Photosmart printer D110A CN732A How do I solve a port match problem?

operating system: windows 7
Error message: port match
Any changes made to your system before the issue: No
When I go to print something It tells me it's printing, but then never does. The explanation is always just the simple "error". I've used troubleshoot, re-started everything and ran the diagnostic test which told me it was a port match problem. My printer will still copy.

Hi there,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

  • HP Photosmart Printer D110a on install, can't get pass error message

    As stated: HP Photosmart printer D110a with wireless ability. Keep getting error message on reinstall software &
    drives. Still have yellow triangl on printer icon Help Thanks
    Not all that smart on computers, keep it at ground level.

    Hello there! Welcome to the forums @203Fra-Jer ,
    I read about the installation error you are faced with when trying to install your Photosmart D110a model. I will do my best to help!
    Please first respond with which operating system you are running on the computer you're installing the printer on and I will do some research for you.
    Which Windows Operating System am I running?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Thank you!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Photosmart printer D110a, product No. CN733A

    I am very frustrated.  I have an HP Photosmart printer D110a, prod. no. CN733A thta works great in every way except I can't figure out how to scan a document with OCR and transfer it to a word document.  I used the Help menue; but it is useless.  It tell me to "scan to File" and save as a "Text, RtF or HTML" and none of these (test,RTF or HTML) are available.
    Can you give me step by step directions on how to scan using OCR with my D110a software?  I am really frustrated with the help section of the software.
    Gale

    Hi GRBrown,
    Currently the most PhotoSmart printers do not come with OCR software.  Click here for a link to an OCR download that may help you.  (D110 is not on the list but it should work)  After it is installed "Scan using OCR" will be a option when scanning.  Hope this works for you. 
    Although I am an HP employee, I am speaking for myself and not for HP
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accept as Solution"

  • How can I solve the Error 110 problem when trying to modify the Description of Properties of PDF?

    Hello!
    I am trying to modify the Description of the PDF fies but I cannot do for some files because of the Error 110.  How can I solve this problem so I can succesfully modify the Description of the Properties of the PDF files?
    I also have one more question!
    Why is it impossible to modify the Description parts when the File name is missing in the Description?  There is a File name on each individual PDFs but some of them have to File names on the Description!
    Thank you very much in advance!

    Noelia, i have the same problem, did you solved it ?I had the same issue as Noelia when I investigated Noelia's issue originally (see the TwoVideos sample application in this thread: Re: How can I play different videos with only one MediaPlayer?
    I tried running the TwoVideos sample application today on Windows XPsp3, JavaFX 2.1b17, JDK7u4ea and I was unable to reproduce the problem, so it is likely fixed either 2.1 or (less likely I believe) a Windows 7 only related issue.
    http://www.oracle.com/technetwork/java/javafx/downloads/devpreview-1429449.html
    If you can reproduce the issue with the latest developer preview, then log a bug at http://javafx-jira.kenai.com with environment details, steps, sample media and code to reproduce the issue.
    Please contact me ainchilc at gmail dot com.If it is an answer to an unanswered question on a public forum, it is best to post the answer on the forum, then everybody who reads the forum will know what the answer is.

  • How do i solve the silverlight installation problems

    How do I solve the Sliverlight installation issues on my new Macbook pro?

    What exactly is the installation issue?
    Uninstall Silverlight: https://www.microsoft.com/getsilverlight/get-started/install/removing-silverligh t-mac.aspx
    Reinstall Silverlight: https://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx
    Sometimes you may need to repair permissions and users permissions on the machine.
    See #6 and #11 here
    ..Step by Step to fix your Mac
    If your having trouble with the installation process, it's sort of the same procedure to install Flash
    How to install/uninstall Flash, fix problems
    Installing software from the web is a bit more difficult than from AppStore.
    Microsoft Silverlight should be approved through Gatekeeper, so having to control or right click on the installer to select "Open" to bypass Gatekeeper shouldn't be required.
    If this is occuring, like it's saying this app can't be installed as it's not from MacAppStore or a Apple Identified Developer, then it's likely not the real Silverlight but a trojan malware.
    Please use the links I've provided to install Silverlight as they are direct to Microsoft.

  • Any way of finding out how Apple will solve the Aperture / ACR problem?

    Has anyone out there gotten any comments from Apple support or other people "in the know" about how Apple is going to solve the Aperture / ACR problem, and any potential time frame?
    Of course, Apple is going to work on problems with its own RAW conversion; that goes without saying. But does anyone have any knowledge of whether Apple is going to open up the ability for Apple to send RAW, unconverted images to Photoshop, so that ACR can handle them?
    I think knowing this now is pretty crucial. I am willing to live with the pain Aperture is going to impose on my workflow, in exchange for the file organization benefits it provides, IF I know that I'll be able to use Aperture with ACR soon (near term). But if Apple is going to just tinker with the RAW converter, and not attempt to send RAW files to ACR, then as someone else posted in another topic, this could be a long wait, and other companies have taken years to hone their RAW converters.
    This is kind of my last-ditch effort to keep Aperture around, and build my workflow around it. If I know that within a month or two at the most, I'll be able to be using ACR directly when editing new versions, then I'll absorb the pain until then. But if I am looking at waiting six months for it (several man years), or riding out the process of Apple trying to get their own converter fixed, then as much as I don't want to, Aperture is going to get returned or hit eBay.
    Does anyone have any idea on this? I've held up my projects for the past week trying to reorganize my workflow to work with Aperture, and I've got to pound the gavel, make a decision, and pursue a direction. Knowing what direction Apple is going to take with this makes all the difference in the world in what I do.
    Thanks in advance for any info you can pass on.
    Brad
    Powerbook G4-1.33GHz-17" / Powermac G4-1.4GHz   Mac OS X (10.4.2)   PB: 1GB RAM, Radeon 9600-64MB / PM: 1.25GB RAM, Radeon 9000Pro-128MB

    This "Open External Editor from Master NEF", versus open from a dynamicaly created version is, I have decided, crucial.
    I am getting less clumsy with the interface, but I simply can not get all white balance, and noise reduction done on my best available light shots.
    ACR in CS2, and a subsequent "Neat Image" scrubbing is excellent for this.
    The automatic association within a stack, of the resulting flattened file would be a big difference. I agree a formal statement from Apple would make me more inclined to really commit to Aperture for all my work.
    Going one step further, it would be nice to keep the layers on the round-trip Master file, even if you would work with a dynamicaly created version of the returned "master" within a stack. It would occupy more disk space, but would do so only for those images where the user has made a quality decision.
    Michael
    Powermac G5 dual 2GHZ, 2.5GB - 2x20in   Mac OS X (10.3.4)  

  • My printer hp deskjet 1510 showing cartridge or print head error. how can i solve this?

    replaced the cartridge with hp 802 genuine cartridge, reinstalled the software, cleaned the cartrge head but problem not solved 

    Hello Phillips1,
    Deskjet F4400 printer is support only USB Connection.
    You'll need to have the printer connected to computer using USB cable.
    It is not a Network Printer.
    Regards,
    Jabzi
    Help the community by marking this post .
    Was your question answered? Mark it as an Accepted Solution!
    See a great post? Give it a Kudos!
    I work for HP
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • How do I solve iMac "Bluetooth: Unavailable" problem?

    I have a 27-inch, Mid 2011 iMac (OS X Lion 10.7.5) which was provided with a wireless keyboard and mouse.  Afer a year of use, I started having intermittent problems with the keyboard becoming disconnected, but the problem usually solved itself after a few seconds.  Now, I am not able to use the wireless keyboard and mouse at all.  I installed new batteries in both the keyboard and mouse, however, it did not solve the problem.  The Bluetooth icon at the top right of the monitor reads "Bluetooth: Unavailable" in light gray lettering.  I am currently typing this with a wired keyboard and wired mouse.  I cannot find any solutions in the Apple Support section.  How can this problem be solved?

    Try resetting the SMC.
    Barry

  • How can I solve my photo frame problem?

    Thought I would give this forum a try regarding non-Apple hardware... I have a Coby DP-882 digital picture frame with a SanDisk 2GB card. After connecting the frame via USB, I get the disk reader icon on the desktop. I then just drag the photos there and it loads the frame. I can load about 50MB of digital photo jpegs (using GraphicConverter's browser) when I am prompted that the disk is full. I always make sure the card is cleared before I start and the pane tells me I've got 1.85GB available. My images are only about 500kbs each and I have a total of 400MB to load; should be no problem. I have tried an SD 256MB card to test, same result. Any ideas would be helpful. Thanks!

    Even forum #1 Old Toad had trouble writing to a card for a photo frame. See this thread: http://discussions.apple.com/thread.jspa?messageID=4336916
    You might try adding one photo at a time, like he did, and see if it will work.
    You said you were doing this through Graphic Converter's browser. Is it the same result if you just use the Finder?
    FWIW, I was able to copy about 587 MB of photos to a 1 GB card that already contained 176 MB. The card had been formatted in a camera (not even the same make as my own camera), and I added my pictures to the existing folder structure - to the same folder containing the other photos. It just worked. This leads to the question: How do you format the card for use in the photo frame? Could the card format have to do with the difficulty in writing to it?
    Please let us know if you get an answer from the Coby support guy. You could help a lot of people with this same problem.

  • How do I solve this distinct count problem?

    Hello experts,
      So, I have an OBI report (table view).  I needed to get the percentage difference btn 2 columns, I did. Then I had to summarize difference in 4 buckets (0-15, 16-30, 31-50, >50%); I did (case statement). NOW,  I need to summarize(distinct count) the above buckets based on Store numbers for each day.
    Basically, if the difference is btn(0-5%) and I have 5 stores then I need to see 5 stores separately. The problem I am having when I do the distinct count instead of having separate counts for each bucket I am getting the total.  I see the buckets summarized, but the store column is showing the total number of all(we have about 700 stores) instead of breaking down the count for each bucket.  In the stores column I am using the distinct count function, I don't know if the problem is here or the case statement for buckets. I don't know either OBIEE is able to do what I trying to do, since I have yet to do this kind of function.  I have gotten few leads on my first post,  so far none of them have worked.
    As always, your insights are highly appreciated,

    Instead of using Distinct Count in Aggregation Rule,Try using in Column Formula.
    Let me know if u need any help on this.
    Thanks,

  • How do I solve my color profile problem?

    When I load photoshop cc I get a message 'The monitor profile 'Samsung Natural Color Pro 1.0 ICM' appears to be defective. Please rerun your monitor calibration software'. The monitor is a Samsung Syncmaster 2032BW which worked fine with my previous cs3 version of Photoshop. There doesn't appear to be any updates either for the 2032BW monitor on the Samsung site. Any help or suggestions would be very much appreciated.
    Message was edited by: dhubz

    I will post some screen shots later.
    I have tried the iTunes username and password but it does not accept these. 
    It is apparently a well known problem in the UK and Apple are also aware of it although they aren't doing much about it - apparently there is to be a 'fix' in the next update?  Not sure, in the meantime, I've been unable to connect to my home broadband for 4months! 
    As I said, none of my other devices, iPod Touch/MacBook/iPad, have this problem.  Just the iPhone 5.
    Thank you for your comments so far...screen shots to follow later.

  • How do I solve my wifi connection problem on iPhone5?

    I am not able to connect (AT ALL) to my home broadband wifi.  I have no problems with any other devices other than my iPhone5.  On connection, it asks me for an apple username and password from www.apple.com (that is not the same as my itune username and password).  It then tells me that log in has failed and reverts to a strange peach coloured screen with an announcement that I'm not authorised!
    Any advice would be grately received.
    Thank you.

    I will post some screen shots later.
    I have tried the iTunes username and password but it does not accept these. 
    It is apparently a well known problem in the UK and Apple are also aware of it although they aren't doing much about it - apparently there is to be a 'fix' in the next update?  Not sure, in the meantime, I've been unable to connect to my home broadband for 4months! 
    As I said, none of my other devices, iPod Touch/MacBook/iPad, have this problem.  Just the iPhone 5.
    Thank you for your comments so far...screen shots to follow later.

  • How can i solve my upside down problem in main screen in iPhone 6 Plus 128gb

    i have a upside down problem in my iPhone 6 plus 128gb . When i wake up the phone, in the main window all apps are seen in upside down position. and you can not fix it without opening the phone again. i have searched the internet about this problem and i have seen that lots of users have the same problem too.
    i restored and reset all settings of my phone but nothing has changed. i want help from apple world....

    Is the portrait lock on control panel off or on Is the lock switch on side of iphone off or on Have you tried this press & hold power button & menu button hold both down Until you see Apple Logo you wil not lose any data. If all the things do not work take iphone Back to Apple Shop or the shop where you bought the iPhone. Bsydduk

  • Solved my iTunes Match problems on iOS 7

    I updated both my iPhone 4S and iPad (3rd gen Retina) to iOS7 on Sept 19. I use iTunes Match, and observed 3 different issues:
    Some songs on my iPhone wouldn't play
    Some album artwork on my iPhone wouldn't appear
    Radio option didn't appear on the iPad
    All are solved, so I am sharing what I did. I have an iTunes Match library of about 22,000 songs.
    iPhone: I tried turning iTunes Match on an off to no avail. I then set the Music to NOT "Show All Music", and observed that I had several hundred songs loaded in the Music app, some of which were songs that were giving me grief by not playing. Wishing to start fresh, I went to Settings - Usage and looked for the Music app in order to delete all local files. It was not there! This told me that the OS incorrectly thought there was no local music - a database error. But how to delete a database that the system won't acknowledge?
    So I went to the iTunes Store and downloaded a previously purchased album. Going back into Settings - Usage, the Music app now appeared, showing the total file size for the newly downloaded album. I deleted all music from the app, and it worked - the Music app was empty. I turned iTunes Match back ON and poof! Everything loaded back in and after a while all my album artwork was back, and all songs played normally, whether locally stored or streamed. Problem solved by finding a way to completely delete the music database and start over.
    iPad: No radio, soap. Sorry, I couldn't help that bad joke.
    The Music app on the iPad did not have a Radio button. I forced the iPad to restart (hold Home and Screen Lock buttons together for 5 seconds) and when I restarted Music, Radio appeared for a second and then disappeared (!!). I quit Music and restarted it. The Radio button appeared and I quickly hit it, which brought me to the "get started" screen for Radio. Problem solved by repeated restarts (which probably cleared some temp data, allowing the button to appear).
    I don't know if either of these will help others, but if so then great!
    P.S. - the rest of iOS 7 is working very well on both devices, no complaints worth noting. Nice new stuff.

    iPhone5 and iPad 3 both suffering from "Loading iTunes Match..." message forever.
    Can't do anything. 
    Personally, I think the Apple Keynotes/Events should be done on launch day so they can feel our pain and suffering.  Imagine them standing up there trying to launch the new Music app and getting stuck on this.
    Pathetic.  What's worse is that the 5S and 5C come out Friday, so that's a billion more people setting up new phones and hitting the match and music and app servers. 
    It'll probably be a week before things start to settle down. 

  • How to check UC560 FXO Port Not Problem Question

    Dear All,
    We are newbie on Cisco UC560.
    Our customer use Cisco UC560, ESW-520-24P and Cisco SPA 502G and 508G for their branch office replace old traditional PBX. Cisco UC560 have built-in VIC2-4FXO and VIC2-4FXS.
    Our customer PSTN line connected to UC560 FXO port (1 line PSTN).
    We receive report from our customer that they cannot make a call to PSTN and receive call from PSTN that connected to UC560 FXO port (on physical FXO port LED Green turn on).  When the problem happen our customer has restart UC560 or shutdown FXO port from CLI.
    We have do some test to our customer UC560.
    - Moving PSTN line to another FXO port (example: port from 0/1/0 to 0/1/1). The result is same (cannot make call to PSTN and receive call from PSTN)
    Today, We have checked on our customer UC560 via show voice port summary and found that port0/1/2 and 0/1/3 OPER status is up wihout cable connected to this port.
    Our question:
    - What command on UC560 to make sure FXO port on UC560 doesn't have problem?
    We attach:
    show tech-support voice
    show tech-support
    We hope you can give us information about this.
    Thanks For Your Attention

    Hi There,
    If you cannot find the Indonesian "Disconnect Supervision" you may get away with using Singapores "Disconnect Supervision" as your carrier networks are similar to each other
    Cheers,
    David Trad.

Maybe you are looking for