Photostream has different content on different iOS 6.1.3 devices

Hi,
I have lots of photos in my IPad 3 photostream which do not appear on iPhone 5 photostream.
I've followed advice in faqs and troubleshooting, checking photostream is on, making sure camera is closed, making sure wifi connected and over 20%power etc. I've turned photostream off on the iPhone then back on but it just uploads the same small bunch of photos as before. I've then waited an hour or more, which is advice from other discussions but still nothing.
Increasingly frustrated by Apple devices not fulfilling the old 'it just works' tag line but suspect user error is the issue! Any help greatly appreciated.
Thanks
Dan

What you may not know is that photo stream only keeps photos for 30 days, even though photo stream photos will remain on your device (up to 1000 photos) until you delete them.  Thus, when you enabled photo stream on your iPhone, you only received the photos added to your photo stream during the last 30 days (as the others are no longer there).
I suspect it was designed this way because photo stream is a totally free service and does not count against your storage plan.  In order to remain a free service, there had to be a restriction on how long these photos remained in iCloud.

Similar Messages

  • In my Iphone 5 and I Pad  inbox i get dozens of mysterious messages that I can't delete. They all say  (No Sender) (No Subject) This message has no content  Date: different but all of them way before the internet (late 60's early 70's and some times 2000)

    In my Iphone 5 and I Pad  inbox i get dozens of mysterious messages that I can't delete. They all say
    (No Sender)
    (No Subject)
    This message has no content
    Date: different but all of them way before the internet (late 60's early 70's and some times 2000)
    can't open or delete any of them. These messages are not on my PC
    I have three different accounts but it seems like they are coming from my gmail account
    Thanks for the help
    JC Garza

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

  • ITunes Match showing different content on different devices

    I have recently signed up for itunes match and have connected three devices as follows:
    Windows 7 x64 PC running latest itunes 10.5.2.11
    Apple ipad version 1 64gig 3G with iOS 5.01
    iPhone 3GS 16gig with iOS 5.01
    I have matched 4900+ songs from my PC iTunes library with iCloud. I have recently removed all my old music files and re-downloaded the iTunes *.m4a version of every matched song.
    I also have uploaded 1000+ songs that were not matched. I have no errors at all... so PC iTunes software appear to be working okay.
    My Ipad and iPhone have also been switched over to iTunes Match and I have therefore deleted all 'local' songs on both devices... I then switched on the 'SHOW ALL MUSIC' in the settings of the music app to show the icloud list... but it is different on both my ipad and iphone compared to the PC and compared to each other.
    My PC has a total of 5992 music files either matched or uploaded to iCloud
    My Ipad shows 5804 music files on icloud
    My iPhone has 3632 music files on icloud
    Loads of space is confirmed as being available on both devices
    I have tried rebooting both ipad and iphone I have switched off/on 'SHOW ALL FILES' in settings to reveal that there are no songs on either the iPad or iPhone so only seeing view of songs on iCloud.
    I have turned off/on icloud on both devices and still same file totals.
    I have even updated itunes match several times from my PC via itunes store menu.
    I have switch on/off itunes Match on my PC... I have even backed up my library deleted all the music both locally and on Icloud and then re-imported and rematched/uploaded all the files again without any errors but both my iPad and iPhone fail to see all files on the icloud.
    I have even waited quite some hours to see if they eventually will update but no luck.
    I have submitted feedback to apple as a bug report, but if anyone has any suggestions that I can try in the meantime to fix this 'out of sync' issue.
    Also on the PC in itunes preferences. I have reset cache and sync history in iTunes but still no joy - it appears that the iphone and ipad are not receiving the current version of my icloud content?

    Same problem here. I dont find all songs back on my iphone although i have activated all required items in itunes and on the iphone.
    I got a rather big library (16k songs), not everything matched BUT for example i only see Artist starting with "A"... all the other ones are not on my iphone.. very strange.
    - Same story under my songs.
    - All my playlist on the other hand are shown..
    So it would be nice to find out what to do about this...

  • How 2 get T. Machine to back up different contents to  different drives ?..

    hello to all
    1st - i hope this hasn't already been posted elsewhere ....
    my problem is this : i have an EXTENSIVE iTunes music library & concerts on video which i keep on two W.D 1Tb external drives - 1 for music & another for video. then i have another W.D 1Tb external drive as my T.Machine. what happens is that it gets ''clogged'' backing up all those vids & all that music, so my question is : would it be possible to have T.Machine back up my iTunes to 1 drive , my videos to another & all the rest ( computer content for lack of a better word..) yet to another ? if T. Machine isn't able to do this natively is there maybe some software that ''teaches it'' this new trick ? any help/advice would be greatly appreciated
    thanks
    N

    hi guys
    & many thanks !
    i think i'll follow up V.K's suggestion + the ''concatenated raid sets Pondini's pointed out but....jdehnert, how could i back up 950Gb of music into an iPod ? all of my music is in AIFF - through my stereo you DO NOTICE between MP3 & that...
    online back up ? sounds perfect but the ''Gb to $ ratio'' still is ridiculously expensive, maybe it will change in the future ?...
    at present, i have a total of 3 X W.D. 1TB My Book drives for my iTunes - 2 of which unplugged, 1 at my place & 1 at my Mum's, for video i only have 1 extra W.D. 1TB drive also unplugged. the ones i use routinely are plugged into the computer through Logitech powered USB hubs & then the whole lot into APC battery ''whatchamacallits'' so although not perfect, i feel i might get away with it should disaster occur - plus i have the physical CD's & DVD's stowed away at my sister's shop....
    the reason i've set up things this way is only as a space saver/practicality solution : my iMac is a computer/CD & DVD player -> connected to my stereo + my plasma & that allowed me to get rid of a CD player + a DVD player + a custom made cupboard where i kept the media : that took nearly 1 cubic meter of living room space ( 35 cubic feet it's a lot of... ) & you know what ? it works a treat, never misses a beat & i just regret not having done it sooner....
    so....let's roll up my sleeves & check that SuperDuper/CCCloner + the concatenated avenues
    thank you all for your input , it's much appreciated
    best wishes from Portugal
    N

  • Different content delivered to Internet Explorer than to Chrome?

    We recently noticed some rendering issues in the Chrome browser for our SharePoint 2010 site. The differences are primarily the top nav/horizontal nav and the quicklaunch navigation.
    Here's an example of our top nav code:
    <asp:ContentPlaceHolder ID="PlaceHolderTopNavBar" runat="server">
    <asp:ContentPlaceHolder ID="PlaceHolderHorizontalNav" runat="server">
    <SharePoint:AspMenu ID="TopNavigationMenuV4" runat="server" EnableViewState="false"
    DataSourceID="topSiteMap" AccessKey="<%$Resources:wss,navigation_accesskey%>"
    StaticSubMenuIndent="0" StaticPopOutImageUrl="/_layouts/images/whitearrow.gif"
    UseSimpleRendering="true" UseSeparateCSS="false" Orientation="Horizontal" StaticDisplayLevels="2"
    MaximumDynamicDisplayLevels="2" SkipLinkText="" CssClass="s4-tn" />
    <SharePoint:DelegateControl runat="server" ControlId="TopNavigationDataSource" ID="topNavigationDelegate">
    <Template_Controls>
    <asp:SiteMapDataSource ShowStartingNode="False" SiteMapProvider="SPNavigationProvider"
    ID="topSiteMap" runat="server" StartingNodeUrl="sid:1002" />
    </Template_Controls>
    </SharePoint:DelegateControl>
    </asp:ContentPlaceHolder>
    </asp:ContentPlaceHolder>
    The Chrome browser is actually receiving a different response than Internet Explorer from the server. Chrome receives this additional CSS code within a style element just before the end of the head element:
    .zz1_TopNavigationMenuV4_0 {
    background-color:white;
    visibility:hidden;
    display:none;
    position:absolute;
    left:0px;
    top:0px;
    .zz1_TopNavigationMenuV4_1 {
    text-decoration:none;
    .zz1_TopNavigationMenuV4_2 {
    I checked this behavior by requesting the page using cURL using IE's user-agent string and using Chrome's user-agent string and found the same difference.
    Additionally, the output HTML output of the menu is different. The Chrome version uses a series of span elements to contain just teh top-level links, whereas IE uses nested unordered list elements (ul) to display multiple levels of navigation.
    Is it normal SharePoint behavior to delivered different content to different browsers? I should be able to override the Chrome-specific CSS by using more-specific selectors, but I'm curious if others have run into this issue, and if so, how they have addressed
    it.

    Update:
    I already tested different user-agent strings, as I noted in my initial post.
    I do have a modified compat.browser file (in C:\inetpub\wwwroot\wss\VirtualDirectories\[sitename]\App_browsers\compat.browser (isMobileDevice is set to false for iPhone and some other devices). This certainly seems like a likely source of problems, but
    the same file, when applied to a development development environments, does not cause the same problem.
    Production and development environments are all running Microsoft SharePoint Server 2010, database version 14.0.5136.5002.
    I changed the custom masterpage to an OOB masterpage (nightandday.master). Although the top nav is not present in that masterpage, the differences between Internet Explorer and WebKit browsers were apparent. (The differences are not apparent in the development
    environments).
    Disabling the custom top nav feature does not address the issue (i.e. the default top nav exhibits the same problem)
    Additionally, as suggested on some other sites, I checked the mozilla.browser file at C:\Windows\Microsoft.NET\Framework64\v2.0.50727\CONFIG\Browsers. The file contains an entry that should match Safari and Chrome, but is identical across the production
    and development environments:
    <browser id="Safari" parentID="Gecko">
    <identification>
    <userAgent match="AppleWebKit/(?'webversion'\d+)" />
    </identification>
    <capture>
    </capture>
    <capabilities>
    <capability name="appleWebTechnologyVersion" value="${webversion}" />
    <capability name="backgroundsounds" value="true" />
    <capability name="browser" value="AppleMAC-Safari" />
    <capability name="css1" value="true" />
    <capability name="css2" value="true" />
    <capability name="ecmascriptversion" value="0.0" />
    <capability name="futureBrowser" value="Apple Safari" />
    <capability name="screenBitDepth" value="24" />
    <capability name="tables" value="true" />
    <capability name="tagwriter" value="System.Web.UI.HtmlTextWriter" />
    <capability name="type" value="Desktop" />
    </capabilities>
    <controlAdapters>
    <adapter controlType="System.Web.UI.WebControls.Menu"
    adapterType="System.Web.UI.WebControls.Adapters.MenuAdapter" />
    </controlAdapters>
    </browser>
    I was finally able to reproduce the issue in a development environment when I changed removed the adapter element from compat.browser and restarted IIS:
    <browser id="Safari2" parentID="Safari1Plus">
    <controlAdapters>
    <adapter controlType="System.Web.UI.WebControls.Menu"
    adapterType="" />
    </controlAdapters>
    </browser>
    The chain of browser property inheritance appears to be:
    Default > Mozilla > Gecko > Safari > Safari1Plus > Safari2
    The asp.net menu control not rending correctly in safari thread on Stackoverflow suggests a workaround, although since I
    have development environments not exhibiting the behavior I feel there is another way to address the issue.

  • Synching across ios devices with different content

    Hello,
    I am trying to assist a user at my company with synching his music content accross his devices using iTunes match.
    I want to validate that music pulled from CD from his iOS devices will or will not be deleted.
    Basically he does not have his home pc anymre that was used to download many songs from CD and put into iTunes. However, he has an iPad that contains those songs (as well as songs from iTunes) plus an iPod that may or may not contain music from CDs.
    We have enabled itues match via his work computer and we saw that it uploaded his purchased songs to match, however when we turned on Match from the iPad, its say that it would replace the songs that were on the device. Our concern is that the music from the CD's will be lost and just replaced with his purchased music.
    Essentially, we want the music from iTunes, Cds (on the ipad) and his iphone to all be stored and synced with iTunes Match accross all devices.
    thanks!

    Thanks. Is there a way, then, to share music and apps across devices with different Apple IDs? Or does all music need to be purchased separately. I'm asking because my daughter has lots of music and apps on an older device that were purchased using her mom's Apple ID, but is now ready to have her own account on her new device, but would like to keep the music she's accumulated.

  • I gave my wife my old iPad and it has the same name as my new one. How do I change the name of the old one to allow to have different content on our iPads?

    I gave my wife my old iPad when I bought an iPad 2. Both devices have the same name. Will this affect backups of our different contents?

    It's easy to rename each unit.  When you connect your iPad and it syncs, the unit will appear on the left of the iTUnes screens just click on the unit there and you can rename it.  You should do this immediately so you can see which unit was backed up by it's name. You can sync as many decices as you want in one iTunes library and you can even share Apps as long as you're going to sync both from teh same iTunes account.  My household has 2 iPad 2s and we share our apps, and we also share downloaded books, magazines, music, etc.......

  • HT1386 Can i sync multipler iOS devices like iPad, iPhones on the same iTunes? Can each iOS device have different contents which are subsets of the iTunes complete library

    Can i sync multipler iOS devices like iPad, iPhones on the same iTunes? Can each iOS device have different contents which are subsets of the iTunes complete library

    You can share a library with as many devices as you want but they cannot have seperate subsets like you wish. They would all have access to all information in the library. You could "Manually" sync content to each device by doing the following:
    On Mac: iTunes > Preferences > Devices Tab > Put a check in the box next to sentence that says "Prevent iPods, iPhones, and iPads from syncing automatically > Then click ok.
    On Pc: Edit > Preferences > Devices Tab > Put a check in the box next to sentence that says "Prevent iPods, iPhones, and iPads from syncing automatically > Then click ok.
    To manually sync data from iTunes to devices see article below:
     http://support.apple.com/kb/HT1351
    If you do not want all devices to have access to all the media from the main library, you would need to create a library for each device. See the article below for more info:
     http://support.apple.com/kb/HT1495
    Hope this helps.

  • How do I use iTunes on one computer to manage two iPads with different contents?

    I just bought an iPad Air 2 and want to use it with iTunes on my MacBook Pro.  No problem so far!  However, I want to continue to use my "old" iPad 2 for my wife and want to keep managing it as I always have using iTunes on my MacBook Pro.  The thing is that I want to make it possible for the two iPads to have quite different content to allow for the different needs and tastes of my wife and me.  How should I go about this?
    Thanks for any help.

    Hi Brett,
    Thanks very much for the information.
    I took a look at it but it seems to be aimed solely at "media" on an iPad, i.e. movies, music, TV shows etc.  This is fine, but I also want to be able to deal with all the apps on each iPad too, so that when I connect each iPad to my MacBook through iTunes, the synching process works just like it always has for my first iPad (an IPad 2).  I don't mean that I want all the apps on both iPads to be the same (my wife doesn't need all the apps that are on the iPad 2 at present), but I do want to be able to add/remove/update media and apps on each iPad, and update the iOS on each iPad. 
    Basically, I guess, I want a situation whereby when I plug in either of the iPads, iTunes recognizes each as a separate device and has a totally separate "library" (backup?) of music, movies, TV shows, etc. and — most importantly — apps.  Is that possible?
    Regards,
    Chris

  • Why in Windows 8.1 do I have 2 different Profiles with identical default folders but each with totally different contents?

    I want to backup my email messages and archives. I intend to them put into my 'Documents' folder for 'Cloud' backup and also into an external hard drive which I have always used in the past and, as a 76 year old with a new computer, 8.1 in place of XP and TB instead of Outlook Express, I just feel more confident about my external hard drive! I have TB 31 and Windows 8.1. I have set my computer to show 'hidden files and folders'. In username/AppData/Local there is a TB folder with 'Profiles' and it has my XXXX.default folder - but it only has a limited number of files and folders (Cache/cache2....). In username/AppData/Roaming there is also a TB folder with 'Profiles' and it has my same XXXX.default folder - but this contains a completely different and far more extensive collection of files and folders (4 different folders plus several MAB and SQLITE files and others). Why do I have two identical default folders with different contents? Do I have to save both of them? Can someone please explain/help, preferably in words that this 76 year old might understand.

    Thanks Matt. Reassuring to this elderly user! I'll make sure I back up my Profiles xxxx.default folder from the Windows Roaming directory - but should I back up the (different!) TB contents from the TB Profiles directory in Windows Local as well?

  • Best practice for sharing html content on different group spaces?

    How can html content be shared between several group spaces?
    One way I have found is to add a html doc to ucm and then to add this doc as a iframe to a page.
    Are there other ways, like adding on one group space page a html layout element and then to view this content in a different space. How could this be done, with an expression language reference?
    Has someone experience in presenting the same html content on different spaces and can share how he does it. Any ideas are welcome.
    Thanks,
    Max

    Hey Max,
    Check out our technical whitepaper on Integrating ECM with Portal Technologies.
    Our "Fishbowl Portlets" allow you to share any content - HTML, WYSIWYG user generated content, documents etc - in multiple contexts (portlets, web apps, etc).
    This is one of the things that we showcased as the recent Collaborate conference in Vegas - WebCenter framework, UCM and the portlets surfacing the same items in different contexts - all personalization aware, configurable and end user/super user editable.
    The white paper can be found here:
    http://www.fishbowlsolutions.com/StellentSolutions/ContentManagementResources/index.htm
    A blog post on it can be found here:
    http://cfour.fishbowlsolutions.com/2010/03/10/fishbowl-portlets-followup-cis-and-content-consumption-options/
    warmly,
    Billy Cripe
    Fishbowl Solutions

  • TS3999 Received 2 appointments, same date, same content, just different hours. Since then I receive message from iCal: Access to "Subject" in account "iCloud" is not permitted. The server responded "403" to CalDAVWriteEntityQueueableOperation. It's a bug!

    Received 2 appointments from a customer, same date, same content, just different hours. Since then I receive message from iCal: Access to “Subject” in account “iCloud” is not permitted. The server responded "403" to CalDAVWriteEntityQueueableOperation. In my opinion this is a bug, because iCloud is not able to handle 2 appointments at the same date with same content, just at different hours. The different hours should be enough individuality for each event on calendar.

    In my opinion this is a bug, because iCloud is not able to handle 2 appointments at the same date with same content, just at different hours. The different hours should be enough individuality for each event on calendar.
    Here are 4 identical events (other than time) in Calendar on my mac
    Here is how they appear at iCloud.com
    I concluded that iCloud has no problem with identical events seperated by time, so the question becomes what is wrong with your setup as opposed to what is wrong with iCloud.

  • ALE DIR originals to different content server

    We have a production content server and a test content server attached to our production SAP system and Test SAP system respectively.  The storage category names are the same in both systems.  I need to ALE selected DIRs with attachments from the production system to the test system.   I am able to ALE the DIR from the production system to the test system using bda5, but an ALE error results on the test (target) system during ALE processing because the originals being stored in a different content server, I'm guessing.  I have no problem ALEing DIRs with attachments between systems sharing the same content server.
    Is it possible to ALE a DIR with originals from one system to another if both systems use a different content server?  If so, how is this done?
    Thanks for the help,
    Joe S.

    Hi Joe,
    Have a look into the document in below link. It has very useful information on ALE configuration for DIRs.
    Hope this answers your requirement.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90402d62-cfd9-2d10-e78b-d323b71bb158
    Regards,
    Deepak Kori

  • Can I have 2 itunes accounts on one computer, one for me and one for my wife.  We want to synchronize different content to our iPhones.

    Can I have 2 itunes accounts on one computer, one for me and one for my wife.  We want to synchronize different content to our iPhones.

    HELLO EVERYONE,
    WELL I HAVE TWO ACCOUNTS TOO... ONE FOR MY BROTHER AND ONE FOR ME...
    THIS IS WHAT YOU WILL HAVE TO DO..
    EVERYTIME YOU OR YOUR WIFE LOG ON TO ITUNES YOU WILL HAVE TO GO TO THE TOP LEFT AND AT THE TOP IT WILL SAY STORE..
    YOU WILL HIT LOG OUT AND LOG OUT OF YOURS..
    THEN GO TO THE SAME PLACE AGAIN AND HIT LOG IN AND THAT SHOULD HOPEFULLY HELP..
    ANYTIME YOU HAVE A QUESTION JUST GO TO MY PAGE AND ASK ME[:
    THANKS,
    BK[:

  • HT4859 I have an iPhone 5 and have just set up the iCloud for it. I also have an iPad with different content and I also want to connect it to iCloud. Will I lose everything that's on my iPad or iPhone or do they sync together without losing anything?

    I have an iPhone 5 and have just set up the iCloud for it. I also have an iPad with different content and I also want to connect it to iCloud. Will I lose everything that's on my iPad or iPhone or do they sync together without losing anything?

    The problem is that all services are bundled with your Apple ID ([email protected]):
    Your iCloud account (Mail, Contacts, Calendars, Reminders, Notes, Backups, etc.),
    also iTunes & App Store purchases (Music, Movies, TV Shows, etc.),
    and the iTunes Match services.
    (I guess that all your devices - yours and your wife's are connected to one iTunes library, right?)
    If you want that your wife gets her own iCloud account for Mail, Contacts, Calendars, etc. but gets also access to your media then you have two set up two things on her device:
    iCloud (Settings > iCloud) with her account (e.g. [email protected])
    and
    iTunes & App Stores (Settings > iTunes & App Stores) with your account (e.g. [email protected]).
    In this case she gets access to your library and could use the same iTunes Match account.
    (See also: Using one Apple ID for iCloud and a different Apple ID for Store Purchases http://support.apple.com/kb/HT4895)

Maybe you are looking for

  • I can't get applications to stop reopening upon startup.

    I've quit all applications (not just closed them), unchecked the box in general preferences, and uncheck the box in the shutdown window, but they still open on startup!

  • How to retrieve a due date from a human task and create a report in BAM with it

    Hi. I'm working with a BPM process, the requirement is that I have a human task and a working hours limit to complete it. For this purpose I created a calendar in the bpm workspace and I've associated it to a role that executes that human task. Now I

  • Convert from RGB to CMYK

    I've been trying to find solutions to convert images/pdf's from RGB to CMYK. I've noticed that it's definitely possible to convert from CMYK to RGB, but haven't been able to do the reverse. Does anyone know of a method or a reference that might help

  • ODS Settings

    Hi all,   Whe i was doing settings  like , Bex reporting option , set quality status to OK , Update data from ODS to data targets automatically  to the ODS object 0FIAR_O03 , the changes were not saved after the activation of the ODS . But it is prop

  • WAD: Error Valid InfoObjects

    Hi Gurus, I have IP Layout with 9 Tabs(9 query) on it. My Variable Screen has 9 Product Hier (Optional).user can enter on one Product hier and get it to the Layout. if the user stays it the same Tab then No issues. But if the user moves to different