Photosmart Duplex with Custom Paper Size

I've recently bought a Photosmart Premium C310a for a personal project where I needed a photo printer that could handle duplex printing and custom sized paper, which according to the spec this printer does.
However, when you try to do this the printer driver in Windows Vista tells me that custom sizing is not compatible with duplex printing, rendering the Photosmart Premium a large lump of plastic and wiring that I have no use for.
Has anyone got any ideas of how I can make this work?
Thanks,
Mark

Radlett wrote:
I am looking to print on 160mm x 160mm using 250 gsm paper. Any ideas of how I could do this or can you suggest a photo printer (or similar quality) that would print duplex using this paper?
Thanks,
Mark
OK, the paper weight is outside that "supported" for duplexing as shown in the user manual but it might work.
I do not have a c310a set up to test with but I tried with a c309a I have here. What exactly did you try? I set a custom paper size in the Printing Preferences, Features tab and then selected automatic two sided printing and it seems to work. Are you trying to print full borderless photo's in duplex mode? That is not supported and I do not know any way to make it work. It is also not supported (and will not work) to print with photo media selected and printing in duplex mode.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Problem with custom paper size on dot matrix printer

Hi All,
I'm using CR2008 with updated to SP2. I have a problem with custom paper size (W=21; H=14), the CR Viewer show report with custom paper size correctly but when I print it to a dot matrix printer (Epson LQ 300+) the content was rotated to landscape. If print to a laser printer the content was printed correctly. My report was printed correctly by CR10 or previous versions I got this issue when upgraded to CR2008. I aslo tested my computer and printer with orther application like MS Word the printing have no problem with custom paper size.
Thanks for any advice for me.
Han

Looking at the Epson LQ 300+ driver, I see that the latest update is from 2002. In my experience, most matrix printer drivers are not unicode. Crystal Reports is designed to only work with unicode printer drivers. See the [How Printer Driver Options Affect a Report|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a09051e9-721e-2b10-11b6-f9c65c64ef29&overridelayout=true] article, page 6 for details. Also, see [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Finally, see if you can print from the CR designer to this printer and if you get the correct results here.
Ludek

Problems with Custom Paper Size and Address Book

I'm having some trouble printing from Address Book onto a custom paper size. I'm attempting to set up a notecard, and only print one at a time, rather than multiple columns as in the Labels option. The trouble is that when creating this small size, Address Book doesn't recognize it as anything other than a regular sheet of US Letter, and thus prints the address in the middle of the page.
I have no problem printing envelopes, though, which seems odd because they too go in the manual feed for my printer. The notecards are similar width to the envelopes, but only about half the length.
Has anyone else experienced problems with custom paper sizes printing improperly? I'm using an HP 4515 LaserJet, but have access to a few other laser printers. Thanks for any insight

I have had the same problem, and with the same result; Adobe Tech Support can't help or fix, after 15 hours on phone, Level 2 support. It is a software bug Adobe has, and can't seem to fix. I just upgraded to Lightroom CC, and my problem migrated with the upgrade. I print in Photoshop fine.
If you found an answer, I would appreciate knowing how to do it!
Thanks

Anyone having issues with custom paper sizes?

I've narrowed down my printing problems to be primarily when using custom paper sizes. I still get regular crashes with standard sizes, but cannot print at all if I set up a custom size in A3. I am able to print custom sizes in Lightroom so it must be related to Aperture. I much prefer the way my prints look from Aperture, don't know why but when I export jpg or tiff files from A3 and import into LR the prints are very dull and color is off.
Anyone?

I have exact same issue after in my Iphone 4s. This started after upgrading to IOS 6.0.1
Has anybody got a solution?

CS6 Problem with Custom Paper Sizes

When printing on Epson printers (4800,4880,4900) in the Photoshop print settings dialogue box it won't allow me to print at a custom paper size using the sheet or manual feed settings. The paper feed option defaults to Roll Paper when I create the custom paper size, and then when I change it and try and save the settings it just reverts back to roll paper. If I try and send a print after this then the printer won't accept it because it's being told to print on a roll instead of sheet. Why is this?? I'm using CS6 and OS 10.7 and I've never experienced this problem with any previous Photoshop/ Mac OS X before. Please help!

I use a pc therefor Windows and PC Photoshop. Anyway The way this works in Philosophy windows print dialog you have to set both Photoshop print settings and the printer driver settings. And if Photoshop is to handle colors you must set off the device drivers color management. Photoshop Dialog has a printer setting button. I use that to set the device driver setting like color management off, print quality and custom paper size and source roll paper.
I also wrote a script to tile image into a document for printing on roll paper and eliminate paper waste. http://www.mouseprints.net/old/dpr/PasteImageRoll.html

Problems with custom paper sizes in Lightroom

Running Mac OS-X 10.9.3 (Mavericks). using an Epson Stylus Pro 3880, latest driver installed as confirmed by Epson tech support this morning. using Lightroom 5.4.
I only see this problem in Lightroom - not in Photoshop - which leads me to conclude that the problem is not an Epson-driver problem.
The problem is the following:
In the Print Module, I click on 'page Setup' bottom left. I define my custom paper size under 'Paper Size' -> 'Manage Custom Sizes'. Click OK.
I then enter 'Print Settings...' bottom left adjacent to the 'Page Setup' button. Select my printer, click on the 'Layout' drop-down list box button and select the 3rd tab in the list: 'Paper Handling'. Here is the problem: the 'Destination Paper Size' option is grayed out and unelectable, and incorrectly shows 'US Letter', which cannot be changed. If I click on 'Scale to fit paper size', and try to make a print to my custom paper that way, it still does not work: it only prints on a fraction of the whole paper.
I have also tried Apple menu -> System Preferences -> Printers & Scanners to change the default paper size there, but it makes no difference - it still incorrectly shows as 'US Letter' in Lightroom.
This problem does not occur in Photoshop: In Photoshop, if you go to File -> Print in the menu, and then hit the 'Print Settings' button near the top, my custom paper size is selectable in the 'Paper Size' list box. So it is a problem which is specific to Lightroom.
Any help appreciated. I have spent most of the day on the phone to Epson and Adobe Tech Support, and no-one has been able to dove the problem
Thanks,

I have had the same problem, and with the same result; Adobe Tech Support can't help or fix, after 15 hours on phone, Level 2 support. It is a software bug Adobe has, and can't seem to fix. I just upgraded to Lightroom CC, and my problem migrated with the upgrade. I print in Photoshop fine.
If you found an answer, I would appreciate knowing how to do it!
Thanks

Help with Java Printing-Custom paper sizes

Hi,
I'm trying to print documents with custom paper sizes out of java.
I can print fine when I don't try to set the MediaSize to a custom size or when I use already named constants like: "MediaSizeName.JIS_B4"
The error message I get is this:
java.lang.ClassCastException
     at javax.print.attribute.AttributeSetUtilities.verifyAttributeValue(Unknown Source)
     at javax.print.attribute.HashAttributeSet.add(Unknown Source)
     at hello.Printy.printDocument(Printy.java:103)
     at hello.Printy.main(Printy.java:135)
The offending line(103) looks like this:
pras.add(new MediaSize(1,10,MediaSize.INCH ));The function that its from looks like this:
public void printDocument()
try
          System.out.println("input file name is");
     System.out.println(inputFileName);
PrintRequestAttributeSet pras = new HashPrintRequestAttributeSet();
DocFlavor flavor = DocFlavor.INPUT_STREAM.AUTOSENSE;
PrintService printService[] = PrintServiceLookup.lookupPrintServices(flavor, pras);
PrintService defaultService = PrintServiceLookup.lookupDefaultPrintService();
PrintService printPrintService = null;
// didn't work pras.add(new MediaSize(1,10,MediaSize.INCH) );
PrintService service = ServiceUI.printDialog(null, 200, 200,printService, defaultService, flavor, pras);
if (service != null)
     System.out.println("There is a service aunty-may!!");
DocPrintJob job = service.createPrintJob();
FileInputStream fis = new FileInputStream(getInputFileName());
DocAttributeSet das = new HashDocAttributeSet();
//pras.add(new MediaSize((float)3.25, (float)4.75, Size2DSyntax.INCH ) );
// - works
//pras.add(MediaSizeName.JIS_B4);
pras.add(new MediaSize(1,10,MediaSize.INCH ));
//pras.add(new MediaSize(1,10,MediaSize.INCH) );
     System.out.println("Doc has been set to custom size");
Doc doc = new SimpleDoc(fis, flavor, null);
job.print(doc, pras);
     System.out.println("any doc for you?");
catch (Exception e)
e.printStackTrace();
}Any help with this would be greatly appreciated. I'm new to java but I've programmed a bunch in c++.

Hmm ... no real help, but I found this note in the API:
MediaSize is not yet used to specify media. Its current role is as a mapping for named
media (see MediaSizeName). Clients can use the mapping method
MediaSize.getMediaSizeForName(MediaSizeName) to find the physical dimensions of
the MediaSizeName instances enumerated in this API. This is useful for clients which
need this information to format & paginate printing.

Custom Paper Size : Migrating from 6i to 10g report server engine

Hi,
pardon my bad english !!
I'm studying to migrate form/reports 6i to 10G. In report 6i we have reports with custom paper size ("A5" format that is half of "A4", 15x21cm).
In report server 6i environment (Win2000 server) we have done this configuration.
- We configure printer; one input tray has "custom" format.
- We create an OS user (es. CustRep);this user has a "default printer" that has input tray with "custom" format as default tray.
- We create a new report server (es. CustRepSrv); this report server start as service with CustRep user credentials.
- Every report (PDF format) generated and printed (destype=printer,desname="My Printer") with CustRepSrv report server get custom format as paper size and so fit with Custom tray definition on the printer.
Can I do the same in report server 10G environment ??
Thanks
Andrea

Using these and not hearing much bad
Init Engine 1
Max Engine 6
Min Engine 0
Eng Life 10
MaxIdle 30
Trace Error
Trace Replace
I set my Report Server Parameters
CACHE SIZE - 700
CACHE DIRECTORY = (you have to decide)
IDLE timeout 120
Max Connections 120
Max Queue Size 4000
trace options = trace_err
trace mode trace_replace

Photosmart C410: How do I associate a custom paper size with the photo tray?

Our Photosmart 3310 recently broke down and I purchased a C410 to replace it. I sell a small item online that I ship in 3 5/8 x 6 1/2 envelopes. With the 3310, I had figured out a way to print the envelopes from the photo tray. While Word 2007 allows me to select the photo tray, the printer would not print from there until I created a custom paper size in the printer preferences dialog box.
One of the reasons I got the C410 was for the photo tray. It's a real pain to have to swap out the regular paper and stick in one evelope every time I want to print another envelope. Well, unfortunately, that's what I've been doing. I select the photo tray in Word, but the printer goes right ahead and prints from the main tray. I had forgotten what I did to make it work on the 3310, so I experimented with that printer's drivers until I figured it out.
My problem is that the software interface for the C410 is different than that for the 3310. I can't figure out how to associate a custom paper size with the photo tray. To test my theory this evening, I told Word that my envelope size was 5 x 7. The printer didn't hesitate to take an envelope from the photo tray. Of course the return address went into a dark void because the envelope is not 5 x 7.
The difference between the two interfaces is that the 3310 has both printing shortcuts as well as "Print Task Quick Sets." The C410 only has printing shortcuts.
If anyone can help me, I'll be very grateful! I've probably spent hours trying to get this figured out, and I have no idea what to do.

Hi,
Which Microsoft product (application) are you using ? Printer supports the following custom sizes:
From ADF: Custom-sized media (ADF) between 127 to 216 mm wide and 241 to 305 mm long (5 to 8.5 inches wide and 9.5 to 12 inches long)
From input tray: Custom-sized media between 76.2 to 216 mm wide and 101 to 762 mm long (3 to 8.5 inches wide and 4 to 30 inches long)
You need to select right custom size from the application.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can't duplex print B4 paper size with Snow Leopard and HP8100N

Apple print drivers dumped the standard European paper size B4 (see ISO 216 for specs) many OS's ago, however, I was able to duplex print B4, which is a standard size for the HP8100 trays, using the HP Duplexing accessory, by specifying a 'custom' paper size (10.14 x 14.33). Now, with Snow Leopard and the 10.6.4 and the updated HP8100 print driver from Apple, I get the message "The Duplex Option, Flip on Short Edge" is not available when the destination paper is set to Custom."
It seems the easiest solution would be for Apple to bring back the B4 paper size--I don't know why they eliminated it. The next solution would be for Apple or HP (whoever is responisble for the print driver) to back up to whatever allowed duplexing of custom sizes in all recent OS's up to Snow Leopard.
I have thousands of pages of music to print and manual duplexing just isn't an option. Anybody have any work-around ideas?

try converting your cmyk doocument to rgb and then print

HP Photosmart C4488 all-in-one custom paper size issue.

Hello, I just bought a new HP photosmart C4488 from the store. Not exactly just, few days back. I need prints on custom paper sizes. Heres my problem
I have a paper, plain paper, of dimensions 11.2x19.1 cms (measured by normal drawing scale). I designed an image in Photoshop with the same dimensions and 300 dpi resolution. But when I try setting the custom settings to that dimensions, I can't press OK. See the attached image for more clarity. Dimensions in the screenshot are different, but still I can't press OK there!
"Windows cannot detect any keyboard attached to the computer. Please press any key to fix the problem"

I had this same problem and discovered that what I had to do was give my custom size a name, then after you do that, you get the 'save' button and it will be listed among the seletions availabe under 'more.' I am not sure why it wouldn
t have been possible to have put a little note saying to name your custom size as the current method isn't intuitive. On the other hand, now that I have the size listed, I can't figure out how to actually get it to work as when I choose it, it tells me the size is incompatible with the paper type and does that for all the normal paper types! So I hope it works and better luck to you on this than I am having..

Managing Custom Paper Sizes with the Epson 2000P

Hi,
I recently started using the iMac and after installing the software for the Epson 2000P found that I could not print a 13 x 44 image. I set up a custom paper size and when the page printed it only printed 18" of the image. I tried the Epson 1280 with the same set up and was able to get 22". I thought maybe the file was to large a cut it in half with no luck. I increased the memory allotment of the program as well and still no luck. I have emailed and called Epson support and can't get any answers from them so I thought I would check here at Apple. If you have any advice I would greatly appreciuate it.
Thanks
2 GHz Intel Core 2 Duo Mac OS X (10.4.10)

Hi,
Crystal Reports 2008 supports custom page sizes. You can set this in the Page Properties for the report in the Crystal Reports Designer, I'm not sure if you can set it in the SDK as well.

Help with custom page size support for non standard paper

Firstly, we appreciate any support you may be able to provide, we have already thrown considerable effort at this and it has been very time consuming and frustrating.
To support a number of business functions need to print to (non standard) continuous and mulitpart paper on a dot matrix printer. The (test) Mac is a 10.4.11 G4 laptop, the printer is an Oki Microline 520 (9 pin 80 column, IBM Proprinter, Microline or Epson FX personalities with a parallel interface) which has been networked via a HP JetDirext Ex Plus print server. That part appears to be operating correctly.
We have tried a number of drivers / printer personalities with varying levels of success:
ESP / EPSON 9-Pin Series CUPS v1.1 / Epson FX personality
ESP / OKIDATA 9-Pin Series CUPS v1.1 / Oki Microline personality
Ghostscript / epsonc / Epson Dot Matrix Foomatic PPD / Epson FX personality
Ghostscript / ibmpro / IBM ProPrinterII Foomatic PPD / IBM Proprinter personality
Ghostscript / okiibm / Oki Microline IBM compatible 9 pin Foomatic PPD / IBM Proprinter personality
There were no appropriate drivers in Gutenprint (5.2.3 version) The most successful is the okiibm / Oki Microline IBM compatible 9 pin settings, it can print A4 and honors the Printer Features Resolution settings in the print dialogue.
Q1: Should we see anything in the Printer Info / Installable Option, it is always blank ?
The issue is custom page sizes, we can manage / add Custom Pages Sizes via the Page Setup / Paper Size interface and they draw on the screen OK but they do not work at the printer (various issue at the printer such error messages, junk printing and wrong orientation):
Q2: Are we heading in the right direction or is there a better way to handle this ?
Q3: Would 10.5 solve all our problems, are the print drivers any better ?
Q4: Is this the correct way to specify custom page sizes, is this all we need to do ?
Q5: Is so how do we get the driver to respect the size, do we need another filter or something ?
Q6: Is it possible to add (by hand) custom page sizes to the ESP drivers or Foomatic PPD files so they they appear as a "standard" offering in the Page Setup / Paper Size interface ?
Sorry for the long / complicated post and thanks in advance for any advice / assistance.

Matt Broughton wrote:
Testing on 10.5.7, Tried both Oki 9-Pin Series 1.3 / Microline personality (no joy) and Epson 9-Pin Series 1.3 (this is a much better driver than 1.1) / Epson FX personality but not much joy with custom page sizes,
The Oki 9-pin Series 1.3 and the Epson 9-Pin Series 1.3 should produce the same results. The only difference in the PPDs is the printer model name.
After some testing, I find that the output is not the same despite the two PPDs being virtually identical. I did spot in the CUPS source code for the rastertoepson filter that there is some model name matching for Epson printers. Thus I can see where the output using the Oki 9-pin PPD could be different than when using the Epson 9-pin PPD.
but again once I imbedded the page size into the ppd some (but frustrating) luck. I can get it to respect the paper orientation and it prints well but I could not get the form length to work properly. At best over a print run of 7 labels it would creep up the label by about 0.1 inches / 2 mm.
Just for the fun of it, I made some additions to the Epson 9-pin 1.3 PPD. All I can say is that I could print a job to file. I have no way to know what it would look like on paper.
I did find that using a custom paper size did add some unwanted margins to the output bounding box. Putting the custom page size into the PPD seemed to get around that issue.
I added the following lines to the Epson 9-pin PPD 1.3--
<pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">*PageSize Label1/Label1: "<</PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*PageRegion Label1/Label1: "<<PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*ImageableArea Label1/Label1: "0 0 288.00 107.80"
*PaperDimension Label1/Label1: "288.00 107.80"</pre>
This adds a paper size with the 4 inch (288pt) width and 1.5 inch (107.8pt) height. That represents the 1.4 inch label and the 0.1 inch gap between labels. I set 0pt margins except for the bottom where is set the 0.1 inch (7pt) gap as the bottom margin.
The full diff in context is--
<pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">loki:~ matt$ diff -u /usr/share/cups/model/epson9.ppd ~/Desktop/epson9.ppd
--- /usr/share/cups/model/epson9.ppd 2009-02-20 20:16:53.000000000 -0600
+++ /Users/matt/Desktop/epson9.ppd 2009-06-06 20:37:06.000000000 -0500
@@ -42,6 +42,7 @@
*PageSize Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
*PageSize A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
*PageSize FanFoldUS/US Fanfold: "<</PageSize[1071 792]/ImagingBBox null>>setpagedevice"
+*PageSize Label1/Label1: "<</PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*CloseUI: *PageSize
*OpenUI *PageRegion/Media Size: PickOne
*OrderDependency: 10 AnySetup *PageRegion
@@ -50,17 +51,20 @@
*PageRegion Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
*PageRegion A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
*PageRegion FanFoldUS/US Fanfold: "<</PageSize[1071 792]/ImagingBBox null>>setpagedevice"
+*PageRegion Label1/Label1: "<<PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*CloseUI: *PageRegion
*DefaultImageableArea: Letter
*ImageableArea Letter/US Letter: "18.00 18.00 594.00 774.00"
*ImageableArea Legal/US Legal: "18.00 18.00 594.00 990.00"
*ImageableArea A4/A4: "18.00 18.00 577.00 824.00"
*ImageableArea FanFoldUS/US Fanfold: "18.00 18.00 1053.00 774.00"
+*ImageableArea Label1/Label1: "0 0 288.00 107.80"
*DefaultPaperDimension: Letter
*PaperDimension Letter/US Letter: "612.00 792.00"
*PaperDimension Legal/US Legal: "612.00 1008.00"
*PaperDimension A4/A4: "595.00 842.00"
*PaperDimension FanFoldUS/US Fanfold: "1071.00 792.00"
+*PaperDimension Label1/Label1: "288.00 107.80"
*MaxMediaWidth: "1080.00"
*MaxMediaHeight: "86400.00"
*HWMargins: 18.00 18.00 18.00 18.00</pre>
I don't know if that will help you or not. Let us know what sort of progress you make.
Matt

I hooked my P4014n printer up to a new computer with windows 7. I defined my custom paper size

I hooked my P4014n printer up to a new computer with windows 7. I defined my custom paper size AND WHEN i PRINT TO IT IT PRINTS AS THOUGH IT IS TRYING TO USE LETTER SIZE PAPER

See this <br />
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

Custom paper size with HP Officejet 7500A Wide Format e-All-in-One Printer

I am wanting to print on a paper size 12x18. I do not find a "Custom" paper size on my printer HP Officejet 7500A Wide Format e-All-in-One Printer. Is there another driver which I can download which would allow me to enter custom paper sizes?

I am wanting to print on a paper size 12x18. I do not find a "Custom" paper size on my printer HP Officejet 7500A Wide Format e-All-in-One Printer. Is there another driver which I can download which would allow me to enter custom paper sizes?

Photosmart Duplex with Custom Paper Size

Similar Messages

Maybe you are looking for