Photosmart C7280 only takes the first 4 chars of the WPA Key

When I try to set the WEP key on the printer it seems to truncate after the first 4 chars. Some one said that there is a way to reset the printer using a reset button - pressing this might fix the problem.
Any ideas on how I can printer to work again wireless?

How are you trying to enter the key? What operating system? What router are you using?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Not allowing a number as the first char in the username

Is there a particular reason why I am not allowed to create a username with a number
as the first character? Or is this something that can be changed? If so, how
can I go about changing it? I have edited the UsermgmtTools.properties to say:
"disallowFirstCharDigit: false", instead of true... and rebooted the portal, but
it did not seem to make a difference. Any help in this would be greatly appreciated.
Thanks

Oh, I failed to change the field type to "text" in the insert
record dialogue box as well.

How to map only the first occurance to the op in graphical mapping

Hi,
i have a record whose occurance is ' * '.But to the output i need to only map the value of the field which comes in the first occurance of the record.Can anyone help me in this.its very urgent.
For ex :
my input is
<header>
<inp1>123</inp1>
<inp2>hello</inp1>
</header>
<header>
<inp1>456</inp1>
<inp2>hello</inp1>
</header>
To the output field <op1> i have to Map ' inp1 ' field but it has to take the value of the first inp1 i.e "123" only always.Any help on how to do this.
Thanks in advance,
Bhargav
Message was edited by:
bhargav gundabolu

Hi Raj,
My inp structure is:
<header>
<inp1>123</inp1>
<inp2>hello</inp1>
</header>
<header>
<inp1>456</inp1>
<inp2>hello</inp1>
</header>
This has to me mapped to the output structure
<result>
</op1>
</result>
After Mapping inp1 to op1 my structure should appear as
<result>
<op1>123</op1>
</result>
<result>
<op1>123</op1>
</result>
where <Header> node is mapped to </result>.As <result> has to appear as many times as Header appears.But the <op1> value has to be same as that of the <inp1> of the first <Header>

Compare the last Char to the First Char in a Sting

Hello, this should be easy but I'm having problems so here goes.
I get the user to input a Stirng and I want it to compare the last Char to the first Char. I have writen this but StartWith can take a Char?
public static void main(String[] args) {
        // TODO code application logic here
        String strA = new String();
        int length = 0;
        char lastLetter;
        System.out.println("Please input your first String: ");
               strA = EasyIn.getString();
             length = strA.length()-1;
               lastLetter = strA.charAt(length);
       if( strA.endsWith(lastLetter))
            System.out.println("The first letter matches the last");
       else
                   System.out.println("They Don't match");
}I have tried lastLetter.endsWith(strA) but that dosn't work some thing to do with it not taking Char
From reading you can go strA.startWith("R") and that would look for R but you can't put a char in that would be a single letter.
I also tried to lastletter to a string but then charAt wouldn't work.

fixed it I used substring as its a string object any one recomend a better way let me know
public static void main(String[] args) {
        // TODO code application logic here
        String strA = new String();
        int length = 0;
        String lastLetter;
        System.out.println("Please input your first String: ");
               strA = EasyIn.getString();
             length = strA.length()-1;
               lastLetter = strA.substring(length);
       if( strA.startsWith(lastLetter))
            System.out.println("The first letter matches the last");
       else
                   System.out.println("They Don't match");
}

Quicktime movie only has the first song in the play list. after export

when I export an album to quicktime the quicktime movie only has the first song in the play list. The slide show works in i photo with all songs in the playlist but the quicktime only takes the first song and repeats it over and over

I used the garage band method to string the songs together. Then used the mega song to play with my album. and it even exported to the quicktime movie. Thanks for the post.

On my iPad 3, how do I make calendar items lasting more than one day appear as such on the monthly view of my calendar? Right now only the first day of the item appears.

On iPad 3, all of my calendar items lasting more than one day do not appear correctly when looking at the monthly view of the calendar; only the first day of the appointment appears. For example, if I am taking a vacation for 4 days, only the first day of the vacation is marked on the calendar, instead of being listed on all 4 days. When I look at the weekly view, however, it is correct and is listed on all 4 days. The problem here of course is that at a glance, there is no way to look at my monthly schedule. On my iPhone, everything is correct, regardless of month or week view, so clearly this is an iPad problem I guess? Please advise on how this can be corrected. Thank you!

Unfortunately you can't do what you want. Many people have complained to Apple about this. I suggest you provide Apple feedback directly at http://www.apple.com/feedback/macosx.html. They will not provide a direct response but hopefully if enough people provide feedback Apple will fix this.

I am trying to copy and paste a story from a blog. I can only view the first page on the Pages app. How do I see the rest of the pages?

I am trying to copy and paste a story from a blog. I can only view the first page on the Pages app. How do I see the rest of the pages?

Thank you. That helped in the first step. I was able to copy text onto multiple pages.
Now I can't get the pictures to copy. How do I get my pictures to copy?
Also once the blog page is on pages, how do i make changes to it?
This my story and the page I am trying to copy.
http://www.city-data.com/forum/tennessee/359683-going-off-grid-east-tennessee.ht ml
Thanks so much
Lisa(writing) and Mike trying to get it right.

When downloading a file, only the first word of the attached file is included in the 'file name' field, not the entire file name, as it used to.

Regardless of filetype, only the first word of the file is filled into the "Enter name of file to save to..." dialog box. I'm set up to 'save file' in the FF Options > Applications tab for the basic MS and Adobe files. To successfully use/find the downloaded file, I type in the remainder of the file name. Have I overlooked an additional setting? Running FF 18.0 on a Win7 PC.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
A possible cause is that the server sends a wrong response header.
The server may not comply to RFC 5987 and sends a wrong Content-Disposition:attachment; filename header.
* https://developer.mozilla.org/en/Firefox_8_for_developers#Network

Copying and pasting adjustments. When I copy the adjustments of an image, I thought I could then select several images and batch paste the adjustments to all selected images. But instead it's only pasting to the first photo of the selection. What am I do

Copying and pasting adjustments. When I copy the adjustments of an image, I thought I could then select several images and batch paste the adjustments to all selected images. But instead it's only pasting to the first photo of the selected. What am I doing wrong?

Copy and Paste develop settings in Develop mode on multiple photos on the film strip works for me, even with Auto-Sync turned off. Lr5.6 OSx 10.8.5

Acrobat X Std: Mailmerge Word Add-in only emails the first recipient in the Mail merge list

I have a user who is trying to do a mail merge from MS Word 2010 by using the PDF Add-in, whether she selects just to create the PDF's or email them automatically the add-in will say the emails have been sent successfully but only the first address on the WORD mail merge list will have been created/emailed. Effectively only doing one at a time!

Hi,
As the event log indicated, this is due to acrobat pdfmaker office com addin doesn't work well with Microsoft Word.
I would suggest you go ahead and try to upgrade your Adobe product to the latest version and see if issue persists.
Or contact the support of Adobe and see if there is a known compatibility issue or not.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Downloads do not appear all (only the first two) in the download statusbar (could be a ff19 or downloadhelper or unmht problem)

downloads do not appear all (only the first two) in the download statusbar (could be a ff19 or downloadhelper or unmht problem) and none in the download window
used ff19
with
Download Statusbar v0.9.10 by Devon Jensen
UnMHT v6.2.0 by http://www.unmht.org
DownloadHelper v4.9.14
had to revert to ff18.0.2

Make sure that you do not run Firefox in (permanent) Private Browsing mode.
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy: Use custom settings for history
*Deselect: [ ] "Always use private browsing mode"
Did you try to disable other extensions?
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Query only works on the first word of the managed property

I have several managed properties that are not returning query results as expected, they are returning results only if the term queried matches
the first word in the property, any other query returns no results.
Scenario:
filename = "Sample Excel File.xlsx" (OOTB property)
FooOwner = "Martin Zima"
FooSiteName = "Test Site"
If I query filename:Sample, filename:File, filename:Excel (or any combination) they all works as expected. However, if I query "FooOwner:Martin"
it works, but if I query FooOwner:Martin Zima it fails, and FooOwner:Zima also fails. Similarly, if I search for FooSiteName:Site it fails (only CPSiteName:Test works). Everything seems ok in the crawled property and managed property. Can anyone please help?

Hi Martin,
I tried in my envrionment, author:"Rebecca Tu" and
author:Rebecca Tu returned the same result. Please try author:* and see if it will return all the results. If there is no result, then we should check the DisplayAuthor property in Search schema.
In the default search result page, there should be Author refiner in the Refinement. You could use the default one as below:
Regards,
Rebecca Tu
TechNet Community Support

af:table, only the first row of the table is effect

Hi experts,
I have an issue about using the <af:table, needs your help:
1.The default selected line is the first line of the table(This should be ok).
2.Only the first line can react to my manipulate, such as select one line and click delete button.
3.While choosing the other line-->click the command button, the page will be refreshed and the selected one will turned to the first line. (Now the selected row, will be the first row). And will do nothing ,and has no action with the command button.
I have an page OVS_Server.jspx, parts of it is :
<af:table value="#{backVS.serverList}"
var="row" rows="20"
emptyText="#{globalRes['ovs.site.noRows']}"
binding="#{backing_app_broker_OVS_Server.serverListTable}"
id="serverListTable" width="100%"
partialTriggers="poll1 commandButton_refresh commandButton_searchServer"
selectionListener="#{backing_app_broker_OVS_Server.onSelect}">
<f:facet name="selection">
<af:tableSelectOne text="#{globalRes['ovs.site.selectAnd']}" autoSubmit="true"
id="tableSelectOne" required="false">
<af:commandButton text="#{globalRes['ovs.site.server.poweroff']}"
id="commandButton_powerOff"
action="#{backing_app_broker_OVS_Server.powerOffAction}"
partialTriggers="tableSelectOne"
disabled="#{backing_app_broker_OVS_Server.unreachableServer}"
/>
<af:commandButton text="#{globalRes['ovs.site.edit']}"
id="commandButton_edit"
action="#{backing_app_broker_OVS_Server.editAction}"
/>
<af:commandButton text="#{globalRes['ovs.site.delete']}"
id="commandButton_delete"
action="#{backing_app_broker_OVS_Server.deleteAction}"
/>
</f:facet>
<af:column sortProperty="ip" sortable="true"
headerText="#{globalRes['ovs.site.serverHost2']}"
id="column_ip">
<af:commandLink text="#{row.ip}"
id="commandLink_ip"
shortDesc="#{globalRes['ovs.site.viewUpdateDetails']}"
action="#{backing_app_broker_OVS_Server.viewAction}"
immediate="true"/>
</af:column>
<af:column sortProperty="serverName" sortable="true"
headerText="#{globalRes['ovs.site.serverName']}"
id="column_serverName">
<af:outputText value="#{row.serverName}"/>
</af:column>
</af:table>
One JavaBean OVS_Server.java,and part of it is :
public class OVS_Server {
private CoreTable serverListTable;
private VirtualServer selectedServer;
public void onSelect(SelectionEvent selectionEvent) {
selectedServer = (VirtualServer)serverListTable.getSelectedRowData();
public String deleteAction(){
if (selectedServer!=null) {
deleteServerOper.execute();
return "deleteServer";
Would anyone show some lights on it?
Thank you very much.

Thank you for your reply!
But the example you mentioned also has the issue like one of the comments :
"Hi, on selecting the first row it displays the correct value, when navigating to another row still it displays the old value and not fetching the new selected row, actually I can see this on your sample screen shots... is there any way we can fix??"
Is there any resolution?

When I send pdf files to my iPhone 6 , I am only able to see the first page of the pdf file.

When I send pdf files to my iPhone 6 plus (IOS 8.1.2), I am only able to see the first page of the pdf when I open the attachment on the phone.

Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
~/Library
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.

Master-Detail only shows the first record of the Master's data

I have an ADF Master Table, Detail table. I use ExcuteWithParams on the Master Table. When executed from a button (Button has partial submit = true for button, Master Table has PartialTrigger on button, and Detail table has PartialTrigger on Master table and button), it works fine. However, I want to pass the parameters in pageFlowScope variables, and have the ExecuteWithParams invoked upon page load. When I try to do this, the Detail table only shows the first record of the Master's data, no mater what row is clicked on the Master table.
Master table now has no PartialTrigger, and Detail table has PartialTrigger on Master table. In my pageDef, I used an invoke action as follows:
<invokeAction Binds="ExecuteWithParams" id="invokeExecuteWithParams"
Refresh="always"/>
What am I missing? I am using verion 11.1.1.3. Any help would be much appreciated.
Thanks,
Jessica

Yes, it works when I drag the data control as a master detail without filtering any data. I want the user to be able to set search criteria to filter the data in the master table (For example, only pull back data with a transaction date between :startdate and :enddate). I can get it to work if I execute from an executewithparams button on the page, but not if I want to invoke the executewithparams upon page load with the parameter set by pageflowscope variables.
Thank you for responding.
Jessica

Photosmart C7280 only takes the first 4 chars of the WPA Key

Similar Messages

Maybe you are looking for