Photosmart D110 and Wifi Printing Help Please!

I have been told my several different tech support ppl at various stores that I can use my Verizon Mobile Broadband card's WIFI output to print to a wireless printer.  Can someone please provide DETAILED instructions on how to do this?  I have installed the software  but when i try to connect wirelessly it says no network found.  Which is true because i of course do NOT have a network.  I only have my broadband card and WIFI output....??   It's all new to me so i'm not sure what to do.  Thanks in advance!

OK, I think I understand.  Normally, one wireless radio can connect to one device at a time.  You have two.  One is a VPN connection to the Verizon cellular network with a special radio meant for that.  The other is a standard wifi radio that is connected to your printer.
You can always come back here for help!
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • I reset and erased my iphone 4 and now I can`t reinstall it! After I choose a language, region. and wifi, it says Please, try again later or contact customer care

    I reset and erased my iphone 4 and now I can`t reinstall it! After I choose a language, region. and wifi, it says Please, try again later or contact customer care. I tried to do with iTunes, and iTunes even sees this iphone, but it`s like blank, there is nothing I can do in iTunes. It uploaded last software for this iPhone 4, but when it tries to do the reserve copy of iphone first, it shows a mistake. And ask to disconnect and connect the device again, which, obviously, doesn`t help.

    This usually happens if the phone has been Hacked / Jailbroken / Modified...
    Is this the case...?
    If so...
    Then... Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.
    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743

  • All of my playlists made on my Ipod touch 3rd gen keep disappearing when I sync it to itunes. Drivng me crazy. All software up to date on both itunes and Ipod. Help please.

    All of my playlists made on my Ipod touch 3rd gen keep disappearing when I sync it to itunes. Drivng me crazy. All software up to date on both itunes and Ipod. Help please.
    I tend to make my playlists right on my ipod. This did not happen for the last 2 years. Just started recently. Did get a new computer recently.

    That is because you got a new computer. You can only sync all media from one syncing computer. You can sync from any computer to iPod using the manual method but that does not sync from iPod to computer.
    To make this your syncing computer:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • £37 has disappeared from my iTunes account. But no apps or music or tv/movies have been bought. Has it been hacked and can you help please?

    £37 has disappeared from my iTunes account. But no apps or music or tv/movies have been bought. Has it been hacked and can you help please?

    Report it to Apple:
    How to report an issue with your iTunes Store purchase - http://support.apple.com/kb/HT1933 - working through iTunes application and iTunes Store interface.
    iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html
    Change the password on your account.

  • HT1923 Hi, I have a iPod touch 4th generation and I does not show in iTunes. It comes up as charging when it is plugged into the computer but just not in iTunes. I have everything up to date and have restarted both computer and iPod. Help please?

    Hi, I have a iPod touch 4th generation. It comes up as charging when it is plugged into the computer but it does not show in iTunes. I have everything up to date and have restarted both computer and iPod. Help please?

    Try here  >   - http://support.apple.com/kb/TS1369.

  • My volume control is disabled after plugging in and unplugging headphones, Help Please...

    Dear all, this is my issue, I have since the beginning (October 2014) with my iPhone 5S, 64GB: My volume control is disabled after plugging in and unplugging headphones, Help Please...

    This should not happen if you have the output volume in System Prefs/Sound set low. Have you tried setting the ITunes player volume at top left a bit lower?

  • HT1695 My iPad will not except my Kodak ESP 1.2 printer via wifi any help please

    My iPad will not except my Kodak ESP 1.2 printer via wifi any help please

    Is that model a wifi printer? As far  as I know, there are no kodak printers that are air print enabled. So you have to use a third party helper of some kind.
    Look on Kodak's site. They have options for various models. There might be an app that will help, I believe some models also work with google documents.
    If none of those work then you can look to third party apps. I have Print n Share and it works with my iPad, but there's also Printopia and Print Central and I'm sure there are others.

  • Problem - HP Photosmart D110 and Mac OS X 10.9.4

    Hi guys,
    I have problem when try to scan images trough photosmart D110 on OS X 10.9.4
    The preview is ok, but when I try to save, file is saved corrupted.
    I try all available formats but same problem.
    Please any help will be appreciated...

    Hello @TI-Sonhart , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are running into scan issues.  I would like to help.
    Does this issue occur when making a copy at all?
    I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
    Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
    I would also suggest running your Apple updates:  OS X: Updating OS X and Mac App Store apps
    After the updates, I would recommend reinstalling the  OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Wifi printer help

    i have an hp envy 5530 wifi printer....  it shows that it is connected to wifi...  when i try to print my computer says that the printer is "offline" I have tried many things..  such as..
    resetting the printer wifi status, and powering off and on
    powering the laptop off and on
    recycling the router and modem
    Does anyone know how to fix this?

    Hi,
    Please use the following instructions (for Windows 8) to fix:
        http://support.hp.com/us-en/document/c02241610
    Regards.
    ps My loan Envy 5530 was offline after few weeks rest. I actually had to re-install software and drivers on Sunday (midday of Tuesday in my country now).
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Browser cuts off half of table and contents? Help please.

    Hi,
    When viewing the page using some versions of IE7, the area
    where the Virtual tour viewer is and anything within the same table
    is cut in half ! I never even noticed it as I test on a laptop and
    desktop, both running IE7 and Firefox and there were no problems.
    Got 3 emails of totally different people asking where the other
    half of the page is, plus a friends browser does it also.
    The link is
    http://www.cicadastudio.ca/newyork.html
    The virtual tour viewer in the iframe, thumbnails and links
    are in the first big table. This gets cut in half approx after the
    text for each thumbnail so anything to the right is just white. No
    flash/quicktime logos and only half the viewer shows. It still
    works though loading the default panorama!
    The big table below holding regular still images with the
    black background displays correctly. Very strange.
    Does any one else only see half the table or know what may be
    causing it to happen? The most obvious thing would be the iframe
    but this has happed with some of the other pages also and they have
    no iframes on them.
    Thanks
    Andrew

     I see and It only prints half the photo? Interesting...
    What i would suggest doing is this,
    - go to the page/photo on face book where you are trying to print/save from
    - right click on the Photo and ""Save As"", now i would recommend saving them in the " My Pictures" from within the "My Documents" folder
    -Once saved, go ahead and open them up (Pictures)  from within the Folder and not the website, unfortunately, it sounds like the web site is not allowing the full command/picture to be sent through, but being a 3rd party Site We cannot be sure..
    -that is what i would advised to get those to Print Fully and to your Expectations
    __ if this Solution has helped Please Mark as resolved and A Kudos Would be Appriciated__
    even though i am a Employee of HP my Views and Opinions are my own...
    I am an HP employee.
    __ if this Solution has helped Please Mark as Resolved and feel free to Provide a Kudos__

  • I keep losing my connection from iMac to keyboard and mouse any help please

    I keep losing connection between imac and my mouse and key board.I then have to power off and reboot to get connection can anyone help please!!!!

    Hi
    Update date for anyone who ha suffered with the problem of losing connection to an ext HDD.
    For me, the solution appears to have been achieved by making use of my old 802.11 b&g Airport Extreme base station and my new 802.11 n Airport Extreme Base Station.
    My network is now setup as follows:-
    Airport 802.11 n - 5GHz
    Macbook Black
    Apple TV
    Time Capsule
    Airport Express Base Station
    Airport 802.11 b&g - 2.4GHz
    Playstation 3
    Xbox 360 Elite
    Nintendo Wii
    iPhones
    iPod Touch
    Canon Wi-fi Printer
    iMac G5
    Sony VAIO TX2P
    I connect my ADSL line to both AEBS by ethernet, changed the settings and this has dramatically improved my connection reliability and speed when streaming movies and/or music.
    Through trial & error, I have also discovered that the other problems that I have are connected to situations when restart my Macbook after a shut down or restart and my iPhone is connected. This causes iTunes to start up but due to the restart, the ext HDD is not ready and therefore, ITunes opens its local library - I now just try to remember to use the Option key to choose the library. Finally, if the laptop just runs out of juice, the ext HDD doesn't have the chance to have a friendly handshake before losing its connection. When I restart, the connection does to the HDD fails and I have to restart AEBS
    I hope that helps anyone with similar problems or who wants to make the most of their fast 802.11n equipment by making is use of that kit that was maybe considered redundant - by creating a dual frequency network that maximizes speeds on 802.11 n whilst allowing use of the legacy 802.11 b&g devices.

  • Printer help please

    Hi all
    I have two macs on a airport network and a printer connected to an Airport Express base station. Both macs can see the printer but the older iMac won't print to it. It says it has, but nothing comes out of the printer! Any ideas.
    Sorry if this is a stupid question its the only problem I've ever had with a Mac that wasn't resolved using the Help function.
    Many thanks in advance.
    Macbook   Mac OS X (10.4.9)   iMac G3
    Macbook   Mac OS X (10.4.9)   iMac G3

    Hi
    Thanks to all of you that responded.
    Its started working now with no explanation and seemingly no changes!
    Mark

  • No vídeo in my TV with original cable component and Ipad air, help please.

    How can I see my Ipad air and moviles in my TV with the original component cable, at the moment no works.
    Help please.

    Hey adbridge683,
    This is usually in reference to USB issues. This article has great step by step troubleshooting, so you can see the steps first hand yourself to try. http://support.apple.com/kb/ts3694#error50
    There's really only about 7 things to look for in there, and I hope that one of them helps you out!
    Let me know.
    -Regards

  • Adding and removing listeners help please...

    hi guys i have a pop up box that adds a listener depedent on a variable.
    like such
         if(upload_typ != 'O' && upload_typ != 'E')
        {RPanel.DSUB.addEventListener(MouseEvent.CLICK, DatabaseSend)};
       if(upload_typ == 'O')
        {RPanel.DSUB.addEventListener(MouseEvent.CLICK, DataSendOntme)};
        if (upload_typ == 'E')
        {RPanel.DSUB.addEventListener(MouseEvent.CLICK, EncumSendVal)}
    how do i remove the listeners? i continue to see examples of removing listeners but yet i dont see what the remove listener functions should do.
      any help would be greatly appreciated.
    Miguel

    In your case, because you can't be sure what listener was added, you can remove them all, and if they have not been added, no harm:
    RPanel.DSUB.removeEventListener(MouseEvent.CLICK, DatabaseSend);
    RPanel.DSUB.removeEventListener(MouseEvent.CLICK, DataSendOntme);
    RPanel.DSUB.removeEventListener(MouseEvent.CLICK, EncumSendVal);
    Alternatively, you could register the ones that actually get added to an object (associative array) and remove only those when necessary.
    If this post answers your question or helps, please mark it as such. Thanks!
    http://www.chikaradev.com
    Adobe Flex Development and Support Services

  • Canon MP600 and Bluetoothe printing Help!!

    I purchased my canon MP600 printer from the apple store here in Palo Alto and I ordered the BU-20 bluetooth adapter made by Canon.
    I can print to the printer using the adapter but it is VERY slow. I ave installed latest drivers from Canon's sight and have followed all trouble shooting steps.
    My printer is only 4 feet away from my Mac Pro with nothing in beetween it and the printer.

    I went the cheap route and purchased the iogear GBU-221 bluetooth adapter for $29.99 and it works like a charm anywhere in my townhome. Through walls, upstairs/donwstairs, and it prints quickly (10sec). Not sure why you'd have problems unless there's interference coming from neighbors or any other external factor. I'd return canon's adapter and try another one?

Maybe you are looking for

  • Error uploading textbook to Apple store

    I have a problem uploading my textbook I created with the iBook creator... whenever I use iTunes producer I get given this error message ERROR ITMS-4064: "Unsupported extension 'PNG' for artwork asset type." at Book (MZItmspBookPackage) I tried conve

  • F-02 issue

    Respected Gurus, i have one issue while i am posting a document,i.e it gives the following error,"balancing field in line item 001 is not filled",DIAGNOSIS IS the field segment marked as balancing is not filled with any value in line item 001 even af

  • I want other fields of table bkpf in T-code FB03

    hi expert. i want other fields of table bkpf in T-code FB03 so i tried to find setting in spro(img) , but i couldn't find that. where is the that?  help me please..

  • How to cancel the cancel invocie when do the wrong MIRO

    We did wrong MIRO (Input wrong qty) and then did the migo with 101. after that we did right MIRO once again and did the migo with 102. at last we did MR8M for the first wrong MIRO. However the cancel invoice post the difference to the adj account. th

  • Consuming SAP HANA from ABAP

    Dear all! I am trying to get data FROM HANA into ABAP AS (so an opposite unusual direction ). What is the best way of connecting them? Can't find any description. In Simple words: I have an ABAP program. Now i need connect to  Hana (RFC, whatever), t