Photosmart Prem C410 getting started connecting to web

How do I set up my printer so I can print from my laptop. wireless
Once I am set up how to go about sending a document to the printer.
Explain my printers email address, is this something new and not an existing email (i.e. google or yahoo account)
Once this address is set up can I change the email address and if so how.
Yes, I am new to wireless printing. Thanks for all the help you can give me.

Hi toratora,
Welcome to the HP Support forums. Don’t worry about being a wireless novice, we all were at one time. I’ll gladly help you with the steps to get your Photosmart C410 printer connected wirelessly. As for printing wirelessly it is the same steps as printing with a USB cable connection.
We need to first connect your printer to your wireless network. Please follow the steps in the Installing the Printer Software in Windows for a Wireless Network Connection document.
I have included a document titled Getting Started with ePrint. It answers your question about the printer’s email address in the section ‘What is ePrint?’ I have included the answer here as well.
To set up ePrint please start by following the steps in the Getting the Printer Claim Code document. Once you have the web services information sheet with your claim code please follow the steps in Setting Up a Custom Email Address for ePrint.
You should now be able to print wirelessly and email your printer.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

HP Photosmart Prem C410 Unable to print - not able to connect wireless

Initial setup of my HP Photosmart Prem c410 printer -- cannot connect to my wireless network. The password is good. There is no MAC address filtering on my wireless router. Help. ;-)
This question was solved.
View Solution.

OK, I figured it was a DSL router, but wanted to be sure.
DSL routers are rather non-standard, so we have to relieve them of some control during the printer installation:
1. Unplug the phone line to the router.
2. Restart the router by pulling its power plug out of the back momentarily, then plug back in.
3. Wait for the router to restart.
4. Install your printer, including software on your computer.
5. When the printer is installed and working, plug the phone line back in the router.
6. Restart the router again.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Can't install drivers for HP Photosmart Prem C410 series

OS = windows 7 SP1 64 bit.
Printer = HP Photosmart Prem C410 series.
Driver = PS_AIO_07_C410_FSW_Full_Win_EMEA_140_222-4
in the middle of the install i get the following error:
Fatal error during installation
"sameer.el-khal" is not a valid short file name
please go to http:// www.hp.com/support for troubleshooting information about "fatal error" and "MSI.netdevicemanager40"
Everything craps out from there ...
Got the same error running it general user and as administrator ...
Please help.

Hello @sqldraggon,
Welcome to the HP Support Forums! I see you are trying to install your HP Photosmart Premium C410 to your Computer running the Windows 7 Operating system.
I would like you to start troubleshooting here: A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
Please let me know the results, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How to print to my wireless all in one photosmart prem c410 when printer is not powered on?

how to print to my wireless all in one photosmart prem c410 when printer is not powered on?

Hi,
You cant print to a printer that you physicly turned off. Most network printer have a sleep mode, so leave it on and after a while it should go into a sleepmode. And should wake up when a printjob is being sent.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

How to Install, Configure and getting started with Hyperion Web Analyzer9

i have installed both
Hyperion Reporting and Analysis - System 9 Services Release 9.3.1 Microsoft Windows x86 Installer.
Hyperion Reporting and Analysis - System 9 UI Services Release 9.3.1 Microsoft Windows x86 Installer
Now tell me step by step on how to configure and how start Web analyzer
I dont know how to start server/services. (Any Web server required?)
Getting started would be more helpful.
Need help ASAP.
thanks,
Ram

Hi,
First of all have you installed Shared Services as you will need that as that foundation of the installation.
You will also need to install other components such as essbase if you intend to use it with web analysis.
If you have done that, then you will first need a repository to hold Reporting and Analysis information.
Afte start up the configuration utility and select the Reporting & analysis elements and go through the steps entering
details such as shared services connection, repository information.
It should install the components as a service.
You should really read the installation document :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hs_windows_install.pdf
Cheers
John
http://john-goodwin.blogspot.com/

How to disable "getting started with Firefox" web page when starting Foxfire?

Every time I open Firefox I get the additional web page "getting started with Firefox" and do not know how to disable it. Can you help?

The page may be set as an additional home page, the following link shows how to check and set your home pages - https://support.mozilla.com/kb/How+to+set+the+home+page

Getting started with a web service client

I am trying to figure out how to create a web service client using NetBeans 6. I started with a class library for testing in Fitnesse. I've been using tutorials and Googling around but now I am stuck. I have added the JAX-RPC library; I am able to add a web service client to the project using the IDE; and I can view all of the objects and methods under "Web Service References" and compile the code; however, at runtime I get the error:
java.lang.NoClassDefFoundError: javax/xml/rpc/Service
at java.lang.ClassLoader.defineClass1(Native Method) ... etc.
What am I missing?
P.S., when I try to test any web service in the IDE I get an error like this:
InvocationTargetException org.netbeans.modules.websvc.registry.ui.ReflectionHelper.callMethodWithParams(ReflectionHelper.java:540) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg.invokeMethod(TestWebServiceMethodDlg.java:466) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg.access$500(TestWebServiceMethodDlg.java:92) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg$3.run(TestWebServiceMethodDlg.java:409) org.openide.util.RequestProcessor$Task.run(RequestProcessor.java:561) org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:986) Next Exception Layer null sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) java.lang.reflect.Method.invoke(Method.java:597) org.netbeans.modules.websvc.registry.ui.ReflectionHelper.callMethodWithParams(ReflectionHelper.java:534) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg.invokeMethod(TestWebServiceMethodDlg.java:466) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg.access$500(TestWebServiceMethodDlg.java:92) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg$3.run(TestWebServiceMethodDlg.java:409) org.openide.util.RequestProcessor$Task.run(RequestProcessor.java:561) org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:986) Next Exception Layer Could not initialize class com.sun.xml.internal.messaging.saaj.soap.SAAJMetaFactoryImpl sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) java.lang.reflect.Constructor.newInstance(Constructor.java:513) java.lang.Class.newInstance0(Class.java:355) java.lang.Class.newInstance(Class.java:308) javax.xml.soap.FactoryFinder.newInstance(FactoryFinder.java:38) javax.xml.soap.FactoryFinder.find(FactoryFinder.java:165) javax.xml.soap.SAAJMetaFactory.getInstance(SAAJMetaFactory.java:61) javax.xml.soap.MessageFactory.newInstance(MessageFactory.java:127) javax.xml.soap.MessageFactory.newInstance(MessageFactory.java:93) com.sun.xml.rpc.soap.message.SOAPMessageContext.getMessageFactory(SOAPMessageContext.java:200) com.sun.xml.rpc.soap.message.SOAPMessageContext.createMessage(SOAPMessageContext.java:131) com.sun.xml.rpc.client.StreamingSenderState. (StreamingSenderState.java:30) com.sun.xml.rpc.client.StubBase._start(StubBase.java:92) webservice.CountCheatServiceSoap_Stub.letterSolutionsMin(CountCheatServiceSoap_Stub.java:54) webservice.CountCheatServiceClient.countcheatservicesoapLetterSolutionsMin(CountCheatServiceClient.java:26) sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) java.lang.reflect.Method.invoke(Method.java:597) org.netbeans.modules.websvc.registry.ui.ReflectionHelper.callMethodWithParams(ReflectionHelper.java:534) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg.invokeMethod(TestWebServiceMethodDlg.java:466) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg.access$500(TestWebServiceMethodDlg.java:92) org.netbeans.modules.websvc.registry.ui.TestWebServiceMethodDlg$3.run(TestWebServiceMethodDlg.java:409) org.openide.util.RequestProcessor$Task.run(RequestProcessor.java:561) org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:986)
Edited by: pjpark on Dec 26, 2007 1:33 PM

I was able to get the web service client to work in Windows XP by following the same steps I was using in Windows 2003 x64. I did not need to add anything to the Class Path in XP to run the test application and execute a web service method; however, NetBeans would not give me the option to test the web method from the IDE.
I will try re-installing java and netbeans on the 64 bit server and see if that helps.

How do I get Started with Dynamic Web Pages?

I am presently following Janine Warner's Dreamweaver CS3 video series. I noted that the Advanced part of this tutorial series focuses on Dynamic Web Pages, but only uses Cold Fusion. From what I can gather, CF costs around $1000, while PHP is free! My question is really this: in going from static to dynamic web design I'M A COMPLETE NEWBIE, so what do I need? I am doing some planning here -- I know it won't happen overnight.
(BTW: I was surprised to discover that CF is NOT included in my CS3 Master Collection). It might appear then that support for PHP is better than for CF?
Apparently, I need a server -- well, OK I have PCs to spare. Fast internet, I also have: Comcast standard -- 12MP
Now, I think I also need Apache -- which apparently runs on the server and does something.
So then I DL PHP, figure out how it works, and it will integrate with DW CS3 in some way.
Now, what have I missed? Is there some really basic, first-time-with-using-a-server place or tut I should go to or read? Before you ask: No, I'm doing all this myself on a shoestring budget.
Are there expensive hosting fees for dynamic web sites or other items I will run into? Can I just use a PC over my Comcast cable as the server run from my home? (Really high traffic is not anticipated)
All recommendations appreciated, thanks.
Thom

Many of these questions have already been answered in your thread in the Dreamweaver General Discussion forum, so I'll just stick to a few basics.
You need a server whichever server-side technology you choose, but "server" is not a physical machine, but a piece of software that you install on your development computer. You'll find details of how to install a PHP environment in the following article: http://www.adobe.com/devnet/dreamweaver/articles/setting_up_php.html.
Similar instructions are available for setting up a ColdFusion server at http://www.adobe.com/devnet/dreamweaver/articles/setting_up_coldfusion.html. The article is for ColdFusion 8, but ColdFusion 9 is installed in exactly the same way.
Hosting for PHP/MySQL is plentiful and relatively cheap. However, make sure the hosting company offers a minimum of PHP 5.2 and MySQL 5.1. Hosting for CF is harder to find and tends to be a bit more expensive, but not prohibitively so.

To get started , connect the camera

I purchased a hp pavillion laptop on 15 august 2014 . but it started giving problems such as slow speed and not enough performance which was promised . so basically i bought this laptop for video conferencing purpose but i started gettting a problem , the camera suddenly stopped working for a while . everytime when i strted my video conferencing the camera would suddenly stop n not work again , even the stock camera application didn't work. I went to the my hp service center but no satisfactory help was given .they asked me to buy the recovery disk , by calling at some toll free number 1800112267, although my laptop is in warranty . I feel very much harassed and frustrated. Kindly help me to overcome this problem

hi BassamMord,
Welcome to the Lenovo Forums.
It's possible that driver for the camera is not installed -- causing the Windows Camera app and Skype to show the camera error.
Can you try to:
1. Install the Integrated Camera Driver (reboot the system if necessary).
2. When finished, navigate to the Device Manager and look an item called imaging Devices -this will show and verify if the camera device is successfully instaled on the system.
If the camera is successfully detected, try opening Skype or the Windws Camera App. and observe.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HP Photosmart Prem C410 series will not print black

The old cartridge had ink left, but my pages hhad no black. I replaced with brand new cartridges, tried alignment, alignment failed multi times, went to default *#123 and had go thru iintialization all over agin, same results. Went in clean the print head sponge, and then took out all cartridges and put them back in several times,
I have tried to put it in BEST quality and print pages with black text only, text that is BOLD is very very faint like it is the photo black, no black ink at all, pages are blank. Printer has bene working great.
Any ideas?
Thanks

@Pixefinn- I would first do a manual cleaning of the contacts on the cartridges as shown here in solution 3 of this document. Sometimes buildup on the cartridges and the contacts inside the printhead can keep it from performing properly and also cause the machine to produce false error messages. After you have done the manual cleaning and have reinstalled the cartridges, I would run the printhead cleaning utility again.
If after you have completed that process, you find that you are still getting the error message, I would look at the document below. It will address the error message that you mentioned in your post and provide troubleshooting steps to try in an attempt to clear it from the printer.
Alignment Failed

HP Photosmart Prem C410 Series Driver Class Driver Printer Still In Word Drop Down

I have a printer that I no longer wish to use that will not remove itself completely from my system.
I've done all the necessary steps of removing it from the control panel.
I went to printers and devices and right clicked to remove the printer.
The printer still shows up in Microsoft Word with the message "Error - Delete - Offline - 6 documents waiting"
Some of the steps mentioned in the forum are not available to me such as going to "Print Management."
Please assist with this annoying issue.
This question was solved.
View Solution.

Hi,
That happens due to some documents stuck in the queue.
Reboot your PC and check if the printer icon disappears.
If it still exists, go to Devices and Printers, right click the printer and select See what's printing.
Click the top Printer menu and select Cancel all documents, then return to Devices and Printers and check if the printer disappeared.
Please let me know the results,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HT4623 how to get started connected with laptop with net connection but announcement is to try using wifi ,try again over mobile please help me

Sim card inserted in a new iphone 4s but iphone is not activated and announcing try using wi fi or try again over mobile please help?

You can only sync to one computer/iTunes library. To make this your syncing computer:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

HP Photosmart Prem, lost connection to my Mac, cannot reinstall

My printer stopped communicating with my Mac. I ended up deleting it and trying to reinstall it. But it won't install. I tried adding a new printer via the IP address and get as far as trying to configure it but get this error message:
Setting up 'HP Photosmart Prem C410 (HP....)' An error occurred while trying to add the selected printer client-error-not-possible.
HELP any body?

Hey there
I have some more ideas for you to try. Thanks for letting me know the results and also that the printer is working with your Windows PC, that helps quite a bit.
Download this printer update: HP Printer Drivers v3.0 for OS X
Try this again: Repair disk permissions
Try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer.
Re-add the printer and try using the Bonjour protocol, this post from @Sunshyn2005 has the proper screen shot to help you: Re: imac drops off once I connect iPad
That should work some magic and do the trick. Please let me know the outcome
Happy Tuesday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Adobe PSE9 won't recognize HP Photosmart Premium C410 Printer

My HP Photosmart Premium C410 works with all my applications except Photoshop Elements 9 - which is kind of handy for an imaging program!! The printer is definitely correctly selected, as verified from Control Panel - Printers and Faxes. In PSE, under "Print", the first item is "Select Printer". I have selected "HP Photosmart Prem C410 series", which is the second line in the option list. The first line is very similar, being "HP Photosmart Prem C410 series fax". Every time I try to print something, it starts the fax process..... Nothing I try seems to get it onto the printer, rather than the fax. Any advice gratefully received.

Hello,
PSE9 takes some initial number of character to recognize a printer and send print action to the printer.
In your case both your printer and Fax has same initial name, in such situation PSE get confused. In such situation to come over of this issue do one thing :-
Rename your printer name to some otehr name and then try printing.
For more reference you can go through this post also :-
http://forums.adobe.com/message/3272408
cheers
Sam

Adobe Photoshop Elements 9 won't recognize HP Photosmart Premium C410

My HP Photosmart Premium C410 works with all my applications except Adobe Photoshop Elements 9 - which is great for an imaging program!! The printer is defintely selected as default. However, there are two options avilable on the "print" page of PSE and they are very similar - perhaps indicating an issue. The first on the drop-down is "HP Photosmart Prem C410 series fax", while the second (which I have selected) is "HP Photosmart prem C410 series". Every time I try to print from PSE, it starts up the fax process.....!! Anyone any ideas - all advice gratefully received.
This question was solved.
View Solution.

Kellerrolf,
Please try to rename the "HP Photosmart Premium C410 series Fax" to "PS C410 Fax". You can change it by:
Open "Printers"
Right click the HP Photosmart Premium C410 series Fax and selecting rename
If it still is loading the fax when you printer there are few more steps that we can try.
Andrew
Please know that I work for HP but my posts and replies are my own.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Photosmart Prem C410 getting started connecting to web

Similar Messages

Maybe you are looking for