between Leopard and Snowleopard does not work reliably. For this reason, we do not recommend mixing Operating Systems.
Hope this helps,
Syd -
iPhoto says themes are missing and it won't print. All the support says to reload the application but I didn't get disks with the iMac. What do I do now.
This is the ipod touch forum.
Try posting in the ipod nano forum. -
Photosmart 5200 won't print black ink
Hi there, I purchased the printer just over a year ago. It hasn't been used much at all. For the last few months I have continuously changed the black ink cartridge as it is saying it is empty or low and it still won't print black. The colour functions fine. I have tried all the settings options of cleaning and aligning and it doesn't make any difference. I only print via air print from iPhone and iPad, and the documents sent are extremely basic word docs. The printer is in perfect condition and I am out of warranty. Please can you advise how to fix as I rely on the printer for my invoices! Thanks
Hello,
Since you have replaced Black ink cartridges and tried performing Clean Printhead and issue still exists, i'd suggest you to call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.
Maybe you are looking for
-
HP Officejet 6600 Fax Problems
I have an HP Officejet 6600 and cannot fax to local numbers or some out of state numbers. I can fax to HP out of state and towns other than my own. Is this due to it being sent digitally? Can the machine be set to fax analog? I have ATT-Uverse for
-
Read statement from 2 different internal table.
Hello, I am new to ABAP and try to work out these statements. Please can someone help me in correcting the code. Requirement is 1. I have Sales Header Table 2. Sales Item Table. Both the above table has Doc_number as the key filed and both has CREATE
-
Video too dark on batch capture
I have a Canopus ACVC110 converter for importing analog video sources that's hooked into one of my firewire ports. When I go to log and caputure my DVD player menu (ie. the one that says "JVC") looks fine in the preview window. However, once I play t
-
Setting a default initial value to a CHAR type field in a custom table
Is it possible to set a default initial value to a field in a customer table(Ztable) that is not SPACE? SAP sets the initial value to " " space for datatype CHAR. I am looking at creating a field in a table that would always default to 'X' on creati
-
Dreamweaver CS3 , ASP page. Access database. Successfully created a recordset but am unable to enter a repeat region in table to show records. Symptom - Dreamweaver closes when there is any attempt to insert a new or edit and existing repeat region.