Photosmart eAll-in-on​e C310a prints from computer and scans very slowly.

When I highlight a part of an article on my computer to print and then select print preview, it takes about 2 minutes for “as laid out on screen” to show. Then when I select “as selected on screen” it takes about 2 minutes to show. It takes about 2 minutes to change from portrait to landscape. The Photosmart eAll-in-One C310A Printer on my Wi-Fi home network takes about 4 minutes to scan one page. It used to scan fast. Something has changed recently to cause my printer to print and scan very slowly. I have Microsoft Windows 7.
G Sipes

Hello, 
Please try deleting the content of TEMP folder.
on PC > press Win + R , a RUN window would show up.
type in %TEMP%, OK button , a Temp folder will open . Please delete its content. 
Restart the PC, and then try scanning.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Similar Messages

  • I try to print to printer from computer and nothing happens. it is a wireless printer

    how do i print from wireless printer and computer?

    Hello btlcrzy48.
    It would help knowing which printer model you have and which Operating System you are using with your printer.
    Cheers!
    Wixma.
    I am an HP employee.
    Say thanks by clicking the Kudos star in the post.
    If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people.

  • I have an Ipad and Iphone but I don't have an Airprint, only a WIFI printer,my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ?

    I have an Ipad and Iphone but I don't have an Airprint at home but only a WIFI printer, my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ? Please help me if anyone knows about this.

    Unfortunately, connecting a non-AirPrint-enabled printer to an AirPort base station's USB port will not make it AirPrint-ready.
    You will need to use another solution, like Printopia, to be able to print to this printer from an iOS device.

  • Different Colors when printing from Photoshop and InDesign CS3

    Different Colors when printing from Photoshop and InDesign CS3
    I have the following problem:
    When printing from Photoshop or InDesign to a PostScript printer, Adobe recommends to let Photoshop handle the colors (I use the German version, so I don't know the exact term used, it changes slightly in all CS3 apps anyway).
    The manufacturer however told me to let the PostScript printer handle the colors.
    When I chose this option in Ps's print dialog and then choose ISO Coated as the printer pfofile, the results are fine.
    But when I place the exact same image in an InDesign file and print from InDesign or export to PDF and print via Acrobat, again using "Printer handles colors", the results are the exact same as if I had used Ps and chosen to let Ps handle the colors (way too saturated and a bit too red).
    ·Photoshop CS3
    ·InDesign CS3
    ·Test image is a TIFF in CMYK Fogra 27 Coated (which is also the working color space in Ps and ID.
    ·Printer: Xerox Docucolor 3535
    ·Printer profile: ISO Coated
    How can I make sure the printer handles the colors in other CS3 apps than Ps? I tried it with ID's print dialog (translated from the German version: Color Management > Options > Color Handling: PostScript-printer decides colors).
    Thanks a lot!

    RE: "You don't indicate what Xerox printers you have"
    In my first post I named it, is that the information you need?
    Docucolor 3535 using Splash 3535
    That's interesting, so I have to find a way to turn off the printer's Color Management function? I mailed them, hope they can tell me how to do it easily. They usually just tell me to not use any profiles and so on, but that's the general rule in this area, I'm really tired of hearing it. Everybody seems to think profiles and LAB mode are nuclear science and I should stay away from it.
    Anyway, the test image I'm using is a simple photograph (size A3, 300dpi), so no transparencies at all. I'm placing this image into an equally large ID file and print it from ID, then export it to PDF-X/3 and print it from Acrobat. Hope that helps.

  • My hp wireless printer prints from computer

    my hp wireless printer prints from computer, but not ipad or i phone. officejet 7500a no wires hooked up. wireless is working. router works and network works. please help

    I assume you have enabled Web Services from the front of the printer?
    First, try restarting your router by pulling its power plug momentarily.
    If that does not work, let's set a static IP address & external DNS for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (on the Network Config Page) for the gateway.
    - Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I'm unable to print from safari and email on iPad 2, I'm newbie

    Hi there,
    I have the new iPad 2, I understand that it should be able to print from safari and email. I've seen AirPrint floated around, but it doesn't appear to be an app in the app store since my searches come up empty. I've printed before from my iTouch using PrintMagic but it's cut and paste to plain text document and I print wirelessly to the printers connected to my iMac.
    I would really like the email and the web page to remain formated. I've seen Print Central but it seems convoluted to get it to print, I've also seen a youTube video print directly from Safari and email programs that's desirable but the videos didn't show how to set up printer (it's kind of Walter Foster) there seems to be some steps that are missing. Could someone fill in the blanks? it would be appreciated.
    Thanks
    JLS

    Ok.  Airprint is built into the ipad.  There is no app. It is a printer driver system that some printer manufacturers have incorporated and some have not.
    If you have an airprint printer, then printing is simple and formatted like you expect itmto be.
    If you do not have an airprint enabled printer, then you need an app, like the ones you mentioned, and are stuck with the issues you mention.
    Nobody wants to buy a new printer.  But they start at well under 100.  The next time you need to refill your rprint cartriges, you might find it worthwhile to do the switch to a new airprint printer.
    Here is the current list of airprint enabled printers.
    http://support.apple.com/kb/ht4356

  • Strange difference in prints from Photoshop and InDesign

    Hello,
    Recently I upgraded to CS5 but at the same time upgraded my good old Power Mac G5 to a 27" iMac i7.
    I also traded my Epson 7600 for an Epson 9800. So obviously many things changed at the same time.
    Now I created a new profile for my printer paper and noticed the folowing strange thing:
    When printing from photoshop the prints are consistently way too dark.
    When printing from InDesign the same photo it is perfectly as it should be and looks on screen.
    Then I checked printing from Preview and again way too dark, same as in Photoshop
    I applied the same printerprofile to all printjobs
    During the profiling I also printed the testpage from the Datacolor Spyder 3 software, which was perfect
    printing the same testpage from Photoshop: way too dark.
    I don't have a clue to where things are going wrong.
    Is it a bug in Photoshop,but why then also in Preview?
    is it the way the printerdriver handles things? But then why not in InDesign?
    Anyone any ideas?
    Regards,
    Hans

    Have you gone into the "Print Settings" dialog and turned off color matching in the Epson portion of the settings?
    Are you running the most recent version of the driver? There is a combination updater to version 7.0 available as the first result at:
    http://www.google.com/#hl=en&source=hp&q=epson+common+updater+v7.0+9800&btnG=Google+Search

  • Won't print from computer

    my printer won't print from computer but will from an sd card

    Hi,
    Download and run HP Print and Scan Dr utility from link below to troubleshoot the issue.
    www.hp.com/go/tools
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • How to print from iPad and iPhone with no air print printer

    Have a Kodak hero 9.1 printer. How can I print from iPad and iphone

    Kodak may offer an app to help you.  Check the App Store.
    I have an Epson printer.  There's an Epson app, but its abilities are much more limited than AirPrint (e.g., Epson app does not print from Safari).

  • I have problems in communication between my notebook and Epson printer. It goes offline everytime I unplug it from the notebook and there is no way how to switch it on. Although the printer is recognized and scanning is not a problem. Any solution?

    I have problems in communication between my notebook and Epson printer. It goes offline everytime I unplug it from the notebook and there is no way how to switch it on. Although the printer is recognized and scanning is not a problem. Any solution?

    this is exactly the kind of response i expected, almost begged support to please not do this to me and yet there it is another meaningless, non helpful, standard template response to restart my apple tv.
    this does NOT work which is why i am contacting you. i have tried all suggestions about unplugging and restarting and nothing works.
    i live in an apartment and logon to the provided wifi wireless. so i do not have access to a router. however, management says they have talked with their provider and have been assured that the required ports are available.
    remember all the jokes about how bad windows was because the solution was always to re boot. funny huh? how is apple any different.
    i have been to the local apple care store and they are clueless, too.
    should we just end it here and you admit that i will not be getting any support from apple on this one? i got the ipad because my kids were such big fans. it is difficult for me to share their enthusiasm.
    at this point i am just curious about how you say you cannot support your own product so i can complete my file on this contact.
    thanks...sorry it was you who got this problem..

  • TS1717 try to open and says program can't start because MSVCR80.dll is missing from computer and says windows error 126

    try to open itunes on my computer and get messageprogram can't start because MSVCR80.dll is missing from computer and a windows error 126 comes up

    Hi arw8669,
    If you are having issues with iTunes after an attempted update, you may find the following article helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Regards,
    - Brenden

  • I deleted my iMovie from computer and from my purchases list in AppStroe. When I'm trying to download it again from App Store a pop up window comes up and says: "These apps were already assigned to your Apple ID and are available in your Purchases list"

    I deleted my iMovie from computer and from my purchases list in AppStroe. When I'm trying to download it again from App Store a pop up window comes up and says: "These apps were already assigned to your Apple ID and are available in your Purchases list". Please help me to reinstall it.

    If new versions of iPhoto and the other iLife applications (iMovie and GarageBand) were purchased by the previous owner from the Mac App Store, then they will be locked to the previous owner's Apple ID and cannot be transferred to you. You will have to re-purchase them under your own Apple ID.
    If this is an older MBA that came with Snow Leopard or an earlier version of Mac OS X, though, the system would have come with an installation disk that included the iLife applications, a disk which the seller should have provided to you. Those iLife applications would be older versions, of course, and may or may not work in Lion depending on how old they are.
    Regards.

  • HP Photosmart Premium all-in-one C310a printer, Solution Center will not stay installed.

    It seems lately, past month or so, that the HP Solution Center keeps failing and needs to be reinstalled.  I get a message which says:" HP Solution Center cannot run because your device installation is not complete." followed by a list of steps to take to remedy the situation, which do not work.  I have to uninstall and reinstall the printer and then it will work, but after I shut the computer down for the day or run a virus scan (PC Matic) the problem returns.  Can anybody help me? 

    Hi @oboe1827,
    Welcome to the HP Forums! 
    I see that your HP Solution Center will not stay installed for your HP Photosmart Premium c310a printer. I am happy to help you resolve this issue!
    For further assistance, I will need some more information:
    If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
    If the printer is connected, Wireless, or USB.
    If the printer is able to make copies.
    If you are using Windows, please try the HP Print and Scan Doctor, and let me know what happens!
    Hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • HP Photosmart Premium C310a Printer paper alignment and paper feed problem.

    Standard Info:
    HP Photosmart Premium C310a Inkjet All-in-one Printer.
    Windows 7 Home Premium
    No reported errors messages except for paper jams.
    No changes were made to the system before the problems began.
    My Info:
    I am very proficient with computers and electronics. I would first like to say that this printer has very vibrant inks and its ColorSmart/sRGB ICC profile is pure magic. The high DPI ratings have turned out to be accurate so far and the printer prints beautiful images.
    Problems:
    The problem I am having is with the printers paper feed rollers.  They are not scrolling the paper through the printer accurately and consistantly.  There have also been two paper jams when using multipurpose everyday paper.  When printing high res artwork using HP Advanced Photo Paper I was using HP Photosmart Essentials to create an 8"x10" picture on the 8.5"x11" paper and the first 35-40 prints came out accurately but then, before any paper jams or other problems the 8x10 pictures began to not center correctly on the paper.  Then the top of the 8x10 picture started slanting to the right on the paper and extending too close to the right edge of the paper.  The entire 8x10 picture is no longer printing 8x10 (the left side of the picture is just over 8" tall and the right side of the picture is printing just under 8", same thing with the top and bottom edges of the image) and is not centering properly on the paper.  I  just had my second paper jam last night which I clicked the "cancel print" button on the front of the printer touch display to eject the paper.  Immediately after, everything began printing very close to the left edge of the paper and prints at an angle down the sheet no matter what it is that I print or what paper it is printed on.  I have tried using the auto alignment feature on the printer several times and it does not help. 
    Questions:
    Is this printer purchased on 09/25/2011 from hp.com (with no extended warranty) still under a regular warranty?
    If I send it in for repairs will HP be able to fix these problems?
    Is there any way that I can adjust the scrollers myself to fix the problem?
    Is the new C510a more reliable than the C310a in this field?
    I need a backup printer for my art business, I would like to purchase an HP C510a, but am concerned I will have the same problems with the new one.
    If anyone can help, please respond.  I cannot go on with these problems any longer.
    Thank you for your time,
    Nanette

    Thank you for your quick response Bob.  Your answer was helpful, but did not solve my problem.  I have cleaned the printer exactly as your response has suggested, but there has been no change, and I was not able to find any dirt, scum, dust, or anything at all wrong with the rollers.
    Here are a few pictures of some 8"x10" pictures that I just printed on 8.5"x11" HP Advanced Photo Paper:
    These 8"x10" images are supposed to be centered on the paper, but are FAR from centered or dimensionally accurate to 8"x10".
    This last image shows really well how the top of the 8"x10" image slants downward from left to right as well as approaches too close to the right edge of the paper.
    Is this a problem that I can fix on my own?
    If I send the printer to HP for repairs will they be able to fix this problem or will they just clean the printer scrollers and send it back thinking it is fixed?
    I really need help with this problem, because right now, the printer is not useable.
    Thank you for your help.
    -Nanette

  • I am using a C310A Printer from Photoshop CS5.5 to make 4 by 6 printsThe printer switches to 4 by 6

    How do I get the C310A printer to default to 4 by 6 from the tray.  I have used the Photosmart D5460 in the past and it remembered to use 4 by 6 paper after the first print, the C310A changes to letter size on the second print
    This question was solved.
    View Solution.

    Do you have Windows 7?  Try the following with CS5.5 closed go to the Devices and Printers folder and set the printer preferences for the C310a for 4x6 photo media and the desired quality.  Save these settings, then open CS5.5 and try printing two photos.  
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for