Photosmart c8180 all-in-one shuts down-restarts repeatedly

My Photosmart c8180 all-in-one shuts down-restarts itself repeatedly. Blue screen message B367A5E0. Have Window XP. Have not been able to locate a description of this error message.

Hi there 57nomad,
To make sure this is not software related try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

I have aHP Photosmart C8180 All-in-One Printer that won't stay on

I have aHP Photosmart C8180 All-in-One Printer that when I turn it on it looks like it is going to start, then the light on the light scribe door goes on and off, it makes a clicking noise then the printer shuts off, then comes back on and does the same thing over and over.

Hello Gr8fulbuck, I see you are having an issue with your printer and I would like to help.
I just need some information from you first. Do you have your printer plugged directly into a wall outlet? Have you power reset your printer? Have you tried to plug it in to a different wall outlet? Have you tried using a different power cable?
Which model of printer do you have?
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01887241
Power reset - http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03177455
Please respond with this information, I would be happy to help you.
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

My HP Pavilion All-in-One shuts down during certain computer games. Any ideas why?

My HP Pavilion All-in-One is a year old, and has started shutting down on certain PC games and on one online game, Wizards 101. Can anyone tell me why or what I can do to prevent this? The games were not from original disks, don't know if that has anything to do with it or not. We have uninstalled them, but may buy originals if this would make any difference. Thanks

Linda, welcome to the forum.
It sounds like a heat problem to me. Most laptops and All-in-ones are frankly not meant for gaming. Also, you could try installing any patches that are available for the games. This could be part of the problem if not the heat.
Please let us know if this solves your problem or not.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Help! All-in-One shuts down :

Hello, I have an old psc 1215 all-in-one printer. It made it's job for a long period of time with success, now I only need it for random prints once in a while so I don't want to buy a new one. The problem is that the printer shuts down when sending the printing command from the computer to the printer. I have tried with two different color ink cartriges: the 57 one and the 28 one. Tried running the HP Diagnostic Utility with no success, it is reporting that everything is fine. My warranty has expired, don't know what to do now. If anyone could help me I would much appreciate it, also, have you ever experienced something similar to this? I tried searching this problem on Google but with no success, it seems no one has ever had this kind of problem.
Thanks in advance and I hope we could figure this out!
P.S. I am using Windows XP SP3 with all the necessary drivers installed correctly.

Also, I suggest you update your software.
Russ

HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are a problem

HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are not allowing paper to feed until several steps are taken first.
(I am using Windows 7. I also use the virtual XP mode and mostly MS Office 2003 docs).
I have had this printer for several years and love it. Before I toss it out, I thought I would check if I could get it to work properly before I buy another printer. Note: I did put in a new HP black cartridge (because it was out of ink) but the printer was not working properly for several days before I changed the cartridge. The printer was at step 5 before ink change.
Lately, each time I turn on my printer, I have to go through the same routine
1. The printer wants to align the cartridges so I push OK
2. The paper feeds into the printer and stops at the exact place to start printing.
3. Error message appears that it is out of paper. So I press OK to continue.
4. It says "aligning print cartridges" runs through 2 sheets of blank paper without trying to do anything and then states "cartridge alignment failed" "Press OK to continue"
5. Screen is now normal and it appears it is going to work.
6. It makes no difference if I used the copy function OR when I send a print job from the computer, the paper feeds into the printer and stops at the exact place to start printing but nothing happens.
7. Error message appears that it is out of paper. OR that it is the wrong size paper. I pull the paper that was at the proper place to be printed from the printer and then the error message says "Paper jam. Press OK to continue"
8. I press OK. The printer will then quickly feed in and eject 2 sheets of paper before it will actually start printing the print job. It will work fine after this as long as I print from the same document.
9. If I want to print a different document then I have to start all over again at step 6 to get the printer to work. If I shut the printer off I have to go back to step 1.
What I have already tried
A. Uninstalled and reinstalled the printer driver direct from HP web site. I have done this several times with both the basic driver download and the complete package download.
B. I have done a partial reset by unplugging the printer, and then re-plugging the printer while pushing the "# and 3" buttons while turning on the printer. I have done this several times. Each time it will work fine until I try a different document of turn off the printer.
C. I have downloaded the HP Print and Scan Doctor and used it several times. It states that "everything checks out OK"
D. I have downloaded the HP Hardware Diagnostic Utility 4.0 but it does not work with my printer.
E. I have cleaned all the rollers and blown air throughout to make sure there were no bits of junk in the paper's path or blocking a sensor.
F. I have tried different brands and weights of paper (all 8½ x 11) but nothing works.
Most of the problems started when I added the printer to the virtual machine so I could print XP files. This may just be a coincidence because the printer has the same problems when I use the copy function without the computer being on.
Thanks for looking at my issues. Any help would certainly be appreciated.

I just tried using Notepad as you suggested and had the same result. Paper feeds in stops at proper place and error message "out of paper"
I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem.
I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner. One for black and one for color. The ink icons would change from completly full to just an outline as the amount of ink went down. Currently the black ink icon is missing
This is a very frustrating problem because the printer works great after doing a few steps to get around the problem. The fact that the problem reoccurs any time anything is changed is the major problem
Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs. This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
I want to thank you for all of your efforts. Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer. As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

HP Photosmart e-All-in-One - B110a : How can I deactivate wireless?

Hi, everyone.
I just bought HP Photosmart e-All-in-One - B110 and after the installation (which went OK), while trying to get acquainted with the printer and the rest of the functions, I pushed the Wireless button out of curiosity.
Now, every time I switch on B110, the Wireless blue light keeps blinking. Does that mean that it's working?
I do NOT want to activate wireless printing (at least for the time being). I want it deactivated permanently. Is there a way to do this?
Many thanks in advance.
This question was solved.
View Solution.

The blinking blue light means it's looking for a network to connect to. It won't connect to a network if you haven't put any info in the wireless setup. I believe there's an option to turn off the wireless radio in the settings somewhere.

HP Photosmart C7280 All-in-one problem printing. Ink System Failure has failed unable to copy--

I'm having a problem printing on my HP Photosmart C7280 All-In-One. The following message is what came up on the printer screen: Ink System Failure has failed unable to copy, receive faxes or print. Refer to printer documentation Error O.cl9a0007.
Does anyone have any suggestions?
This question was solved.
View Solution.

Hey Spider! First off welcome to the forum.
I would recommend removing all the ink cartridges, unplugging the USB cable from the computer that connects to the printer, and then shutting the printer off completely by removing the power cord. Then restart your computer. Turn the printer back on but leave it disconnected from the computer. After it has finished its power on cycle go ahead and insert the ink cartridges back into the printer and be sure to seat them properly.
After you have all the cartridges back in the printer properly then connect it to the computer. See if this resolves the issue. If not post back with any findings.
Thanks,
SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HP Photosmart Premium All-in-one c310a - How to print in black and white

I want to print a color pdf file in b&w on my HP Photosmart Premium All-in-one c310a printer. When I go to "features" -> color options -> grayscale -> in the drop down box, there is only one choice - "high quality". There's no "black ink only" choice as I have seen in forums on similar printers.

If you have the full feature drivers installed for this printer and there isn't a Black Ink Only option under Print in Grayscale, then this printer lacks the feature. Typically the Black Ink Only options follows the drivers for some deskjets and most officejets, because of the office environments they are intended for. Where as Photosmart printers are more aimed at printing photos.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

HP Photosmart Premium All-in-One Printer - C309g dose it support eprinting

dose
HP Photosmart Premium All-in-One Printer - C309g support eprinting and airprinter
This question was solved.
View Solution.

Hello RetiredHP,
Thanks for the post. Ok, we may have several options here. With ePrint, you can use the mobile app. to print from your printer from any location with your iPad or iPhone. If you have downloaded and installed the app., then check the below. If the ePrint app. is not showing (should look like icon below), check the link below these steps. The 2nd link provides some additional information. The key is to ensure that both your iPad and the printer are on the same network. Good Luck!
Figure 3: HP ePrint mobile app icon
If prompted, provide your iTunes account information, and then click Get. iTunes automatically installs the app on your mobile device.
Step two: Activate the mobile app (optional)
Why should I activate the mobile app?
If you activate, you unlock all the features of the HP ePrint mobile app. You can print to any HP ePrint-enabled printer (to which you have been given access) from anywhere your mobile device has Internet access. You can also print Microsoft Office documents and Web pages, or save the Web pages to print later. HP ePrint mobile app even helps you with HP printer setup and lets you monitor the status of your print jobs.
If you do not activate, you can still print directly to your supported Wi-Fi-enabled HP printer, but only when your mobile device is connected to the same Wi-Fi network. You can print photos, images, PDFs, and text files saved on your mobile device.
Use the following steps to activate the mobile app.
On your Apple device, tap the HP ePrinticon, and then tap Activate.
Type your email address in the Activate using your emailbox, and then tapActivate. The HP ePrint service sends you an email containing an Activation Code.
Check your email, and then write down the Activation Code sent by the HP ePrint service.
On the Apple device, press the Home button ( ) twice, and then tap HP ePrint.
Type the Activation Code into the box, and then tap Activate.
The app displays a message to confirm activation.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01616126&lc=en&product=3793676&tmp...
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02759940&lc=en&product=3793676&tmp...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04395332&tmp_task=useCategory&cc=us&dlc=en&lc=e...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

HP Photosmart c7280 All-in-One Mac 10.7.1 (Lion) the "Two-Sided" option is grayed and cannot use?

I have a HP Photosmart c7280 All-in-One printer and a Macbook Air that runs the Lion operating system (10.7.1).
I am trying and needing to print via the "Two-sided" option that appears under the "Layout" pull down tab option, however, the "Two-Sided" option appears to be greyed out as if you are not allowed to use it. I am sure that that is not the case I just do not know how to unlock it yet I guess?
I just made sure that all of my software was up to date and it is currently.
Everything else is perfect about the printer and I have been using it for years, so thank you! I would just like to know what on earth I am doing wrong or need to do to unlock that "Two-sided" setting, so I do not waste a ton of paper! Thanks again!
Sincerely,
DAP413
This question was solved.
View Solution.

Hi DAP413,
In order to actiate the Two-Sided duplex accessory, you have to enable it from the printer settings:
-Enter System Preferences > Print & Scan
-Double click the Photosmart printer name to open the Print Queue.
-Click the Printer Setup button
-Click the Driver tab and make sure the Two-Sided Printing Accessory option is checked.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

NOT PRINTING FROM WINDOWS 7 TO MY PHOTOSMART c7180 ALL-IN-ONE (I CAN SEE MESSAGES IN QUEUE)?

CANNOT PRINTING FROM WINDOWS 7 TO MY PHOTOSMART c7180 ALL-IN-ONE (I CAN SEE MESSAGES IN QUEUE)?

Hi,
I think you need to remove the queue. Please try:
    hold down the Windows key and press R.
    from the Run window, type services.msc and hit enter.
    if the machine asks for Admin you have to accept this,
    look down to the print spooler service, right click it and select properties
    click on the Stop button,
    browse to C:\Windows\System32\Spool\printers
    delete the job inside this folder
    reboot the machine
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problem installing Photosmart C6180 All-In-One software

I've "googled" and found several similar installation issues but none quite match mine. When I attempt to install the All-In-One software, I receive a dialog box error "The system cannot find the file specified." The file that it is attempting to find is found in the Dialog window heading:
c:\users\Myusername\AppData\Local\Temp\7zS52C3\,sourcepath.setup\blocksys...
Using %temp% I am able to verify that the 7zS52C3 folder structure exists. However the ",sourcepath.setup" folder shown above is incorrect. it should be just "setup".
I've ran this install several times under different accounts, including creating a new admin account.
I've cleared all temp files, removed tsr files using msconfig as described and cannot seem to solve this issue. I even renamed the setup folder to ",sourcepath.setup" to see if this would solve the install but it failed on another file.
I am running Windows Professional x64, My HP Photosmart c6180 is connected to the network and I am able to print properly to it from my computer. I need the software primarily for "scanning to computer" functionality.
Any help is appreciated.

Hello @DirkPittP,
Welcome to the HP Support Forums!
I understand that when installing your HP Photosmart C6180 All-in-One Printer on your Windows 7 64 bit computer, you are encountering a 'c:\users\Myusername\AppData\Local\Temp\7zS52C3\,sourcepath.setup\blocksysinstall.exe The system cannot find the file specified' error. I would like to assist you with this issue today.
Now in your original post, I can see that you have already attempted installing the printer on administrator accounts, clearing the temp files, running an msconfig, and renaming the folder to no avail. At this time I would like you run the following steps to see if we can get this working for you.
Step 1: Uninstall Drivers:
First, I would like you to clean up your system of any software or drivers for your HP Photosmart that may have made their way onto your system during the failed installs. Rather than running the 'normal' uninstall process, I would like you to click here to download the Microsoft Uninstaller Tool.
Once the website opens, please select the Run now button on the right hand side. Please follow through any recommended fix steps provided. When prompted, choose that you need assistance with 'uninstalling'. You will be brought to a list of populated programs from your computer. Scroll through this list until you see your HP Photosmart. Select your HP Photosmart and allow it to uninstall.
This Microsoft Tool will also check your computer for any registry corruptions. Should any system corruptions be found, this Microsoft Tool will fix those corruptions for you.
Once the uninstall has completed, please close the Microsoft Tool and proceed to the next step.
Step 2: Clear the Temp Files:
Click on your Start menu
In the 'search programs and files' box type %temp% and hit enter
In the Temp folder select Ctrl + A at the same time on your keyboard to highlight everything
Select the 'delete' button on your keyboard. If you get a pop up to skip an item, just skip it.
Once the Temp folder is emptied, close the window
Right click on your Recycling Bin and select Empty Recycling Bin
Step 3: Download Drivers:
Please click here to download the latest drivers for your printer.
Once the website opens select the Download button on the top left
Allow the download to Run
Once the download has completed the installer will automatically extract
After the extraction if you get the error again for 'blocksysuserinstall.exe' take note of the temp folder 7z . . . number sequence it refers to this time around.
Step 4: Rename Temp 7z Installer package:
Click on your Start menu
In the 'search programs and files' box type %temp% and hit enter
In the Temp folder locate the 7z . . . folder that shows in there
Right click on the 7z folder and left click on 'rename'
Rename the folder to the 7z. . . to the name that the 'blocksysuserinstall.exe' points to
NOTE: Ensure that you are logged into the same User Account that the error points to: "c:\users\Myusername\AppData . . . " when you make the change to the 7z folder. There shouldn't be any 'sourcepath.setup' folders at all.
Step 5: Install Printer:
Once the 7z folder is renamed to the name the error wants than click on the 7z folder to open it
Scroll down to the bottom of the installer files
Double click on the setup.exe file at the bottom. It may show an HP logo to the left of it
An installer window should pop open
Follow through the with the onscreen instructions to reinstall your printer
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

How do i close all apps before shutting down-Ipad

How do I close down all apps before shutting down iPad?

Click the Home button once to display your Home Screens. Double click the Home button. That should display your open apps at the bottom of the screen. Press one of those icons until they wiggle and a red dot with an "x" appears appears on each icon. Press the red dot to close down each app. Press the Home button when all apps are closed. You may need to press the Home button again to get back to the normal Home Screen display.

Photosmart C7250 All-in-one

AFTER CLEANING THE PRINTHEADS, AND PRINTING A TEST-PAGE TO EVALUATE THE COLORS AND ALIGNMENTE, ALL COLORS ARE OK BUT THE VERY DARK BLACK BAND (THE TWO GRAY ONES ARE OK). ANY SUGGESTION OR RECOMMENDATION WILL BE MORE THAN WELCOMED.
jORGE

Hello @Joarlujo,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the black print quality issue that you're experiencing when printing from your Windows 7 computer to your HP Photosmart C7250 All-in-One Printer. Thank you for including the troubleshooting steps you have already attempted prior to reaching out for support. At this time it does sound like you have a defective black ink cartridge, or your HP Photosmart is experiencing a Printhead issue. The Printhead is the part that the cartridges fit into. It controls 'reading' the cartridges and putting ink on the page. If the Printhead is defective than you may experience cartridge detection, or print quality issues. The Printhead is a non-replaceable part within this specific model. Therefore, should the Printhead be defective a whole unit replacement would be needed. In saying that, there are troubleshooting steps that we can attempt to resolve this quality issue. Can I please have you follow the steps below.
Solution one: Use genuine HP cartridges:
HP recommends that you use genuine HP ink cartridges. HP cannot guarantee the quality or reliability of non-HP ink cartridges or refilled HP ink cartridges. If you do not use genuine HP ink cartridges, the steps provided might not resolve print quality issues.
Solution two: Check the ink levels, and then replace the depleted cartridge:
1. On the printer control panel, press the Setup button.
2. Press the Down Arrow button until Tools is selected.
3. Press OK.
4. When the Display Ink Gauge option displays, press OK. The ink gauge displays.
5. Please replace any low or depleted cartridges.
Solution three: Print a self-test report:
Load plain white paper into the input tray.
Press Setup.
Press the Down Arrow () to highlight Print Report.
Press OK.
Press the Down Arrow () to highlight Self-Test Report.
Press OK.
If the test page printed clearly, check the settings and media you are using, and then try to print again.
If the report or printout shows streaks, lines, or missing colors, continue to the next solution.
Solution four: Clean the printhead:
Load plain white paper in the input tray.
Press Setup, press the Down Arrow (), press Tools, and then press OK.
Press the Down Arrow () to select Clean Printhead, and then press OK. A test page prints.
If these steps resolved the issue, you do not need to continue troubleshooting.
If the issue persists, continue to the next solution.
Solution five: Align the printer:
Load plain white paper in the input tray.
Press Setup, press the Down Arrow (), press Tools, and then press OK.
Press the Down Arrow () to select Align Printer, and then press OK. A test page prints.
If these steps resolved the issue, you do not need to continue troubleshooting.
If the issue persists, continue to the next solution.
Solution six: Calibrate the color:
On the Windows taskbar, click the Start icon (), click All Programs, click HP, click the folder for your HP Photosmart, and then click the icon for your HP printer (). The HP software window opens.
Click Settings, click Print Settings, and then click Printer Toolbox.
On the Device Services tab, click Calibrate Color, and then follow the on-screen instructions. The procedure takes about two minutes and requires two sheets of paper.
Try to print again.
- Source
Please respond to this post with the result of your troubleshooting. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

I am unable to stop auto delivery of apps. on HP Photosmart 5520 all in one printer

I am unable to stop auto delivery of apps. on HP Photosmart 5520 all in one printer
This question was solved.
View Solution.

To add on to what sabertooth04 stated, here is a link to a document that addresses print apps for your model of printer. Click on the drop down titled "Managing Scheduled Delivery Print Apps" and the option to cancel or remove an app will be available for you to click on and review the steps to remove that app . I hope that this helps.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Photosmart c8180 all-in-one shuts down-resta​rts repeatedly

Similar Messages

Maybe you are looking for

Photosmart c8180 all-in-one shuts down-restarts repeatedly