Photosmart C8180 Touch display will not sleep when networked using Devolo Homeplug

The printer operates perfectly when networked via Devolo Homeplug system except that the touch screen will not enter sleep mode after 30 minutes of inactivity.
However, if the Devolo system is unplugged then the touch screen will enter sleep mode correctly.
Can anyone help.

I'm seeing similar behavior when I disconnect my TBD. My Retina MBP doesn't go to sleep. I get to work an hour later and it is very hot to the touch.
I'm not seeing lots of people complaining, so I wonder if it's something weird I do. Do you have VMWare Fusion or XQuartz running when you try and sleep?

Similar Messages

  • MacBook Pro will not sleep when charging and display is closed.

    Hi,
    My Mac will not sleep when it is charging. When I close my display, it will not sleep.
    When I unplug the power cable, it sleeps...
    I've tried to reset the SMC, and I think i did, the charger went from green to red etc different colours..
    Does anybody know what this might be?
    thanks

    AIGHT GUYS!
    This is how to fix it, and i guarantee u its 90% the cause.!
    first of all, if you are a lion user (most likely all of you with this problem) go to system preferences, and then to sharing. turn all sharing OFF. especially printers....
    open a terminal, and type in :
    pmset -g assertions
    This will show u if somehting is preventing ur mac from sleeping. on the left colomn, it should say "PreventSystemSleep" and on the right colomn a number. mine was one, which is probably the same for you guys.
    Go to system preferences > Print & Scan > Open Print Queue. Make sure all the printing queues are empty and nothing is in there. You do not need to pause any or anything like that just make sure nothing is in the queue.
    Close your macbook lid and look at ur light it should be sleeping. HOPE THIS WORKS FOR U
    took me long enough to find out.
    dont hesitate to ask me any questions

  • I have a MacBook Pro 15" 2.53GHz Mid2009.. updated to Lion which is now 10.7.3 build 11D50b... when I close lid and connect to Cinema Display, display will not activate... disconnect display, open lid laptop display will not activate... used to work fine.

    I have a MacBook Pro 15" 2.53GHz Mid2009.. updated to Lion which is now 10.7.3 build 11D50b... when I close lid and connect to Cinema Display, display will not activate when keyboard/mouse used... disconnect display, open lid and laptop display will not activate... only way out is hold power button.  Worked fine before Lion update.   Any Advice?

    Thanks very much Coander15... I've printed the doc you pointed me towards and I'll run through it.. hoping it helps!
    Before I installed Lion I simply hit any key on the keyboard or clicked the mouse...
    The keyboard is USB (usually connected to monitor which is connected to laptop... have tried direct connect to laptop as well with no luck) and mouse is USB wireless to one of those tiny plug in's... have tried direct connect USb mouse as well with no luck.
    I could plug the closed/sleeping laptop into the monitor and unplug from the monitor without incident all day/night... always worked fine. 
    Had heard something about this happening w/ Lion but went ahead anyway. 
    Oh well...
    Hoping your pointer helps... will let you know how it turns out.  Thanks very much for responding!!!

  • Macbook Pro 13" will not sleep when I shut the lid

    Hello Community,
    This is my first time using the forum. I have a macbook pro 13" 2009 model. Recently I had my MBP connected to an external monitor. I shut the lid while it was connected to the monitor and forgot to turn off my bluetooth mouse. Later that night the mouse was bumped, waking my macbook and setting it to clamshell mode. I put it to sleep again, opened the lid and woke it, but the LCD on the laptop did not turn on. I reset the PRAM and the NVRAM with no luck. I disconnected the monitor, rested the P/NVRAM and it would boot with the laptop screen and once everything was loaded my screen went black and then went to sleep on its own. I tried powering on and off using the P/NVRAM key commands...and nothing. So I opened the bottom case and physically disconnect the battery, reconnected the battery, put the bottom plate back on and powered it up. The screen began working again, now I have a new problem, the MBP WILL NOT sleep when I shut the lid anymore. I even reinstalled the OS and still no luck? If anyone has anything helpful that I could try to get this feature working again it would be much appreciated. If there is some terminal command I could try or some other troubleshooting method. I even put a magnet by the right side of the keyboard to try to trigger the sleep switch.
    Any advice would be appreciated.

    I resolved my issue in a very unlikely way. In my earlier post I mentioned that I wiped my hard drive and was starting from scratch. Well I reinstalled windows 7 through bootcamp and it fixed my sleep issue. That's right folks...Windows fixed my mac. I think that it was an EFI issue. I think this because windows 7 uses EFI and during installation it must have reset the sleep values to normal. I feel when you reinstall Mac OSX the EFI partition on the drive should get wiped and reinstalled as well. I also feel that apple should have an option within System Prefs for the user to select what the way is that the computer responds when the lid is shut instead of the ritual of trickery and problems that the clamshell mode can cause.
    Hope this helps someone.

  • My imac display will not sleep

    I set it to one minute and wait and the display will not sleep

    I set it to one minute and wait and the display will not sleep

  • TS3474 The ipod display will not orient when turn...picture will move when turned.  Thank you.

    I've reset the ipod nano..downloaded the software again and still the display will not turn when the ipod is turned.  I don't know what else to do.  Does this ipod need to be sent back to Apple?  It's 6 months old.  Any other suggestions?  It's a 6th generation nano bought as a bundle with a armband and changer for Christmas 2011from Best Buy.

    So you placed two fingers such as your thumb and index finger in a pinchlike fashion on the Nano's display and turned them clockwise and counterclockwise and nothing happened?
    If so, you have a hardware issue, meaning you'll want to have the iPod serviced or replaced.
    B-rock

  • IBook will not sleep when lid closed

    Hi,
    I recently had my Hard Drive replaced, the old one died. It was all covered by AppleCare and the repairs done at a Apple Authorised Outlet. After installing everything again I just found out that my iBook will not sleep when the lid is closed. The screen is still on and bright. Any ideas why? Is this dangerous? Any quick fixes?
    Cheers,
    Jack

    Jack,
    Welcome to Apple Discussions.
    You need to give the Apple Authorized Repair center a call back and let them know what's going on. I've seen this before here on the forums, and it was attributed to a sleep magnet not being put back in. It's most likely this. Apparently, putting this magnet back in can be easily overlooked.
    Brian

  • My iMac will not sleep when not in use.

    The screen will go dark, but the disk will not sleep when not being used.  I have restored defaults and set energy settings to do so and still no luck.  Any thoughts?  Was this part of a current update?  It just started to not sleep a few weeks ago.

    Thanks for your help regarding my computers sleep disorder.  I wanted you to know that after many hours of searching, I found that I had downloaded a program called Growl with my Belkin router when I installed it.  I removed this Growl program and finally my computer will sleep on it's own.  I wanted to give you this info just in case you come across this problem again.
    Thanks again!

  • I phone will not "sleep" after non use of 1 hour. How do I fix this?

    i phone will not "sleep" after non use of 1 hour. How do I fix this?

    You obviously have a faulty SIM card. Go to an Apple store or a phone store and get a replacement SIM card.

  • I have a folder with 10 folders inside it, 8 of the folders will not function when I use "show view options".

    I have a Folder with 10 Folders inside it, 8 of the Folders will not function when I use "show view options", they always default back the default.  The "show view options" works on all my other Folders in my system, even on the first two of the Folder in question.  How can I correct it?  I have tried every thing I can think of, even deleting the Folders & reintalling them.  For some strange reason the "show view options" only does not work on the last 8 Folders in the Folder in question.

    Instead GarageBand recognize my keyboard and i can play normally, also, if it can help, those are the Audio and Midi Logic Preferences and the Controller Surfaces Setup with the keyboard connected :

  • Display will not sleep any more after waking from sleep

    My Macbook has recently started misbehaving after waking from sleep. Started putting the entire MB to sleep each night by closing the lid. When I wake it in the morning everything seems normal, no error messages. However from that point forward the display will not dim or sleep. I've tried re-applying my settings in System Preferences -> Energy Saver. Pretty much the only fix has been to reboot, which is annoying and Windows-like.
    In the interest of full disclosure, I have "fast sleep" enabled (aka hibernation mode disabled) but I've had that since I bought my MB with 10.5.1 on it. So I don't think it's related. In fact I changed to the default Energy Saver profile to see if that fixed the problem (it didn't), which re-enabled hibernation mode and I then had to re-disable hibernation.
    I want to say this started happening after the 10.5.4 update, but that may have been a coincidence as to when I started sleeping it each night... I don't exactly remember.
    I downloaded Cocktail to run all the cron jobs, etc, that don't get run when sleeping at night, and that didn't help either.
    Any suggestions? Anyone else ever see this? Seeing it now?
    Thanks!

    This is still an issue for me.
    I sleep my Macbook every night by closing the lid. After doing this a few times, the display either stops sleeping, or stops locking. I have the lock menu in the Apple menu bar, and even selecting "Lock screen" will not work.
    Sometimes a reboot fixes it, sometimes I have to reset the SMC.
    Any info out there?

  • PB will not  sleep when inactive

    The display will sleep, but not the whole book.
    Furthermore the hard disk will not sleep (of course I checked the option).
    BTW, the hard disk is always running, even with all applications terminated.
    I have no problem sending it to sleep manually, nor on wake-up.

    I am having the same problem with my 15" PB, and though it used to sleep, since about December it no longer sleeps on its own, unless I close the cover. The same things happens with the hard drive -- it spins down, and then it starts back up a couple of minutes later, despite the fact that I'm not using the computer.
    Any ideas?
    The display will sleep, but not the whole book.
    Furthermore the hard disk will not sleep (of course I
    checked the option).
    BTW, the hard disk is always running, even with all
    applications terminated.
    I have no problem sending it to sleep manually, nor
    on wake-up.

  • My display will not wake when I remote in

    I have an imac early 2009. I have recently updated various software from Apple. I have the engery prefrence at : 1hour Computer sleep and 15 mins Display sleep. I use Gotomypc to login to my home computer. Prior to the new updates i did not have an issue with with the computer not waking from sleep. But since the updates my display will not wake? They hardrive wake but the screen just does not. I do have a screen saver, however, this was not an issue prior to the new updates. Any help would greatly appreciated.
    Thank you in advance,

    After a lot of research it seems to be an issue with the last update. It appears to be an issue with several application and the developers are aware of the issue. Unfortunately the only fix to the issue currently is to keep your monitor on. I have adjusted my screen to only be on at various time to prevent burn out. I hope this helps.

  • My iPad will not sleep when the cover is closed.  Thus, the battery runs down quickly.

    My iPad will njot sleep when the cover is closed.  Thus, the battery runs down quickly. 

    Check that Settings > General > Lock / Unlock  is turned ON

  • Screen replaced on 17in--now PB will not sleep when lid is closed

    I recently replaced my screen to a glossier LG Philips lp171w02 screen. My problems are that my pb will not go to sleep when I close the lid and the brightness keys also are not functioning. Any help would be greatly appreciated.
    Joel

    Is there a way to non-destructively remove this magnet from my 17" PowerBook (older one with 1440x900 display)? I don't like that my PowerBook sleeps when I close it, and I've asked Apple if there is a way to disable this functionality. Short of plugging in an external display, they told me no.
    This option is built in to the Windows OS, and I've grown quite accustomed to putting my laptops to sleep manually. I'd really like to be able to have the lid closed and still let programs run, downloads continue, etc.

Maybe you are looking for

  • How can I mark large sections of a topic to be skipped during RH spell check?

    I have a RoboHelp Webhelp project in which many of the topics have sample code and other entire lines of package, class, and other names that I want the spell checker to bypass. Unfortunately, there is no option to select the text and mark it to be i

  • HT1665 Why does my ihome no longer work properly since my iPod update

    My ihome no longer works properly since I updated my iPod to the most current software update. Is there a fix?

  • DVD drive sharing issue

    Hi, how can I create my music library in iTune (to sync with my iPod) on my Macbook Air since remote DVD sharing from my other Macs does not let me do it? Apple selling point for not having a DVD drive on the Macbook Air is that you can use DVD drive

  • 3GS App Icons

    My 3GS has been running fine upto now. No problem opening apps but only today a few of my app icons have gone dull and display the wrong text ie: one of my games is displaying eBay icon but has correct name for the game! Why would it do this and is t

  • Water Damaged 2009 2.53 MBP- Can working HD be installed in an Indentical or Same gen MBP?

    So my june 2009 2.53 macbook pro suffered a water spill and has not turned on in over a week. I accepted my loss but read that i could actually take out the hardrive and recover some lost data. HD works, as it's now an external in an enclosure. I hav