Photosmart P1100 non-driver software

I am looking for the software that came with the P1100. It works with XP and it has a photo editor called Photo Imaging or printing software. I had the printer an it died but love the photoediting software that came with it. Lost the hard drive that it was installed on due to a bug and want to find it again. I have loaded photo essentils 3.5 and it is not it. If anyone has a copy or could burn a copy I would pay them for it and shipping to 66062 (Kansas City).
Brent ([email protected])

Hi , Welcome to the HP Forums! I see that you are having trouble installing your HP Photosmart 7525 on Windows 8.1. I am happy to help! Please try the following steps: Uninstall the software. Uninstalling the Printer Software. (Only if the software was previously installed or partially installed. Otherwise, carry on with the rest.)Clean boot the computer. How to perform a clean boot in Windows.Disable any Antivirus programs. Disable Antivirus software.Disable any firewall programs. Windows Firewall from start to finish.Create a new user account. Managing User Accounts and Logins (Windows 8).Reinstall using the HP Printer Install Wizard for Windows. Hope this resolves your issue! “Please click the Thumbs up icon below to thank me for responding.”

Similar Messages

Driver software for Photosmart 7525

Keep getting a message "The wizard has detected a problem with the driver software for the selected printer"I have restarted and re-installed but cannot seem to get the drivers to properly install so i can set up the printer. Please help.

Hi , Welcome to the HP Forums! I see that you are having trouble installing your HP Photosmart 7525 on Windows 8.1. I am happy to help! Please try the following steps: Uninstall the software. Uninstalling the Printer Software. (Only if the software was previously installed or partially installed. Otherwise, carry on with the rest.)Clean boot the computer. How to perform a clean boot in Windows.Disable any Antivirus programs. Disable Antivirus software.Disable any firewall programs. Windows Firewall from start to finish.Create a new user account. Managing User Accounts and Logins (Windows 8).Reinstall using the HP Printer Install Wizard for Windows. Hope this resolves your issue! “Please click the Thumbs up icon below to thank me for responding.”

Portal drive software for Windows 7 (64-bit)

Hi...Experts
We could not find the portal drive software for Windows 7 (64-bit) OS on service market place. The one which is available on market place is working fine for Windows 7 (32-bit ) but it does not work for 64-bit.
Can any one help us to get the 64-Bit Portal Drive
Rgds
PR

1- Set BasicAuthLevel's value to "2" by expand HKEY_LOCAL_MACHINE >> SYSTEM>>CurrentControlSet>>Services>>webClient>>Parameters
2- Restart your computer.
3- Right click "Computer" and click "Map network drive..."
To Letter Field: Set a free drive letter.
To Folder Field: Assume that your webDav address is http://abc.com:50000/irj/go/km/docs/ change it to
abc.com:50000irjgokmdocs
4- Enter your ID an Password
thats all...
Note: The mapping is as follows:
0 - Basic authentication disabled
1 - Basic authentication enabled for SSL shares only
2 or greater - Basic authentication enabled for SSL shares and for non-SSL shares

An alternative to the buggy e2200 Killer Ethernet Driver/Software (GE60)

After several crashes related to the bad Bigfoot Killer Ethernet software and driver, I decided to dig a little deeper.
Most people will be able to tell you that the "Killer Ethernet" is fairy pointless, I didn't buy the laptop for it at any rate.
It's worse than pointless when it causes system instability and crashes.
After a little research I determined that the "Qualcomm Atheros llama Ke2200 Series PCI-E Ethernet Controller" is actually a "Qualcomm Atheros AR813X/AR815X/816X Series PCI-E Ethernet Controller"
Specifically it's a slightly modified AR8161 Gigabit Ethernet [1969:1091].
As such you can download newer, unmodified drivers from Atheros directly, just google for: atheros+download and visit the first link.
On the Atheros site under "AR816X Family Drivers" choose the "WIN_AR816X" option from the dropdown box.
However, the vendor and device ID won't match, so you'll need to do the following to install it.
Keep in mind that these are raw drivers, they're work perfectly, but include none of the fancy (useless) "Killer" software features.
Lets get started!
Download the file above and extract it to a temporary location.
First, (because removing the killer Ethernet software is part of the goal here) you should go to control panel and uninstall the existing bigfoot killer Ethernet package from "Programs and Features".
1) Head to control panel and open "Device Manager".
2) Under "Network Adapters" right click on the e2200 Killer network card and choose "Update Driver Software".
3) Click "Browse my computer for driver software".
4) Click "Let me pick from a list of device drivers on my computer.
5) Click "Have Disk".
6) Click "Browse"
7) Find the folder you extracted and navigate to "AR813x_AR815x_AR816x_v2.1.0.15_WHQL\Common_Dri\Win8_64"
8) Select "L1C63x64.inf" and click Open, then OK.
9) From the list of drivers choose "Qualcomm Atheros 8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30)"
10) Choose "Yes".
11) Now choose "Close".
In Control Panel your network card will now be called "Qualcomm Atheros 8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30)"
You're now running the latest Atheros driver for your rebranded Atheros AR8161 Ethernet Card.

Quote from: mish on 10-April-13, 17:48:06
After several crashes related to the bad Bigfoot Killer Ethernet software and driver, I decided to dig a little deeper.
Most people will be able to tell you that the "Killer Ethernet" is fairy pointless, I didn't buy the laptop for it at any rate.
It's worse than pointless when it causes system instability and crashes.
After a little research I determined that the "Qualcomm Atheros llama Ke2200 Series PCI-E Ethernet Controller" is actually a "Qualcomm Atheros AR813X/AR815X/816X Series PCI-E Ethernet Controller"
Specifically it's a slightly modified AR8161 Gigabit Ethernet [1969:1091].
As such you can download newer, unmodified drivers from Atheros directly, just google for: atheros+download and visit the first link.
On the Atheros site under "AR816X Family Drivers" choose the "WIN_AR816X" option from the dropdown box.
However, the vendor and device ID won't match, so you'll need to do the following to install it.
Keep in mind that these are raw drivers, they're work perfectly, but include none of the fancy (useless) "Killer" software features.
Lets get started!
Download the file above and extract it to a temporary location.
First, (because removing the killer Ethernet software is part of the goal here) you should go to control panel and uninstall the existing bigfoot killer Ethernet package from "Programs and Features".
1) Head to control panel and open "Device Manager".
2) Under "Network Adapters" right click on the e2200 Killer network card and choose "Update Driver Software".
3) Click "Browse my computer for driver software".
4) Click "Let me pick from a list of device drivers on my computer.
5) Click "Have Disk".
6) Click "Browse"
7) Find the folder you extracted and navigate to "AR813x_AR815x_AR816x_v2.1.0.15_WHQL\Common_Dri\Win8_64"
8) Select "L1C63x64.inf" and click Open, then OK.
9) From the list of drivers choose "Qualcomm Atheros 8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30)"
10) Choose "Yes".
11) Now choose "Close".
In Control Panel your network card will now be called "Qualcomm Atheros 8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30)"
You're now running the latest Atheros driver for your rebranded Atheros AR8161 Ethernet Card.
There isnt anything to download here.

Website doesn't work for downloading driver software

http://support.hp.com/us-en/product/HP-Officejet-Pro-8600-Plus-e-All-in-One-Printer-series---N911/43... doesn't work for downloading driver software, the link to your page sends me here and it just hangs

Suz1st wrote:
I also had download issues re: with getting a newer driver version.
I have an HP Photosmart Premium (All-in-One_ model c309g-m )
can you send me a link for that driver?
What operating system? ForXP, Vista or Windows 7 download the latest software from the link here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

I have using I phone 5c after connected with my HP elite book 6930p laptop, Automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.

I am using I phone 5c after connected with my HP elite book 6930p laptop, (Installed Window 7 32 bit). automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.
I did install itunes and update also. but the above problem still same.
Kindly give me solution of it. awaiting.
Regards
Abbas Kader

try it with another computer to check if it shows up
if so
uninstall all apple software
reboot
use regedit to search and remove all itunes keys
reboot
resinstall apple software
if non of that helps then try another cable
if that don't help could be your phones connector is damaged

Where is Adobe support for non-working software??

Where is Adobe support for non-working software??
Thanks,
Jerry

Bill,
Thank you for your reply!
You may have guessed I am a bit exassperated. (See this discussion from yesterday.) (Re: How do I get past the Error: 16 problem?
I am trying to move Adobe Acrobat IX, Photoshop CS6, Photoshop CC and Bridge to a new computer (Mac Pro (late2013), Mavericks 10.9.3) from an older Mac Pro using the same OSX.
I keep getting the error 16 message whether I try to open Acrobat or Photoshop (I have a paid for DVD of CS6). I have uninstalled and re-installed. I have reset permissions on 2 folders ion the system Library. I have either deactivated or signed out of ALL the Adobe products on my old computer. I signed in as 'Root' and tried to open the software. I have re-downloaded all the products except CS6 which I own. I have restarted the computer. I have repair the drive using Disk Utility and Disc Warrior. In short I have tried everything I can think of and that which has been suggested my others on this Forum.
Thanks again,
Jerry

T61: Windows needs to install driver software for your ATA Device-help!!

Every once in a while after I turn on my laptop I get this message: "Windows needs to install driver software for your ATA Device." WTF? REALLY W-T-F? I am not computer illiterate When I reinstall the driver (from the site) it works. Then I turn on the computer and get the same message. PLEASE HELP... W-T-F?????????
The DVD player has been out of commission all of May so far. I can't stand this. What is happening?
I can't even download the driver from Lenovo.
PLEASE HELP.
Thanks in advance.
You are a God if you can't help me fix this.
Moderator note: Type added to subject line for clarity. The title of a thread should accurately reflect the subject of the discussion and be as technically specific as possible as stated in the forum rules.
Message Edited by Agotthelf on 30-05-2009 08:21 AM

Welcome to the forum!
Since I'm not quite certain that God frequents this forum, would you please tell us the model number and operating system of your ThinkPad and we'll take it from there...
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Windows vista, Ipod shuffle 4th gen. Computer cannot find device driver software for ipod.

After several hours trying the troubleshooting options provided by the apple support site, I have come to what I think is the issue here. My girlfriend recently got an ipod shuffle and when plugging it into her computer the dialog pops up saying it is installing device driver software for the ipod. Eventually it asks me to insert the CD that came with the ipod. No CD came with the ipod, so I click the option that says "I do not have my cd". Then it gives me the option of searching automatically or manually for the driver software. The automatic way can't find it. Doing it manually, with the help of the troubleshooting page, didn't work either. google search can't seem to help me on this one. Also, I tried plugging the ipod into my computer (not hers) and it worked fine, it was able to install the device driver software on its own. Does anybody know the issue here? My computer has windows 7, and hers has vista. Hers is Serice Pack 1. When I tried installing service pack 2 it wouldnt work. I don't know if that is the issue though. I have tried just about everything, I think the issue is finding the device driver software. When I do a google search nothing comes up, so I have no idea what to do at this point. Any help would be appreciated, thanks.

Well its surprising to know that! But even have an ipod shuffle 3rd gen n dint face any problem like that. FYI no cd comes with the ipod jus take ur ipod to an apple exoert n he will solve ur problem .

Cannot find the driver software for my printer hp 1515

First i found it..but then i realized that it for hp 1510 printer,so i had stopped the download. but then, itry again to download but it not show the dowload for software, it only show the utility download. what should i do? i need the driver software because i'm using netbook that there's no place for cd driver to install.i want to use my printer but can't because not install yet.where can i find the driver software download?

Hello,
If your PC works on Windows 7 / 8 or 8.1, then please download and run the HP Print and Scan Doctor from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

New laptop can't find the driver software for my ipod. What should I do?

Previously I've used a family member's computer to sync their songs onto my iPod. We have very different tastes in music so I was excited to finally get my own songs on here. I now own my own laptop and have installed the most recent iTunes. However, whenever I plug the Ipod in it says "Windows needs to install driver software for your Unknown Device" I click locate and install driver software but it doesn't work and remains an Unknown Device and I can't sync songs. Should I have a CD or something for this? I have a 2nd gen. iPod nano so if I ever did get one it's long gone now...

sheamb wrote:
I have downloaded 10.6 but it says that it is not the next update. Any suggestions?
where did you download 10.6 from? It is only available on a DVD.

How to do a single channel DAQ using NI-DAQ driver software with a PCI-MIO-16XE-10 card

Hi,
I would like to find out how I could do a simple one channel Data Acquisition from a signal generator using the NI-DAQ driver software with a PCI-MIO-16XE-10 card.
I have written some test problem but even when the signal generator is turned on/off I get back some weird values.
Here is my code.
CString sFunctionName("");
double volt[OUTPUT_POINTS*2];
double out[OUTPUT_POINTS*2];
short timebase, ready, code, stopped;
unsigned short sampleInterval;
int i, status, count=0;
unsigned long update, points;
short* ai_buffer;
short output_ch_vector[16];
int local_ITERATIONS = 2;
SAFEARRAYBOUND bound[1];
double dataItem = 9.9;
long j;
long k;
double* pTheValues;
LPTSTR lpsz_ErrMsg;
// Initialise device
status = Init_DA_Brds (deviceNumber, deviceNumberCode)
Initializes the hardware and software states of a National Instruments
DAQ device to its default state and returns a numeric device code that
corresponds to the type of device initialized
Init_DA_Brds(DEVICE, &code);
// Check return code from Init_DA_Brds
Code return should be 204: PCI-MIO-16XE-10.
if (code < 0)
CString sError;
sError.Format("Code error: %d", code);
if (code == -1)
sError = sError + ": No device found";
LPTSTR lpsz = new TCHAR[sError.GetLength()+1];
_tcscpy(lpsz, sError);
AfxMessageBox(lpsz);
delete lpsz;
return S_FALSE;
// Allocate memory for analog output and input arrays
//ao_buffer = new short[OUTPUT_POINTS*2];
ai_buffer = new short[OUTPUT_POINTS];
// Set double-buffering
status = DAQ_DB_Config (deviceNumber, DBmode)
Enables or disables double-buffered DAQ operations.
status = DAQ_DB_Config(DEVICE, 1);
if (status < 0 )
sFunctionName = "DAQ_DB_Config";
goto TidyUp;
// Get the rate parameters
status = DAQ_Rate (rate, units, timebase, sampleInterval)
Converts a DAQ rate into the timebase and sample-interval
values needed to produce the rate you want.
status = DAQ_Rate(RATE, 0, &timebase, &sampleInterval);
if (status < 0 )
sFunctionName = "DAQ_Rate";
goto TidyUp;
// Setup scan
status = SCAN_Setup (deviceNumber, numChans, chanVector, gainVector)
Initializes circuitry for a scanned data acquisition operation.
Initialization includes storing a table of the channel sequence
and gain setting for each channel to be digitized
status = SCAN_Setup(DEVICE, 1, ai_channels, gain);
if (status < 0 )
sFunctionName = "SCAN_Setup";
goto TidyUp;
status = SCAN_Start (deviceNumber, buffer, count, sampTimebase,
sampInterval, scanTimebase, scanInterval)
Initiates a multiple-channel scanned data acquisition operation,
with or without interval scanning, and stores its input in an array
status = SCAN_Start(DEVICE, ai_buffer, OUTPUT_POINTS, timebase, sampleInterval, timebase, 1000);
if (status < 0 )
sFunctionName = "SCAN_Start";
goto TidyUp;
while(count < local_ITERATIONS)
// Check whether we are ready to input another half-buffer
status = DAQ_DB_HalfReady(DEVICE, &ready, &stopped);
if (status < 0 )
sFunctionName = "DAQ_DB_HalfReady";
goto TidyUp;
if (ready == 1)
status = DAQ_DB_Transfer(DEVICE, ai_buffer, &points, &stopped);
if (status < 0 )
sFunctionName = "DAQ_DB_Transfer";
goto TidyUp;
count++;
// Clear the analog input
status = DAQ_Clear (deviceNumber)
Cancels the current DAQ operation
(both single-channel and multiple-channel scanned) and reinitializes the DAQ circuitry.
status = DAQ_Clear(DEVICE);
if (status < 0 )
sFunctionName = "DAQ_Clear";
goto TidyUp;
status = SCAN_Demux (buffer, count, numChans, numMuxBrds)
Rearranges, or demultiplexes, data acquired by a SCAN operation
into row-major order, that is, each row of the array holding the
data corresponds to a scanned channel
status = SCAN_Demux(ai_buffer, OUTPUT_POINTS * 2, 2, 0);
if (status < 0 )
sFunctionName = "SCAN_Demux";
goto TidyUp;
//Convert binary values to voltages (Doesn't actually take a reading from board)
status = DAQ_VScale (deviceNumber, chan, gain, gainAdjust, offset, count, binArray, voltArray)
Converts the values of an array of acquired binary data and the gain setting for that data
to actual input voltages measured.
status = DAQ_VScale (1, 0, 1, 1.0, 0.0, OUTPUT_POINTS , ai_buffer, volt);
if (status < 0 )
sFunctionName = "DAQ_VScale";
goto TidyUp;

Hello,
Please take a look at lots of examples available at :
1. www.ni.com >> NI Developer Zone >> Development Library >> Measurement Hardware
2. C:\program files\national instruments\ni-daq\examples\visualc
Sincerely,
Sastry V.
Applications Engineer
National Instruments

How do I reinstall the driver software for my iphone 3gs to my PC?

Hi there,
I accidentally deleted the driver software for my iPhone 3GS and don't know how to get it back.
My computer is a Windows Vista and I can still sync to iTunes and sync music and photos etc. But I want to use internet tethering for an internet connection on my computer which I have done previously. One day I was mucking around with the tethering and I accidentally deleted my iPhone from the computer. I went to reinstall it and and it searched for the driver software which it could not find on my computer, after this it asked for a disc so it could search for the software on that. My phone never came with a disc originally and I didn't have this problem when I first got my iPhone and initially installed it. So I chose the option that I didn't have a disc, the next options are to browse manually or search for another option and both of those failed (I chose a manual locotion on the computer where I thought it might be which was: (C:)/Program Files/Common Files/Apple/Mobile Device Support/Drivers, but this didn't work.) The computer still recognises my phone and all it just needs to install it.
I would be pleased if I could get any sort of reply guys.

Probably only way is to call Applecare in your country and they may tell you who holds the lock. IIRC you IMEI and serial # are required

Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

The wacom site will have the drivers for you.
http://us.wacom.com/en/support/drivers

Photosmart P1100 non-driver software

Similar Messages

Maybe you are looking for