Photosmart C7280 gives error B03FCC84

Photosmart C7280 gives error B03FCC84 and won't start

I am also getting printer error message oxc18a026. What was the solution?

Similar Messages

HP Photosmart C7280 All-in-One , Mac 0SX 10.6.8 Error message:' pump motor stalled

HP Photosmart C7280 All-in-One , Mac 0SX 10.6.8 Error message:' pump motor stalled' press (I don't recognise the icon!)
What is the button & what is the solution?

Hello, I don't have a floor model of that printer available and the manual for this printer does not mention the pump motor. But I would first try removing and reseating all the cartridges in the printer and power cycle the machine. If you are still getting that error message I would do a hard reset that involves removing the cartridges. No user settings are lost with a hard reset and it is a very common tool used to try to resolve a hardware issue with a printer. To do a hard reset with removing the cartridges:
While the machine is powered on take all the cartridges out of the machine. Close cartridge access.
Then pull the power cord out of the rear of the Product, and then unplug the cord from the wall outlet.
Wait at least 20 seconds.
Plug power cord back into wall outlet and then back in the rear of the printer. It should power on by itself but after 10 seconds or so use the power button to turn machine on
Wait for printer to go through start up process and as it recognizes the cartridges are missing (the display panel will inform of missing cartridges) put them back in their slots.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Error Codes on HP Photosmart C7280

I am getting error codes B03FCC84, B82C9540, B0430194 on my Hp Photosmart C7280 printer. This happens when I try to turn it on when I can get it to turn on. Please help. Thank you.
This question was solved.
View Solution.

HI Doces174,
Unfortunately your printer has a hardware failure codes. I would remove the cartridges from the printer, and then remove the power for about 30 minutes. Plug the power in without putting the cartridges back in and see if the unit comes up. Reinstall the cartridges when the printer asks you for them. If this still doesn't resolve the error messages you will most likely need to replace the printer. You can call our technical support and check into the trade in trade up program at 800-474-6836.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00489814
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Photosmart C7280 errors

I have a photosmart C7280 all in one printer and I am getting a series of errors. First one is that even when not using it the following printer panel lights will all flash; statement; Photo menu; Red Eye; Print Photos; Auto Answer; power Button and card light. Also the printer screen panel goes blue with the following number on it B851FE84.
I have been on the HP support site and tried all the options to no avail - when I tried the disconnect power cable from printer and unplug the power lead, wait 15 secs and then plug it all back in the printer came back on but with a blue screen message on the printer B8080598.
I was using wireless connection but when I started getting these problems I turned the wireless off and hard wired it with an ethernet cable but the errors continued. I have downloaded the HP Diagnostic tool and that does not report any errors. Plus it reported I have the latest driver.
My operating system is Windows 7 Ultimate and I have the latest updates on that.
Can anyone shed some light on this please.

Exact same issue for me as well. I purchased the C7280 printer for my father Dec 2008 and he calls me last week reporting the blinking lights and blue screen.
I find it very unfortunate that HP is not taking the time to at least acknowledge the numerous postings on this issue. Perhaps there is a design issue, which happens with technology unfortuately, but at least give all these customers some response before this goes viral on the net and causes more serious issues for HP.
As it stands right now, I will looking at throwing out a 2 year old printer and buy another. What happended to old HP printers that lasted several years without issue?

Error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working'

error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working' My broadband is BT Infinity with a very strong signal throughout the house and my operating system is Windows XP. My printer will not connect wirelessly to my network, what can I do with respect to the error message 'Wireless Radio not Working'

Hello @GeoffH777 ,
Perfect! You are very welcome, I am very happy to hear the reset helped!
If you have a quick moment, please scroll back to my last message here and click the "Accepted Solution" button, so others can find our thread if they happen to run into the same issue.
Greatly appreciated, have a wonderful day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Photosmart C7280 All-in-one problem printing. Ink System Failure has failed unable to copy--

I'm having a problem printing on my HP Photosmart C7280 All-In-One. The following message is what came up on the printer screen: Ink System Failure has failed unable to copy, receive faxes or print. Refer to printer documentation Error O.cl9a0007.
Does anyone have any suggestions?
This question was solved.
View Solution.

Hey Spider! First off welcome to the forum.
I would recommend removing all the ink cartridges, unplugging the USB cable from the computer that connects to the printer, and then shutting the printer off completely by removing the power cord. Then restart your computer. Turn the printer back on but leave it disconnected from the computer. After it has finished its power on cycle go ahead and insert the ink cartridges back into the printer and be sure to seat them properly.
After you have all the cartridges back in the printer properly then connect it to the computer. See if this resolves the issue. If not post back with any findings.
Thanks,
SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Printer wedding save the dates on HP Photosmart C7280

Not able to print on a 5.75 x 5.75 Wedding Invitation paper with my Photosmart C7280, I have customized the paper source, printer gives me "wrong paper or size" error

Hi there,
Could you describe the steps you go through to get to the error message? I'd like to try to replicate the failure.
Also, congratulations on getting married! I printed all my own wedding invitation envelopes myself as well, so I know how important it is to get them just right.
Regards, CF
I work for HP and hope to make your day Sproutastic!

How do I set my HP Photosmart C7280 to print in black and white unless I request color printing?

I would like to default set my HP Photosmart C7280 printer for black and white printing. Is that possible? What is the process?

Hi there feranski,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP Photosmart C7280 All in One installation problems with windows 8.1

Hi,
I have a HP Photosmart C7280 All in One printer which was working fine on wifi with Windows 8. A few days ago I got the prompt to upgrade to 8.1. Following this the printer would not work at all, and I got prompt/warning message to re-install the printer software. So I went to the control panel and removed all the old HP software, and tried to re-install the latest one from the HP site...to no avail.
I have tried doing this a number of ways - manual download, downloading the HP software that determines what software is required, then downloads it for you....
It seems to start unpacking ok, but then gets stuck on 'Checking System' and never progresses to do anything else. Help!
This question was solved.
View Solution.

Hello Cam77,
Welcome to the HP Support Forums. I see that you are encountering difficulties installing your Photosmart C7280 printer after upgrading your computer to Windows 8.1.
I have included the Windows 8: The Progress Bar on the Software Installation Stops or Stalls document. It will walk you through the steps to get the printer installed.
Please let me know if you encounter any difficulties while doing the above. If you do, please let me know at what step things went awry and what any error messages said. Please also include how you have the printer connected (USB cable, ethernet, or wireless). Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Photosmart c7280 All-in-one Network Issues

Hi, i was given this printer (Photosmart c7280 All-in-one) by my dad about a year ago it worked flawlessly for quite some time. However a few months ago we had a really bad storm and lost power and ever since then I have been getting error messages and my network radio has not been working at all. I am afraid that it might be fried but if i could have any help troubleshooting it at all that would be greatly appreciated! Also, i was reading some other help forum posts and tried to reset it (# and 6 while powering on) and it printed out a connectivity status report by itself. It says "The wireless network interface (Wifi0) is not functioning properly. This may be a problem with the printing device hardware." Again im afraid it might never work again but any help is appreciated! Thanks

Hi,
Since you have tried performing reset and printer status shows as WIFI ICU not working, you can try connecting printer with an ethernet cable and use as a network printer.
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

PhotoSmart C7280 All-in-One Not Responding

Printer = PhotoSmart C7280
Situation #1
Printer screen displays message "Ink System Failure" with error code 0xc19a0035
Situation #2
All lights flash - printer screen is blue with symbol (power) and message b03771de in white.
Is this printer beyond saving?
The printer may have suffered from a sudden power outage prior to these problems appearing.
PC - operating system is not relevant.

The same thing happened to me ... I tried everything. If I turned it off and put it back on it would print or copy but thats it. I finally just bought a new printer. HP officejet pro 8600 e all in one. Stay away from this one if you have to buy a new printer. Its not half as nice as the C7280. No preview when you print and you can't even pick which pages you want to print. A lot of wasted paper and ink! Seems quite a few of us are getting that error message from the C7280, maybe HP did something wrong and should compensate us for the malfuncuntion! Now I wish I didn't buy another HP.

Windows 7 Driver for Photosmart C7280

I am looking for a printer driver for the Photosmart C7280 that will work with Windows 7 Beta.

I too used the Windows 7 compatibility feature to install the following updated drivers on Windows 7 (64-bit):
100_228_PS_AIO_02_Full_Net_enu.exe, (1/1 , 198.44M)
However, I was unable to install any of the updates using the same method. Several of them are listed as critical:
PS_AIO_02_110_008.exe, (1/1 , 15.97M) PS_AIO_02_110_008.exe, (1/1 , 15.97M)
slp_dd_hathi_110_017.exe, (1/1 , 25.29M)
ConvergedIO_HPCOM_V3.exe, (1/1 , 1.53M)
PSE_HpqSRmon.exe, (1/1 , 415.55k)
I am having other errors that are so far unresolvable, so I would really like to be able to install these updates to see if they improve the situation. Also, apologize if those links to the updates did not work - it appears that when I paste the URL into this forum's link window, it does something to break it. The updates can of course be found in the main download page for the C7280, Windows Vista 64 bit.

Model m8530f, no recent changes, blue screen of death. Diagnostic tools gives error code BIOME-1 .

Model m8530f, no changes in weeks, blue screen of death while away. Diagnostic tools gives error code BIOME-1 .

Asamd1st, it appears that this is a memory error. I suggest removing the memory and reinstalling them one at a time. Then, boot to see if the computer runs properly. Do this with each stick.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Photosmart 6510 Printer error message 0xc19a0003.

I have a Photosmart 6510 Printer error message 0xc19a0003. I have re-powered the printer but still get the error message Oxc19a0003. Suggestions to fix?
Thanks!

You are correct, gksurgeon, the 5510 does not have a removable printhead. If you followed the steps in the document above, then the printer will need to be replaced.
If you are still in warranty, HP may replace the printer at no cost to you. I'll link the information to get in touch with them below. The link will take you to a form to fill out. Once you fill it out and it is processed, it will give you the printers warranty information, a case number, and the phone number to call.
HP Technical Support Case Call Form:
http://goo.gl/w7Hgh
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
    created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
     To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

thank's for reply and your help
i did the step's that you told me but i still have the same problem
                                 i have the latest v.11.0.7
i
i disable the protected mode

Photosmart C7280 gives error B03FCC84

Similar Messages

Maybe you are looking for