PhotoSmart dont work with Windows 7 ??

I have the following:
HP PSC 1610 All-In-One Printer & a Photosmart M525 Camera and the software that came with it.
On the older dell this worked great and but with the new Dell with windows 7 it dont download.
So I cant use the Photosmart system for pictures and etc. Is there some way to get these to
work on Windows 7 ?? The printer still works and I can also download the pictures to another
site, but not the system that came with the HP equip, as I like the Photosmart system.
Any ideas please let me know.

HP does not have driver or software downloads available for this product in that operating system. Sorry!
I am an HP employee.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

Is there anything I can do to make my (old faithful) Photosmart 2610 work with Windows 8.1?

I recently upgraded to Windows 8.1 I do not have an installation disc for my (old faithful) Photosmart 2610 All-In-On 64 bit and I am wondering if anyone can tell me a way to 'get' my computer and printer to work together again.
This question was solved.
View Solution.

Dear verve1,
Here you have the full software to install you multifunction in Windows 8.1:
http://ftp.hp.com/pub/softlib/software12/COL30951/mp-110188-2/AIO_CDB_Net_Full_Win_WW_140_408-4.exe
I hope you find it helpful.
Greetings.
* I am not an employee of HP, my work is voluntary.
If this answer was helpful and clarify or resolve your problem, please mark the issue as resolved and click my star next to give a kudo as thanks.
I am not an employee of HP, my work is voluntary. If this answer has been helpful and clarifies or solves your problem, please click the button
and click on the icon if you want acknowledge the assistance.

HELP....need a good sound card that works with Windows 7 64 bit

I've searched the internet and I'm seeing that folks are struggling with getting sound cards to work with Windows 7 (particularly the 64 bit systems). I know there are stability issues with the 64 bit system but I'm looking to install a decent sound card to improve stereo sound from my HP Pavilion (h8-1260t). The onboard sound is OK, but I'm looking for higher fidelity and the shortcomings of the stock sound chip is noticeable when played through my hi fi system. Don't really need 'surround sound' (I'm not a gamer) but I'm assuming any card that comes with this feature will also produce a quality stereo signal. I also like to archive music from steaming sources and have found a significant loss of sound quality once the track is saved. I'm assuming a good sound card will help with this. Any advice would be greatly appreciated.

Spauld, welcome to the forum.
I suggest finding a sound card that you like and contacting the manufacturer's Customer Service to assure its compatibility with Win7 64-bit. They are the experts on their products. While I am not a fan of dedicated sound cards because their drivers are conflict prone, I would buy a Creative Soundblaster. They have been proven over time.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Is photosmart c5280 compatible with windows 7 64 bit?

Is HP PhotoSmart C5280 compatible with Windows 7 64 bit?

While the printer will work the Scanner does not work!
I purchased a new Asus desktop pc that runs Windows 7 Home Premium. (Previously I have been using the HP C5280 on a pc with Windows XP and had no problems.)
I have installed, uninstalled, and reinstalled all possible combinations of the following software, but still cannot scan.
-        PS_AIO_02_NonNet_Full_Win_WW_130_140
-        CPE_SCAN_DESTINATION_UPDATE_hypcom_001_003
-        dot4patch_reboot
I have run HPSDU diagnostics after each successful step of the installation and I get a “The scan driver is missing or corrupt” message.
Does anyone have any ideas? Please help!
Thanks

Update for 3com etherlink xl 10/100 pci t NIC (3c905c-tx) working with windows 7

I need to download update for 3com etherlink xl 10/100 pci for complete pc management NIC (3c905c-tx) working with windows 7

For Win7 64bit you have to install manually a compatible driver within in the driver collection of Win7: Choose network-adapter >>> realtek semiconductor (the 2nd) >>>
HP EN 1207D-Tx PCI 10/100
This driver is working well.
Thanks for that! Sorted my problem with testing TMG on an old machine!
well it works the device dont do shit it does in xp i write manually ip no signal unidentified network
evrytime i install that driver i get message Realtek RTL8139/810x Family Fast Ethernet NIC windows has finished installing the driver software for this device WTF IS THIS FUCKING CRAP I CHOOSE TO INSTALL SOMEETHING DIFFRENT
HP EN 1207D-Tx PCI 10/100
i am using the server 2011

Is HP Photosmart 7510 compatible with Windows 8?

I have HP Photosmart 7510. I am trying to find drivers for Windows 8 64 bit. Windows 7 64 bit drivers (downloaded from the HP support) refuse to install complaining that this is unsupported version of OS. Where can I get the drivers?

Hi, Please refer the link below to know more. http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/How-to-Get-Your-Inkjet-Printer-Working-with-Windows-8-Consumer/m-p/1334287

Formatting Mac HDD to work with windows files/applications

I was thinking of partitioning the hardrive and formatting one partition whatever way I would need to in order to use it like a Windows computer, because I really have no use for my Mac, if I cant get it to run many applications that are windows exclusive. However I would need to send for the Tiger startup disk, and I dont want to pay for it unless I'm sure that this is even possible, and I want to know what I am doing
Anyway I dont really know that much about macs, so exactly what do I need, and what do I need to do, for it to work with windows/PC files and applications?
And My Harddrive has a total of 9.5 GB, and only four GB of free space (I dont even have anything on the computer, so I don't know what is taking so much space) is that enough space to do whatever it is i'm talking about?

virtual PC is pretty slow, I wouldn't really recommend it at this point on an old iMac. maybe for really light duty things. Frankly, you're probably better off just selling, donating or getting rid of it and getting a cheap PC. a cheap PC is a cheap PC, and in my opinion very inferior to the mac, but it will run windows much faster.
Or just use it as a mac. A mac can do just about anything a windows box can, and is usually more reliable. Files can be read without problems in most cases. Give it a shot.

Does the Ipod Nano work with Windows XP SP1???

I studied the system requirements for the ipod nano and there was written, that I need a WinXP with SP2 for it.
Because I use Sound-Software that only works with Windows XP SP1 I have to keep this system, and I now would like to know if that works. Could anyone answer this question??

Have you try putting your ipod into disk mode if you need help putting it in disk mode here's a page from apple
of how to put your ipod nano into disk mode: http://support.apple.com/kb/ht1363

Driver to have HP Laserjet C4120A (HP Laserjet 4000n) work with Windows 7

We just put in 28 new Dell OptiPlex 3030 AIO with Windows 7 Professional in a school computer lab - but the tech guy did not install a printer for it to print to because he says our current printer - an HP Laserjet 4000n (C4120A) - is too old and will not work with Windows 7. This is an EXCELLENT printer and has been working for us for a long time and I hate to give it up.
Would someone please direct me to where a driver for this printer that will work with Windows 7 - or will Windows 7 automatically determine what driver is needed and retrieve it from its set of drivers it has with the operating system?
Thank you so much for helping!

Hello,
I've seen this same issue with my printers (other HP printers) whereby the default setting to support the Duplexing hardware was set to 'off'.
A quick method to check this is look at what the setting is for Duplex hardware in the Device Settings tab, and if it's not set, correct it.
Printer Properties:
From the 'Start' orb -> [Devices & Printers] -> right click on your Printer icon -> select 'Printer Properties' -> click on 'Device Settings' tab.
You should see a dialog similar to the mine (attached): look for the 'Duplex unit (for 2-sided printing)' and see if it's set to "Not Installed":
--> in either case, click on 'Not installed' and from the dropdown box, select 'Installed'... Click 'OK' to accept the changes and close the dialog.
Printing Preferences:
again, right click on your Printer icon -> select 'Printing Preferences' -> click on 'Advanced' tab.
-->Check to see if there is a 'Duplex Hardware' or '2-sided printing' option in here: mine doesn't show one but thougth I'd mention it nonetheless.
Click on the 'Finishing' tab and select 'Print on both sides'...or simply test print a multi-page document and set those preferences on-the-fly.
Let me know if this helps...
HardCopyTed
Regards,
HardCopy (I am employed by HP) [If this was helpful, please mark this 'Solved' or 'Accept as Solution' so others can find this too]
How to Give Kudos | How to mark as Solved
Attachments:
PCL6-DeviceSettingsScreenCap.JPG ‏81 KB

ITunes 12.1.1 does NOT work with Windows - Fix??

Hi everyone,
I had issue after issue with the latest iTunes update (12.1.1) not working on my windows 7. It simply would not lunch when clicking on the shortcut to open.
After a fair bit of searching I found this alternative version which seemed to do the trick and now it works:
iTunes 12.1.1.4 for Windows (64-bit - for older video cards) - iTunes64Setup.exe(2015-02-18)

The "for older video cards" installer - which, like most prior "64 bit" versions of iTunes, is actually a 32 bit application with a 64 bit installer - may be a useful fallback if the full 64 bit version does not install or run correctly. Although 12.1.1.4 is a major improvement over 12.1.0.71, there are clearly still some lurking incompatibilities with some 64 bit Windows systems/components. It is, however, a little misleading to say that "iTunes 12.1.1 does NOT work with Windows" - in many cases it works fine without switching to the alternative version. I have the full 64-bit version of 12.1.1.4 running on three systems - two Windows 7 and one Windows 8.1 - no issues with either installation or operation on any of them.

Secondary display does not work with Windows...

Ive been using a samsung syncmaster 920nw as my secondary display for the past few months. It works fine while running OS but when I switch over to Windows XP the display goes blank after startup. I have installed the proper drive and updated it whenever possible, but with no effect. I have tried to follow the troubleshooting prompts and pretty much everything else I could think of. Im out of ideas. I didnt buy the monitor to sit on my desk and take up space... Any help would be greatly appreciated.

Still no luck... Has anyone else experienced this problem while running Windows through bootcamp? Is it possible there's a compatibility issue with XP vs. Vista? The display is new and bears the mark "Works with Windows Vista". Could that mean it wont work with XP? I obviously don't use Windows that often, but seeing as I purchased the monitor as a secondary display, it would be nice to be able to put it to use in Windows too. Thanks anybody...

How can I get my Canon A620 to work with Windows 7

Just signed up here, ot the brightest with tech stuff. I'm trying to get my Powershot A620 to work with Windows 7. I'm guessing there's drivers I need to down load ? Will they be on the Canon website or on this help site ?
I'll keep looking around.
Steve

If you need photo software and don't have any you can download Canon software here.
http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a620#Dri...
But if you already have software you use there is nothing special you need. Ether connect the camera using a USB cable or remove the SD card from the camera and use a card reader (either an external one or the computer may already have one built in.)
If you decide to connect the camera via USB you don't need a driver; its built into W7.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Will itunes 11 work with windows xp, I have ended up with this neqw version and it doesn't work , I can look at my library ,but not play and since synching my ipod it is now empty. Apple support is useless, they treat me like I'm on a Mac not a PC .

will itunes 11 work with windows xp , I have ended up with this new version after accepting an update and now although I can view my library I can't play anything and since synching my ipod it is empty. Apple support can't seem to get it's head around the fact I'm on a PC keeps asking for an apple serial number, Help!!!

Morning gedeye,
Thanks for using Apple Support Communities.
System Requirements
Windows XP Service Pack 2 or later
32-bit editions of Windows Vista or
32-bit editions of Windows 7, and Windows 8
For more information on this, take a look at this article:
http://support.apple.com/kb/DL1614
Best of luck,
Mario

Will my ipod classic work with windows 8

I am finally updating my Windows XP desktop to a Windows 8 laptop. Will my ipod classic work with Windows 8? I've seen a ton of problems from other users with regard to compatibility.

Do yourself a big favor. Switch to Windows 7. (Or buy a Mac.)

Attempting to use certreq -enroll to enroll to a client authentication certificate works with Windows 8, but not with Windows 7...

This has been an issue for a while now. Trying to use certreq -enroll -machine [Template Name] on Windows 7 machines fails with not implemented. When I run this command with the -q flag I see that the certificate I want is unavailable and displays:
A valid certification authority (CA) configured to issue certificates based on this template cannot be located, or the CA does not support this operation, or the CA is not trusted.
When I go into the properties of this certificate and goto the Certification Authority tab and check the "Show all enrollment servers" it shows my server greyed out with this message:
The system could not determine if you can access this certificate. Not implemented.
The template sits on a enterprise 2003 server CA and this process works with Windows 8.1 machines. Which means that the template has the correct permissions and is issued correctly.
Is this a known issue with Windows 7 or am I missing something in the config? Help is greatly appreciated.
Thanks,

Hi
I have done some tests on a Windows 7 Enterprise machine and a Windows 8.1 Enterprise machine, it turns out that I have the same issue with you.
On the Windows 7 machines, I cannot use Certreq.exe to request machine certificates, but I can successfully request user certificates, and there is no issue with the Windows 8.1 machine.
Best Regards,
Amy
Interesting. From what I can tell, there are no patches that fix this issue either...

PhotoSmart dont work with Windows 7 ??

Similar Messages

Maybe you are looking for