Photostream not importing correct photos

When I highlight and click to import photos from my phone to iPhoto from the Photostream, a set of flag icons start importing.  What's happening and how do I stop this?

just disabled and then re-abled Photostream, and some more photos appeared, but still not all of them.
This is very odd, anyone have any ideas?
thanks

Similar Messages

  • Iphoto photostream not importing correctly

    i use photostream from 2 iphones and an ipad, then manually import from my CF card using a canon EOs DSLR.  the manual imports are fine and all devices show the consolidated group of iphoto pics.  However when in iphoto i highlight a particular event of all the consolidated photos and drag them over to events.  I grabbed 123 photos but only 25 of them appear in the new event, am i missing something?  If i try it again it says i am duplicating the import, however i canty find where the photos have gone.
    I have been using this workflow for 2 years and only in the last 4 weeks or so has it not been importing all the photostream images, i may revert back to manual imports from the phone unless anybody can help?

    However when in iphoto i highlight a particular event of all the consolidated photos and drag them over to events.
    I don't understand this. How can you drag an Event to Events. Isn't it already there?

  • Lightroom will not import my photos.   It did up to a week ago.   I have changed cards and cameras (both worked two weeks ago).   I can import the photos to Picasa and iPhoto

    Lightroom will not import my photos.   It did up to a week ago.   I have changed cards and cameras (both worked two weeks ago).   I can import the photos to Picasa and iPhoto.   I get the following error message:  
    Some import operations were not performed.
    The following files were not imported because they could not be read  [followed by a list of the files I wanted to import]
    Thumbnails show up.  LR just will not import them.
    Any idea what is going wrong?

    If the Import button is not clickable, that means that Lightroom thinks you have no new photos to import (one possible reason is that they are duplicates)
    So, you need to figure out why Lightroom thinks that. The way I would do this is to search your Library module for at least one of the photos, by file name. To do this, you would follow all 4 of these steps in sequence:
    Click on All Photographs in the Catalog Panel on the left of the Library Module
    Turn off all Filters (Ctrl-L or Cmd-L once or twice)
    Expand all stacks: Photo->Stacking->Expand All Stacks
    Search for one or more of the photos using the Filter Bar (press backslash), search by File Name

  • PDF's not importing correctly

    I am using CS5 on iMac 27" quad.
    I am trying to import a PDF into Photoshop.
    But it is not importing correctly.
    The PDF is a label template, which prints perfectly from the PDF.
    But when I import it into Photoshop, the dimensions change.
    So the text boxes for the labels don't align up correctly to the label sheet.
    The top label is OK, but the boxes keep moving to the right, so that top label in column 5 is a 1/4" off to the right. The labels seem to be "traveling."
    Vertically, the same thing is happening.
    Row #1 is OK
    but by the end of the page, Row #5 is 3/8" off the page.
    I have disabled all printing options: no auto-center; no fit to page; no scaling.
    The printer software should not be adapting the document at all.

    Here are two articles to start with...don't know what you've tried so far
    iTunes Does Not Recognize Audio CDs
    You Can Not Import Or Play Music From an Audio CD in iTunes

  • Iphoto will not import my photos from my digital camera because it says it is having a problem downloading my photos. I'm using the same digital camera I have always had and have the current version of iphoto and am usuin snowleapord. Any thoughts?

    iphoto will not import my photos from my digital camera because it says it is having a problem downloading my photos. I'm using the same digital camera I have always had and have the current version of iphoto and am using snowleapord 10.6.8. Any thoughts?

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Canon 5D MK II white balance set as K does not import correctly

    With a 5D II and the Kelvin white balance set in the camera the WB does not import correctly for RAW files and LR 2.4. For example when set to a specified white balance as a Kelvin setting, for example 5200, and then import the raw files with "As Shot" specified or subsequently WB to "As Shot" in Develop module the white balance is set to 4850 +1 (in the example of 5200). The pre set WB options provided inthe camera do work correctly.
    Does anyone know if there is a way to set this up to work correctly? Has anyone else experienced this issue?
    Thank you.

    Does anyone know if there is a way to set this up to work correctly? Has anyone else experienced this issue?
    Lightroom does work correctly. The numbers are different, but the appearance ot the colour temperature matches. The way I understand it, cameras don't actually store Kelvin numbers, but store colour space co-ordinates instead. LR and your Canon are interpreting the RAW values into different colour spaces, so the kelvin values and tint numbers will differ.
    Hal

  • Please help... For some reason I can not import any photos on to my elements 10 organier.

    Please help... I can not import any photos on to my elements 10 organizer, it is saying files corrupt!!!!! What do I do?????  I have am using an apple, and i usually always get photos from iphoto but it is just not doing it. Please help!

    How are you trying to import the files? Are you using the import from iphoto command? What happens if you export the photos from iphoto to the desktop and use from files and folders? Does it work that way?

  • Why has photostream not deleted my photos?

    Why has photostream not deleted my photos yet as it has been over 30 days since they were streamed?

    Try the iCloud forum

  • Since my last software update, my iphoto 11 will not import any photos from any source. The circle just spins...when I go to force quit, it says iphoto not responding. Backed up iphoto library, uninstalled and reinstalled iphoto. Still not working. Help!

    Since my last software update, my iphoto 11 will not import any photos from any source. The circle just spins...when I go to force quit, it says iphoto not responding. Backed up iphoto library, uninstalled and reinstalled iphoto. Still not working. Help!

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • Aperture 3.2.1 not importing all photos from card reader

    Aperture is not importing all photos from the card reader, i tried importing 720 photos and it was only seeing 480 photos, the card reader stopped reading, aperture was saying "loading assets", still,  like if it was still reading the card. and the first time it loaded the pictures the import button was not availllable once not all the photos were not all loaded when the loading assets message stopped.
    i  had to force quit aperture, ejecting the card from the reader, aperture, on relaunch was still seeing the card as present but it was ejected from the finder , and  physicaly on the desk.
    i had to go in Apple Acticity monitor to find a process that was still active , someting called mass media and had to stop it.
    my work around was manually copying the content of the card on the external hard drive about  9 gig of photos on the external HDD where i keep my aperture photos.  copying 9 gig of photos over usb2 took an 50 minutes.
    i had jpegs raw and some videos in 720p
    i have a MBP 2.26 ghz 13"
    a Canon 7D and a Lexar 16 gig compact flash card.

    Macuser72 wrote:
    Aperture is not importing all photos from the card reader, i tried importing 720 photos and it was only seeing 480 photos, the card reader stopped reading, aperture was saying "loading assets", still,  like if it was still reading the card. and the first time it loaded the pictures the import button was not availllable once not all the photos were not all loaded when the loading assets message stopped.
    I'm sorry, but I can't understand this paragraph. It seems like the "loading assets" message stopped but not all the photos were showing up in the import window. Were any of the photos duplicates? How long did you wait until you forced quit?
    When you say "the first time it loadedthe pictures" you mean you attempted before and got the same result?
    It does seem like it is either getting stuck on an image or is taking a long time to read the images off the card since the import button is not available...
    When you copied the files to your external drive, you were then able to import to Aperture?
    Thanks

  • .m4a Not Importing Correctly

    For some reason when I import some .m4a files, they do not appear in my libary. Some albums will import while others will not. files with .mp3 import correctly, this is only a problem with .m4a files
    Any ideas? Most of my music is stored as .m4a
    Thanks

    iTunes does not automatically encode/transcode files that you add to your library. The importing settings that you mention only apply to CDs that you rip & encode and other audio files that you want to manually convert to those specifications.

  • VCF/vCard not importing correctly

    This is odd. I have hundreds of vCards and most of them imported correctly into Address Book. But some are dropping many of the phone numbers. The following vCard only imports the NYC number (ending in 3350) and leaves all the others out. But the really odd thing is that if I try to import it again, Address Book shows me ALL the info in the duplicates message/action window. But if I import it, again, it only keeps the NYC number. Entourage imports it correctly, as does the Palm Desktop on my PC.
    BEGIN:VCARD
    VERSION:2.1
    ORG:Bed, Bath & Beyond
    ADR;WORK:;;620 Sixth Avenue b/w 17th & 18th;New York;NY;10011
    NOTE;ENCODING=QUOTED-PRINTABLE:r230HW 800 watt .8 99=0D=0Ar552s 1 cu ft 129
    TEL;WORK:617-536-1090 landmark
    TEL;WORK:508-879-7182 natick
    TEL;WORK:212-255-3550
    TEL;WORK:212-367-8815
    END:VCARD

    ccscambridge.org wrote:
    Well, that completely stinks! I guess I could do the import in Leopard (10.5, I have a laptop still running that) and then just move the address book files to my 10.6 machine? Anyone know how to do that?
    yes, that's possible. import in leopard, quit address book and Mail on both computers and copy the entire folder /users/username/library/application support/address book from the 10.5 computer to the corresponding location on the 10.6 one. start address book there and it will have the same content as the one on the 10.5 machine.
    Thanks for the info. I wish I knew this a few weeks ago when I did the migration. What a pain it will be fixing this!

  • Theme and Template not importing correctly

    I have exported the theme and template file. At the import site the template and theme did not install correctly.
    I can see that it is using the same theme as the source environment, but it will not appear.
    Any ideas?

    You've got two issues going on.
    One- never put anything besides the .dwt template files in
    the Templates
    folder.
    Also- the paths need to work IN the template.
    The images aren't showing here:
    http://www.und.edu/dept/art/Templates/MAIN.dwt
    So dw is making wrong paths to them in the child pages.
    Use the "browse to file" dialog box to pick the images.
    And if any of them are in the Templates folder, use the Dw
    files panel to
    move them.
    Second issue:
    Your dw "site" is defined to a subfolder of the domain,
    /dept/art/ as far as
    i can guess. But you've used site root relative paths in the
    Template. Site
    root relative paths start with a leading /slash. It tells the
    browser to
    start from the domain name's root level.
    Only use Document Relative paths if the site is defined to a
    subfolder of a
    domain. (look for the pulldown in the bottom of the browse to
    file dialog
    box)
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Lightroom 4.3 not importing all photos

    Using Mac, 10.7.5
    Have used lightroom version 3 (now 3.6) with Canon 7d and Canon 5dmk11 with no issues.
    Connect cameras to computer via usb, in lightroom 3.6 both cameras immediately recognised by lightroom import preview pics shown, no issues.
    Ugraded to lightroom 4 (now 4.3) have no issues importing photos from Canon 5dmkii, however seems to be hit and miss with the 7d. Lightroom does not automatically see the 7d, I have to use import and then select the 7d.  On importing the photos sometimes it is fine other times I have a number of photos with a ? and message missing file cannot be located.  Close down lightroom 4, open lightroom 3.6 connect the 7d and all the photos are imported including the ones that had a ? in LR4.
    In the end I stopped using LR 4 went back to LR3, but have recently bought Fuji XE1, raw files not supported in v 3 so back to using LR4, and am getting the same issue. Have deleted and re-installed lightrrom 4 , still some import issues, tried Adode remote chat line, (waste of time, the rep had less idea on LR than I do)
    Please has anybody got any ideas, as to cause or a solution, as this is driving me up the wall,
    Many thanks Neil

    Rikk,
    Thanks for the reply,
    yes I have tried with a card reader and have had some mixed results, but always when I go back to lightroom 3 all the photos are seen and imported.
    I reinstalled LR4 yesterday, upgraded to v4.3.
    I have set up a new catalogue with none of my historic photo's, I will archive those in LR 3.6.
    Have re-installed the latest firmware for the canon 7d,
    Took some test photo's connected camera via usb, had to manually select import, the 7d was listed, then imported pics, no problem this time, need to see if this is consistent. Did the same with the Fuji xe1 and all 12 pics loaded.
    Will try tomorrow with significantly more pictures from both cameras.
    I wonder if there is any issue associated with importing the old catalogue from 3.6 and upgrading in LR4?
    Enjoy New year,
    Neil

  • Elements 11 will not import my photos from backup, please assist !

    I recently purchased a new computer.  PSE8 was my previous version but I did not install on my new computer.  I purchased a newer version, PSE11.  I cannot import my photos from backup !  Please assist me !

    I cannot import my photos from backup !
    I think you have to tell us more. Please tell us exactly how the backup was created, exactly what you are trying to do, and what happens (including any error messages).

Maybe you are looking for