Photosmart7260 not printing 2colors in print test did printer head cleaner new ink and aligned HELP!

Since these two colors light magenta and magenta are not printing naturally the pictures look awful! everything else shows ok except the print quality pattern which is where the colors do not show

Hi,
Since you have tried cleaning and aligning with no result, I think this is a HW issue. Please contact HP support ASAP so that if its a HW issue they can replace the printer for you.

Similar Messages

  • I am using Firefox 23.1 all of a sudden images are not displayed, I have started in safe mode, installed a new version and nothing help

    I have tried everything from re-installing FF 32.1
    restarting is safe mode
    re-examined all extensions to see if any could be cause it and disabled some and nothing.
    I will NOT go higher than 23 as I have many more problems when I was in those
    I have a mac. ...10.8.5

    If images are missing then check that you do not block images from some domains.
    *Tap the Alt key or press F10 to show the Menu Bar
    Check the permissions for the domain in the currently selected tab in "Tools > Page Info > Permissions"
    Check "Tools > Page Info > Media" for blocked images
    *Select the first image link and use the cursor Down key to scroll through the list.
    *If an image in the list is grayed and "<i>Block Images from...</i>" has a checkmark then remove this checkmark to unblock images from this domain.
    Make sure that you do not block (third-party) images, the <b>permissions.default.image</b> pref on the <b>about:config</b> page should be 1.
    Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
    Make sure that you allow pages to choose their own colors.
    *Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    Note that these settings affect background images.
    See also:
    *http://kb.mozillazine.org/Website_colors_are_wrong
    There are extensions like Adblock Plus (Firefox/Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images and other content.
    See also:
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    *http://kb.mozillazine.org/Websites_look_wrong

  • Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I d

    Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I do have it listed in my Firewall as an exception program with Permit All. What is happening?
    == This happened ==
    Every time Firefox opened
    == After removing Firefox and Reinstalling it. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; MS-RTC LM 8)

    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

  • How do i update my camera raw? I can not find the download update I've just brought a new d4s and I'm using the iMac with cs6 version. PLEASE HELP..

    How do i update my camera raw? I can not find the download update I've just brought a new d4s and I'm using the iMac with cs6 version. PLEASE HELP..

    The Adobe auto updater is pretty decent in CS6.  Just go to the Photoshop Help menu > Updates.
    You will be able to update ACR, Photoshop and Bridge right there, if there are in fact updates available.

  • All non-Apple apps will not open on my phone. I restored as a new phone and still will not work

    All non-Apple apps will not open on my phone. I restored as a new phone and still will not work

    Hello there, KScotty.
    The following Knowledge Base article offers up some great steps for troubleshooting apps installed on your iOS device:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I have up dated my itune and now it will not play my old purchase movies. I have brought new ones and they work but my old purchases will not. Why and how can I fix it.

    I have up dated my itune and now it will not play my old purchase movies. I have brought new ones and they work but my old purchases will not. Why and how can I fix it.

    Contacts are designed to be synced to a supported application on the computer or a cloud service.
    Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
    If you have failed to use the device as designed it may be too late to recovery anything.
    Is the device regularly backed up to a computer via iTunes?  If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

  • HT1222 Peace, I am one of millions who is loyal and loves apple, I was not completely happy with iOS7 for one thing which the new themes and I really think that the old icons theme is what's makes it unique, I was wondering if we can make an option  to ch

    Peace, I am one of millions who is loyal and loves apple, I was not completely happy with iOS7 for one thing which the new themes and I really think that the old icons theme is what's makes it unique, I was wondering if we can make an option  to choose from new and previous once?

    User to user forum.
    You are not addressing Apple here.
    No, once you install iOS 7 that is it.

  • My iPad mini has not been charging well recently but i have purchased a new cable and it still is not charging and has no battery. Someone Help  PLEASE

    My iPad mini has not been charging well recently but i have purchased a new cable and it still is not charging and has no battery. Someone Help  PLEASE

    1. Reset iPad; hold the Sleep/Wake and Home button down until you see the Apple Logo
    2. Try another wall socket
    3. Try another cable (make sure it's an original Apple cable)
    4. Try another charger (make sure it's an original Apple charger)
    5. Clean Lightning port with compress air or new paint brush

  • Printer has new all new ink and still will not print

    I just got back to school and unpacked my HP Photosmart 5514 CQ183A printer. Upon trying to use it I noticed the ink was empty, so I went to the store and bought brand new 564 ink in every color. I installed them all properly and went to print again, and it still did not work. So I pressed "clean printhead" in the tools menu. Ink slowly started to appear on the paper so I "cleaned the printheads" a few more times until it was all perfect. I then printed what I needed, turned my printer off and went to sleep. This morning I woke up and tried to print again and it is doing the same exact thing as last night. Worst part is, it says all of my ink except for black is now empty. How can that be when I just bought all of them last night and only cleaned the printhead 8 times and printed 2 pages of only black ink the night before??
    I bought the printer in late June of 2012 and I only use it when I am at school 7 months out of the year. When I pack up and go home I put the printer back in the box with all the orginal packaging. I do not understand why a printer that has only been used for about 14 months is haveing this problem!

    Hi hellohpthisisst,
    Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5514, you are unable to print after replacing the cartridges.
    I see you have done the printhead cleaning a few times to try and fix the ink issue you were experiencing, please remember when doing service tasks on the PS 5514 it will use some ink. However you're right, the cartridges should not be empty. I would like you to take a look here and make sure the cartridges are properly vented: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages.
    Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
    If you are still running into print quality issues, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
    I hope to hear from you soon.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP Printer not working in spite of all new inks and following all remedial instructions

    I have followed every advice given but to no avail, including that given on the printer itself but I just cannot print  from my Mac.  Scanning straight from the printer is fine, but not from the computer. This problem only started today.
    Over 80 and cannot think what else to do! Please can you help? Thank you.
    This question was solved.
    View Solution.

    Thanks for letting me know that you are now able to print but you can't copy, Sirodyam.
    We are getting there. I think you are doing just fine.
    I have provided a few more steps you can try if you like, for the printing being faint and not being able to copy.
    Are you using Genuine HP Cartridges?
    I would do a hard reset to see if that will resolve the issue for not being able to copy.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    I have provided this document with some steps to try, to see if it will resolve the issue.
    Fixing Print Quality Problems for the HP Photosmart Wireless e-All-in-One Printer Series (B110).
    Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
    Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (Photosmart B110a)
    If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
    Try printing and copying again.
    Please let me know the outcome.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Just installed new ink and printing blank documents

    just installed new ink now will not print just prints blank documents

    Please download and run this tool to fix the issue:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02114788&cc=us&dlc=en&lc=en&product=4083969&tmp...
    Although I work for HP, I am speaking for myself and not for HP.
    Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )

  • New ink cartridge alignment test Deskjet 5440

    I got a new computer and plugged in my old Deskjet 5440. I downloaded and installed the recommended driver from the HP support website. I then replaced the color and black ink cartridges. On my last computer when I changed cartridges I was asked if I wanted to align them. This time (twice) I was not.
    How do I run an alignment test?

    Hi @KroebY, 
    Welcome to the HP support Forums! I see you have replaced the black cartridge on your HP Deskjet 1010, but it is not registering the new cartridge. You are unable to copy or print, you can make a scan. I notice you said your DJ 1010 was not compatible with the Windows 8.1 Operating system, there are full feature software and drivers available for your printer.
    Let's start troubleshooting the print quality issues: Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Deskjet Ink Advantage an...
    Does this help, are you now able to print and make a copy? If yes, continue below:
    Now, the software:
    1. Unplug the USB if using a direct connection.
    2. Remove the HP DJ 1010 software from your computers Control Panel's Uninstall a program option.
    3. Restart the computer.
    4. Make sure all the DJ 1010 software is gone from the programs list as well as your HP folder listed under the All programs in your Start Menu.
    5. Now go ahead and download the software and drivers for your DJ 1010 (DO NOT plug in USB until the software prompts you to):
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=dj-117518-4&cc=us&dlc=en&lc=en...
    6. Go ahead and print a test page.
    7. If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    Please let me know if you are not able to print, and if the installation was successful.  I will watch for your reply.
    Thank you,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • My itunes radio is not working on my microsoft compuer. I downloaded the new itunes and it says there is an error in the itunes store. I am not sure what is going on?

    My itunes radio is not working on my microsoft computer. I downloaded the new itunes but it says there is an error in my itunes store. What do i do to fix the problem?

    Try starting Aperture with the command and option keys held down.  You'll get 3 options.
    Try each, starting at the top, in order, checking after each to see if it fixes the issue.

  • Ok... i am trying to sign into my apple account in the itunes store on my ipod and i have all the correct data for my credit card and it says " your payment information does not match your banks records. try again or nenter a new payment method. " help me

    ok... i am trying to sign into my apple account in the itunes store on my ipod and i have all the correct data for my credit card and it says " your payment information does not match your banks records. try again or nenter a new payment method. " what does this mean and how can i fix it??

    - See:
    ]iTunes Store: My credit card's security code or zip code does not match my bank's records
    - If still problem contact iTunes by:
    Contact iTunes

  • Working in FCP6, open a project, sequence not showing ANY fonts from motion master templates. Start new sequence and they appear fine. Whats up with it?

    So here's what I've got: one of the first gen Intel Macbooks with 2gb RAM, running a fresh install of FCS2, fully updated. I pulled out my external with my project on it (saved in the same version), that I keep my demo reel updated on. I've always used the motion text master template files to label each clip and for some reason, this round the text isn't appearing. Let me be clear just how weird this is: the template file will show up in the viewer, but any file set in this sequence will be blank. If there is any graphics to the file, IT shows up, but not the text. I opened up a new sequence and and first added a new master file to it, and it showed up on that sequence. I then went to the old sequence and copy/pasted the clips in it to the new sequence and the text shows up as well. What is up with the original sequence that is causing this issue??? Any thoughts? (unfortunately, my copy of Final Cut is a "Not for Resale" (NFR) so I can't call in for support.
    Thanks in advance!!!

    Hi Miro,
    I was just experiencing a similar problem today.  In my situation I was getting the diagonal lines and the new project wasn't actually being trimmed, it was the same size as the original with all of the media from the original project .
    It turns out that even though I was selecting 3 specific sequences out of 20 the Project Manager was ignoring that selection, it brought over those 3 sequences but all of the media from the other sequences.  I think this is what was creating the problem.
    The trim unused media box  (or whatever the check box says) was greyed out.
    My solution was to create a new clean project and import the 3 sequences I wanted to create a new trimmed project from.
    Then using the Project Manager everything worked as expected, the project was trimmed down and there were no diagonal lines.  I unchecked the "rename media" option, not sure if that was necessary part of the solution.
    This seems like a bug to me, we shouldn't have to create a new project, it's an extra unwanted step and clutter on our systems.
    Hope that helps! 
    I'm on Mac 10.8.5 and Premiere 7.0.1, eagerly awaiting to update once the bug fixes to the bug fixes are fixed.
    Gerry

Maybe you are looking for