Photostream not working anymore - no clue as to why

Hello all,
So, I cleaned out my macbook a few nights ago to make it fresh for summer. Everything went well except, for some reason, photostream isn't working anymore. iPhoto says I have to 'turn it on in my iCloud-settings'. Problem is, Photostream IS turned on there, but still all my photos are gone.
The complete stream seems to have disappeared. This also goes for my iPhone and Apple TV. I seem to be stuck in an infinite loop and I don't know how to get out of it.
Judging by my iCloud storage-control, my photos are still up there somwhere.
Anyone know how to fix this? I'd like them back...

I cleaned out my macbook a few nights ago to make it fresh for summer.
What did you clean and how did you clean?
If you used a kind of spring-cleaning app, it may have been too eager and cleaned necessary caches where the Photo Stream is living on your Mac.
If the photos that have been downloaded from the Photo Stream are still on your Mac, you should be able to find them in  cryptically named subfolders in the iLifeAssetManagement folder in your user library
/Users/your short user name/Library/Application Support/iLifeAssetManagement/assets/
Are there still photos there? Then make a backup copy of the photos, before they will vanish.
Léonie

Similar Messages

  • After updating my iPod touch 3rd generation to IOS5 some default apps are not working (anymore)

    Hi,
    I updated my iPod touch 3g from IOS 4.x to IOS 5 last week and since then my iPod makes troublle!
    First of all, during the update I did not see any Problems. After the update, I mean the step where the data will be restored to the iPod, I synchronized some APPS at the same time, maybe that was a big mistake. My iPod makes hard resets many times in a loop until it frozes.
    So the only thing I could do here is pressing the home button and the power switch at the same time until it gets rebooted. The sync started again and it looked like everything runs fine.
    As I tried to use iMessage first time I realised the first Problem: I am unable to loginto iMessage with my Apple ID. My Apple ID runs fine, I can by Apps and so on. I also enabled iCloud to see that my Apple ID is ok. But logging into iMessage I put in my Apple credentials and Password, click on next, wait 3 seconds and the screen flips back. So this feature is not working.
    Next issue I see is that randomly my iPod hard resets itself. Even if I don't do anything with my iPod I can see that it resets itself, booting with the apple icon. This happens minimum three times a day... (Exception Type: EXC_BAD_ACCESS (SIGSEGV), Kern_INVALID_ADDRESSat 0x00000000)
    Today I tried YouTube, an internal Application which I cannot reinstall. It's not working anymore, starting YouTube says: Unable to connect to YouTube!
    I have no clue whats going on here because email and web is working fine.
    In my eyes I would like to reset the whole device to a state before running IOS5 and I would try the update again. But my Question is how to reinstall IOS5?
    If IOS5 will not run smoothly on my iPod, I would prefer to backref to iOS4x.
    Is there anyone who could help me out here?
    Thanks,
    Daniel

    Found the rootcause. The battery was damaged and unable to have enough power to keep the device alive. After changing the device problem is solved.

  • IPhone 5S mic and Touch-ID do not work anymore - What to do?

    Hi together and a happy new year to everyone!!
    At the moment I have got a serious problem talking about my new iPhone 5s. As it's a cell phone I would like to talk to my friends and family using it. But it seems that this part of the devices is not working anymore as the mic doesn't record anything. If I try to call someone, they can't hear me while I can clearly listen to what they are trying to tell me. So I was wondering whether this is a "phone-app"-problem only or if the mic does not work at all. So I just use to start the "memo"-app, and: It doens't work either. I have no clue what's wrong with the iPhone.
    I also tried the update to 7.0.4 and even the reset with the same iOS build, but nothing changed.
    So what should I do?
    Now, the second problem is that I cannot use Touch-ID anymore. It used to work without any problems but now I does not recognize my finger(s) anymore and I am not able to scan a new finger anymore...that's really annoying. - Tried the same staff here: Update and reset, but nothing changed.
    Anyone here who experienced the same problem(s)? Any help or good advice?
    Thanks a lot an a happy New Year's day to everyone of you guys out there!!

    I have a same problem, and my iphone is the 4S!!!
    When I turn on the phone speaker, the mic isn't working, after upgrade to ios 6....
    Please help us!

  • Isight camera is not working anymore

    Hi chaps, unfortunately my isight camera is not working anymore. It has worked fine so far, but now the camera is not even listed anymore in profiler hardware list. Hence, no clue what to do.

    marcoalioli wrote: ... What can I do more?...
    Some other ideas in iSight camera failure after OS X 10.9 Mavericks update

  • Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

    Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

    Please take the Mac to  Apple store to have it checked out.
    Genius Bar reservation
    http://www.apple.com/retail/geniusbar/
    Best.

  • Muse not working anymore

    Hello, Alex here
    since the last update Adobe Muse is not working anymore for me. The sites open normally but then the Master Pages don't load properly and it freezes all the time.
    Does it ring a bell for someone?
    Thanks a lot in advance.
    Alex

    Hi Alex,
    Could you please let me know,
    1. What is the size of your .muse file?
    2 Try to duplicate the .muse file, open it, and try to reduce child pages, and see if you get some improvement.
    3. Do you have asset on Network drive, if yes, add these asset to local drive and then use them, see if that helps.
    4. Are you using Mac/Windows?
    Please let me know these details, and I will try to investigate.

  • Satellite U400 - the webcam does not work anymore

    Hello guys here is my sudden probloema!
    About a year ago I purchased a laptop
    TOSHIBA - Satellite U400
    with s.o. WinVista 32bit and with integrated webcam chicony etc. ....
    For a year, everything worked correctly, but for some days now, the webcam does not work anymore.
    As soon as I try to open it, a message of management software cam that says "Webcam driver open fail, please restart or computer room"
    I tried to do it all: aggioronato and downloaded the drivers from toshiba, uninstalled the program and re installed the webcam ....! updated bios notebook ....! useless!
    the strange thing .. well that going into device manager ... the webcam is not there ....! but if the launch seems to open just then check quell caz ... Warning!!
    Gan you help me?
    Graziee

    Are you familiar and comfortable with LINUX LIVE bootable discs to load an alternative operating system with unobtrusive but extensive Toshiba device support so you can determine if your webcam hardware is ruined or if the problem is software and possibly solved reinstalling Windows ?
    At this point, you're pondering less time consuming but more expensive choices such as buying another web cam, or another computer and you might be temporarily borrowing someone else's web cam / using a non preferred spare web cam that isn't optimal for your needs.
    Continuously downloading software, registry cleaners, and repeatedly reinstalling drivers will eventually ruin your Windows installation and consume more time than you've wasted so far and still doesn't guarantee to fix your malfunction.

  • TouchPad lock key does not work anymore on Dell XPS L401X

    Hi everyone,
    On my Dell XPS L401X laptop, there is a key to lock/unlock the touchpad. It used to work fine on Windows and on new fresh install ArchLinux, but now it does not work anymore. If I remember correctly, I did not change, configure any shortcut so far.
    Any hint to fix this problem?
    Many thanks!
    Tinh

    Try mapping the button as shown here: https://wiki.archlinux.org/index.php/To … are_Toggle
    I'm sorry i can't help more.

  • TV does not work anymore on Qosmio G10

    Good morning,
    TV does not work anymore, may be due to an update. It has been working OK before.
    When selecting TV option 'TV direct ' with MCE menu, I get the following error message: "necessary files for video display are not installed or do not work properly, restart MCE or the computer". Restarting MCE and / or G10 does not solve the problem.
    -Intervideo WinDVD creator is installed.
    -TV PCI tuner seems to work properly (as per hardware status)
    Which files can be missing? What needs to be done?
    Any help, suggestions, well appreciated.
    Thank you to anyone answering this message.

    Hello Luciano
    Like you know on this way it is not easy to give you precise answer because we dont know what did you done exactly with your Qosmio.
    Please try to use System restore tool at first and roll back the operating system to earlier time. Maybe this will help you and the MCE configuration will be as before.
    Try it at first.

  • My ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

    my ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • DVI port not working anymore after latest BIOS update on T410s

    Hi all,
    after installing the most recent BIOS update via ThinkVantage System Update, the DVI port in my T410s does not work anymore. Nvidia and Intel display drivers are in place, and I also checked the BIOS settings, but to no avail. It appears that the DVI port is no longer recognised by the system at all.
    Thanks and cheers!

    Do you mean the DVI port on the docking station?
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Web gallery is not working anymore, all my galleries gone.

    PLEASE LISTEN! The web gallery feature is simply not working anymore. Not in iPhoto, not in iMovie.

    Why shout at us? We're just Users like you.
    Let them know:
    iPhoto menu -> Provide iPhoto Feedback
    Regards
    TD

  • After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?

    After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?
    VIBAC

    I downloaded and installed
    OS X Lion 10.7.5 Supplemental Update
    and that solved my problem completely. (368 AU plugins now works!)

  • HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

  • Email notifications are not working anymore

    Hi guys,
    I use Grid Control 10.2.0.2 on Windows, and email notifications for critical alerts are not working anymore.
    I didn't change anything to the OMS configuration, it just stopped one day, and when I ask for a test email (in "Setup -> Notifications methods" of in "Preferences") it is successfully delivered.
    I didn't find anything related to this in log files, and nothing that could help here or on metalink.
    Can anyone help about that weird issue ??
    thanks in advance
    Antoine

    Have you gone back over your notification rules?
    have you tried just creating a new notification rule and testing it?
    Also take a look at Note:356774.1. If you've applied any patches (or done partition maintenance) you may have inadvertently lost all your jobs, which will break the email notications.
    If still no joy, then try Note:285093.1.
    let us know how you get on.

Maybe you are looking for