Photosmart Plus b209 - won't see networks, won't run WPS, wireless light ON

Hello.
So I've had a Photosmart Plus b209 for the past three years. Never had a problem. Suddenly I switch my router to a Linksys e2500 and everything stops working.
I've printed network tests; my printer has no IP address, even when I revert to factory settings. Though the printout tests indicate the printer can "see" my network, I am not able to get it to detect it via the touch-screen menu. WPS also refuses to work, either prompting an error message or a time-out. The wireless light has been on this whole time.
I'm on a Mac, running OS X 10.8 (Mountain Lion). I'm starting to get very frustrated. What can I do?

Status of the blue wireless light on the printer, on, off blinking? Verified you are connected to your SSID with correct password? What is the IP of the printer?
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

Photosmart plus b209-a passes all diagnostics, sends files to printer- but never prints them

I have a photosmart plus b209-a set up on our wireless network. we love it when it works. But the problem is that even though it will pass all diagnostics- whether tools installed on the computer or using the online tests- it still won't print. I've gone through the network utilities and the printer diagnostics and they both say all clear, but both times when I tell it to print a test page nothing comes out.
I have opened the document que when sending files to the printer, and the file will pop up for about half a second then disappear, and it won't print. I have turned the printer on and off with no change.
Now the really confusing thing- this only happens about 60% of the time. As I write this post, I have been trying to print from my computer on the network without success. My wife just tried on her computer, and it is printing for her. Sometimes it's the other way around and mine will print and hers won't. It's not an ink thing or that my computer isn't on the network- as I've said the diagnostic utility shows the printer online and ready to use, it just won't print the thing.

good questions-
nothing between my computers and the router, they and the printer are about 15 feet from the router.
Neither computers are upgrades of vista- one is XP sp3, the other is win7 home.
All utilities ran say the signal strength is good, and both computers will sometimes print and sometimes not, then after a reboot of the printer it will be a new situation with each one- changes all the time.
Thanks for looking into this with me- I appreciate the help!

Photosmart Plus B209 printout doesn't match screen

I always have a problem when printing out images with my HP Photosmart Plus B209 All in One. For instance, I make 2 in x 2 in images for passport photos. I create the images in a digital editing program in a 2x2 size and then drop them into MS Word for printout. On the screen, the picture size shows as 2 in x 2 in, but when I print it out, the picture is closer to 2 1/16 inches x 2 1/16 inches. And if I print a borderless 8.5 in x 11 in and the image has a frame, often either one of the sides or the bottom of the frame is cut off some. I have tried Scaling, Not Scaling, Fit Image to Page, Print 100%. I also have this problem with Microsoft Publisher when printing a banner. Although the Print Preview shows perfect alignment, when I print them out they don't quite match. Does anyone know what I might be able to do to fix this problem? I always do a scan and alignment when I change my cartridges and the quality of the print is great, but it just doesn't seem to print at the right size. It's not off by much, but enough to ruin the effect of certain images. I'd appreciate any feedback that someone can give me on this. Thanks so much.

Page 7 of the manual only references WPA and not WPA2. I did search the manual for mention of WPA2 and did not find any. This indicates it does not support WPA2, so this could be an issue. However, this typically does not prevent the printer from seeing the network but only connecting to it.
While the wireless radio is more than likely functioning, it may be best to confirm it is working since it is not seeing the SSID. Go to setup>network> wireless network test.
Does it show anything as failed? If so, what items are marked?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Connect hp photosmart plus b209 printer to verizon fios wireless router

Having trouble connecting HP Photosmart Plus B209 printer to verizon fios wireless router in order to access printer via home wireless network. The WPS (push button) connection option is not available on the current software version of router (VERIZON M1424WR rev.1 (Mfg. ACTIONTEC)). So, need to know how to connect via the PIN option.
Normally, to connect a wireless device (like this HP printer) to the network, the device would input the router's security pin (e.g. WEP key). But I can't figure out how to input the router's WEP key via the printers face screen. And, after talking to Verizon, there is no provision to enter the printer's pin within the router's control setup online.
Any suggestions? Thanks.

This may help: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02986958&cc=us&dlc=en&lc=en#N1042
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Wireless printing via HP Photosmart Plus B209

Hey all,
Thanks for your help in advance. I am using an HP Photosmart Plus B209 series all in-one printer. The opperating systems in use are Windows 7 (64-bit) With my Dell laptop I am unable to use this printer as the default and print wirelessly. I can, however, print wirelessly via my Acer laptop with no problems. The error that shows up with the Dell laptop is that there is an error in the printing network. The printer is visible though through the internet on that computer. Here is another dosey for ya. I AM able to print from the Dell laptop using the printer through the shared network with the Acer computer. This is okay however a hassel to have to have to laptops on just to print wirelessly from the Dell laptop. I have uninstalled and reinstalled the servers from the HP web site a couple of times and nothing yet. I have also tried the various updates and no positive outcomes have occured. If anyone has any suggestions or knows exactly what I need to do that would be great!! Thanks again.
Sincerely,
Moose023

Give this utility a try:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02114788&cc=us&dlc=en&lc=en&product=3777182&tmp...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Photosmart plus b209a-m with osx 10.8.4 not recognize wireless

I had photosmart plus b209a printer with my macbook pro. It has wireless, but I have no idea how to set up it? I didn't install the cd, because I found out I just plug in the usb with my macbook pro will print it. Do I need to install cd first, but I lost it long time ago. Where I can get it or download it. I did search the driver for this printer in hp.com, but it didn't show any thing for me to download, can I set up wireless without install cd? Thanks.

Hi,
You need to install the driver to be able to setup the printer wireless by following the steps
Click the link below and follow the instruction.
you have not mentioned the mac os version to provide you more precise instruction
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02911238&cc=us&dlc=en&lc=en&os=4114&product=377...=
I work for HP but my posts and replies are my own.
Click the Kudos star as a way to say "thank you" for helpful posts.
Be sure to come back and click the 'Accept as Solution' button on the post that solved your issue - it may help someone else .....

My iPhone Won't See Networks

Ok I have a really weird situation. I have a brand new iPhone 4 8gb iOS 6.1.2 and it won't see WiFi networks. It'll load for one second, then it'll just stop and say "other." The weird part is that it connected to the WiFi in the AT&T store. And it also connects if I'm right next to the router. But if i move out of the room it goes away. All the devices in my house can connect to the WiFi in any room except for my last two phones. I know it's not my WiFi because this happens everywhere else too. I would really appreciate support! :)

Well, I noticed in the OP
And it also connects if I'm right next to the router. But if i move out of the room it goes away.

Photosmart Plus B209 loosing connection

I just purchased a new Photosmart Plus printer and love it except for one problem. It seems to loose its connection with the network when it goes into sleep mode. It is connected over the wireless network to 2 XP computers hardwired to the router and 1 Win. 7 laptop. They all work fine until the printer goes to sleep. If you cycle the power button on the printer everything is fine until it goes to sleep again.
Thanks for any help
Neal
Thank You,
Neal

Did you find a solution to this?
I've had this printer for a few months now and I have no complaints except for this sleeping issue. I basically have to go downstairs, unplug it, and plug it back in to get it to work again.
I have a Linksys/Cisco wireless G router. It is set for WPA2. Hosts on the network use DHCP, but the printer is set with a static IP. This setup works for a while, but eventually goes to sleep and I cannot get it to wake without doing the power cycle. I have also set the printer to not to go into sleep mode. No avail.
Hosts are laptops (only turned on when needed) that run Windows 7 Home Premium 64-bit.
Casey

Photosmart Plus B209 - Photo Black Ink Question

Hi I just brought the Photosmart Plus and notice that there are 2 types of black for this printer and only one slot on the printhead for the black ink. I am still using the starter black that came with the printer. So my question is if I want to print a photo, do I just switch the regular black out with the photo black and switch it back when finished printing the photo? or Should I finish the starter black first then switch to photo black. TIA!!
This question was solved.
View Solution.

Here's the link that Bob meant to post.
Link
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Photosmart Plus B209 Excessive Ink Consumption

My Photosmart Plus printer uses too much ink. I have had it 3 months and have printed very little. Yet, I have gone through 2 sets of 564 ink cartridges. It is almost out of ink again. It seems to use ink even when I haven't printed anything.
Is it possible that my printer is defective?
During that entire 3 months I have printed no more than 10 4x6 photos and perhaps 30 mixed text/web pages. I have never had a printer that used so much ink.

I have the C309 which uses the 564 cartridge. I am totally disgusted. I cannot afford this machine. I too, use it very little and it just runs out. I posted a question on how to make it run with just the one black XL cartridge full, with the others installed but empty. Am awaiting answer, but I think this model doesn't have that option.
If I can't afford this, although I have had HP for two decades of printers, I will be leaving for good and going to a Kodak model which claims to have little expense for ink.
Anyone have experience with Kodak? I will be sorry to leave HP, but they have gotten greedy if this machine is any example. It's a shame because it is a darn good machine. HP needs to lower the prices for ink for this ink hog or it's bye-bye for good. After this experience, I would be afraid to buy another hog.

Time Machine won't see network HD anymore

Time Machine has been working well backing up the MacBook Pro over WIFI to an external Firewire drive hardwired to the iMac. The iMac is backed up to a separate partition on the same external HD. After rashley changing MacBook passwords for Keychain and login (separately, then making them the same when I saw what a mess I made) the TM backups started failing on the MacBook, but were fine on the iMac.
I opened TM Preferences and unselected the network HD as the backup drive, intending to reselect again and start over. The network drive disappeared from the TM selection list and I cannot get it back. I can see the backup drive on the network and open it from the MacBook, but TM will not see it and put it on the list. I have tried reformating the partition, trashing the TM plist, checking all the network and user settings with no success.
Anybody got more things to try? I may try moving the external HD from the iMac to the Airport Extreme, but would rather not.

I was able to backup with TM by direct connection to the external HD. I reinstalled 10.9.1 but this had no effect on the problem of not being able to backup with TM over the WIFI network.
I moved the HD from Firewire connection to the iMac to USB connection to the Airport Extreme. This seems to be a work around for me since both computers appear to be successfully backing up now. I don't like it because now I can't backup Bootcamp on the iMac due to the restrictions Windows places on network backups.

Photosmart plus B209 cannot find Wireless (wifi) Network

Hello
I had an upgrade to my wifi network (faster speed package) which made the computers happy but stuffed my printer. It cannot be seen on the network and it cannot find a network. It works OK when connected with USB.
I am running Mac OS X 10.8.2, no updates outstanding.
Tried delete and reinstall on the mac
Tried reboots
I downloaded and ran the HewlettPackardPrint2.12.dmg file to ensure I had the right drivers
Using a CISCO DPC2935 router
Read every help post I could find but to no avail
Tried the WPS setup but the printer timed out (and I had clicked the WPS button on the router yes)
Tried running the original wifi setup software provided but it showed the printer trying to use my old wifi network and could not see any network for me to change that - guessing that bit of software no longer works with Mac 10.8. My computer i was running that from was happily connected to the wifi network in question
All help appreciated.

See if this helps.
Printer does not maintain wireless connection.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&tmp_task=solveCategory&cc=us&dlc=en&la...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP Photosmart Plus B209 a-m -Work VPN & Home Wireless Network

Hi,
I'm hoping someone can help me with an issue I'm having with my HP B209am. I'm trying to print wireless from my laptop but it seems when I'm connected to the my work VPN, it can't find the printer. Does anyone know how to correct this issue? Once I disconnect from the work VPN, I can print without any issues.
Thanks

Hi,
This is an expected behaviour.
Follow the Causes section below:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02790693&lc=en&product=3777182&tmp...
You may check with your local IT for any applicable VPN setting as VPN tunneling, this is only related with your network structure and many VPNs does not provide such functionality... in most cases you will have to disconnect from any VPN in order to use a local device as a printer.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Photosmart Plus B209 Printhead Problems

   I have the above printer, just over a year old. My ink was low, so I replaced it, it printed the alignment page, moved it up and scanned it, then it went to " The printhead installed is not intended for this printer or it may be damaged".
   I followed instructions for cleaning the specified areas- no luck. Unplugged it for 10 minutes and turned it back on- no luck. cleaned one more time- I Quit.
   Does anyone have a solution?
   Cost of a printhead?
   Cost of an office space aluminum bat?
No point in wasting my money for teleplone customer service, HP won't ship outside US/ Canada.
Thanks,
Phillip
"Staring at Kin Jong- Il"
This question was solved.
View Solution.

I would start by removing the ink cartridges, then remove the printhead and clean the gold contacts on the printhead and in the printer with a damp lint free tissue.
If the above does not help then Contact HP, they do have worldwide support.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

New Photosmart Plus B209 a-m Will not connect wirelessly **HELP**

I just purchased this printer and i have tried every option I can think of and find online to get this printer to connect to my netgear router, I had a wireless canon printer that i had for a while that quit so i went and bought this printer and now it wont connect i've never had this much trouble my canon connected right away. I changed my router settings and hit my WPS button for this printer and still nothing. When i click on the wireless option on the touchscreen menu on the printer it just says "No connection found" and the option on the solution center for USB to Wireless just runs and runs for hours. Any ideas? Thanks a bunch in advance!!

Hi- Cliff here.
I have the exact same printer. After I installed the software from the CD that came with the printer, I used the Wireless setup tab to configure my connection. You need to know about your network. Things like WEP, and most importantly- select the shared key if you use a 64 bit or 128 bit encryption. Mine would not work until I fixed the setup on the printer side of the wireless configuration. Type in your key (or passphrase) that's the same one you'd use on your laptop or desktop that is on the wireless network. Unless you have to- leave the settings to automatic on discovery of the IP address and DNS servers. You usually don't have to mess around with those on a home network. Make sure the printer is connected to the computer that you've installed the HP software on- with the USB cable when you start this process so the software can communicate with the printer. I used the "wizard" and after about 6 or 8 steps, I was able to remove the USB cable and put the printer downstairs. Then I simply used the Windows Vista "Add Device" for a printer on my network and Wahoo!!
I hope that helps. If not, write back to me and we can do a more detailed step by step overview.
I must say, once you get it all set up- it's a great printer and VERY inexpensive to operate. Ink is cheap and this printer is very fast over my network. I use my ACER Netbook all over the house and print from the garage and the front yard and the living room and even inside my RV!!
We will get it working.... Together....you are not alone in this.
Cliff Van Ness
Spokane, WA
What's the KUDOS thing for, I've seen other people mention it.
I'm new to the HP Website.
Thank you,
Peace and Safe Journeys

Photosmart Plus b209 - won't see networks, won't run WPS, wireless light ON

Similar Messages

Maybe you are looking for