Photostream not working on pc with new router installed

I have lots of apple products, and photo stream works between all of them, but struggling with them loading to my pc through photo stream.
It was working, on and off for a while.  Some pictures would load, some not.
We installed a new router, thought it would fix it, now there is nothing!
Any thoughts?
I have windows vista.
some type of linksys router, I can find out if that's relevant.

Not sure if this will help, but you might check your router settings again this:
Recommended wifi settings
Troubleshooting wifi connections

Similar Messages

  • Airport Express not working when used with Broadband Router **HELP!!!**

    Hello.
    I have an ethernet network in my house, and I am connected to the network via a Linksys router for Broadband VOIP and internet. I am on a G5 in my home office and want to stream music to my Airport Express for my home stereo in the living room, via the ethernet connection.
    The problem is that when using the router in my network, only the Admin Utility sees the base station-- iTunes does not.
    If I remove the router from the equation altogether and plug the network ethernet cable directly into the G5, the AX in the other room works just fine and I can get internet on the G5 in the office. The problem is that I need the router to operate my Vonage VOIP phone service and to connect a second computer to the internet as well. The IP address for the router in the home office is "192.168.x.xxx" and when I try moving it to the living room and connecting the AX to it, the Admin Asst doesn't see the AX at all.
    When I connect the router to the network in the office, I can use internet on both computers and the VOIP phone service, and the AX Admin Asst. sees the base station from the other room. But again, iTunes does not.
    Is there a way to configure the router to see the AX?
    Thanks for your help!

    Forgive me if this a little off thread, but I have just managed to get this to work and thought it might help people with similar configuration issues (mix manufacturer wireless networks)
    I received an Airport Express (FW v. 6.3) for Christmas this year. I already am using a D-Link DI-524 wireless(G) router (Rev A FW 1.03) for my Comcast cable modem in my house (downstairs). What I wanted to do is to add the Airport Express in my office upstairs to my network (client mode) so that I could print from my HP Deskjet 3740 printer and listen to iTunes on my stereo through Airtunes. I have two iBooks (G3) with regular (802.11b) airport cards in them) running Tiger.
    I ran into a couple of snags though. I could see the printer in Rendezvou and I could see the airport express in iTunes. I however could not print to the printer or connect to the speakers. I was able to connect to the speakers very intermittenly and then the audio would be disrupted every few seconds.
    After a bit of hacking, what I found is that it seems that WPA PSK security doesn't work between the two. I changed the security to 128 bit WEP (ASCII mode). This means that you need an exactly 13 character pass phrase. This is necessary because Apple (and pretty much only Apple) supports 40 bit WEP (5 chars) and D-Link (and the rest of the Windows wireless universe) supports 64 bit WEP (7 chars), but they both support 128 bit WEP. I assume you could set both up as an open network if you were far enough from your neighbors, but I am in a townhouse complex, so I thought I probably better have some security on the network.
    Now I only see one network (the one set up on my D-Link router) and I can print to my printer and stream to my stereo through iTunes (without disruption). Seems to work seemlessly now.
    I should also mention that I did about three other things. I moved the LAN subnet on the D-link router to 192.168.1.1 (DHCP client address are now between 1.100 and .1.200) I had heard that this was necessary since both routers tried to use the 192.168.0 subnet, but I think this is only necessary in relay mode. I also statically assigned the IP address for the Airport Express. Finally I set up a firewall rule of Source WAN/LAN IP addresses of 192.168.1.100-200 of any protocol from ports 1-20000 to the same destination address range should be allowed to allow for all LAN traffic to be passed. I am very certain this is unnecessary and possible dangerous for security, but I thought I should mention that I did it.
    Hope this might help someone.
    Michael
    iBook G3 (600 MHz)   Mac OS X (10.4.3)   D-Link DI-524 Router. Motorola Surfboard Cable Modem. Comcast Broadband

  • IE 8 Thin App package in not working on system with IE 10 installed

    We have published IE8 thin app package for our users. But today I noticed that after upgrading IE browser to version 10 it is not working. when we launch the application on system with IE 8 than it is working fine.
    It crashes on systems with IE10. Any idea why it is happening?
    Regards,
    VST

    Download the offline installer here: http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg
    If it won't download directly, right click and "Save as"
    Go to: Mac HD/Library/Internet Plugins
    Trash the Flash Player.plugin file from there
    Go to: Mac HD/Library/Application Support/Adobe
    Trash the Flash Player folder (the whole folder)
    Empty the trash
    Reboot
    Mount the DMG and run the installer.
    BEFORE opening any Flash content in Safari, open Safari>Preferences, and check the Security tab to make sure "Allow all other plugins" is checked.

  • Mac App Store not working - first day with new MacBook Pro

    Hi guys,
    I received a new MacBook Pro 13 inch with retina display today and have been working on it this evening but I have a problem: My app store won't open.
    It was fine earlier - I downloaded both textwrangler and notepad - but now, whenever I click on the icon in the dock it bounces for a few seconds before simply showing a blank screen.
    I have uninstalled my downloads from the day in the hope that it would prove to be a fix but nothing has happened. I live in the UK so it's too late for me to ring the store - it's past 10pm here - but I was hoping somebody could help me out!
    Also - My iTunes doesn't work - whenever I try to purchase an album or listen to any music an error message pops up reading 'an unknown error occurred.' I'm not sure if the two problems are linked...
    Any help will be greatly, and gladly, appreciated!

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Safety Cameras not working on E7 with new map upda...

    Since updating the maps on my Nokia E7 yesterday the Safety cameras are no longer showing. Traffic info is working fine. I restarted the phone, have the switched cameras off and back on, I have deleted the camera data file called 1.0.0.602europe.cdt in the E\Cities\diskcache\safetyspots directory on the mass memory of the phone and restarted maps to reload the file, but still not showing cameras.
    They were there before the update when opening Nokia Drive
    I would be obliged if anyone has any ideas.
    Solved!
    Go to Solution.

    rsjuk wrote:
    I have deleted the camera data file called 1.0.0.602europe.cdt in the E\Cities\diskcache\safetyspots directory on the mass memory of the phone and restarted maps to reload the file, but still not showing cameras.
    Whilst deleting this is fine, you would need to reload previous version such as 1.0.0.579.europe.cdt and make sure that Nokia Maps application remains "Offline" otherwise it will reload 1.0.0.602.europe.cdt. This has happened before, but issue may not be rectified quite so quickly as Symbian a fairly low priority now.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • ServiceDesk software not working as expected with new Firefox version

    After recently upgrading to Firefox 5.0, I have discovered that the ServiceDesk software I use with Firefox no longer works as expected. This software is ManageEngine ServiceDesk Plus 8.0. The problem is irratic but unique to Firefox. I don't have this problem with Chrome or IE.
    The problem is this: When I open an issue, several fields become active, one of which is the description field where the user who sent the issue typed the description of their problem. When editing the issue and the active fields become active, sometimes this description field is completely blank, meaning their description is gone, but not really. I have to close the page and try to re-open hoping this time, the description will be shown. Also, there is a tab for me to enter a resolution when I want to close it. I cannot enter anything in this field, or rather I can, but when I save it, nothing gets saved to this field, so the user doesn't get to see my resolution. The default font for ServiceDesk is Arial, but I know something is amiss because the default font is Times. If the font shows as Arial, then I know everything will be okay.

    I knew I would figure this out as soon as I posted it...
    This is the behavior you see if the SamAccountName field is not included.

  • Cd Drive not working even after a new drive installed.

    Hello
    About a month ago i had problems with my cd drive, it wouldn't burn a cd and every time i tried it sounded like the computer was going to take off! I took my computer to the genius' and it was supposedly fixed with a new disk drive put it. BUT i am still having the same problems! is there any way in which it may be a software issue as i am still having the same issues and they are actually getting worse!
    Please Help!
    Thank You!

    You should go back to the genius who installed the new drive.  The repair will be under warranty.
    Bob

  • My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. Help.

    My ipod 4G won't connect to my wifi at home with new router. Says "unable to connect" and won't give me any other options. Have tried resetting network connections. I don't want to lose anything. I have tried turning everything off and back on again. Desktop and laptop are working fine. Sometimes it turns on suddenly and I can use it for like 20 mins but then shuts off again. Same thing is happening with my dad's iphone, Help.

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • HT4890 Shared photoStream not working for public share

    Shared photoStream not working for public share and keep showing the same url for the first shared stream i have published. this means everytime i try to share to anyone else not using an iphone it comes up with page not found. I have also notice the in first initial public url which was given is the same url keeps showing up everytime i try to make it public. how do i reset or change that url so other public share stream will work. how do i get this to work

    I've read some posts from users with a similar problem who were able to fix this by changing the download folder (or just click Change next to Download Folder, then click cancel).  Not sure if this will work for you but thought I would pass it along.

  • IPhone 4s back camera not working even after buying new iphone 4s

    Back when the ios 6 updates were coming out  in 2013 my iPhone 4 back camera stopped working, after trying way too many ways to reset the phone  and  finding others with this same issue I decided to start over I bought a new iPhone 4s so this one was better and 32gb instead of 16gb and it was 9 days later the back camera stopped working on my NEW iphone and still doesn't work to this day? What on earth should I do? How can this be fixed? I've tried hard reset, backing up the new phone, all the tricks I've tried on both phones do not work!!

    A new phone has a warranty.  So take it to an Apple store.  If they can't fix it, they will replace the phone.  Or do you mean: it stopped working after 9 days, but then you waited until the warranty ran out and then ask us?

  • EYETV LITE WILL NOT STARTUP WITH NEW MAVERICK INSTALL

    eye lite will not start up with new maverick installed untill you unpluge usb then reinstall.

    Well, I download the driver for Windows 8.1 64 bit, it appears to down load then says extracting and the bar goes along to 100% then nothing. There is no option to install the printer wirelessly, the printer does not appear in the devices and printers, the Scan Doctor tries to fix the problem and just says need to install the wireless facility by using the manual when I select the wireless option. As I said, I can plug in USB and use printer fine but what is the point of having wireless if it doesn't work? Printer worked fine when installed on Home Hub 2. Got a new lap top and still  no problems. Problems started when had to have new Home Hub as the broadband connection kept dropping out. BT sent HH3 as don't do HH2 any more. Realised that the printer was still holding the details of the old hub but couldn't find a way of changing this. Reset printer to factory wireless settings so not holding these now. Cannot use CD to load printer as doen't work with Windows 8.

  • Photostream not working on my iPad 3 after turning on icloud

    Hi All,
    Can someone help to identify my issue with photostream not working on my ipad 3 even after turning on icloud on the device? Both my iphone and mac bk pro are working working well on the other hand with photostream. Can someone advise... thanks

    When you take a picture with your iPhone, does it appear on your iPad?

  • HT4995 My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?

    My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?

    lbryan1987 wrote:
    I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
    You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
    there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
    Seriously? It's physically broken!

  • Hi! I am having a problem with my dictation. It works fine with Greek but it does not work at all with English. Anyone knows why?

    hi! I am having a problem with my dictation. It works fine with Greek but it does not work at all with English. Anyone knows why?

    Have you changed the system voice to an English one in system preferences?

  • Auto backlight does not work on 4S with iOS 7! With iOS 6.1.3 I had the same problem.Why?

    Auto backlight does not work on 4S with iOS 7. I had the same problem with iOS 6.1.3! Why ?

    rlwebb71 wrote:
    ... I have the latest generation iPod touch, not the 5, but the latest. So why can't Siri come out and play? 
    Siri is not a feature of that iPod... 4th Gen...
    iOS 6  Which Software for Which iDevices...
    http://support.apple.com/kb/HT5457

Maybe you are looking for