Photosmart C6280 Grinding Noise while printing

Hello everyone,
Own a HP Photosmart C6280 printer. It jammed once but after unjamming the printer has been making a grinding noise (metal-on-metal) whenever I start to print. On occassion it goes away but comes back quickly.
Is there some alignment problem with some of the shafts, gears, etc in the printer that can be easily fixed, or will it require a trip to the shop?
Appreciate the help!

HI there,
The printer may require servicing however first we can use this article that covers paper jams to inspect the various points that could cause the sounde. Check the gears and rollers to ensure there are no debris and that they are clean. Let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

My printer HP Officejet pro 8600 plus makes a lot of noise while printing

My HP officejet pro 8600 plus, makes a lot of noise while printing, ink levels are ok, and printing is ok. it was makiing lines before but not anymore

Hi,
Check first if the printer is connected directly to a wall outlet.
Check if the carriage is moving freely and there is no obstructions inside the unit.
Clean the paper rollers once.
See if doing these helps you
Thanks
I am an HP employee, these posts are according to my knowledge and HP is not responsible for it.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution
I work for HP.

Photosmart C6280 All-in-One Printer Will not acquire IP Address

I have happily had a Photosmart C6280 for some time now, however I recently replaced my router and my ISP Cable Modem (NetGear WNDR 3700 and Cisco 2100 respectively). At first everything was wonderful. Sadly, my NetGear router went bad and I had to return it. As it stands right now my printer will not take an IP address from the router. I have tried everything I can think of, several times and nothing has changed. I have uninstalled and reinstalled the software on the Windows 7 and XP machines that I'm using. I have tried to manually set an IP address but on my printer when I'm done inputting all of the information there is no "enter" option. Looking at the Connectivity Status page it states : Network Interface Adaptor Summary
Name                                              Type                                                 Status
Eth0                                                 Wired(802.3)                                 Disconnected
IP Status
Name                                             Type                                                 Addr.    Source
Eth0                                               Wired (802.3)                                  Disconnected
Note: Automatic or manual IP address assignment only occurs for an adaptor if it is currently connected.
Wired (802.3) Adapter Information Detail
     Configuration
Enabled at power on:    yes                                                                                            Link Config: Auto Link Speed
Auto Crossover: On                                                                                                         Auto of Manual IP Address : Manual
Manual IP Addressees: 192.168.1.12                                                                            Manual Subnet Mask: 255.255.0
Manual Default Gateway: 192.168.x.x                                                                         Auto or Manual DNS Server: Manual
Manual Primary DNS Server: none                                                                                 Manual Secondary DNS Server: none
---------Status---------------------------------------------------------------------------------------------------------
Adaptor Name: Eth0                                                                                                         Adaptor State : Inactive
Adaptor Connection Active: False                                                                                 Adaptor MAC Address: 00:21:xx:xx:xx:xx
Link Status: Disconnected
I have tried two different print servers and nothing. I am at the end of my rope and any help will be greatly appreciated.
                                                                                                                           Thank You
                                                                                                                             -ndrdog

On the front of the printer: Setup > Network > Reset Network Defaults.
Now, set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wired along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 254 (the last number in the address). If you do not know this, enter the current IP address.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Leave the gateway and DNS blank. Click 'Apply'
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Photosmart C8180 Squeaky noises when Printing

I have a Photosmart C8180 all-in-one printer. When I hit print and the wheels or mechanics of the printer start to move, I get horrible squeaky noises. It's not from the paper tray or photo tray but somewhere else. It happens a lot during the process of the printing before printing actually takes place and once it's done. The noises are getting worse. Any suggestions on how to get rid of this noise? I am worried my printer will break down if not taken care of soon. I print a lot of photos but these noises also happens when printing documents.
Thanks for any suggestions.

Hi - Assuming you're in the US, you can call 866-234-1377 for service related options. As for parts for the printer, you can go here to find the parts that are avaialble for the C8180. I don't have any idea which part(s) would need to be replaced. If you're interested in going that route, you might start a new post with that question specifically and see if another user on the forum might have some experience with parts replacement on the C8180.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

NOISE WHILE PRINTING (SPRING/METAL ALIKE SOUND)

HI,
WE ARE USING AN HP OFFICEJET 6500A PLUS PRINTER, IT'S BEEN 2 WEEKS NOW SINCE THE IRRITABLE SOUND STARTED.
IT IS A LOUD SPRING LIKE SOUND WHEN PRINTING. I TRIED CLEANING AND ALIGNING BUT DID NOT WORK. I HAVE CHECK PAPER JAM PROCEDURE ALSO BUT STILL FAILED. I TRIED MOVING THE CARTRIDGE MANUALLY, IT IS NOT MOVING.
I OPENED THE PRINTER AND CHECK WHAT IS THAT SOUND, THERE IS SPRING JUST AT THE BACK OF THE CARTRIDGE I TRIED MOVING IT, IT IS THE SIMILAR SOUND THAT IS COMING PUT WHEN PRINTING.
WHAT CAN I DO TO STOP THIS ANNOYING SOUND?
THERE IS A NOISE WHEN ORINTING, IT WILL SUDDENLY STOP AND A PAPER JAM ON THE SCREEN WILL APPEAR, EVERYTIME WILL CHECK THE PAPER JAM BUT EMPTY. NO PAPER JAM HAPPENING ON THE PRINTER.

Hello SPNGEBOB0212,
Welcome to the HP Forums.
I see that you are having an issue with a very loud sound from the printer.
Judging by the amount of steps that you have already taken, I believe this to be a hardware issue.
I suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

SQUEAKING NOISE WHILE PRINTING ON INJET 2230

HI I HAVE A BUSINESS INJET 2230 AND HAVE CLEANED IT SEVERAL TIME AND STILL HAVE A SQEAKING NISE WHILE PRINTING

Hello SPNGEBOB0212,
Welcome to the HP Forums.
I see that you are having an issue with a very loud sound from the printer.
Judging by the amount of steps that you have already taken, I believe this to be a hardware issue.
I suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP Photosmart C6280 All-in-One Printer CIT248813-HPU-REDBOX-v4.exe error

Using-Microsoft Windows XP Professional SP3, Network connected
In HP Digital imaging monitor: Went to Help>Check for updates Update file CIT248813-HPU-REDBOX-v4.exe downloads, but after it looks like its installing, I then get the following error message :Critical Update to HP Product Assistant Failed. Where do I get the file and download it by itself, to then try and load it outside of HP Digital imaging monitor?
When I do a search for the .exe file, nothing comes up.
Per HP help, I have tried:
Check for updates:
=================
Please visit the weblink below and click on the hyperlink "Automatically check to see if you have the latest software and drivers ". If you do not find any updates for the All-in-one software, then perform the below steps to disable the product assistant in the startup files.
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=228&lc=en&dlc=en&cc=us&product=3194498
Step 1: Enable Passive FTP
====================
1. Open Internet Explorer.
2. From menu options, click Tools.
3. Click Internet Options.
3. Click Advanced tab.
4. Under Browsing section, scroll down and put a check mark next to "Use Passive FTP"
5. Click Apply, and then OK.
Check the functionality. If the issue persists, please perform the steps below.
Step 2: Disable antivirus and firewall
===========================
Please follow the steps to disable the anti-virus and fire wall:
Disable Anti-virus:
=================
1. Look at the very bottom right corner of the screen.
2. You should see several icons.
3. Place the mouse pointer on each icon to see if a strip of text pops
up.
4. If you see the strip of text, it will tell the name of the program
that the icon represents.
5. If you find the icon for the virus protection software, right-click
on the icon.
6. In the pop-up menu, choose the option to disable or close the
program.
Disable the fire wall
1) Click start -> Click Control Panel -> Security ->
2) Under Windows Fire wall option select On/Off Windows Fire wall
3) Click off radio button to turn OFF the Windows Fire wall.
Check the functionality. If the issue persists, please perform the steps below.
Step 3:
=====
Please perform the steps below to update the All-in-One software manually.
1. On the Windows taskbar, click Start , click All Programs , and then click HP .
2. If HP Update is available in the list of programs, Click HP Update to open the HP Update dialog box, and run the HP Update utility to download updates.
Check the functionality. If the issue persists, please perform the steps below.

still having this issue. Can anyone offer any advice? Where is the actual file on my PC? Why won't this load?

Photosmart C6280 Wireless Printing setup on a new Windows 7 - 32 bit machine..

I am able to print wireless with Windows XP machines in my home office on the Photosmart C6280 all-in-one printer. I have installed all of the Windows 7 - 32 bit drivers from hp.com. I have connected the printer and printed successfully through a USB cable with my new machine. I am able to see the wireless printer that I would like to select. However, I am unable to connect to it and print with like I was when it was USB connected.
I receive the following message when trying to select the printer I would like to select ....
"Windows cannot connect to the printer. Access is denied."
Any thoughts or suggestions ??

I have a notebook with Windows 7 and have successfully installed this printer via USB.
I also wish to use it wirelessly as I did with Vista and have gone to Devices nad Printers in the Control Panel to Add the printer wirelessly,
It finds the printer at 192.168.1.2 and installs ok.
When I ping 192.168.1.2 it replies ok
However, when I send a print to it wirelessly it keep giving me an error.
I tried turning off the firewall to no effect.
When I go into the Printer Properties it shows the port as being 192.168.1.2 and is set to Raw.
Please advise what is wrong here.

Windows 7 and Photosmart C6280

I have read that Windows 7 may not allow older printers to function. I am getting close to purchasing a new desktop PC, HP Pavilion HPE h8qe series with Windows 7 and I want to use my HP Photosmart C6280 All-in-One printer with it. Can anyone tell me if the printer will work with Windows 7?

Hi,
Where do you download from ? Is it from the following site ?
http://ftp.hp.com/pub/softlib/software11/COL30665/mp-76043-1/PS_AIO_02_NetWired_Full_Win_WW_130_140....
It's safe to use this site.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Digital Imaging Monitor not seeing Photosmart C6280 on network.

I have put my Photosmart C6280 All-in-One printer on my wired network, and the HP Digital Imaging Monitor does not see the printer any longer. Why?

Hello! Could you please provide more information regarding the issue, such as which operating system you are using? Any additional information will be helpful in resolving your issue. Thanks!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Photosmart C6280 all in one

I have a photosmart C6280 all in one printer. I purchased a HP Envy TS m6 sleekbook with Windows 8.1 OS. Can I use my printer with this computer and what do I have to do to get it set up (ie drivers, software etc) I need good detailed information and how to as I am not very well versed or anykind of a techy. Thank you in advance

Hi ,
The following link will let you download the HP Printer Install wizard, which will guide you through the printer installation process.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02691615&cc=us&dlc=en&lang=en&lc=en&product=319...
-I work with HP, but these comments are my own.

Photosmart C6280 Not Printing Black Ink

HI.
I have 3 of the HP Photosmart C6280 All-in-One Printers and they have now all got the same problem. When I print or scan anything no black ink is printed.
I have tried 3 different ink caritriages including the official hp ones with no luck.
When the printer does a test print, it prints all the other colours except black.
All ink cartirages are full except the pink one. Does this need to be full? It has not been on the other 2 and the black ink has still printed.
Any ideas?
Thanks

I've just spent the better part of my day trying to figure this out with my photosmart C4580.
long story short: I noted the instructions for storage of cartridges when not in use (print at least once/month; if you take a cartridge out, store it in a ziplock: color with nozzles down, black with nozzles up.)
So I just took out my black cartridge and sat it upside down/nozzles up for a while, maybe an hour, until I noticed black streaks.
I put it back into the printer, printed black text & it FINALLY printed black, albeit streaked.
cleaned the print cartridges and now it's PERFECT!!!
give it a shot!

Grinding noises and frequent jams in HP Photosmart 6520

A piece of paper tore in the printer the other day and required a bit of tugging to get both pieces out. Since then, the printer has made grinding noises as it prints and every 2nd or 3rd piece of paper jams. And ALL pieces of paper have a notch or small rip at the same point after going through the printer. I checked under the printer and it's at the spot where a small stick of plastic teeth contacts the paper. I think this piece isn't moving at the right time (I can tell it's on a spring), causing the paper to catch on it as it gets pulled up into the machine. The standard "Paper Jam" routine isn't helping. Anyone have advice for this kind of problem? BTW, the printer prints photos just fine. It's a problem with paper feeding out of the tray. I've also been having frequent network problems with this printer for about a month, but I assume those are unrelated...

Hi , and welcome to the HP Forums! I understand you're getting jams, alongside some grinding noises. I would like to help! I would recommend removing the ink cartridges from the printer, and perform a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar. I would also recommend the steps in the following documents: A 'Paper Jam' Error Displays on the HP Deskjet Ink Advantage 6520 e-All-in-One and HP Photosmart 6520 e-All-in-One Printer Series A 'Carriage Jam' Message Displays for HP Deskjet Ink Advantage 6520 e-All-in-One and HP Photosmart 6520 e-All-in-One Printer Series Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!

Photosmart C6280 Can't bypass the warnings and print only in black

I have a photosmart C6280 printer and i want to print in black only, but i can not bypass the "low ink" errors and "expired cartridge" errors to proceed. I've changed the preferences in my print options to black only but the printer is still flashing "low ink" or "expired cartridge". The black ink cartridge is full and in date btw. I'm afraid of going to buy new colored ink and it still not work, then I'm out of pocket a lot of money and stuck with colored ink cartridges I can't use or return. I've uninstalled and reinstalled the program...still nothing. I'm beyond frustrated.

Hi @hatfieldnomore,
I see by your post that you replaced the black cartridge and aren't able to continue printing. You are unable to bypass the "low ink" errors and "expired cartridge" errors to proceed. I can help you.
The printer can operate only for a short period of time with ‘out of ink’ cartridges. All cartridges must be installed for the printer to operate and they must have sufficient ink for servicing, in order to prevent the printhead from drying out.
I have provided a document for Printing with Depleted Cartridges.
This is for the error 'Ink expiration near' Message Displays on the All-in-One.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Photosmart C6280 not printing color/both sides with Mac

Hello HP Community,
I have a Macbook Pro running iOS X 10.9.2 and a AIO Photosmart C6280. I am have downloaded the printing/scanning software and drivers. Everything installed without problem. I have also scanned with no problem. However, no matter what program I am trying to print from on my Macbook, the printer will not print in color and also will not print on both sides - even when the double sided feature is checked off.
I have been to all the discussion forums of relevance and can't find anyone with my same problem. Those that have similar problems, are running different versions of iOS and the steps suggested they take are not possible with this version. Please Help!

Hello HP_USER,
Welcome to the HP Forums.
I see that you're unable to print in color from you Mac 10.9.2. I will try to help you with this.
Have you tried making a color copy from the printer? If not please do so, this is to see if the printer is having the issue stand alone.
I would also recommend looking at these documents:
Missing, Faded, or Dull Colors
Wrong Colors
As for it not duplexing, according to the User's Guide, this printer doesn't duplex as in it doesn't have a duplexer. If you are manual duplexing that would be slightly different, as it requires you to be flipping the page after the first side has come out. This document can assist you with that: Print on Both Sides of the Paper (Manual Duplexing)
I hope this helps you out, thank you for posting on the HP Forums.
I worked on behalf of HP.

Photosmart C6280 Grinding Noise while printing

Similar Messages

Maybe you are looking for