Photosmart C6180 Wired and Wifi not working together

I recently reinitialized my Photosmart C6180 all in one. Since then I can either use it wired or wireless, but not both at the same time as was the case before. Wireless printing works fine when I unplug the network cable. Once I plug it again, it stops printing wirelessly.
The printer name on the network is HPC61890. I can see it assigned an IP address in my router for both the wired card (.34) and wireless radio (.35). The IP for wireless can only be pinged when the cable is unplugged.
Any idea how to fix this?

Hi Danyk,
I would like to help you with your connection issues. You can connect your printer wireless (on a network) and via USB. But you cannot connect wireless and wired (ethernet). Once the ethernet is plugged in it automatically turns off the wireless.
If you could tell me what operating system you are running I can send a link for the up-to-date software and drivers.
Thank you,
I worked on behalf of HP.

Similar Messages

Ethernet and wifi not working on g6 1318ax

Sir, my laptop is HP g6 1318ax. When I buy this lap I installed windows 7 but now format it and installed windows 8. But after installing the windows 8 the ethernet port and wifi not working. I download and install hp recommend drivers for win8 but it is not working. Please help me to solve this problem.

Hi: Below are the links to the PCI and touchpad drivers. http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110518-1&cc=us&dlc=en&lc=en&os=4132&product=5278311&sw_lang= http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110512-1&cc=us&dlc=en&lc=en&os=4132&product=5278311&sw_lang= Unfortunately, I don't know why the wired network adapter isn't working. I'll give this one more try and if this driver doesn't work, then I don't have any idea why. http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4132&swLang=13&mode=2&taskId=135&swItem=ob-110949-1

I buy a new compaq presario cq57 408tu but its bluetooth and wifi not working even installing driver

i buy a new compaq presario cq57 408tu laptop , but its bluetooth and wifi not working even installing all driver

Hey there. You didnt state what operating system you are using but I was able to find two articles that should help resolve your issue.
Troubleshooting Your Wireless Network and Internet Connection (Windows 7)
Fixing Bluetooth Issues
These articles will go through all the basic troubleshooting steps. Let me know if this helps resolve the issue at all.
Thanks!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Z3 bluetooth amd wifi not working together

hello , the bluetooth and wifi is not working together, when streaming videos through wifi and audio is connected to the bluetooth outspeaker , wifi connection drops for 30seconds and re-connecting , Sony please fix this bug.. than this phone is good. till now.

Hi I had the same issue a Week back with my Sony Xperia Z3 compact -- Model # D5833.
An auto software update in lollipop and the Wifi and Bluetooth stopped working.
After speaking the the customer service expert (on chat) --Xperia Support center-- initially he advised me1. To start the phone in a safe mode -- (press the power button for 3-4 secs you get the option) but that didnt help.2. Next he asked me to do a repair through Sony Companion which I had installed on my laptop --- did it --reinstalled the whole software after wiping the complete software including cache--but to no avail.3. Finally when he had no solutions left.. he asked me to show it at the authorized Sony service center as it was under warranty.
I followed his instructions as did not want to experiment with my 7 months old handset, went next day to the Sony authorized Service Centre India (Mumbai) (17th Aug'2015) they said its a software problem and needed a day to rectify. But when I called them the next day to check on my phone status, they shared its a hardware problem and have sent across to another center which will do the hardware repair and will take maximum a week. So the week is going to end after a couple of days....I will keep you guys posted on the update. The suggestion which I would like to share is, if you are having a similar problem run and go to the authorized service centre and leave the rest to the experts, without experimenting yourself.
So once I will receive my handset in a weeks time ....I will share you the status....on the exact issue with the device.

Edege animate: Parallax and Spotlight = Not working together?...

Hi all,
This is my first post, and sorry for my English :))
I am learning, and have a small composition on Edge Animate CC 2014 on Scrolling Parallax, which works very well, and now I want to add a spotlight... but do not working together.
My code is:
Stage: 1920 x 2000
Autoplay: No
-- creationComplete: (nothing)
-- compositionReady:
EC.Parallax.setup(sym);
On scene:
A Text (is for launch the spotlight with the click function):
Action for "Text":
-- click
// Open image in spotlight overlay
// Set up configuration
var config = {
width: "1024",
height: "768",
type: "image",
source: "images/dog.jpg"
EC.Spotlight.open( config );
My problem is that the parallax works great, but when I make a click on the button that showing the spotlight... this is not released, and "dog.jpg" picture it is show on the bottom of the page (without spotlight).
What am I doing wrong?
Note: I charge via url the "All in One" of EdgeCommons CDN : http://cdn.edgecommons.org/an/1.1.2/js/min/EdgeCommons.js
Many thanks!

Ok. I've solved. I needed to load some things:
EC.Parallax.setup (sym);
The full code (that works for me) is:
-- compositionReady:
EC.Parallax.setup(sym);
// Load Edge Commons
yepnope({
load: [
"http://cdn.edgecommons.org/an/1.1.0/js/min/EdgeCommons.js",
// Load style sheet for the overlay
"http://cdn.edgecommons.org/an/1.1.0/css/style.css"
-- click
// Open image in spotlight overlay
// Set up configuration
var config = {
width: "1024",
height: "768",
type: "image",
source: "images/dog.jpg"
EC.Spotlight.open( config );
I hope to serve others.
Regards

Network controller& USB controller driver not found and wifi not working

hello I Purchased HP 15-ac025TX (M9V00PA) Notebook laptop . i have installed all driver from HP site here is the link  http://support.hp.com/in-en/drivers/selfservice/HP-15-Notebook-PC-series/7771404/model/8326084#Z7_3054ICK0KGTE30AQO5O3KA30R1  but still netwok controller driver not found also wifi not working i installed blutooth drivers too . I am using window 7 sp1 (32 bit) For network controller device ID is PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C&REV_01 secondly univeral serial bus driver(usb) controller not found i installed all drivers from above link also update windows but still no solution hardware id of usb controller is PCI\VEN_8086&DEV_9CB1@SUBSYS_80C2103C&REV_03  and last i am unable to download AMD/Intel Switchable High-Definition (HD) Graphics Driver. the download link not working KINDLY RESOLVE THE ISSUE THANK YOU

Update: While the driver I knew would work has not shown up yet, I did some detective work and explored some other broadcom wireless card driver folders from some HP links, and I found one that should work for you. While it says it is for HP desktop PC's, they put the exact same wireless card form factor in a desktop PC that they do in a notebook PC. I see no reason why this driver would not work, since the setup information file contains the same hardware ID that you posted. Here is a partial copy and paste of the driver setup information file and you can see the hardware ID you posted is supported by this driver.  x86 - Win7
[BROADCOM.NTx86.6.1]
    %BCM430N_DeviceDesc% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_2230103C
    %BCM430N_DeviceDesc% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_22D3103C
    %BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_2232103C
    %BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_22D4103C
    %BCM430N_DeviceDesc_HPY% = BCM43XNG_NT61, PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=cp_149257_1

IPhone 4s Getting Hot for no reason and wifi not working help?

The otherday my phone was in my pocket and I could feel it getting hot, so I pulled it out of my pocket and noticed it was a lot hotter than it should be, after noticing this I noticed that my wifi was not connected so I checked SETTINGS<WIFI and there was no connections, the little icon just kept spinning and spinning, so then I toggeled it off and on, no luck, turn airplane mode on and off still no luck, I even toggled of my mobile data no luck.
I preformed a reboot, (held both lock and home button together) and checked again, NOTHING.
I then turnt it off for 10 mins ( held lock button slid red icon across) and the phone got colder and then the wifi started working again.
then last night it did it again, I have taken the phone out of its case and changed the charger(just incase these were affected it), I then tried everything again, it helped but not for long, tonight it has done the same thing so I thought nothing of it, il just do what I had previously done,
BUT NO! not even resetting network settings helped, neither did erasing all data, neither did placing the phone into restore mode, restoring via itunes and then setting the phone up as new, just incase the backups contained software glitches causing the wifi not to work.
I have been screen shotting the phone in and out of charge showing no wifi connections are showing for proof for when I take it to the apple store thursday (everyother day was fully booked).
Being that my phone still is covered by apple care, Ive got proof that it is defective/tempermental(incase it starts working again and then stops) and obviously they can have a look at it, take it apart or whatever i dont care I want it fixed! but will they replace it?(the whole phone) and also will it be for free as ive still got apple care warrenty and it is hardware problems?
ALSO i never had any problems with 5.1.1 so I hope if i get a replacment it will be 5.1.1 as I wont update until 6.0.1 is stable enough

*also, i have just reset all settings again and my wifi connections have appeared! this is taking the P*** now apple sort it out!

Ethernet and WiFi not working in browsers

We have about 13 iMacs and 3 MacBooks connected to our LAN network. Earlier this afternoon, one of our iMacs (20 inch early 2008) would not connect to Firefox or Safari internet browsers. However, I was able to log into our practice management system, which requires an internet connection. I went into System Preferences and ran a diagnostic test on the network which didn't show anything. I even turned the WiFi on and connected to our wireless network and could not connect on Safari and Firefox. I took one of our MacBook Airs and connected hooked it up to the ethernet cable used on the iMac that wouldn't connect and it worked without issue. I checked our Netgear switch, all cords are securely connected and everything is light up as it should be. Just wanted to see if anyone had any other suggestions before I called either the company who set up our network (who rarely return my calls) or take it in to be serviced (closest place is about an hour away).

Why not try a Repair Disk?
Boot to the Recovery partition, run Disk Utility and have it Repair Disk.
http://www.apple.com/osx/recovery/

Bluetooth and wifi not working

my wifi and blue tooth is not working and i could not turn on my bluetooth , i tried reinstalling my drivers ,went to change pc setting and tried to turn on my blutooth bt its not happening. i tried to restore my system to earlier point then also it didnt worked,please help me asap .

Hello , Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that you are having an issue with your WiFi/Bluetooth, and wanted to assist you! Please review the following documents, as they may help to resolve the issue for you:HP PCs - Troubleshooting Wireless Network and Internet (Windows 8)HP PCs - Understanding and troubleshooting Bluetooth wireless technology (Windows 8.1, 8, 7, Vista, XP)HP Pavilion and ENVY Notebook PCs - PC Does Not Connect to Wireless Network and Yellow Icon Next to Bluetooth Device in Device Manager (Microsoft Windows 7, 8, and 8.1) Please let me know if this information was helpful by clicking the thumbs up below.
Have a great day!

Internal Mic and Bluetooth not working together at the same time

Okay.. so I've been noticing this happen alot lately. Whenever I have my usb wacom tablet plugged in (which is almost always), there would be no internal mic input and bluetooth would become "not unavailable". Also, even when I try an external mic, there was no input. Could this be a coincidence or some related usb-bluetooth problem? Could it be my audio input or tablet driver problem?
I've used my mic to skype before I had installed the tablet. Also before I used garage band to record my sister's guitar with an external mic, there was no problem at all, and of course I didn't have my tablet plugged in at the time. Recorded a whole hours worth of music, and didn't have any problems.
Today.. I checked to see if my internal mic was working before I launched skype, and it was working perfectly, and I also noticed my bluetooth was available (didn't test it though). Then I went on skype talked to friend for about 20min, and suddenly the audio stop working. I had my tablet plugged in from earlier today. I restarted my macbook (with no tablet plugged in) and still mic input isn't working. I tried and external mic, but still nothing. I tried uninstalling skype, still nothing.
This is not the first time this happened, I noticed it would somehow fix itself after a few days every time, and mic and bluetooth would start working again out of nowhere. Which makes it even more weird.
Need help pleaseee!
PS. I tried getting someone to fix it before(a few months ago- I don't really use my mic or bluetooth much), but when I brought it in and started up my mac, at that time it was working again. But now it isn't working =(

UPDATE: I just noticed my bluetooth was no longer "unavailable", so I quickly went into system preferences, and noticed that my internal mic input had some input! Very weak though, only 1-2 bars. So what does this mean?

HT1695 Bluetooth and wifi not working

Hi all
I have an iPod touch and for some reason the wifi and Bluetooth has stopped working, I have done a full restore and reset the network setting but to no avail. For reference my iPad and iPhones are working perfectly, the software is up to date. Any body found a solution to this?

Is this the problem?
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If so it is frequently a hardware problem an an appointment at the Genius Bar of an Apple store is in order.

Help Please! Genius AND WiFi not working on iPod

Hi, I'm using a first gen touch on the latest firmware. even though i have genius on iTunes, it will not transfer onto the iPod. There simply is no genius button. How can I get this working?
Also, on an unrelated note, my WiFi is completely shot. The little scroll thing will pop up for about a second than disappear, even in places where ive been using the WiFi for as long as I've had the iPod, which is about one year! I've never had any problems with the WiFi until I upgraded to 2.0 and above, does anyone know any solutions? I've reset the settings and network settings, and neither of these worked. Any help?
Any help would be appreciated!!
Message was edited by: romeboards

reset your network connection. I think it's under general settings. Same thing happened to me, and that fixed it

Safari and QuickTime not working together - still....

Just to report further on this issue of Safari giving a Q with a ? in it when trying to play QT content. I have tried all the offerings of solutions in the older threads to no avail and hoped that upgrading to Leopard would solve the problem, but no. I then upgraded to QT 7.3 that came out this morning but no still don't work. I would have thought that a big a problem as this is for a lot of people would have been solved by now.
So anyone else still having problems?
Anyone any more ideas, because Apple don't seem to...

OK as to older threads this one sums most of them up...
http://discussions.apple.com/thread.jspa?threadID=883810&tstart=135
I have;
Leopard,
Safari v3.0.4,
Flash Player 9 from Adobe downloaded yesterday,
QT Pro version 7 with the 7.3 update.
My Mac Software Update is up to date.
System Prefs/Quicktime/Advanced - Flash NOT enabled & MIME settings at default
As to pages with QT content,
http://www.apple.com/getamac/ads/ (Sound, NO video content)
http://www.adobe.com (main masthead is a QT +?
http://www.motogp.com (main page consists of 18 QT+?)
plus any other I try...
Anything else you need just ask and tx!

Optical drive and HD not working together in 1.67GHZ 15" G4

I have G4 Al 1.67GHz Powerbook that I am unable to make the Optical drive be recognized when the internal HD is connected. If I put the HD in an ext Firewire enclosure and boot from that, the optical drive works fine. I have tried two Motherboards, different flex cables on both drives, different HD and Optical but no change. I did have to load the HD in a 1Ghz 12inch G4 PB since I do not have a newer OS version than 10.4 and I have seen that the 1.67GHz requires 10.4.2. However, I loaded the drive and upgraded it to 10.4.10 before installing it in the 1.67Ghz. It seems to act like a IDE master/slave conflict. I also found an older optical drive that allows you to set the drive as a Master, slave or for cable select. When I set it to slave, it work just fine. the problem is I would like to use the PB with the original UJ-846 Superdrive it came with.
Is it possible that this is a problem with the software load?
Any help would be much appreciated.
Doug

Hello.
I have a similar problem on my al powerbook G4 as well. I have a UJ 845e superdrive. It was working just fine, but since I installed Leopard (10.5.1) it stoped working. if i insert a cd or a dvd, it will spin it for a while before rejecting it.
Can you help me with that ???

Webcam and daqmx not working together

Hi there,
I have a vi that uses serial-to-usb connections, to acquire data and control external machines. I added a "subcode" to use a webcam for monitoring, it worked fine. then I added another "subcode" to communicate with a USB6009 daq to acquire an analog voltage. So now I can either acquire video from the webcam, or acquire voltage from the daq, but not both. And it's not me who decides what to acquire, it is the vi, the first run it acquires video and ignores the daq (voltage graph is empty), when I abort and run the vi again, it ignores the webcam, and acquires from the daq.
All this happens with no errors.
P.S. the first time I ran this VI it worked properly with video and daq, and that was the only time!
Anyone knows what's happening?

hi StephanieO
Unfortunately I cannot post the complete code (NDA agreement) but I will post different parts of these modules, that should give you an idea about the libraries I used.
Attachments:
image001.png ‏18 KB
image003.png ‏19 KB
image005.png ‏14 KB

Photosmart C6180 Wired and Wifi not working together

Similar Messages

Maybe you are looking for