PhotoStream question/Issue

I had just set up my Iphone 5, but photstream is not doing what I expected. I expected to have all my photos streamed not downloaded to the iphone.
I have an old Imac that is using an with old version of iphoto(no streaming), I have an Ipad 2 that I sync with the Imac. all my photos are on both imac and ipad.
On my Ipad I can see all the photos via the stream tab. so They seem to be on the icloud (set via the photos on the ipad). why wont the iphone see those?

Is you new phone signed into the same iCloud account as your iPad, with photo stream enabled? If so, you may not be getting the photos because photo stream only retains photos for 30 days. After this they are removed from your photo stream but not from any device that has already received the photo stream photos (like your iPad). If all your photo stream photos are older than 30 days they are no longer in your photo stream to be receive by your new phone, even though they remain in the photo stream album on your iPad. If that's the case, try taking a new photo with your iPad as well as you phone and see if these are successfully streamed to the other device.

Similar Messages

W540 Questions & Issues

Hi Folks,
Questions & Issues:
1. Where is the Break key on the W540?
2. My W540 locks up about once every two days - there does not appear to be any common task that causes this. When it lock nothing works, not Ctrl+Alt+Del, I must power off with the power button. Any comments or suggestions?
Observations:
I'm not a fan of the new keyboard. For example, the F1..F12 keys are difficult to read (the F parts, not the pictures) and the off center feel leads to difficult typing (at least for me).
TIA

Hi SD
1. Try Fn+B for Break
Refer to this post for more information.
1.2.
2. Go to Start > Lenovo > System Update. Install all Critical and Recommended Updates.
3. If No.2 does not work, go to Task Manager > Startup > Try uncheck a few which is optional. Do not uncheck Lenovo Stuffs and Antivirus.
Peter
ThinkPad W520 | ThinkCentre E73 SFF | IdeaPad K1 | IdeaPad Yoga 11s | Miix 2 10" | 3000 Y300
Give kudos to reward people for their assistance | Mark thread solved if the solution works | Please do not send me an e-mail regarding technical questions | I am not an Lenovo employee
=====================================
Dolby ; IdeaPad Slate Tablet

... several questionable issues ...

Hello everyone,
Issue 1 - Is there a search function to narrow the 12000 topics to handful I can manage?
Issue 2 - Is LightRoom a better (faster, more specific with metadata, and speedier) than Bridge for a cataloging/browsing tool?
Issue 3 - In LR, we've discovered we can catalog audio interviews by using the .wav files and giving them the same name as the image of the person being interviewed. (JimmyPic01.tif is paired with JimmyPic01.wav, JimmyPic02.tif is paired with JimmyPic02.wav - we give the image the metadata about the date and time of the interview, etc.) Now, is there a limit to the size of the .wav file associated with an image? Will our researchers be able to click on the .wav file and listen to the entire interview? Is it possible to alter the program used to open the .wav files in order to permit fast forward and replay functions? Does the audio player in LR permit those functions?
Issue 4 - Does Adobe build a catalog package with the elegance of LR (pleasant-looking interfaces and speedy searches) and the simplicity and power of Bridge (catalog audio, video, and documents)? Does LR permit the creation of metadata fields as easily as Bridge?
I guess many of these questions will get answered if I simply install a copy and play a while. . .?
Okay . . . I'm off to see the download wizard. . .
I'll come back and let everyone know what I find as well as see who contributes to my quest. . . (grin)
Until that time. . . Earl J.

Hello Wolf,
Horace Walpole once stated
The whole [Scotch] nation hitherto has been void of wit and humour, and even incapable of relishing it.
So, perhaps this Lightroom forum is more like Scotland than is evident at first glance... (grin) I'm not familiar with the source of your quote... most professionals don't get that status until they have practiced their craft for many years... so, consider me a
professional-in-training ... or
amateur, if you like.
Yet, another misunderstanding on the readers' part... I am fully aware that my comments here on the forum would draw as much attention from Adobe to ban me than my opinions on global warming would attract the attention of the new administration in DC... I was addressing the three initial responders to my original post and inviting them to do what they will to avoid my intrusions.
My questionable issues revolved around issues of the program which caused me to ask questions for further clarification - there were never any
objectionable issues raised... simply a few questionable ones.
I have no intention of letting anyone drive me away while my curiosity for the program is still fresh and vibrant. I'll continue to be me and will permit others to be who they are ... I have no expectations about any aspect of these forums except that most subscribers come here 1 -
to learn and 2 -
to help. Finding and making friends might be an ancillary benefit, but for the most part, I would suspect not a primary objective.
I base my knowledge on forum, email distribution list, and listserv memberships as the creator/moderator of a librarian forum that has recently moved past its decade-old mark... and the current host of several social networks.
So, although I am new to
this forum, I am not new to participating in them. I can appreciate the fact that many may not, and will not, accept my approaches to bulletin boards and email interactions; however, it's a big forum, and I am not required, or inclined, to follow any personal preference demands, content restrictions, or behavioral limitations of anyone outside the Terms of Use.
So, I'll do the best I can at adjusting and adapting in order to get help and give help - but for those who demand the rest of us adjust to their expectations and behavioral norms, they'll have to do a bit of adjusting and adapting themselves ... if nothing else, just to demonstrate they
can do something that they demand of others.
@Wolf, thanks for the advice and the encouragement ... I will consider it seriously.
Thanks for taking the time to respond and compose such a considerate response... I'm a retired Army paratrooper, so
bail out has such a negative connotation to me - even before the economic crisis began - so I'm not about to leave until all the questions I have are answered.
Until that time. . . Earl J.

Syncing Audio with Merge Clips option and OMF export question/issue

Hi,
In the past when I've edited video, when it came to syncing audio I always did it manually. This time, using Premiere Pro CC, I used the merge clips option, to speed up the syncing audio process, which was a huge time saver with excellent results.
The question/issue I have..is that when I get my OMF exported for my sound editor, will this screw anything up, since on the project file, it doesn't use the original audio file, but the one that was merged. And in the project list, I don't even need to have the original audio file listed, since it's already been merged into a clip, which I used in the project. I know it's the same file used, but will it mess anything up since a merged clip audio was used instead of just dragging the original track onto the timeline?
- Ken

A good way to know for sure (and therefore feel comfortable that you're doing the right thing) is to do a test OMF export, then open this in Audition. This ill show you exactly what you're exporting.

Photostream question (Mavericks, ML, MBP, Mac Pro and iPhone)

hi all,
i am posting the dialogs from Aperture enabling various aspects of Photostream/iCloud (mac pro and ML at the top and MBP and Mavericks at the bottom) and i am having a devil of a time figuring out how to manage all of this. i take a /ton/ of pictures on my iPhone and i seem to have a multiplicity of issues i can't solve by googling. i have read what i can find in the help and faq sections.
i should also say that while i SYNC my phone via iTunes on my MBP i /import/ photos into Aperture on my desktop machine which is a Mac Pro. i keep a small library in Aperture on the MBP and do check some of the folders to sync to the iPhone. i find this easiest since i am have a big Aperture database that i keep on the large HD on the Mac Pro but for customizing Apps, synced images, music etc i find it easier to manage on the laptop.
anyway, i have the following problems/questions:
1. do i need to SYNC my iphone to my Mac Pro with some frequency and physically import photos into Aperture in order to not LOSE the photos off the phone after some period of time? i mean, i /don't/ do this with an discipline and i have been assuming that they all remain there in a "monthly dated photostream" folder /until/ i do a physical import from the phone but something i read recently caused me to think that there is a 1000 image limit and that anything NOT IMPORTED by a certain timeframe means photos will basically get bumped off the phone never to be seen again if they are not physically imported.
2. can i leave images in a monthly dated photostream folder (on both the laptop and desktop machines) and basically never touch them - assuming that i am also IMPORTING these images into projects into Aperture?
3. i have an "iPhone Sync" folder in Aperture and i have selected this folder to sync via iTunes with my iPhone. however, when this folder gets to the iPhone the images in here always seem to be mixed up with other images that i took ON THE PHONE. so if i have images on the laptop that i dropped into a folder and synced /to/ the phone - is there a way to keep these separate from what i am seeing on the phone in terms of photos i took on the phone? when they get mixed together it is so confusing i can't figure out what is happening and i can't find anything. i would like to keep the synced images independent of the images shot on the phone.
4. is there a Idiots Guide to Photostream on the iPhone that someone can give me?
A. i am seeing a "Photos" icon and when i hit this it seems to show me a YEARLY list and then in the yearly list there are DATED groups. my most recent dated group shows /locations/ as well and i am not sure if this is an option or what. ALSO, why are images that i synced in a folder on my is there a way to delete these images? is it possible images that were synced from my laptop are showing up in here and if so is there a way to prevent this?
B. Albums are showing "Camera Roll" "My Photo Stream" as well as "Events (from my mac)". Event (from my mac) is supposed to show Images in Projects that were SYNCED from my laptop and Camera Roll (390 images) is supposed to show images taken on my iPhone since the last import if i deleted everything on the last import? Does My Photo Stream (1000 images) somehow show all the images in Camera Roll (taken on the iPhone) AND somehow /some/ of the images synced from my laptop in some way? i mean, this is what i think i am seeing but it is uber confusing.
THANKS for any help on this,
jonathan

Other manufactures do not mention software for booting from their PCIe SSDs
http://www.sonnettech.com/product/tempossd.html?tab=1
http://eshop.macsales.com/shop/SSD/PCIe/OWC/Mercury_Accelsior/RAID
http://www.apricorn.com/vel-solox1.html

Adobe Photoshop Touch Question / Issue

Hello,
I bought Adobe Photoshop Touch some time ago for my Samsung Galaxy Tab 8.9 and I liked it so much. Of all the apps I had for photo editing, this one gave me all I need. I used to own Adobe Photoshop CS2 on my old PC so I wanted something for my tab as well. I was very satisfied by this app until my tab died some time ago. After a pain of service and repairs, the tab worked again but it had a new issue. Anytime I used the device on something more demanding (i.e. playing games ) the tab overheated a lot and the screen started to touch itself very much as, if it was pressed all the time. After some time of struggle with it I decided to wipe it clean and pass it out to a family member who would maybe dedicate more time to fix it.
Last month I bought myself a new device ( Sony Xperia Z ) and I was eager to get all my data on it and apps of course. To my sadness Adobe Photoshop Touch is not compatible with my device now, and it just sits there in my app list doing nothing . I could install only Photoshop Express but it does not give me the full access I had with Touch. I saw that there is another product called Photoshop Touch for smartphones and it seems to be the same as what I had only phone edition.
My problem is that I can not get this new app unless I pay for it and I do not wish to do that because I already paid for the previous edition.
My question is: Can I somehow obtain the Smartphone edition and the previous version ( which apparently is for tablets I suppose ) be removed from my Google Play account. I would purchase the smartphone version but there is no point in having 1 app 2 times.
I would happily like the staff to remove my previous version from my account if they would gave me the smartphone version and I acknowledge that the tab app was more expensive than the smartphone version and Adobe will not refund me the money difference nor are they obligated to give me the smartphone version. I am just asking if it would be possible because I like that app and it's such a shame for it to be in my app list and not be used. Thank you for your time in reading this and no matter what answer I get, I will be ok with it. Have a nice day .

I don't think you'll have much luck. PS Touch for tablets was designed for just tablets; PS Touch for phones was designed for just phones. Touch for phones came out a little later than Touch for tablets. (By several months, if I recall.) On the brighter side, if you ended up buying Touch for phones, you'd be covered no matter which device you had.
Both are very similar in function. I believe the only differences are their UIs; Touch for tablets is landscape-oriented-specific while Touch for phones is portrait-oriented. (Some elements are also placed differently.) I imagine this allows for maximum utilization of screen real estate and element placement.

WD Java iView Creation Question/Issue - CE 7.1 EHP 1 Trial

Hi all,
Im posting this question here seeing as that the issue has arrised on an installation of the AS JAVA and EP shipped with CE 7.1 EHP1 Trial.
When attempting to create an iView for a deployed custom WD Java app on the trial Portal I am taken straight to the iView template selection without being given the options for iView creation( ie. create from template, portal component or WD Java app). Is this by design ( WD Java iView creation has changed from previous Portal versions or is limited in Trial installation), is this an issue with the components shipped with the Trial or an issue on my installation only?
Currently my only solution for deploying WD java content is to copy the actual application and paste it as Portal content which then creates a WD Proxy page with a single WD Proxy iView (that of the copy pasted WD app). This is fine for single app scenarios but becomes an issue with multiple apps on one page and drag and relate scenarios.
Kind regards,
Willem.

Hi Williem
Please check the SAP CE 7.1 EHP1 documentation for more information.
[CE 7.1 documentation|http://help.sap.com/saphelp_nwce711/helpdata/en/44/d958673ef05f4de10000000a11466f/frameset.htm]
[CE 7.1 iViews |http://help.sap.com/saphelp_nwce711/helpdata/en/f5/eb51590e6a11d7b84900047582c9f7/frameset.htm]
Hope this will helps you.
Thanks
Arun Jaiswal

2 iTunes questions/issues

I had to recently reinstall Snow Leopard, now I have to issues. 1) when I double click on songs in my iTunes the music doesn't play. I have to right click and then hit play, how do I enable double click again? 2) my iTunes is now set as my default internet music player, how do I change this? 3) a General question, my DSL was with Verizon, now that has been transferred to Frontier. When navigating to web sites it seems that there is an issue with Frontier & Safari. How do I know this? I changed my PC to Safari from Explorer and now I am having the same issue on both my iMac and PC...no wonder they were trying to push me to Foxfire. Is anyone else having this issue, and have you been able to resolve it?
Thanks, I appreciate your help!

iTunes search for devices only once, I have this 'problem' too and I always need to close and re-open iTunes

IPhoto '11 Questions / Issues

I upgraded to iPhoto '11 as soon as it became available. As I have been working with it and trying to update all of my old photos with titles, descriptions, locations, etc, I have found a few things that either are bugs with iPhoto, or I just haven't figured out how to do them yet.
First, when setting a location on a photo, the only way I have found to do it is to go into the info screen, then use the small map in the corner to place the marker. Is there a way to get a full-sized map when locating photos?
Second, I have been having some issues with Faces. When I am looking in the info screen for a picture, some pictures show that I have xx number of unnamed faces, where xx could be any number. However, when I look at the picture, I can't find any spot in the photo where there is the box around a section of the photo with the "unnamed" label below it. Why is it showing that I have unnamed faces if there are no markers on the photo?
Also with Faces, I have tried using the feature where I can look at and name 5 pictures at a time. I have 2 questions with regards to this feature. First, is it possible, especially while in full-screen mode to look at more than 5 faces at a time, and second, why does it keep having me rename the same photos over and over again that are all from the same photo?
And finally, another Faces issue, after I mark some Faces through the feature where I name multiple faces at once, I have looked at some photos and it shows a person's name, but it will have the box around a completely different person? Any ideas?
Thanks in advance.

Welcome to the Apple Discussions. Regarding the locations see my post HERE.
Can't help you with faces as I don't use that feature.
Happy Holidays

More XControl questions / issues

XControl 1, X1, has two other XControls, X2 and X3, on its
block diagram
When I open a VI with X1 on it, the Init ability is called
for X2 and X3 three times each. X1’s
Init ability is called one time. (The
other VIs you see pop up are called from X2 and X3 as a result of Init
executing, so they illustrate the Init calls.
They close when Uninit is called, and you can see as much when you close
the VI and project)
When I close said VI, the Uninit ability is called for X1
and called twice for X2 and X3. This, of
course, leaves one instance of X2 and X3 left open. Consequently, references and VI’s I opened as
a result of the Init call are left open (you notice the two subvi's still open).
Once I close the project, the Uninit abilities are called
for X2 and X3, closing the remaining resources.
There is a file in the folder called log.txt I write to in
the init and Uninit abilities for each XControl. If you open it after each step you can see
what I’m talking about.
Additional things:
After I close the VI, but not the project, X2 and X3 are of course
locked. When I right click “Unlock this
library for Editing”, LabVIEW crashes with a .cpp error. http://forums.ni.com/t5/LabVIEW/Error-when-I-Unlock-Library-for-Editing-with-XControl/m-p/1009044#M4...
My real project loads the XControls (and executes the Init ability) as soon as it opens for
some reason, and makes it nearly impossible to edit them unless I close and open the
XControls individually, due to the .cpp error above.
Questions
Is it expected that an XControl an another XControl should be called more than once?
Why don't they get unloaded when the main XControl is closed and unloaded?
Why the .cpp error?
Tim Elsey
LabVIEW 2010, 2012
Certified LabVIEW Architect
Attachments:
XControl Forum Test source.zip ‏165 KB
XControl demo video.zip ‏3598 KB

Hello elset191
Here is the Corrective Action Request that references your issue. I have included you as a customer whom this problem is affecting.
Request #: 302463
Description: XControls remain open after corresponding VI is closed and crash occurs, XControl cpp error in LabVIEW 8.6.1f1 (Fatal Internal Error: "ThEvent.cpp", line 184)
I'm sorry that this has been a frustration to you. The fastest way to resolve this issue appears to upgrade. Have you attempted to reproduce this error in LabVIEW 2010 SP1? I was unable to reproduce this situation in LabVIEW 2010 SP1.
The CPP error is due to some issue with how this has been internally developed. It appears to have been resolved in LabVIEW 2010 SP1 as do the other issues you have been dealing with. Can you please confirm this for me? I am happy to further address this issue to ensure your success. All the best!
P.S. I have provided a link to the LabVIEW 8.6 Help simply for competeness.
Editing XControls that are in Use
http://zone.ni.com/reference/en-XX/help/371361E-01/lvhowto/editing_xcontrols_in_use/
Sincerely,
Greg S.

Security question issues

I recently update my iPod touch 4g to the latest IOS 6 ... And since then I got lot of issues, starting of with the fact that iTunes store change lenguage again by itself, also the app store change the lenguage, which I set in English (I live in Tokyo Japan.. but Iset my app store and itunes store in english)... so since the app store change itself, I'm continuosly asked for an apple ID security thing... (I research a bit online and turns out to be that they are asking me for 3 security questions) and due all the app store is in japanese I can't set anything.... and also I can't download anything, since I don't provide to Apple ID the questions...I don't know if someone else is having this same issue... but I will appreciate your help, please
thank you

For the security questions see this previous discussion:
HT1491 How do i get the security...: Apple Support Communities

PhotoStream Question

Ok, this is driving me crazy. I have PhotoStream enabled on my iPhone and MacBook Air, all PhotoStream pictures show fine on my iPhone (63 pictures) but only 42 show in iPhotos (Photo Stream) on my MBA, why is that?
Thanks!

Thank you for your reply. I'm sorry. I read your reply and realized I had made a mistake in my original question. The photos I want to move are in an album in iPhoto and I can't get them to move into Photostream, where I could then transfer them to my iPhone. I checked my iPhoto preferences and they seem to be correct. Any suggestions?

TS3989 Windows 7 Photostream folder issues

For some reason a month back my folder quit populating with the photos take on my iPhone 4s.
I've reset Photostream system and double checked with all support literature regarding this to no avail.
I do have two Apple ID's that merged on my phone by reinstalling apps from itunes since I upgraded from the iPhone 4. The timing did not conincide with anything about that issue - as it was that way from the start. This photstream problem began a month ago. I go the phone 5 months ago and the photostream worked great.
is that possibly the problem?

I have resolved the Unknown Device problem. After a lot of searching on Google, I found the exact driver I needed:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4GXPEG
It is listed at, http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70443 but installing it before didn't fix the problem. Some how it got fixed when I tried it again.
ISSUE #2: SOLVED.
Would appreciate some help on #1 and #3 especially from someone that works at Lenovo.

Captivate 5 knowledge check vs. quiz question issue

I would like to include question slides in my Captivate 5 project that do not score and are just used as quick knowledge checks. I also will have a quiz at the end that will score and report to our LMS. I have tried a number of things, but none are taking the knowledge check questions out of the question total or the review quiz functionality.
I have tried marking the knowledge check questions as "survey" instead of "graded," and unchecked "report answers." I don't see any other options available to me. When I press F9, I cannot edit the question settings. It looks like the Object ID may be causing my issue (since it is the same ID as the main quiz), but it doesn't seem like I can change that.
Any ideas?

When you say the survey questions are not being excluded from the quiz, are your talking about the progress captions that say Question X of Y?
If so, you should be aware that you can turn off these markers and create your own by inserting captions that use Variables and Advanced Actions to calculate the question number.
If you've set the score for the survey questions to 0 and unticked the box to prevent them from being included in reprorting, they shouldn't be affecting the overall pass/fail score for the user.

Can't reset my password thanks to slow email and security questions issues.

I'm trying to reset my password on my Iphone so I can update my device and apps, but I forgot my password. So I decided to reset, using my username, but I never recieved an email to do so. I tried the security questions, and everytime I try to enter my birthday, the site keeps reseting me back to selecting my brithday. So in a way, there is no way I can reset my password? How do I fix this issue?

See this for contacting Apple security: http://support.apple.com/kb/HT5699
Although your logic escapes me. YOU made several mistakes, including your security questions, not having a rescue email address, and having a weak password that someone guessed. And you expect Apple to bail you out of the predicament that YOU created instantly. They probably will, but it isn't something that you should expect.

PhotoStream question/Issue

Similar Messages

Maybe you are looking for