Photostream not working on PC icloud for windows

Since the ios8 update and the icloud for windows update at the same time, I can not get photostream to work on my PC. I have tried all the tips I've found so far-signing out and back in, doing a repair, completely deleting and reinstalling, turning photostream on/off on my phone, and so on.. Sometimes when I do some of these things, a photo or two will be uploaded, but never have I simply taken a picture and it uploaded to photostream on my computer. Now it seems even doing these tricks won't add any new photos. Any tips that I am missing? Anyone else having this issue? Any help would be greatly appreciated.

Same here.
I've always struggled to get iCloud to work reliably. After removing the iCloud software over 12 months ago, I thought it might be worth another try with the latest version. But, only four pictures were downloaded before it gave up the ghost.
I'm using Windows 8.1 (32 Bit) on my desktop and Windows 7 Starter on my Netbook. Same problem on both operating systems.
Regards, Stephen

Similar Messages

Call/video not working between Cisco jabber for Windows and VCS control C40s

Hello,
I've been struggling with no luck how to make a call using Cisco Jabber for Windows 9.6.0 registered to CM 8.6.2 with intercluster ICT to another CM 8.6.2 where we have a VCS Control 7.0.2 via GK H225, and all C40s are registered as H.323.
The VCS has interworking between H323 and SIP, however not sure if there is any problem with that. Assuming it is ok, not sure either if I'm facing any interoperability issue because in my remote site I have C40 (H323 registered at VCS and SIP listening mode) and cisco jabber for windows which is SIP based.
If is not possible, would I be able to change my C40 from H323 to SIP at VCS, or have both H323/SIP registered at VCS? If so, will I need to change as well instead of GK I'll have to establish a SIP Trunk between the CM and VCS?
Another thing I do not believe either I would be able to have one VCS connected with two clusters, right?
I'm just trying to find a solution in case my current topology is not compatible, but feel free if you have any better idea to make it work.
Anyway here is what is happening:
When I make a call from my cisco jabber windows to C40 using alias number. The call is being redirected just fine to the C40 and it rings, however when someoene or the auto answer picks it up, the call dropped right away.
However, if I enabled the MTP in my CSF device, the call gets longer before dropping. I was even able to see my jabber " start video" turns green, before was grayed out all the time and the call dropped faster. I hear a fast busy tone.
I'm able to provide SDI traces, logs, diagnostic sip/h323 calls from VCS in order to know for sure if this is an incompatible issue or something I can workaround.
Let me know if someone of you are interested in read these logs or could point me on the right direction.
Thanks!

Ok,
I have looked at both logs. I have to mentinon though that you didnt
provide the log that shows the h323 setup between cucm and the VCS. This
is most likely because the call originated from a different cucm than
the ones you provided the logs from.
The call would have orginated from the first cucm in the cucm group of
this trunk: Name=RL_TRUNK_VIDEO
The cucm ip will be : 10.252.53.10.
This is the VCS log that confirms where the h323 request originated
from:
pr 10 22:50:29 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:29,187"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="54000"
Received RAS PDU:
Having said that here is my analysis of the logs that you sent..
Jabber sent an INVITE to CUCM and advertised all the codecs (audio and
video it can support)..
Observer that Jabber says it doesnt support G729 anexB
21:55:16.576 |//SIP/SIPTcp/wait_SdlReadRsp: Incoming SIP TCP message
from 10.223.20.73 on port 54677 index 90661 with 2220 bytes:
[862370,NET]
INVITE sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/TCP 10.223.20.73:54677;branch=z9hG4bK000029d3
From: "4122107" <sip:[email protected]>;tag=00059a3c78000011000070b0
-00000e65
To: <sip:[email protected]>
Call-ID: [email protected]
Max-Forwards: 70
Date: Fri, 11 Apr 2014 01:55:16 GMT
CSeq: 101 INVITE
User-Agent: Cisco-CSF/9.4.1
m=audio 19252 RTP/AVP 0 8 18 105 104 101
c=IN IP4 10.223.20.73
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:105 G7221/16000
a=fmtp:105 bitrate=24000
a=rtpmap:104 G7221/16000
a=fmtp:104 bitrate=32000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=sendrecv
m=video 28878 RTP/AVP 97
c=IN IP4 10.223.20.73
++++Now lets observer the capabilites exchange during h245 negotiation
between cucm and VCS++++
Here CUCM advertises its caps to VCS (afterreceiving caps from VCS)
Note that G729A, G729AB, G729 is all advertised..
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,017"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="45660"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= request : terminalCapabilitySet
capabilityTableEntryNumber 2,
       capability receiveAudioCapability :
g729wAnnexB : 6
       capabilityTableEntryNumber 3,
   capability receiveAudioCapability : g729AnnexAwAnnexB : 6
       capabilityTableEntryNumber 4,
       capability
receiveAudioCapability : g729 : 6
capabilityTableEntryNumber 5,
       capability receiveAudioCapability :
g729AnnexA : 6
++++++
After doing MSD (master slave determination, we move to the OLC phas e..
Here we see that the far end..c40 wants to use G729AB for media++++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,783"
Module="network.h323" Level="DEBUG": Src-ip="10.224.114.11" Src-
port="11163"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= request : openLogicalChannel :
   forwardLogicalChannelNumber 1,
forwardLogicalChannelParameters
     dataType audioData :
g729AnnexAwAnnexB : 20,
     multiplexParameters
h2250LogicalChannelParameters :
+++Next VCS sends G729AB as the codec to use to CUCM+++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,784"
Module="network.h323" Level="DEBUG": Dst-ip="10.252.53.10" Dst-
port="45660"
Sending H.245 PDU:
value MultimediaSystemControlMessage
::= request : openLogicalChannel :
   forwardLogicalChannelNumber 1,
forwardLogicalChannelParameters
     dataType audioData :
g729AnnexAwAnnexB : 20,
     multiplexParameters
h2250LogicalChannelParameters :
++++The next thing we get is an OLC reject from CUCM and this is where
th call drops++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,790"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="45660"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= response : openLogicalChannelReject :
forwardLogicalChannelNumber 1,
   cause dataTypeNotSupported : NULL
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,790"
Module="network.h323" Level="INFO": Dst-ip="10.224.114.11" Dst-
port="11163"
Detail="Sending H.245 OpenLogicalChannelRejResponse
+++We then receive a call release from cucm with cause code of 47:
resource unavailable++++
Apr 10 22:50:32 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:32,365"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="50913"
Received H.225 PDU:
Q931
   Message Type: Release
Complete
   Call reference flag: Message sent from originating side
Call reference value: 0x7b
   Info Element : Cause
     Location: Usr
   Cause Value: Resource unavailable
   Info Element : User User
   Length = 22
Suggestions:
Change the region setting between the ICT trunk to VCS and Jabber to use
G711 and test again.

Why does Digital Edition not work in desktop mode for WIndows 8?

I have installed the most recent version of JAVA and then downloaded and installed Digital Editions. I can open Digital Editions in desktop mode but when I select a book I cannot turn the page or move to a new page by any means. The only thing that seems to work is to select a new page and then toggle between full screen and partial.

I don't think ADE uses Java at all.
I run it in desktop mode in WIndows 8 and it reads books and turns pages fine: either using the left-right arrow keys,
or clicking on the forward/back buttons each side of the scrollbar at the bottom of the page.
There are lots of bugs in ADE2.0, and even though that isn't a bug for me it may be for you.
Try replacing ADE2.0 with the older but more reliable v1.7.2.
(You can have them both installed at once if you like.)
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172

Keyboard not working properly in safari for windows

I just started using Safari for windows and been using it for a couple of days. Today when I attempt to enter text, the letters will not register on the screen and when I hit the spacebar the screen scrolls down. Very frustrating. I have checked other applications and do not have this problem.

Apple no longer supports Safari for Windows > Apple apparently kills Windows PC support in Safari
Use IE or Chrome instead.

HT6413 I cannot download icloud for windows 7

I am not able to update icloud for windows 7 - I get an error message every time that tells me there is something wrong with the windows installer. I have had Apple support help me and still I have the same issue.

Having same problems as LargeMarge67. Tried everything including your advice to no avail. It gets worse, took I phone and lap top to the Apple Genius Bar at Brighton. Instead of sorting out the Itunes download on my lap top first, they updated the software on my iphone to the new IOS5 via their Pcs. they told me the itunes issue was a microsoft one and I could call apple care when I get home.
Well I did that - on the phone for hours - they told me to uninstall itunes and reinstall. Tried this, and cannot install Itunes version 10.5.1. Version 10.4.1 installs fine but as I have the new Iphone software on my phone which only works with Itunes version 10.5.1 I cannot sync my iphone or restore the phone from backup. Therefore at the mo my phone is useless!!!!!
Great support Apple for letting me walk out of their store 10 times worse than when I walked in. SomeGenius eh - surely he must have known this would be the issue!!!
so guys out there - any ideas how to resolve this - as looks like to get my phone working again, I must download itunes 10.5.1. ahhhh!
PS I am on Windows 7.

I am running Office 2013. Trying to sync my reminders with my iphone using icloud for windows, but it is not working. Can anyone please help?

I am running Office 2013. Trying to sync my reminders with my iPhone 5c version 7.1.2 using icloud for windows, but it is not working. Can anyone please help?

ICloud for Windows Version 4.0 Photostream broken

Following the installation of iCloud for Windows Version 4.0 my photostream has stopped updating on my PC. All shared photostreams appear to be fine. My photostream is still working on myother apple devices and apple TV. I have turned my photo stream on and off, uninstalled and re-installed deleted all of the files in the C:/Users/Name/AppData/Roamin/Apple Computer/MediaStream and uninstalled and re-installed. All with no improvement.
Is this a bug in version 4.0?

This workaround will work until Apple fixes the Windows software issue
You need to add at least one photo uploaded to Photo stream from a Mac first. If you don't have a Mac, login to iCloud on your PC, then either borrow a Mac for two minutes, go to an Apple Store or any other store that sells Macs
1. Make sure you are logged into iCloud on your Windows PC and Photo Steam is enabled
2. Find a Mac (Borrow from a friend or a retailer. You only need 10 minutes or less to do this).
3. Go to System Preferences (The gears icon) or you can select System Preferences... from the Apple menu at the top left of the screen
4. Click on iCloud and log into your iCloud account (uncheck the syncing options)
5. Open iPhoto
6. From the "Share" menu at the top of the screen, click iCloud
7. Click Use iCloud
8. Click on Photos in the toolbar at the left and drag a photo to iCloud under the heading "Shared" in the toolbar
9. Stop sharing and Log Out of iCloud on the Mac (see instruction that follows)
IMPORTANT: When you've copied an image to your iCloud Photo Steam, DON'T FORGET TO STOP SHARING FROM THE MAC AND LOG OUT
a. From the iPhoto menu within iPhoto, select Preferences
b. Click on the iCloud icon in System Preferences
c. Uncheck the "My Photo Stream" box
d. Now go to System Preferences (The gears icon) or you can select System Preferences... from the Apple menu at the top left of the screen
e. Click on iCloud and log out of your iCloud account
IF YOU LEAVE AND FORGET TO LOGOUT!
Change your Apple ID password ASAP
https://appleid.apple.com/
Back at your PC, you need to click on iCloud Photos in the Windows tool bar, then right-click on My Photo Stream and choose "Add photos..."
If you try to add them by dragging to the directory location, as was previously possible with the iCloud Control Panel, it does not work.
NOTE:
You cannot add photos that are already inside the "My Photo Stream" directory by using the "Add photos..." file open dialog. It will add them, but in a very inconsistent way. For example, I tried clicking "Add photos..." and selected 12 photos that were already in the "My Photo Stream" directory, but only 5 were actually added to My Photo Stream and iCloud for Windows only showed the first one, of the 12 images I added. However, when I moved the images to the desktop and then added them using "Add photos...", they all appeared in Photo Stream as expected.

Help I can not install iCloud for Windows 4.0.2

Every time I try to install iCloud for Windows 4.0.2 I receive a error message. Then I try downloading the file install but still no luck. What am I missing? I am using Windows 7 Pro with all other updates installed Core i7 3770K,16 Gig memory,64 bit OS,Service pack 1.

My machine at home actually states that I must use the older version for video to work, but for other installing this version has been a useful workaround for a number of issues, not necessarily limited to the video system, but also compatibility issues with other hardware and software.
See also Troubleshooting issues with iTunes for Windows updates in case you have any troubles pulling out the old software before installing the new.
tt2

I have created an apple id but it will not work on my pc for icloud.How do I sign into icloud?

I have an apple id but that id will not work on my pc for icloud..How do I get an icloud id?

To enable iCloud on your Windows PC,
first set up iCloud on your other (Apple) devices,
then install the iCloud Control Panel for Windows...
From Here > http://www.apple.com/icloud/setup/pc.html

My iCloud for windows is syncing email and notes with my MS Outlook 2013 on windows 8 but NOT contacts and calendar

Dear, I have downloaded and installed iCloud for windows and see that a user has been auto setup in my MS Outlookvia imap. I can now sync email and notes.I cannot sync icloud contacts and calendar with my MS Outlook, can you help me with this?

iCloud hosts the calendars on its server and your various computers read them from there. The protocol for doing this is called CalDAV.
Outlook for Mac has not been equipped with the programming for CalDAV and therefore cannot access iCloud calendars. Outlook for Windows evidently has and can.
This is something only Microsoft can rectify and you could send them feedback suggesting they do this with all convenient speed.
Outlook on a Mac can only access calendars living under 'On My Mac' and these cannot sync with iCloud. iCal can sync with iCloud provided you have 1-.7.2 or higher.

HT4890 Shared photoStream not working for public share

Shared photoStream not working for public share and keep showing the same url for the first shared stream i have published. this means everytime i try to share to anyone else not using an iphone it comes up with page not found. I have also notice the in first initial public url which was given is the same url keeps showing up everytime i try to make it public. how do i reset or change that url so other public share stream will work. how do i get this to work

I've read some posts from users with a similar problem who were able to fix this by changing the download folder (or just click Change next to Download Folder, then click cancel). Not sure if this will work for you but thought I would pass it along.

My iPhone 3GS (working on iOS 6.1.3) has not backed up to iCloud for the past 10 weeks.

My iPhone 3GS (working on iOS 6.1.3) has not backed up to iCloud for the past 10 weeks. And whenever I try Backing up to iTunes or to iCloud via either a pc or a Mac, I get the message: "Itunes could not backup the iPhone because an error occured". I tried turning off all apps for backup, but that did not help. I tried deleting all the photos and that did not help either. I tried the backup trobelshooting and I have tried using different computers. I'm completely stomped.

Hi ShakedG,
I'm not sure if this is what you were referring to, but I just wanted to make sure that you had seen the following article:
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Regards,
- Brenden

ICloud for Windows stopped working with recent update

I had been using iCloud for Windows (Windows 7 64 bit) version 4.0.3.56. I received a notification that there was an update and so I accepted the update (by mistake). It updated to version 4.0.5.20. As soon as the update ran, and I tried to use the icloud Control Panel to set up the syncing of my mail and contacts I ran into trouble. I received the dreaded "Your setup couldn't be started because of an unexpected error."
I tried to restore my pc to a previous restore point, but, that didn't work. So, I completely deleted the icloud software, rebooted, and downloaded the new version and reinstalled it. That didn't work either. Now, I am completely unable to sync my outlook 2007 calendar with my icloud.
I called Apple support and was told "Tech is working in it." I would like to know when there will be a fix... I'm sort of hosed trying to keep track of multiple calendars without being about to use my outlook that I also use for business.

i wanted to add that I had been using 4.0.3.56 for 1 1/2 years flawlessly.

"iCloud for Windows" has an invalid signature. It will not be installed.

09-22-2014
I tried installing the update for iCloud on Windows. I received the following error:
"iCloud for Windows" has an invalid signature. It will not be installed.
I tried to install again but received the same error message. How do I fix this?

I tried to do just the download but I got this error:
"iCloud for Windows" has an invalid signature. The download has been removed.

Photostream not working on my iPad 3 after turning on icloud

Hi All,
Can someone help to identify my issue with photostream not working on my ipad 3 even after turning on icloud on the device? Both my iphone and mac bk pro are working working well on the other hand with photostream. Can someone advise... thanks

When you take a picture with your iPhone, does it appear on your iPad?

Photostream not working on PC icloud for windows

Similar Messages

Maybe you are looking for