Photosmart C6280 print hung in queue since new wifi network installed.

I am running Windows 7 on my laptop. I just created a new wifi network and my Photosmart C6280 is attached via cable to the router. Now my print doc from my laptop goes wirelessly to the print queue but does not print. How can I make it begin to print?

rscarbrough wrote:
Yes, it is the selected default printer.
1. Photosmart C6280 All In One
2. Windows 7
3. AT&T U-verse Arris NVG 589
4. When I give the print command to a doc it goes to the print queue but does not print. How do I correct this?
Here something in the router is the printer IP set so that the computer knows what IP to print to? I know on my network printer with a Netgear router I have to set two IP address for both printer so that when I install printer software it knows where to find the printer and set the right print driver to the right printer. Did you do that? I could be that it can't find the printer on the network so that is why it gets stuck in the queue. You have to make a Static IP printer address so the print software knows where to send the print command to.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Similar Messages

Created new wifi network, lost contact with my printer

Replaced an older Time Capsule this week with a new one as my wireless base station and renamed my wifi network in the process.
But now HP Photosmart C4380 can't find my new wifi network.
The printer's network test report says the Network Name (SSID) is not found.
How do I help my printer find it's way home to the new base station network?
Thanks.

Network Printer Troubleshooting
HP – Printer Not Found During Wireless Installation
HP – Wireless Printing Center
If you have the printers IP address open Terminal applications/Utilities and at the prompt type: ping {printerIP}. You will get a reply or failure.

How can i print from my ipad on a wifi network attached printer. Cheers

How can i print from my ipad on a wifi network attached printer. Cheers

If your printer is on this list follow the manufacturers instructions.
http://support.apple.com/kb/ht4356
If is not see if there is an app from the manufacturer or:
I use this: http://www.lantronix.com/it-management/xprintserver/xprintserver.html

Photosmart c6280 - multiple copies and queue jams

I have a Photosmart C6280 and I am suddenly finding I get documents in queue jams, eventually I clear them only to have the problem repeated a few hours later. I am running Windows 7 and have all the updated drivers as advised. This happens in a variety of programs from MS Office to various dtp programs.
I have also now the problem of only being able to print single copies which can be annoying if I want to print say 10 copies of a document produced in Office - Publisher or Word
Any ideas as to how to solve these problems will be welcome

hi,
Try to use these troubleshooting steps, click here.
hope that would help you!
Kiko

Photosmart C6280 print document disappear install under window 7

I have installed Photosmart C6280 under window 7 with the correct driver.
Everything seem okay during installation.
After installation, I can scan with no problem.Print test page from HP diagnosis with no problem.
However,
when I try to print from window, whether word, excel or window test print. The job submitted but nothing printed.
I have tried to uninstall and reinstall the driver but still the same.
Please help
Orson

It is not available with Adobe Reader. You must install Adobe Acrobat.

My ipad2 cannot find my HP A3050 j661b airprint printer although the printer is connected with the same wifi network.Software updates are current on all and my other labtops also work properly with this printer in the same network.Further more it used to

My Ipad 2 cant find my HP3050A j661b airprint printer although the printer is connected to the same wireless network and software updates are current on all and my other laptops also work properly with this printer.further more it used to work with my IPAD2 before when I used the old wireless router but now I changed it to HAUWEI HG231f but I set everything in the same way it was. Thanks in advance.

When you change to the new router, did you re-run the CD to re-set the new SSID and password to the printer.
Otherwise your iPad will not be able "talk" to your printer.

Xerox Phase 6280DN printing does not work anymore over wifi network help

Hello
I am having recurrent printing problems within a WIFI home office network. After power-cuts (which occur frequently here) I can not print anymore from any computer in the WIFI network on a Xerox Phaser 6280 DN.
The printer is seen in the printer list but after clicking print in the printer queue it says "looking for printer" and /or "printing". When I connect the printer directly to a Macbook Pro it will print. Today I have downloaded the latest version of the printer driver of beginning this year from the Xerox support site. However now I can not add the printer to the printer list because it does not show up as an option! I restarted the laptop but this does not help. I have also restarted the airport express and airport base station but no luck. I did so by unplugging and replugging.
The Phaser is connected to an Airport express which talks to an Airport base-station. OSX is 10.6.3. Thanks for any help it is driving me mad.
Helmuth van Es

This is how to contact HP support: www.hp.com/go/totalcare (click on Printers & Monitors, there is a phone number on the resulting page).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Deskjet 3050 J610 unable to connect to new wifi network

Hi,
I have just changed from ADSL to Cable internet and have a new modem/wifi router (Netgear).
I am unable to get my printer to connect to the new wireless router with WPS.
The printed network config page generated by the printer still shows my old network SSID and resetting printer doesn't clear it.
How to proceed?
Thanks

Try here...
Replacing your wireless router
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Why do I lose all my emails in my ipad inbox when i log on to a new wifi network?

Why do I lose all my emails in my inbox on my idpad when I log on to a new wifi account?

No, changing to a different wifi network has no effect on emails. However, if you disconnect your device from icloud (Settings>icloud) and then connect using a different ID (a different icloud account), then you will lose the emails.
I provided info above for both a wifi connection and icloud connection, since you used the expression, "wifi account" and that is not a correct expression to use. You connect to a wifi router possibly using a password, and connecting to icloud is a totally unrelated thing.

How to put time capsule on new wifi network

Hi. I moved and now my wifi network name and password are different. How do I reconfigure my time capsule so that it's on the new network without losing any of my exsting information on it?

The Time Capsule is designed to function optimally when it connects to a modem/router using a wired Ethernet connection.
Are you planning to try to configure the Time Capsule to connect to your new network wirelessly?
In either case, you must reset the Time Capsule back to factory default settings and then set it up again to connect to the new network.
To do this....
Power off the Time Capsule for a few minutes
Hold in the reset button first, and then keep holding the reset button in for an additional 10 seconds while you simultaneously plug the power back into the Time Capsule
Release the reset button after the hold period, and allow a full minute for the Time Capsule to restart to a slow, blinking amber light
Now you can reconfigure the Time Capsule again to connect to the new network....and you can use the same Time Capsule device name and device password that you used before if you wish.
Resetting the Time Capsule only affects the network settings, it will not affect any of the data that you have stored on the Time Capsule hard drive.

OSX 10.9.2 iMac won't scan for new Wifi networks.

Sometimes I will tether the mac to my cell phone (because roomates hog bandwidth). The problem is that when I click the Wi-fi icon in the upper-right hand corner, it shows Wifi networks it has found before but it will not scan for new ones (such as the tether I just started). I have mac laptops and this works just fine on older versions of Mac OsX. Is there something I'm missing?
<Edit> I just found that I can open the "Wireless diagnostic tool" and then choose "Utilities" and then ask it to "Wi-fi scan". It's just hard to believe that something that used to happen with one click is now buried under secret menus and hidden options.

It's just hard to believe that something that used to happen with one click is now buried under secret menus and hidden options.
That is not normal because I am running 10.9.3 on my MBP and it is constantly looking for networks. However, mine is a regular router, not a phone. I could be wrong, but I thought I read that cell providers did not support using computers with their cell network as it wasn't meant for "heavy" traffic - not sure if that could have something to do with your problem.

Adding TC to new wifi network

I have come home and the wifi hub has been changed (due to not working) however i didnt disconnect from the old wifi network and now my TC just keeps flashing amber... I am wanting to know how to add my TC to my new network.
I have tried via airport utilty but it does not pick the TC up....any ideas??

You will need to perform a Factory Default Reset on the Time Capsule and then configure it again to join the "new" network.
See this Apple support document for details:
Resetting an AirPort Base Station or Time Capsule FAQ
The reset will not affect any of the data on the Time Capsule drive.

How to reroute Internet received from WiFi to a new WiFi network?

I have been using large amounts of my Internet allowance playing games on my Xbox 360 (yes Microsoft but I was forced to by friends) and it doesn't need the same amount of Internet as my computer, I want to reroute the Internet that I pick up using my iMac's WiFi and slow it down to around 50kbs and make a new network for my Xbox to run off, I will also be running my iPad off this network.
I know my way around my Mac but I am by no means a expert, please explain in laymen's terms
Thank you
The Supamactman

I have one router that sends the Internet to my computer, what I want to do then is use the Internet from the router and make my own network to share from my iMac. So I need to be able to pick up a WiFi network and share that through another WiFi network via Internet sharing in System Preferences
The Supamactman

Printer not connected since new Windows 10 install. How to fix/

Windows 10 installed yesterday from Wind. 7. Printer worked on only 1 printed then note stated it was not connected tothe computer. No change has been made other than new Win. install. How to get problem diagnosed and fixed?

Take a look at this link.

Photosmart C6280 printer

Everytime I turn on the computer I have to reload drivers and software.

Please read this post then provide some details. What operating system? How is the printer connected - USB, wired LAN, Wireless LAN? Are there any error messages on the printer or computer screen?
Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Photosmart C6280 print hung in queue since new wifi network installed.

Similar Messages

Maybe you are looking for