PhotoSmart C5180 updating firmware

Hi, I have a C5180 all in one, and I am trying to enable web services. The problem is there is no wireless or web option menus in the computer control panel. So I figured I need to update the firmware. I cant find a option to update the firmware either. Can someone help me figure this out.
Thanks

Captain09 I hope you ar doing well and welcome to the HP forum;
You can get the latest sofware here for your printer CLICK HERE
If you are using Win 7 run this tool it may help you find any issues, GO HERE
Hope this helps !
RobertoR
And remember . . .
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Similar Messages

Imac os x 10.6.8 no scanner loaded message with HP photosmart c5180 despite downloading software updates

When I open the scanner window on the imac, which should bring up the HP photosmart c5180, it gives a message that no scanner is loaded. I have dowloaded the software updates . What else should I try?

How much RAM is installed in your iMac?
How Full is your internal hard drive?
Are you sure you are saving Time Machine backups to an external drive like Apple's Time Capsule drive?
Running any antivirus software of your iMac? Running any "crapware" like special hard drive "cleaning" utility apps?
Do you have extended AppleCare on this iMac?
It is also possible your internal hard drive is failing.
If this hard drive is a 1 TB size drive, it could be a Seagate hard drive. The 1 TB Seagate drives have defects and are covered for free replacement, by Apple, under their Seagate hard drive replacement program until this April 12.
You can find out if your iMac is eligible for the replacement program here.
http://www.apple.com/support/imac-harddrive/

Trying to update firmware on my canon printer MG5320 but in doesn't recognize the printer being plugged in via USB cable

I am trying to update firmware on my canon printer MG5320 to be able to use the airprint feature but in doesn't recognize the printer being plugged in via USB cable. I have tried restarting the macbook, turning on and off the printer, repairing permissions, deleting and redownloading the update what else can I do? The prinyrt works fine otherwise...

If there are no drivers for Yosemite you might be in trouble.. HP will tend not to support printers once they are EOL.
Getting it running over wireless rather than USB might be worthwhile.
Can’t connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Has the printer been working and now failed after update.. what update caused the failure if that is the problem??

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

I want update firmware 2.9 but apear this message "This software is not supported on your system."

hi
I want update firmware .details my system is
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro9,2
Processor Name:          Intel Core i5
Processor Speed:          2.5 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache (per Core):          256 KB
L3 Cache:          3 MB
Memory:          4 GB
Boot ROM Version:          MBP91.00D3.B08
SMC Version (system):          2.2f38
Serial Number (system):          C1MHQC17DTY3
Hardware UUID:          EF0C6F81-20AD-50FA-9DD5-C8E084DF8E8C
Sudden Motion Sensor:
State:          Enabled
but when install the last update MacBookProEFIUpdate2.9 i got error like this
"This software is not supported on your system."
please help me thanks

OK, so the firmware is the same as mine, and yet Apple Support offered this EFI and SMC update packages, which should give a message that our computers are updated.
However, the update packages fail to run.
Did Apple neglect to give the correct update for the mid-2012 issue of MacBook Pro 13-inch? I have the i7 Intel processor, instead of the i5, and I was sold this unit as having two processors, but the System info only lists a single processor.
Is one of the problems with Intel-based MacBook Pro units that the integration wasn't without bugs that cause processor hang when running the OS Lion, even with updates to 10.7.5?
Shouldn't the EFI and SMC updaters run on these machines as stated in the Apple Support article?
What will Apple do for these customers?

How to install OS 9.2.1 on G3 with no OS; says needs updated firmware, how?

I am trying to install OS 9.2.1 in an old G3 which at present has no OS in it.
The screen says it needs updated firmware to do so. When I try to follow instructions, it tells me the CD is locked, which is obvious since it is an installation CD. Other instructions seem to assume there is already an older OS in the machine to update. Anyone with an idea of how to break this log jam?
[email protected]

Hi wmarina !
Welcome to the Discussions, and Happy Thanksgiving!
The only G3 that will give you a Firmware Update warning when trying to install OS 9, is a Blue & White G3 tower.......
If that's what you have, then getting OS 9 onto it is a bit of a Catch-22, Can o' Worms, P.I.T.A., or whatever other favorite sayings you may have for a difficult job........
"Other instructions seem to assume there is already an older OS in the machine to update."
Very astute observation, and 100% correct.
The OS that is assumed to be on the B&W's drive is MINIMUM 8.5.1, and therein lies the Catch-22.....
A BOOTABLE 8.5.1 Install CD is NOT available as a RETAIL CD........
The Retail CD is 8.5 install, with the 8.5.1 UPDATER, which is also on the CD.......
The 2nd part of this problem is that the Firmware Updater (which is on the OS9.1 CD) MUST be run from the booted Hard Drive with 8.5.1 on it.........
Your options are:
1. Find a set of the ORIGINAL SOFTWARE CDs that shipped with a Blue & White G3, and install the original OS from there.........
2. Do what I had to do. Take out the Hard Drive and move it to an older Mac (i.e. Beige), and install OS 8.5 on it, and update it to 8.5.1, take the Hard Drive out and re-install it into the B&W again, boot to it, and do the Firmware update at that time.........
Note that NO Mac can boot to an EARLIER version OS than it shipped with when new, which is why you will have to use a beige to install 8.5.1 to that hard drive........
As a secondary note, to avoid more problems, get a new Pram battery (1/2 AA 3.6V).
Available at any Radio Shack.
Good Luck !
Kevin
G3 1.1Ghz B&W, Digital Audio G4 Dual 533,G3Beige,8600/G4-800, 7600/G3-300, 6200 Ret. Mac OS X (10.4.3) ATI RADEON MEs: 7000, 9200, 9800, nVidia ? 64MB

HP Photosmart C5180 won't scan to computer?

I want to scan a picture to my computer so I can later email it to someone. I put the picture in the front right part of the scanner as directed, but when I clicked on Scan Menu, the only options were Scan and Reprint and Scan to Memory Card. There's no option to scan to the computer. I really need these pictures scanned tonight.

Hi marisam,
Welcome to the HP Forums! I see that you cannot scan to your computer with your HP Photosmart c5180. I am happy to help! I have a few questions for you:
What Operating System are you using? Windows or Mac? What version?
Can you make copies with the printer?
Is the power cable plugged into a surge protector or directly to the wall outlet?
In the meantime, if you are using Windows, please try our HP Print and Scan Doctor, and let me know what happens.
Hope to hear from you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

What is new in Nokia 6500s update firmware ver. 6....

What is new in Nokia 6500s update firmware ver. 6.6?
Nokia N73. V 4.0812.4.0.1 Code: 0529786
Nokia 6500 Slide V6.6 code: 0556234

After updating mine yesterday...da screen refreshes or so flickers every say 5 seconds...plz any help
i have reinstalled it three times... ..still no solution
Message Edited by prubyholl on 04-Dec-2008 07:20 PM

Can't print to HP Photosmart C5180. getting error mssg that says, "Because a USB device was drawing too much power from your computer, one or more of our USB devices have been disabled." Never seen this before. How do i fix this?

can't print to HP Photosmart C5180. getting error mssg that says, "Because a USB device was drawing too much power from your computer, one or more of our USB devices have been disabled." Never seen this before. How do i fix this?

Get a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

I receive a 0xc18a0301 error message on a Photosmart c5180 all in one

I receive a 0xc18a0301 error message on a Photosmart c5180 all in one
I try the reset prosedures listed on the hp website no solution work
last option saids service the product
what its the procedure if any to service the unit
ATT
Alex

next time just said buy a diferent brand...

Can not update firmware on Officejet Pro 8610

Can't update firmware on Officejet Pro 8610, Hp update site shows available firmware update needed, disabled firewall, shut off wireless, run program, window for update appears, but checkbox greyed out. I've talked to HP Tech, He was positive newer firmware was available, I've tried starting in safe mode w/networking, disabled, MS Security essentials turned off,etc. Have Dell Dimension, excellent running, Windows 7 Home Premium, Xfinity cable network modem (very fast), I'm getting frustrated.
Does anybody have a suggestion? Thanks, Jim

Hi @jwhite8150 , and welcome to the HP Forums!
I see you're having issues updating your firmware. I would like to help!
Before we start I have a request.
Press Setup on the front panel of the printer, and select Reports. In the reports menu select Print Status report. On that report, please let me know what firmware version is listed.
Thanks!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

After installing Snow Leopard I can no longer "save photos on computer" after inserting a memory stick to an HP Photosmart C5180 All in 1 Photosmart C5180 All in one

Hello,
When I insert a memory stick into my HP Photosmart C5180 All in one and I try to "save photos on computer" the printer reads: "You need to install device software". This all started happening after I installed Snow Leopard on my Mac 10.6.8. Can someone please advise on what I need to do?

Typically it's a good idea to uninstall any devices attached to the Mac before doing an upgrade. This prevents problems that can be caused by the upgrade. Below are the instructions for uinstalling and reinstalling the printer. I'm also going to include a link to the full feature software and drivers for the printer. Let me know what happens.
Uninstalling the Printer Software
Installing the Printer Software in Mac OS X v10.6 Snow Leopard for a USB Connection
HP Photosmart Full Feature Software and Drivers - Mac OS X v10.6
I am a printer tech for HP.

HP Photosmart C5180 Will no longer feed 8x11 Photo paper from main tray

My C5180 all in one will no longer feed 8x11 photo paper from main tray. Rollers slip and will not pull paper in. Any suggestions?
583seve

Hi @583seve
I see youa re having some difficulty with your Photosmart C5180. The following document addresses both out of paper messages and issues with paper pick; 'Out of Paper' Error Message Displays and the Product Does Not Pick Up or Feed Paper.
If the issue persists, you might consider trying the steps in a paper jam document. Although you may not be experiencing a paper jam, the steps in this document may be all that is left to try; 'Clear paper jam, then press OK' Error Message Displays on the Control Panel.
I hope this helps, but if after all your efforts the issue remains, I suggest calling HP. They may be able to offer you a discount on a newer model as part of a trade in trade up option. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Problem with hp photosmart c5180 and printing from computer

Hello, I have windows 7 and an hp photosmart c5180 all in one printer, at first, I couldnt scan anything to my computer, so I reinstalled the software and drivers for windows 7, and it scans now, but the printer doesnt respond to the computers command to print anything, it kept saying it had expired ink, so I bought new ink, and it still doesnt work, could somebody help? Any answers are appreciated.

Try the steps in this document, depending on your operating system:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&tmp_task=solveCategory&lc=en&dlc=en&cc...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Competition problem between Windows 8.1 and Windows 7 on Photosmart C5180 connected via LAN

Hello everyone, I am writing because I need some advice / help on a problem last night while configuring a small network.
The network is made up as follows:
2 notebook: Windows 8.1 and Windows 7
3 different printers:
2 USB connected to the respective notebook,
1 HP Photosmart C5180 network printer connected via LAN via a router.
The situation is the following:
both notebooks recognize the various printers and are able to send and print documents but,
when the print command starts from both notebook SIMULTANEOUSLY or at a distance of a few seconds, the only document printed is ALWAYS the one sent from the notebook with WINDOWS 8.1. The other one submitted by WINDOWS 7 IS LOST without being reported.
So if I ask of you is someone experienced in the print queues, print drivers, competition in the print jobs that can help me in solving this problem.
Thanks in advance

Hello cesco,
Welcome to the HP Forums.
I see that you are having a communication issue when attempting to print on two separate printers at the same time.
This will be a communication issue for sure. The computer can only send to one printer at a time. You will have to print to one printer, wait for it to finnish the print job and then send it to the other printer.
There is no way that you can print from one computer to two separate printers at the same time.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

PhotoSmart C5180 updating firmware

Similar Messages

Maybe you are looking for