Photostat Model HPPhotosmart Plus Prints very slow. WHY?

HP Photosmart plus Model B210 prints very slow. Is this normal. What is pages per minute for this machine??>?

Hi,
Do you use wireless print ? If yes, when you are sending something to print how BUSY is the wireless router ? (Are you streaming videos, downloading something ...). Please bear in mind, the router can slow the printing jobs, not the printer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Acrobat XI printing very slow

    Hi,
    Just upgraded to Acrobat XI v11.0.0.379 from v9 on a Windows 7 x64 system. I find the printing very slow compared to v9. I have a single page text PDF that I print regularly. Under v9, it takes 7-10 seconds to start the print. Under XI, it takes 6-7 minutes to print the same document. Anyone know why this is happening? BTW, I discovered if I set it to "print as image", it will print at about the same speed as v9.
    Thanks for any help.

    Hi Dov,
    The printer is a HP LaserJet 2605dn with 128MB of memory. This is the info from Windows test page:
    The information below describes your printer driver and port settings.
    submitted Time: 11:05:57 am 11/12/12
    Computer name: PC
    Printer name: HP BW
    Printer model: HP color LaserJet 2605/2605dn/2605dtn PS
    Color support: NO
    Port name(s): HP
    Data format: RAW
    Share name:
    Location:
    Comment:
    Driver name: PSCRIPT5.DLL
    Data file: HPMCPD25.PPD
    Config file: PS5UI. DLL
    Help file: PSCRIPT.HLP
    Driver version: 6.00
    Environment: windows x64
    Additional files used by this driver:
    C:\Windows\system32\spool\DRIVERS\x64\3\HPZLSLHN.DLL  (61.053.25.9)
    C:\Windows\system32\spool\DRIVERS\x64\3\HPZSSLHN.DLL  (61.053.25.9)
    C:\Windows\system32\spool\DRIVERS\x64\3\HPZUILHN.DLL  (61.053.25.9)
    C:\Windows\system32\spool\DRIVERS\x64\3\HPZSRLHN.DLL  (61.053.25.9)
    C:\Windows\system32\spool\DRIVERS\x64\3\HPZSCLHN.INI
    C:\Windows\system32\spool\DRIVERS\x64\3\HPMCPDPS.XML
    C:\Windows\system32\spool\DRIVERS\x64\3\HPZSCLHN.DTD
    C:\Windows\system32\spool\DRIVERS\x64\3\HPZFNLHN.NTF
    C:\Windows\system32\spool\DRIVERS\x64\3\HPMCPD25.CFG
    C:\Windows\system32\spool\DRIVERS\x64\3\HPZSTLHN.DLL   (61.053.25.9)
    C:\Windows\system32\spool\DRIVERS\x64\3\HPZEVLHN.DLL   (61.053.25.9)
    C:\Windows\system32\spool\DRIVERS\x64\3\HPCDMCLH.DLL   (1, 0, 2, 24)
    C:\Windows\system32\spool\DRIVERS\x64\3\HPZIDR12.DLL   (11.2.1.51)
    C:\Windows\system32\spool\DRIVERS\x64\3\HPZINW12.DLL   (11.2.1.51)
    C:\Windows\system32\spool\DRIVERS\x64\3\HPZIPM12.DLL   (11.2.1.51)
    C:\Windows\system32\spool\DRIVERS\x64\3\HPZIPR12.DLL   (11.2.1.51)
    C:\Windows\system32\spool\DRIVERS\x64\3\HPZIPT12.DLL   (11.2.1.51)
    C:\Windows\system32\spool\DRIVERS\x64\3\HPZISN12.DLL   (11.2.1.51)
    C:\Windows\system32\spool\DRIVERS\x64\3\HPBMIAPI.DLL   (2, 1, 1, 0)
    C:\Windows\system32\spool\DRIVERS\x64\3\HPBMINI.DLL   (61.053.25.4)
    C:\Windows\system32\spool\DRIVERS\x64\3\HPBOID.DLL   (2,2,1,51)
    C:\Windows\system32\spool\DRIVERS\x64\3\HPBOIDPS.DLL   (2,2,1,51)
    C:\Windows\system32\spool\DRIVERS\x64\3\HPBPRO.DLL   (2,2,1,51)
    C:\Windows\system32\spool\DRIVERS\x64\3\HPBPROPS.DLL   (2,2,1,51)
    C:\Windows\system32\spool\DRIVERS\x64\3\HPEACLHN.HPI
    C:\Windows\system32\spool\DRIVERS\x64\3\PSCRIPT.NTF
    C:\Windows\system32\spool\DRIVERS\x64\3\PS_SCHM.GDL
    This is the end of the printer test page.
    This is the same printer I used with version 9 and "print to images" was not set in v9. The file is 51 KB in size.
    Thanks

  • HP LaserJet P1006 Print very slow with Windows 8.1

    I have an HP LaserJet 1006 that is installed on Toshiba Laptop running Windows 8.1 and was working fine even from time to time it stop working at all, then I have to remove the software and then reinstall it again and then it works fine, last time I downloaded the Windows 8.1 Driver for the printer.
    But this time, first I tried to remove the software but it didn't work; the printer still show up on the control panel - Devices and Printers. then some how I was able to reinstall the software , after that the printer is working but printing very slow even it is a LaserJet printer.
    Please any one can help with that?
    Thanks;
    Waleed;

    Hey @wmowafi,
    Welcome to the HP Support Forums!
    I understand that you're experiencing a slow printing issue on Windows 8.1 when printing to your HP Laserjet P1006 Printer. I would like to work with you today at resolving this issue. Now the only driver available for your product on Windows 8.1 is a hostbased plug and play basic generic driver. Therefore, there is limitations for what can be done for troubleshooting. As you stated, you have already attempted an uninstalled and reinstalled of the driver to no avail. I'm going to suggest some further steps and tools to resolve this issue for you.
    Step 1: Uninstall Your Printer:
    Disconnect your USB cable
    Click the following link: Fix problems that programs cannot be installed or uninstalled to access the Microsoft Uninstall Tool.
    Once the website opens, select Run Now on the right hand side
    Allow the Tool to run.
    When prompted choose Uninstall
    A list of programs should populate and you're looking for the Laserjet. It may appear as LJ P1000 series. Please select the Laserjet series and Uninstall it.
    If the Laserjet doesn't show in the list of programs than your Windows 8.1 computer does not see the Laserjet driver as properly installed.
    Step 2: Clear the Temp Files:
    Launch your Start screen by right clicking on the Windows icon on the bottom left of your screen or by select the Windows button on your keyboard located to the right of the Ctrl button.
    Once the Start screen launches, type the word Run
    Click on Run to launch it
    In the Run box type %temp% and select OK
    Once the Temp folder opens, hold down Ctrl + A at the same time on your keyboard and everything will highlight in the folder. Select 'Delete' on your keyboard. Don't worry, no files or folders on your actual computer will be removed during this process. If a file is still be used on your computer you will get a pop up to 'skip' the file
    Once the Temp folder is emptied of its files, close the window
    On your Desktop, right click on the Recycling Bin and left click on 'Empty Recycling Bin'
    Restart you computer
    Step 3: Reinstall the Laserjet P1006:
    Please keep your USB cable disconnected
    Click on the following link: HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver
    The driver page for your product will now launch
    Select Download and allow the download to Run
    Once the download is complete an extraction will automatically run and once completed the installer will launch
    Run through the step-by-step on screen instructions.
    Please do not plug in your USB cable until prompted
    Ensure that your USB cable is plugged in from the rear of the printer directly to the computer. Avoid extenders or docking stations as they can cause printing and communication issues.
    Test printing!
    Please let me know if the steps I've provided resolve your issue. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • I using 4s and upgrade new version IOS8 but my unit is very slow why?

    I using 4s and upgrade new version IOS8 but my unit is very slow why?

    And how I can get lower version. I need to be lowerversion because IOS7 is very smooth on my unit.

  • Print very slow

    lightroom4 works well,but when i go into print module everything gets very slow,was ok.The same applies when I go to print in CS5,windows 7,64 bit ,a fast computer.

    Hello , Welcome to the HP Community. I hope you have a pleasant experience here. I'd like to help you with the issue you are having with slow printing document when using the Google Cloud Print function with your HP LaserJet P1102w printer. When you tested the ePrint speed, did you print the same document you attempted to print when testing the Google Cloud Print? The reason I ask is that some larger PDF files may take longer to process at the ePrint and Cloud Print servers, which could be causing the delay. If you have already tested using the same document, I'd suggest making sure you have the most recent firmware update for the P1102w. You can download the firmware update utility here - HP LaserJet P1102w Firmware Update UtilityNOTE: You'll want to make sure that the printer is USB connected before running the update, any interruption during the update can cause serious issues with the printer. You can also try removing the printer from your Google Cloud Print account and re-adding it. Here are the steps to do so: Open the Google Chrome Browser on your computer.Make sure your Gmail account is logged in.Go to www.google.com/cloudprint.On the left hand side, select Printers.Click on your HP P1102w and select Delete at the top.On the left hand side, select Add a Cloud Ready Printer.Select HP from the list of manufacturers.Below the picture of the printer, under Setup Instructions, select the 2.Click here link.Type in your printer's ePrint e-mail address, and click Connect.Retry the print job using the Google Cloud Print service.Please respond to let me know if this worked for you.Have a great day.

  • TS4002 icloud mail appears to be very slow.why?

    icloud mail appears to be very slow today,why?

    I spoke to Apple also.  They confirmed that the problem is on their end.  They put my account into "trouleshooting mode", issued me with a temp. password and told me it should be fixed by Wednesday of next week.  I did not hold back on expressing my disastisfaction with how long it would take them to fix - email being critical to my business.

  • On opening up PSE9 it runs very slow, Why?

    When I open up my recently installed PSE9 program it runs very slow. all photos etc load up and are visable but it almost feels  like there is a program running in the background. The cursor moves very slow and in a delayed way. I mostly have photos and very few videos, projects etc but just in case I go to view and uncheck vidoes, PDF, projects etc just in case this is what is slowing everything down but it doesn"t change anything. Nothing else is running while I am in PSE. Previuosly I was working with version 8 and I did not have this problem. Can someone help me with this this annoying problem that is keeping me from using PSE 9. Thanks  Rey

    You really don't provide enough information for anyone to help
    How to ask a question http://forums.adobe.com/thread/416679
    Some specific information that is needed...
    Brand/Model Computer (or Brand/Model Motherboard if self-built)
    How much system memory you have installed, such as 2Gig or ???
    Operating System version, such as Win7 64bit Pro... or whatevevr
    -including your security settings, such as are YOU the Administrator
    -and have you tried to RIGHT click the program Icon and then select
    -the Run as Administrator option (for Windows, not sure about Mac)
    Your Firewall settings and brand of anti-virus are you running
    Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
    -or the brand/model graphics chip if on the motherboard
    -and the exact driver version for the above graphics card/chip
    -and how much video memory you have on your graphics card
    Size(s) and configuration of your hard drive(s)... example below
    -and how much FREE space is available on each drive (in Windows
    -you RIGHT click the drive letter while using Windows Explorer
    -and then select the Properties option to see used/free space)
    While in Properties, be sure you have drive indexing set OFF
    -for the drive, and for all directories, to improve performance
    My 3 hard drives are configured as... (WD = Western Digital)
    1 - 320G WD Win7 64bit Pro and all programs
    2 - 320G WD Win7 swap file and video projects
    3 - 1T WD all video files... read and write
    Some/Much of the above are available by going to the Windows
    Control Panel and then the Hardware option (Win7 option name)
    OR Control Panel--System--Hardware Tab--Device Manager for WinXP
    And, finally, the EXACT type and size of file that is causing you problems
    -for pictures, that includes the camera used and the pixel dimensions

  • HP Officejet 4355 Printer suddenly start printing very slow! HP technician advice needed!

    Hi,
     My HP Officejet 4355 All-in-One Printer suddenly start printing very very slow! I've had it for 4+ years and by God it never ever gave me any problems (maybe minor once, but never actually drove me crazy), considering that i used it very often at home and in the office. I always buy original HP ink cartridge (except that once, when i wanted to see how the refill works - it doesn't), and now latest cartridge has been in the printer for a month or two, nothing unusual, and suddenly my printer starts to print very very slow, if normally it took 10-15 sec for a black and white page, now it take 10-15 minutes! Could anybody suggest help?
     Please do not talk about computer/Windows/USB settings, they all work fine. I disconnected printer from PC and did "Align Print Cartridge". First step, the printed part, took 10 minutes, second step, scanning part, did not go through. It said printer can't allocate aligning page...
     By the way, i did look around for the answers and found that some people say it's a ink cartridge fault. But i used this cartridge for a few months now, it's almost, but not yet finished, it was printing perfectly so far. Printouts during this issue come out OK, 7 out of 10.
     Anybody have any ideas? If I could attract professional help of HP technicians, it would be perfect.
    Thank you.
    © RedStarLimitless ©
    This question was solved.
    View Solution.

    Even though they still have ink a cartridge may fail and give the results you are seeing, where the printer makes a swath and then waits 10-15 seconds for the next swath. This is caused by the failure of one of your cartridges.  Removing each cartridge and cleaning the contacts on the cartridge and printer may resolve the issue.  
    I do not recall if the Officejet 4355 supports reserve mode, but try the following:  Remove the black cartridge and print a test page.  Does the printer print at normal speed?  Is so the black cartridge was the issue and should be replaced.  If not then put the black cartridge back in and remove the color cartridge and print test page.  If the printer now prints normal speed the color cartridge was at fault and needs to be replaced.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HT1338 epson 545 prints very slow with airport

    Epson 545 does not show in airport utility, but will print very slowly. 

    I would try this:
    Do a factory reset on your printer (check the manual for how)
    Go to system preferences > Printers and Scannerscontrol click on your printer in the column on the left, and select Reset Print system..., and reset in the next dialog
    Delete all other Epson applications and Epson printer utilities.
    power down everything: modem, router, computer, and printer.
    restart the modem and let it power up completely
    restart the router and let it power up completely
    restart the computer and let it power up completely
    restart the printer. Enter your wifi password in the printer to connect it to the network.
    go back to printers and scanners. It should see the printer and install the print driver.
    resist the temptation to use any other Epson software

  • Hp4630 printer is printing very slow

    hp4630 printer is printing very slow

    Hello @tommy2tone , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are having issues with your print speed.  I would like to help!
    Are you connected via wireless, or USB cable?
    If you are wireless, do you have the same issues when printing via USB?
    Do you have the same issues when making a copy as opposed to a print?
    I'd recommend starting with a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also recommend downloading and running the HP Print and Scan Doctor.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Why is printing very slow on firefox

    I am having a hard time printing using Mozilla Firefox - I have a problem printing from Microsoft Office 2007, Go-Daddy E-mail the internet or other databases that I work from
    What can I do to speed up printing - I kind of just hangs there and takes a long time to print.

    Yes - the status of the printer says that it is spooling - this goes on for a 3 minutes.
    Do you think it is a printer issue.
    Thank you

  • Contacts app is very very slow; why?

    With my Z1, searching for contacts was very fast. It was real-time as I type the characters.
    With my Z2, it is unacceptably slow. It can be a few minutes to search for contacts. Even when I go to Favouites where I have only eight contacts, the page takes a while to load. When I go to Contacts and search for a contact it can take a few minutes for the contact to be found. Then, when I select that contact, it can take a few minutes again to display the content.
    Why is that?
    Yes, I have many contacts (maybe 4,000+) and many are duplicates linked from Exchange and LinkedIn. But even when I turn off Auto-Sync, it can still be unacceptably slow.
    And I don't keep many apps open at the same time.
    What are the possible things I can try?
    Thanks,
    CWL88

    I'm afraid it's not possible to disable the online search. Even if you disable synchronization of contacts it will still search against the server. I will forward this as feedback internally but currently you would need to remove the ActiveSync account to stop online search. A workaround may be to use another client instead like Moxier, RoadSync or Nitrodesk.
    The more contacts you have the longer it will take to load all contacts if it's no longer stored in RAM. You can force contacts to stay in RAM but to avoid it being closed, close other apps when you're not using them by pressing the lower right icon and swipe them away. But Z2 has 3GB RAM so usually this is not needed but it depends on what other apps you have any how much RAM they use.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • 5740 printing very slow

    We have just installed new printer and it's taking 3-4 mins to print a page. Help!

    i have to say that printing and setting up printers on linux distro's has been nothing but a pain in the butt. 
    i have two canon's (S400 and  a S630) that print slower than i work, and that's pretty damn slow  .
    the S630 will only work partially at best and the S400, well let's just say i can go out to play for awhile.
    to print to full capacity and for critical stuff i have to go back into windows, blah
    i recently swapped out the S400 for a used Epson 480SXU. the printer is very compatible with linux and prints just ok speed wise and also does photo's pretty well.
    the one distro that seems to have a handle on printers to some extent is Mandrake. i may try out 10.0 in the future just to see if  they got some more printers working.
    i am also going to try out turboprint:
    http://www.turboprint.de/english.html
    i see your printer listed as well as my canons.
    even though this is pay for it stuff i don't think it's so much as to break the bank as long as it works.
    i'll keep you posted,
    slyski

  • Photosmart 5524 wireless printing very slow or not printing

    I bought a HP 5524 (CX047B) yesterday, and downloaded drivers from HP (Photosmart-5520-series_v12.23.0). It seems today that more recent drivers are available for OSX Mountain Lion 10.8.3, so I am now using HewlettPackardPrint2.13. I used HP Uninstaller before loading the drivers in both cases. Wi-fi signal is good (Apple Time Capsule 4th gen). The printer is intended for use by Mac users on a home network. At the moment it is not working properly.
    I have not tried printing a photo yet...I tried printing an email I received  (with a diagram) using USB connection, the results are fine. If I print using wi-fi the print job shows 'print file accepted' in the queue...but nothing happens for 2-3 minutes, and then if I am lucky the printer produces the header from the email. The printer then shows a message 'Cancelling' and eventually becomes free. 
    So at the moment I have a wi-fi network printer that can only be used f you walk your laptop down to it and use USB.
    (fyi I have used a HP B209a-m as a wi-fi network printer for 3 years without problems, until it decided not to wotk earlier this week). Suggestions please. Clive Parfitt
    This question was solved.
    View Solution.

    Reset the printing system:
    - Go to System Preferences > Print & Scan
    - Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and then next to the "Use" pulldown, select the printer model (not AirPrint). Wait until the "Add" button becomes available. Click it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Acrobat 9 Pro printing very slow

    Dear All,
    I have recently installed Acrobat 9 Pro on Mac OS 10.6 Snow Tiger. Works fine, but is incredibly slow in printing. Spooling takes ages.
    The same files printed with Adobe Reader or Mac Preview print instantly (it's only text files, nothing heavy).
    I have made sure that the "print as image" option is deselected. This happens with any printer (I have tried it on an HP LJ1300, an HP LJ2055, an Aficio 5000, Aficio 2000, and a Xerox Workcenter - so I suppose it has to do with Acrobat, not with the printer).
    Thanks
    Andrea

    For both of you See if there is a new print Driver version for your printer.
    For the person with OSX.6 (Snow Leopard)  do the following to install.
    go to printer Utility and Delete the current Driver from list (after downloading latest Driver from Manufacturer).
    install new Driver perinstaller.
    Open Printer Utility
    look for the new Printer listing and select.
    Choose new Printer Listing as Your default Printer
    close Printer Utility.
    Go to System Preferences
    Click Printing & Faxing (if still named that in SnowLeopard)
    Choose your new printer Driver as default there as well.
    close System Prefernces
    Your now set to use the latest Driver

Maybe you are looking for